Harden Steel Spur Main Gear 50T 32P 0.8M for Traxxas Slash Stampede Rustler 4x4 6842
Asin: B08JPVGD1H | Model: SSLA050T-BK | PartNumber: SSLA050T-BK | Ean: 0747992974147, 8435315928855, 0747992978329 | UPC: 747992974147, 747992978329
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Hard Steel More Durable And Cool.
What You See In The Main Picture Is What You Will Receive.
Will Fit Slash 4X4 Rustler 4X4 Stampede 4X4.
Features
- Original number 6842
- Will fit Slash 4X4 Rustler 4X4 Stampede 4x4
- Hard steel more durable and cool
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Dimensions: 0.50 x 2.00 x 2.00 inches
See On Amazon Similar To Harden Steel Spur Main Gear
#1
DJEMPPS Tree Climbing Spikes Set, Adjustable Tree Climbing Spike 2 Gears and Non-Slip Pedal, Tree Climbing Spikes Tool for Climbing Trees, Picking Fruit, Outdoor
Asin: B0BBV424WQ
ðŽãErgonomic Structure & Height AdjustableãïŒ Adjustable High Impact Plastic Molded Cuff With Integrated Padding Provide For Maximum Comfort. The Height Can Adjustable From 15.35-17.72In(39-45Cm). Ergonomic Construction Distributes Pressure, The Tree Climbing Tools Maximum Load Capacity Is 100Kg(220 Lb)..
ðŽ ãGreat Customer ServiceãïŒOur Tree Climbing Gears Are Designed For Tree Climbing Or Pole Climbing For Fruit Picking, High-Altitude Logging, Jungle Survival, Wild Adventure, Hunting Observation, And More. And If You Have Any Questions, Feel Free To Contact Us For Satisfied Solutions. Professional Customer Service Is Always Online For You..
ðŽãHigh Quality MaterialãïŒ Djempps Tree Climbing Spikes Are Made Of High-Strength Stainless Steel, Which Is Anti-Rust, Wear-Resistant. Besides, The Claws Are Sharp And Hard Enough To Ensure Safe And Efficient Piercing Through Climbing Trees. It Is Recommended To Practice Until You Are Proficient In Using Spikes Before Climbing Higher And Wearing Other Protective Equipment..
ðŽãSafe & ComfortableãïŒ Our Tree Climbing Gears With Sharp And Wear-Resistant Stainless Steel Claws And Antiskid Pedal, It Is Safe For Climbing Trees. Adjustable High Impact Plastic Molded Cuff With Integrated Padding Provide For Maximum Comfort. Besides, The Footpegs Are Wide And Thick To Support Your Feet Powerfully. Have Fun With Your Garden Helper!.
Features
- Package Info & Quality Assurance DJEMPPS Tree Climbing Spikes Set include 1 pair of tree climbing gears ,1 waist protective belt, 1 back strap, 2 foot straps , 2 ankle strap, 1 pair of climbing gloves. Pole climbing gears set material is 304 Stainless Steel; Belt material is polypropylene fiber; Rope material is nylon.
- Safe & Comfortable Our Tree Climbing Gears with sharp and wear-resistant stainless steel claws and antiskid pedal, it is safe for climbing trees. Adjustable high impact plastic molded cuff with integrated padding provide for maximum comfort. Besides, the footpegs are wide and thick to support your feet powerfully. Have fun with your garden helper!
- Ergonomic Structure & Height Adjustable Adjustable high impact plastic molded cuff with integrated padding provide for maximum comfort. The height can adjustable from 15.35-17.72in(39-45cm). Ergonomic construction distributes pressure, the Tree Climbing Tools maximum load capacity is 100kg(220 lb).
- High Quality Material DJEMPPS Tree Climbing Spikes are made of high-strength stainless steel, which is anti-rust, wear-resistant. Besides, the claws are sharp and hard enough to ensure safe and efficient piercing through climbing trees. It is recommended to practice until you are proficient in using spikes before climbing higher and wearing other protective equipment.
- Great Customer Service Our Tree Climbing gears are designed for tree climbing or pole climbing for fruit picking, high-altitude logging, jungle survival, wild adventure, hunting observation, and more. And If you have any questions, feel free to contact us for satisfied solutions. Professional customer service is always online for you.
