2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07F946Z1V | Model: 157094-45-10 | PartNumber: 157094-45-10
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-23993 Or Stabilus #14269. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Medium Height And Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 60-80 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 Inches
See On Amazon Similar To 2 Truck Upfitters 16 Gas
#1
C16-15208 15.7 inch 45Lbs/200N Gas Shocks Struts for are Leer Camper Topper Shell Rear Window, Truck Canopy Cap Cover, Pack of 2PCS.
Asin: B0869MZH3T | Ean: 0724500131469, 0603728610973 | UPC: 603728610973, 724500131469
💠[Tips] Tips For Gas Spring Used On Custom Applications. If Your Lid Or Door Weighs 20-40Lb, Just Install One. The Lid Or Door Weighs 50-85Lb, Install Both. If You Are Not Sure, Please Contact Us Before Buying, We Will Provide You With Professional Advice..
💠[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
💠[Interchage Number] 025311 14269Are 5003024510 5159Ex 5159Ex 5159Ex 5159Ex C1615208 C16-15208 Se150p45m10.
💠[Parameter] Compressed Length (Center-To-Center): 9.4In (239Mm). Extended Length (Center-To-Center): 15.7In (399Mm). Force: 45 Lbs/200N Per Strut. Please Measure The Length Of Your Original Shocks Before Purchasing..
Features
- [Most used for] 16" 45lb gas shock struts fit for Leer ARE camper shell topper rear window bed Cover, other custom applications such as cabinet door, outdoor bench lid, toolbox, boat lid, tarp door and so on.
- [Parameter] Compressed Length (Center-to-Center): 9.4in (239mm). Extended Length (Center-to-Center): 15.7in (399mm). Force: 45 Lbs/200N per Strut. Please measure the length of your original shocks before purchasing.
- [Tips] Tips for gas spring used on custom applications. If your lid or door weighs 20-40lb, just install ONE. The lid or door weighs 50-85lb, install both. If you are not sure, please contact us before buying, we will provide you with professional advice.
- [Interchage Number] 025311 14269ARE 5003024510 5159EX 5159EX 5159EX 5159EX C1615208 C16-15208 SE150P45M10
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #2
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches | Weight: 0.75 pounds
See On Amazon #3
C1606389 14 Inches Truck Camper Shell Struts, 107N/24Lbs Gas Spring Shocks Lift Supports for Truck Topper Rear Window (2 Pack)
Asin: B07ZGCP6JY | Model: C16-06389 | PartNumber: C16-06389 | Ean: 0705338272562 | UPC: 705338272562
【Fit】The 14 Inch Gas Struts Connector Is 10Mm Nylon Socket Type. End Fitting 10Mm Ball Stud..
【C16-06389 Struts Package Content】Package Contains 14 Inch Gas Struts*2. Installation With A Flat Screwdriver, No Special Tools Required..
【Buy Confidence】--.For Any Reason You're Not Completely Satisfied,Can Ask For A Replacement Or Refund Wthin 3 Months..
【Characteristic】--.C16 - 06389 Gas Spring ;Force: 24 Pounds Of Pressure.
Features
- Product Dimensions -- .Extended Length:14 inch[355mm] , Stroke 5.08 inch [ 129 mm ] Perfect fits for rear lift doors of truck camper cover
- Characteristic --.C16 - 06389 Gas Spring ;Force: 24 pounds of pressure
- Fit The 14 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud.
- Buy Confidence --.For any reason you're not completely satisfied,can ask for a replacement or refund wthin 3 months.
- C16-06389 Struts Package Content Package contains 14 inch gas struts*2. Installation with a flat screwdriver, no special tools required.
- See more on Amazon...
