uxcell 2pcs Shaft Coupling 8mm to 8mm Bore L35xD25 Flexible Coupler Joint for Servo Stepped Motor
Asin: B07G6PRGY4 | Model: a18060800ux0151 | PartNumber: a18060800ux0151
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Main Color: Silver Tone; Shaft Usage: 8Mm To 8Mm/0.31 Inch To 0.31 Inchtotal Size: 35 X 25Mm / 1.38 Inch X 0.98 Inch (L*D); Feature: Set Screwsthread Size: M3.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Main Color: Silver Tone; Shaft Usage: 8mm to 8mm/0.31 inch to 0.31 inchTotal Size: 35 x 25mm / 1.38 inch x 0.98 inch (L*D); Feature: Set screwsThread Size: M3
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 2pcs Shaft Coupling 8mm
#1
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #2
uxcell 8mm x 200mm 304 Stainless Steel Solid Round Rod for DIY Craft - 2pcs
Asin: B082ZMGJ9B | Model: a19102800ux0134 | PartNumber: a19102800ux0134
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 8Mm/5/16 Inch; Length: 200Mm/7.87 Inch..
Features
- [ Product Contents ] - 2pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 8mm/5/16 inch; Length: 200mm/7.87 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell M8 x 1.25-Pitch 60mm Length Coupling Nuts, 2pcs 304 Stainless Steel Metric Hex Rod Coupling Nuts
Asin: B0C9HR95SF
[Standard Design] - The Coupling Nut Has Internal Threads And A Hexagonal Rod To Ensure Good Angular Accuracy On The Tool..
[Easy To Install] - The Coupling Nut Does Not Require Any Tools, Because It Is Used To Assemble And Attach Two Parts, Such As Screws, Pins, Or Machine Screws. Check The Dimensions Before Ordering To Avoid Installation Errors..
[Scope Of Application] - The Coupling Nut Is Widely Used In Industry, Furniture Decoration, And Other Industries, Such As Household And Office Equipment, Electronic Equipment, And Communications Equipment, Making Them Popular In Various Industries..
[Durable Material] - The Hex Rod Coupling Nut Is Made Of 304 Stainless Steel, Which Has Good Rust And Corrosion Resistance, Oxidation Resistance, Heat Resistance And High Toughness, Suitable For Indoor And Outdoor Applications..
Features
- [Basic Size] - Thread Size: M8x1.25mm (Dia. x Pitch); Hex Width: 13mm / 0.51"; Total Length: 60mm / 0.36"; Package Content: 2pcs x Hex Coupling Nuts
- [Durable Material] - The hex rod coupling nut is made of 304 stainless steel, which has good rust and corrosion resistance, oxidation resistance, heat resistance and high toughness, suitable for indoor and outdoor applications.
- [Standard Design] - The coupling nut has internal threads and a hexagonal rod to ensure good angular accuracy on the tool.
- [Scope of Application] - The coupling nut is widely used in industry, furniture decoration, and other industries, such as household and office equipment, electronic equipment, and communications equipment, making them popular in various industries.
- [Easy to Install] - The coupling nut does not require any tools, because it is used to assemble and attach two parts, such as screws, pins, or machine screws. Check the dimensions before ordering to avoid installation errors.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Hex Coupler 8mm Bore Motor Hex Brass Shaft Coupling Flexible Connector for Car Wheels Tires Shaft Motor 8pcs
Asin: B08M45D6F2
【Material:】- Made Of Brass, Sturdy, Reliable And Strictly Functional. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
【Package Content】- 8Pcs Hex Coupler, 16Pcs M4 Screws, 2Pcs 4Mm Hex Wrench..
【Function】- A Special Coupler, Used For Connecting The Motor Shaft And The Hexagon Wheel Of The Robot And Other Models..
【Coupling Size】- Hex Height : 6Mm ; Opposite Side: 12Mm ; Cylinder Height: 12Mm ; Cylinder Outer Diameter: 11.5Mm ; Cylinder Inner Diameter: 8Mm ; Fastening Screw Hole: M4.
Features
- Type - 8mm Hex Brass Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Coupling Size - Hex Height : 6mm ; Opposite Side: 12mm ; Cylinder Height: 12mm ; Cylinder Outer Diameter: 11.5mm ; Cylinder Inner Diameter: 8mm ; Fastening Screw Hole: M4
- Material: - Made of brass, sturdy, reliable and strictly functional. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function - A special coupler, used for connecting the motor shaft and the hexagon wheel of the robot and other models.
- Package Content - 8pcs Hex Coupler, 16pcs M4 Screws, 2pcs 4mm Hex Wrench.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler
Asin: B078VR9V7J | Model: a17110100ux0191 | PartNumber: a17110100ux0191
Accommodates Angular, Parallel Misalignment.
Shaft Couplers Suitable For Connect Servo Motor, Stepper Motor, Encoder, Screw Driving, Machine Platform, Etc..
Aluminum Hubs For Light Weight, Stainless Steel Discs For Strength.
Clamp-Style Mount For Secure Attachment To Shaft.
Features
- 32mm Diameter X 42mm Length; 10000RPM rotational speed
- Clamp-style mount for secure attachment to shaft
- Accommodates angular, parallel misalignment
- Aluminum hubs for light weight, stainless steel discs for strength
- Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 2pcs 10mm to 10mm Inner Dia Rotatable Universal Steering Shaft U Joint Coupler L35XD16
Asin: B07GN1SXDQ | Model: a18060700ux0078 | PartNumber: a18060700ux0078
Main Color: Silver Tone; Total Size: 35 X 16Mm / 1.38 Inch X 0.63 Inch (L*D).