- See more on Amazon...
Brand: DJEMPPS | Manufacturer: DJEMPPS
See On Amazon #2
Upgrade Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT E-REVO 2.0 New MAXX XO-1-1 pc
Asin: B076CMVC42 | Model: B076CMVC42 | PartNumber: B076CMVC42 | Ean: 7849717313118
50 Tooth Hardened Steel Mod 1 (1.0 Metric Pitch) Spur Gear For The Traxxas E Revo2, X-Maxx 6S And 8S, Maxx 4S And Xo-1.
With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins. Refer To The Traxxas Manual For Instructions (Ref. Pg.22 - Adjusting Gear Mesh).
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon #3
Hot Racing SLTN60M5 Steel Main Gear 0.5module 60 Tooth Latrax Rally Teton
Asin: B01EILWTW8 | Model: SG_B01EILWTW8_US | PartNumber: SG_B01EILWTW8_US | Ean: 0083745969030 | UPC: 083745969030
Hot Racing Part Number Sltn60m5; Upc 083745969030.
This Item Works With: Traxxas Latrax Rally, Latrax Sst, Latrax Teton 1:18.
All Hot Racing Upgrade Parts Are Direct Replacements For Stock Components; Additional Parts Are Not Required.
Features
- Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
- Hot Racing part number SLTN60M5; UPC 083745969030
- This item works with: Traxxas LaTrax Rally, LaTrax SST, Latrax Teton 1:18
- See more on Amazon...
Brand: Hot Racing | Manufacturer: Hot Racing
Dimensions: 0.31 x 3.00 x 1.90 inches | Weight: 0.02 Pounds
See On Amazon #4
Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas 1/5 X-Maxx 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/6 XRT 6448
Asin: B073SSMC4D | Ean: 7849717668591
Will Fit 1/10 E-Revo 2.0 Maxx 1/7 Xo-1 1/5 Xmaxxx 6S 8S 1/6 Xrt.
What You See In The Main Picture Is What You Will Receive.
Material Harden Steel.
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins.With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Features
- Original Number 6448 Please check the original nubmer to determin if it fit your car or not
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins.With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Will fit 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/5 XMAXXX 6S 8S 1/6 XRT
- Material Harden Steel
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
See On Amazon #5
Globact 54T 0.8 32 Pitch Metal Steel 3956 Spur Gear with 15T/17T/19T Pinions Gear Set for Traxxas Slash 4x4 4WD/2WD VXL Rally VXL Stampede 4x4 1/10 Summit 1/10 E-REVO Parts
Asin: B088QGFRH7 | Model: 073 | PartNumber: 073 | Ean: 0194852657366 | UPC: 194852657366
Compatible With Traxxas Slash 4X4 4Wd/2Wd/Vxl Rally/Stampede 4X4 Vxl/1/10 Summit/1/10 E-Revo/T-Maxx/Jato/Rustler 4X4 Vxl/Summit/T-Maxx..
The Speed Depends On Your Gear Ration. We Provide Three Different Teeth Pinion Gear To Make You More Choice In Gear Ration.
All Metal Internal Gears For Strength.Made Of Heavy Duty Hardened Steel, Long Time Life Span.
0.8 Metric Pitch; Compatible With 32-Pitch; Pinion Sinner Diameter: 5.0Mm/0.196Inch; Main Motor Gear Dia.: 45Mm/1.77Inch;Inner Diameter: 11.9Mm/0,47Inch..
Features
- 54T motor main gear comes with 15T/17T/19T pinions and 3.175mm coupler.Three pinions is 5mm, Using the coupler can convert Three pinion apertures to 3.175mm.so this product for motors with 5mm or 3.175mm shaft diameter.3660 3670 3674 4274 4268 550 540 3650 etc series motors.54T main gear replace 3956
- 0.8 metric pitch; compatible with 32-pitch; pinion sinner diameter: 5.0mm/0.196inch; main motor gear dia.: 45mm/1.77inch;inner diameter: 11.9mm/0,47inch.