Brand: Ketofa | Manufacturer: Ketofa
Dimensions: 0.98 x 14.96 x 0.98 inches
See On Amazon #4
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B074MF3HMP | Model: 17”, 45 lbs | PartNumber: 17”, 45 lbs | Ean: 0709832096785 | UPC: 709832096785
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 60-80 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 1.00 x 18.00 x 2.00 Inches | Weight: 0.81 pounds
See On Amazon #5
2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
Asin: B07PRZKWY8 | Model: 16”, 55 lbs | PartNumber: 16”, 55 lbs
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible With Suspa # C16-23994 & Compatible With Stabilus # 025657 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 55 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium/Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 55 Lbs Of Pressure, For A Total Of 110 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 110 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 70-90 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.70 x 15.70 x 0.70 Inches | Weight: 1.00 pounds
See On Amazon #6
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 28 lbs of Press ea) Compatible with are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07L43M829 | Model: 16”, 28 lbs | PartNumber: 16”, 28 lbs
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09841 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 28 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Short & Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 28 Lbs Of Pressure, For A Total Of 56 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 56 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 28 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for short & light weight rear or side camper shell doors. Each canopy shock has 28 lbs of pressure, for a total of 56 lbs of pressure. Please note that this does not mean that it can lift something that is 56 lbs. the typical hinged-style door weight for this prop is approximately 30-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09841 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon #7
2 Truck Upfitters 10" Gas Props (10" ext, 6.7" Compressed, 45 lbs of Press ea) Compatible w/Std Aluminum UWS DeeZee etc Toolboxes & Camper Shell Side Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07PNKLZPP | Model: 100067-45-10 | PartNumber: 100067-45-10
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.59 x 10.00 x 0.59 Inches
See On Amazon #8
2 Truck Upfitters 10" Gas Props (10" ext, 6.7" Compressed, 40 lbs of Press ea) Compatible w/Std Aluminum UWS DeeZee etc Toolboxes & Camper Shell Side Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07PPQ8J49 | Model: 100067-40-10 | PartNumber: 100067-40-10
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.59 x 10.00 x 0.59 Inches
See On Amazon #9
Euplokeer C16-23994 025657 16in 55lb/245N Gas Shock Strut Lift Support for Leer are Camper Shell Window, Snugtop Truck Pickup Topper Door Cap Canopy Tool Box Lid, Pack of 2PCS
Asin: B0CLSD3MY3
【Product Basic Information】This Listing Includes 2 Gas Shock For Multi Purpose. Extended Length 15.7In. Compressed Length 9.4In. This Gas Strut For Camper Shell Is Ez To Install. Only A Flat Head Screwdriver Is Required..
【Care From The Euplokeer Brand】24 Hour Email Response And 15 Month Product Exchange Service. Euploker Is Much More Than That. Please Feel Free To Contact Us At Any Time With Any Questions..
【How To Choose】Get The Pound Rating Or Oem Interchange Number On Your Old Cylinder, Then Measure The Extended Length Of Your Old Lift Support. Compare The Pound Force, Oe Number, And Measurement To The Our 16In Gas Strut..
【Compatibility】Leer Topper Replacement Struts Compatible With Interchange Numbers Suspa # C16-23994, Stabilus # 025657. We Recommend Confirming Compatibility By Comparing The Cylinder Part Numbers Of The Original Gas Springs Before Purchase..
Features
- Applicable Scenario 16in gas strut lift support work for LEER ARE Snugtop truck camper shell, topper rear window, truck cap canopy, pickup truck toolbox. Euplokeer 16in gas shock is not compatible with all brands of camper shells on the market, please refer to the model specifications to purchase.
- Compatibility Leer topper replacement struts compatible with interchange numbers Suspa # c16-23994, Stabilus # 025657. We recommend confirming compatibility by comparing the cylinder part numbers of the original gas springs before purchase.
- Product Basic Information This listing includes 2 gas shock for Multi Purpose. Extended Length 15.7IN. Compressed Length 9.4IN. This gas strut for camper shell is EZ to install. Only a flat head screwdriver is required.
- How to choose Get the pound rating or OEM interchange number on your old cylinder, then measure the extended length of your old lift support. Compare the pound force, OE number, and measurement to the our 16in gas strut.
- Care from the Euplokeer brand 24 hour email response and 15 month product exchange service. Euploker is much more than that. Please feel free to contact us at any time with any questions.
- See more on Amazon...
Brand: Euplokeer | Manufacturer: Euplokeer
See On Amazon #10
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 70 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1SN1VV | Model: 171099-70-10 | PartNumber: 171099-70-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 70 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall, Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 70 Lbs Of Pressure, For A Total Of 140 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 140 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 70-100 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 70 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall, heavy weight rear or side camper shell doors. Each canopy shock has 70 lbs of pressure, for a total of 140 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 140 lbs. the typical hinged-style door weight for this prop is approx 70-100 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.75 x 17.50 x 0.75 inches
See On Amazon #11
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 28 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1H6WGF | Model: 171099-28-10 | PartNumber: 171099-28-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 28 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Shock Absorber Is For Tall Height & Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 28 Lbs Of Pressure, For A Total Of 56 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 56 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 30-45 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 28 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of shock absorber is for tall height & light weight rear or side camper shell doors. Each canopy shock has 28 lbs of pressure, for a total of 56 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 56 lbs. the typical hinged-style door weight for this prop is approx 30-45 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
See On Amazon #12
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 85 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1PPJ3X | Model: 171099-85-10 | PartNumber: 171099-85-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 85 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 85 Lbs Of Pressure, For A Total Of 170 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 170 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 80-120 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 85 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall heavy weight rear or side camper shell doors. Each canopy shock has 85 lbs of pressure, for a total of 170 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 170 lbs. the typical hinged-style door weight for this prop is approx 80-120 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.75 x 17.50 x 0.75 Inches
See On Amazon
Looking For Something Else?
Search