- compatible with Traxxas Slash 4x4 4WD/2WD/VXL Rally/Stampede 4x4 VXL/1/10 Summit/1/10 E-REVO/T-Maxx/Jato/Rustler 4X4 VXL/Summit/T-Maxx.
- All metal internal gears for strength.Made of heavy duty hardened steel, long time life span
- The speed depends on your gear ration. We provide three different teeth pinion gear to make you more choice in gear ration
- See more on Amazon...
Brand: GLOBACT | Manufacturer: Globact
Weight: 0.13 pounds
See On Amazon #6
Hobbypark 11184 Steel Metal Spur Diff Differential Main Gear 64T & 11181 Motor Gear 21T RC Replacement Parts for Redcat Volcano EPX HSP 1/10 Monster Truck Brontosaurus 94111
Asin: B01CA3L77Y | Ean: 0756970379119 | UPC: 756970379119
1Xmotor Gear (21T) Diameter Of The Hole:3.175Mm.
Please Attention, Because Of The Motor Gear And This Spur Gear Are Metal, Suggest To Add Lubricating Oil, Not Only To Reduce The Friction Between The Metal Gear, But Also The Sound Will Be A Little Bit Small.
1 X Grub Head Screw (As Shown In The Picture).
1X Diff Main Gear (64T) Diameter Of The Hole:5Mm.
Features
- Check Size before buying. Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Trucks HSP etc.
- 1x Diff Main Gear (64T) Diameter of The Hole:5mm
- 1xMotor Gear (21T) Diameter of The Hole:3.175mm
- 1 x Grub Head Screw (As shown in the picture)
- please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small
- See more on Amazon...
Brand: Hobbypark | Manufacturer: DNhobby
Dimensions: 0.50 x 3.20 x 3.00 inches | Weight: 0.09 pounds
See On Amazon #7
ADORLY 2Pcs Hard Steel Super Main Gear 0.5module 60 Tooth for 1/18 Traxxas Latrax Rally LaTrax SST LaTrax Teton Upgrade Parts
Asin: B0CPLSKB2N
Material:Hard Steel, Super Durable Use, Better Heat Dissipation,This Meshes Perfectly With The Traxxas Pinion Gear And Only Makes A Little Bit Of Extra Noise Vs The Stock Plastic Gear. We Suggest You Use It In A Latrax Prerunner With A 10 Tooth Pinion..
Adjusting The Mesh Like This: Remove The Little Oval Metal Piece From The Motor Mount. Loosen Both Motor Screws And Roll A Folded Piece Of Paper Through The Spur And Pinion While Pushing The Gears Together. Then Tighten The Screws. I Also Tried A Single Layer Of Paper But It Was Too Tight And There Was A Lot Of Noise.
Lubricate With Lube Will Bring Better Performance,After Spraying A Little Grease On It, The Buzzing Will Go Away And It Ran Fine!.
This Item Works With: Traxxas Latrax Rally,Latrax Sst, Latrax Teton 60T Super Main Gear Upgrade Parts 1:18; 1/18 Pxtoys 9300 9303 Upgrade Losi Mini T 1.0.
Features
- Upgrade Parts Are Direct Replacements For Stock Components; Additional Parts Are Not Required
- This Item Works With: Traxxas Latrax Rally,Latrax Sst, Latrax Teton 60T Super Main Gear Upgrade Parts 1:18; 1/18 Pxtoys 9300 9303 Upgrade Losi Mini t 1.0
- Material:Hard Steel, Super Durable Use, Better Heat Dissipation,This Meshes Perfectly With The Traxxas Pinion Gear And Only Makes a Little Bit Of Extra Noise Vs The Stock Plastic Gear. We Suggest You Use It In a Latrax Prerunner With a 10 Tooth Pinion.
- Lubricate With Lube Will Bring Better Performance,After Spraying a Little Grease On It, The Buzzing Will Go Away And It Ran Fine!
- Adjusting The Mesh Like This: Remove The Little Oval Metal Piece From The Motor Mount. Loosen Both Motor Screws And Roll a Folded Piece Of Paper Through The Spur And Pinion While Pushing The Gears Together. Then Tighten The Screws. I Also Tried a Single Layer Of Paper But It Was Too Tight And There Was a Lot Of Noise
- See more on Amazon...
Brand: ADORLY | Manufacturer: ADORLY
See On Amazon #8
Upgrade Harden Steel 46T Main Spur Gear 1 Mod M1 for Traxxas X-MAXX XRT NEW MAXX XO-1 EREVO 2.0-1 pc
Asin: B07GM8KDVS | Ean: 8011447096008
For Traxxas 1/5 X-Maxx , 1/7 Xo-1, New Erevo 2.0,1/10 New Maxx, 1/6 Xrt.
Color : Black.
Features
- Material: Harden Steel
- Color : Black
- For Traxxas 1/5 X-Maxx , 1/7 XO-1, NEW EREVO 2.0,1/10 NEW MAXX, 1/6 XRT
- See more on Amazon...
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.66 pounds
See On Amazon #9
Raflot Hardened Steel 54T Spur Main Gear for 1/10 Traxxas Slash Traxxas Rustler Traxxas Stampede Platinum 4x4 VXL 2WD Jato Rally E-REVO Summit T-Maxx 3956(1PC)
Asin: B0CLGVRPSS
Made Of High-Quality Steel Material, Hard Anodic Oxidation And Anti-Rust Treatment On Gear Surface, Long Service Life For The Gear.
Easy And Convenient To Install And Remove, Easy For Carrying. Don't Need Complicated Installation Steps, Easily Installation Is Complete.
Cnc Machined For High Precision, Make The Gear Less Rough And Less Noise Than Other Pinions That Make Them Roll Smoothly.
54T Main Gear Replace #3956, 0.8 Metric Pitch, Suit For 32-Pitch Pinion Gear(Please Check The Model Of Your Rc Model Before Purchasing For The Proper Usage!).
Features
- The transmission gears compatible with 1/10 Traxxas Slash 2WD & 4x4/Stampede 2WD & 4 4/Rustler 2WD & 4 4/Hoss 2WD & 4 4/Bandit 2WD & 4 4
- 54T main gear replace #3956, 0.8 metric pitch, suit for 32-pitch pinion gear(Please check the model of your RC model before purchasing for the proper usage!)
- Made of high-quality steel material, hard anodic oxidation and anti-rust treatment on gear surface, long service life for the gear
- CNC machined for high precision, make the gear less rough and less noise than other pinions that make them roll smoothly
- Easy and convenient to install and remove, easy for carrying. Don't need complicated installation steps, easily installation is complete
- See more on Amazon...
Brand: Raflot | Manufacturer: Raflot
See On Amazon #10
Vanquish IRC00402 56t 32p Spur Gear
Asin: B07W81H7G7
Brand: Vanquish | Manufacturer: Vanquish
See On Amazon #11
ShareGoo Metal 48P Spur Pully Gear 92T Compatible with 3Racing Sakura D4 AWD/RWD 1/10 RC Drift Racing Car
Asin: B073X4BFX6 | Model: 92T | PartNumber: 92T | Ean: 0763846882123 | UPC: 763846882123
Suitable For Most 1:10 On-Road Belt Drive Car, Also Can Use On Some Shaft Drive Car..
Please Attention, Because Of The Motor Gear And This Spur Gear Are Metal, Suggest To Add Lubricating Oil, Not Only To Reduce The Friction Between The Metal Gear, But Also The Sound Will Be A Little Bit Small..
Top Quality Steel Materials & Superb Craftsmanship.
Outer Diameter: 50Mm ,Inner Diameter: 9.5Mm.
Features
- This is a metal 48P spur gear 92T, compatible with Sakura D4 AWD/RWD 1/10 rc car
- Outer diameter: 50mm ,Inner diameter: 9.5mm
- Suitable for most 1:10 on-road belt drive car, also can use on some shaft drive car.
- Top quality steel materials & superb craftsmanship
- Please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.
- See more on Amazon...
Brand: Share Goo | Manufacturer: Share Goo
Dimensions: 0.20 x 2.80 x 2.10 Inches | Weight: 0.02 pounds
See On Amazon #12
Harden Steel Main Spur Gear 52T for Traxxas 1/8 Sledge Monster Truck Replace 9652
Asin: B0BHCGZT2H | Model: 84147407264690 | PartNumber: 84147407264690 | Ean: 9331632686685
Replace 9587.
For Traxxas 1/8 Sledge Monster Truck.
Brand: Generic | Manufacturer: XingTian-RC
Warranty: NON
See On Amazon #13
ARRCat 57T 0.8Mod Slipper Gear with 3.175mm Pinions Gear 15T 16T 17T RC Gears Upgrades Part for 1/10 Arrma Granite Senton Big Rock Vorteks 3S Blx Mega550, Kraton Outcast 4S Blx, 1/8 Typhon 3S,Red
Asin: B0CNGR8V2H
ðãMore Durableã:The Upgrades Part Is Durable Enough,Improves The Overall Performance Of The Rc Car.Specially Designed Strengthening Cut-Outs For Increased Crash Resistance..
ðãArrcat GuaranteeãIf You Are Not 100% Completely Satisfied With Our Products, Please Do Not Hesitate To Contact Us To Request A Refund Or Exchange! Your Satisfaction Is Our Main Priority..
ðãEasy To Installã:Great For Replace The Old Or Broken Part.Increase Overall Performance And Durability Of Your Rc Car..
ð¥ãHigh Quality Materialã: Gear Made Of High-Quality Steel Material, Hard Anodic Oxidation And Anti-Rust Treatment On Gear Surface, Long Service Life For These Gears..
Features
- Fits For :for 1/10 Arrma Granite 3S Blx & Mega550, Senton 3S Blx & Mega550, Big Rock 3S Blx, Vorteks 3S Blx, Kraton 4S Blx, Outcast 4S Blx, 1/8 Typhon 3S,Replace ARA310948 ARA311034 ARA310949.
- High quality material : Gear Made of high-quality steel material, Hard anodic oxidation and anti-rust treatment on gear surface, long service life for these gears.
- More Durable :The upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance.
- Easy to Install :great for replace the old or broken part.Increase overall performance and durability of your RC car.
- ARRCat Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority.
- See more on Amazon...
Brand: ARRCat | Manufacturer: ARRCat
See On Amazon #14
RC Car Spur Gear, Metal 56T Spur Gear and 12T Motor Gear RC Replacement Spare Upgrade Parts Accessories for Axial SCX10 RC Car Model Axial Spur Gear 32P Axial Scx10 Ii Spur Gear
Asin: B08BYQ3WMC | Model: Tbest6yrk180axu | PartNumber: Tbest6yrk180axu | Ean: 8216763818703
âãQuality Materialã â Our Rc Car Spur Gear Is Made Of Plastic And Metal Material, Good Manufacturing Ensuring Maximum Durability..
âãGuaranteeã â If You Are Not Satisfied With Our Product Received, You Can Apply For Unconditional Return And Refund Within 180 Days. In Terms Of Any Problem Of This Product, You Can Send Emails To Us At Any Time. We Will Reply You As Soon..
âãPerfect Replacementã â Easy To Use, 56T Spur Gear, Wonderful Replacement For The Old Or Broken One.Come With Screw And Gasket, Easy And Convenient For Installation..
âãDurable And Exquisite Workmanshipã âExquisite Workmanship, Smoothly Surface, Safe And Convenient To Use..
Features
- HIGH PERFORMANCE High performance makes it accurate in size and stable in performance, and the surface is treated with exquisite appearance.
- DURABLE AND EXQUISITE WORKMANSHIP Exquisite workmanship, smoothly surface, safe and convenient to use.
- QUALITY MATERIAL Our RC car spur gear is made of plastic and metal material, good manufacturing ensuring maximum durability.
- PERFECT REPLACEMENT Easy to use, 56T spur gear, wonderful replacement for the old or broken one.Come with screw and gasket, easy and convenient for installation.
- GUARANTEE If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon.
- See more on Amazon...
Brand: T best | Manufacturer: T best
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #15
Harden Steel 54T Main Spur Gear 1 Mod M1-1 pc for Traxxas 1/5 XMAXX 1/10 New E-Revo2.0 MAXX 1/7 XO-1 6449
Asin: B071Z7ZZMX | Ean: 6357170936849
Material:Harden Steel.
What You See In The Main Picture Is What You Will Receive..
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Original Number:6449
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- Material:Harden Steel
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #16
Vanquish Products 52t Spur Gear VPSIRC00403 Electric Car/Truck Option Parts
Asin: B093DQSYV7 | Ean: 0791512780978 | UPC: 791512780978
Brand: Incision | Manufacturer: Incision
See On Amazon #17
2pcs Harden Steel 50T Main Spur Gear 1 Mod M1 for 1/5 Traxxas X-Maxx 1/7 Traxxas XO-1 1/10 Traxxas New E-Revo 2.0 MAXX 6448 Upgrade Parts Black
Asin: B0C3B82WN5
Harden Steel More Durable And Cool,Makes My Car Go 10 Mph Faster,Holding Up Well.
Package Include: 2Pcs Harden Steel 50T Main Spur Gear.
Will Fit 1/5 Traxxas X-Maxx 6S 8S 1/7 Traxxas Xo-1 1/10 Traxxas E-Revo 2.0 Maxx Super Gear 50T Upgrade Parts.
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Replacement Of Original Number:6448
- Please Check The Original Nubmer To Determin If It Fit Your Car Or Not.
- Harden Steel More Durable And Cool,Makes My Car Go 10 Mph Faster,Holding Up Well
- Will Fit 1/5 Traxxas X-Maxx 6s 8s 1/7 Traxxas Xo-1 1/10 Traxxas E-Revo 2.0 Maxx Super Gear 50T Upgrade Parts
- Package Include: 2pcs Harden Steel 50T Main Spur Gear
- See more on Amazon...
Brand: ADORLY | Manufacturer: ADORLY
See On Amazon #18
RCMYou Metal Spur Gear Slipper Clutch 57T&Center Slider Driveshaft&15T/16T/17T Pinions Gear Upgrades Part for Arrma 1/10 Granite/Senton/Big Rock/Vorteks 3s,Kraton/Outcast 4S,1/8 Typhon 3S,Red
Asin: B0CSPCFX2Z
ðãLong-Lasting Performanceã: The Upgrades Part Is Durable Enough,Improves The Overall Performance Of The Rc Car.Specially Designed Strengthening Cut-Outs For Increased Crash Resistance..
ðãRcmyou GuaranteeãIf You Are Not 100% Completely Satisfied With Our Products, Please Do Not Hesitate To Contact Us To Request A Refund Or Exchange! Your Satisfaction Is Our Main Priority..
ð¥ãEasy To Installã:Easy To Install, Great For Replace The Old Or Broken Part.Increase Overall Performance And Durability Of Your Rc Car..
ð¥ãUpgrade To Greater Strengthã: Slipper Clutch Made Of High-Quality Steel Material, Hard Anodic Oxidation And Anti-Rust Treatment On Gear Surface, Long Service Life For These Gears..
Features
- Fits For :for Arrma 1/10 Granite 3s mega550/Senton 3s mega550/Big rock 3s mega550/Vorteks 3s mega550,Kraton 4S/Outcast 4S,1/8 Typhon 3S.
- Upgrade to Greater Strength : Slipper Clutch Made of high-quality steel material, Hard anodic oxidation and anti-rust treatment on gear surface, long service life for these gears.
- Long-lasting Performance : The upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance.
- Easy to Install :Easy to install, great for replace the old or broken part.Increase overall performance and durability of your RC car.
- RCMYou Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority.
- See more on Amazon...
Brand: RCMYou | Manufacturer: RCMYou
See On Amazon #19
Raidenracing Harden Steel 47T Spur Main Gear for HPI 1/8 Savage 4.6 X 21 25 SS Replace 76937
Asin: B07F2X9QQM | Model: 0628U7QUELB | PartNumber: 0628U7QUELB | Ean: 8011447095230
Replace 76937.
For Hpi 1/8 Savage 4.6 X 21 25 Ss.
Brand: Raidenracing | Manufacturer: Raidenracing
Weight: 0.09 pounds
See On Amazon 
Looking For Something Else?
Search