Thread Size: M4.
Feature: Set Screws; Connection Diameter: 10Mm To 10Mm/0.39 Inch To 0.39 Inch.
Net Weight: 60G; Package Content: 2 X Universal Joint.
Features
- Country of Manufacture: CHINA; Material: nickel-coated iron
- Net Weight: 60g; Package Content: 2 x Universal Joint
- Main Color: Silver Tone; Total Size: 35 x 16mm / 1.38 inch x 0.63 inch (L*D)
- Feature: Set screws; Connection Diameter: 10mm to 10mm/0.39 inch to 0.39 inch
- Thread Size: M4
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 Inches
See On Amazon #7
uxcell 8mm to 8mm Shaft Coupling 40mm Length 25mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9GMM2N | Model: SYNCE007174 | PartNumber: SYNCE007174
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 40X25mm/ 1.57X0.98Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch
- Material: Aluminum alloy; Size: 40x25mm/ 1.57x0.98inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 4mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,2pcs
Asin: B091376XGT | Model: a20112600ux0027 | PartNumber: a20112600ux0027
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 4mm to 8mm; Total Length: 25mm /0.98 inch; Outside Diameter : 19mm/ 0.75 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 1/8 Inch to 1/8 Inch Bore Rigid Coupling Set Screw L20XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Light Blue
Asin: B08HCM9CQB | Model: a20011400ux0851 | PartNumber: a20011400ux0851
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/8 inch to 1/8 inch; Total Length: 20mm /0.79 inch, Outside Diameter : 10mm/ 0.39 inch; with M3 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 8mm to 12mm Shaft Coupling 30mm Length 25mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder
Asin: B06X99YZ34 | Model: a16121900ux0378 | PartNumber: a16121900ux0378
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 30X25mm/ 1.18X0.98Inch( L*D).
Features
- Shaft Usage: 8mm to 12mm / 0.31 to 0.47 inch
- Material: Aluminum alloy; Size: 30x25mm/ 1.18x0.98inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.54 x 1.97 inches
See On Amazon #11
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B07P6X92BT
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #12
uxcell 8mm to 12mm Shaft Coupling 45mm Length 32mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9QNCKM | Model: SYNCE007175 | PartNumber: SYNCE007175 | Ean: 0604267458446 | UPC: 604267458446
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 45X32mm/ 1.77X1.26Inch( L*D).
Features
- Shaft Usage: 8mm to 12mm / 0.31 to 0.47 inch
- Material: Aluminum alloy; Size: 45x32mm/ 1.77x1.26inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Asin: B07PFWRC1J | Model: a18121800ux0642 | PartNumber: a18121800ux0642
Material: Aluminum Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 8Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #14
uxcell 1/4 Inch to 8mm Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B08GY6W31B
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 8mm; Total Length: 25mm/0.98 inch, Outside Diameter:18mm/0.7 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 8mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor
Asin: B08NJ1NK85 | Model: a20101400ux0071 | PartNumber: a20101400ux0071
Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Color: Silver Tone; Material: Aluminum Alloy; Fixed Type: Clamp; Thread Size: M3; Connection Diameter: 8Mm To 12Mm; Total Length: 31Mm/1.22 Inch; Outside Diameter : 25Mm/ 0.98 Inch; ; Package List:; 1X Flexible Shaft Coupler.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Color: Silver Tone; Material: Aluminum Alloy; Fixed Type: Clamp; Thread Size: M3; Connection Diameter: 8mm to 12mm; Total Length: 31mm/1.22 inch; Outside Diameter : 25mm/ 0.98 inch; ; Package List:; 1x Flexible Shaft Coupler
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 2pcs 8mm to 8mm Shaft Coupling 25mmx20mm Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B09BZ9VNPC | Model: a21031800ux0391 | PartNumber: a21031800ux0391
Feature: Screw Type(Coiling Clamping);.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Which Simplifies The Debugging Difficulty..
Main Color: Silver.
Material: Aluminum Alloy; Size: 25X20mm/ 0.98X0.79Inch( L*D).
Features
- Shaft Usage: 8mm to 8mm / 0.31inch to 0.31inch
- Material: Aluminum alloy; Size: 25x20mm/ 0.98x0.79inch( L*D)
- Feature: Screw Type(Coiling Clamping);
- Main Color: Silver
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, which simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 7mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs
Asin: B091373GQD | Model: a20112600ux0083 | PartNumber: a20112600ux0083
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 7mm to 8mm; Total Length: 25mm /0.98 inch; Outside Diameter : 19mm/ 0.75 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Hex Coupler 8mm Bore Motor Hex Brass Shaft Coupling Flexible Connector for Car Wheels Tires Shaft Motor 2pcs
Asin: B08M31RZ1S
【Material:】- Made Of Brass, Sturdy, Reliable And Strictly Functional. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
【Package Content】- 2Pcs Hex Coupler, 4Pcs M4 Screws, 1Pcs 4Mm Hex Wrench..
【Function】- A Special Coupler, Used For Connecting The Motor Shaft And The Hexagon Wheel Of The Robot And Other Models..
【Coupling Size】- Hex Height : 6Mm ; Opposite Side: 12Mm ; Cylinder Height: 12Mm ; Cylinder Outer Diameter: 11.5Mm ; Cylinder Inner Diameter: 8Mm ; Fastening Screw Hole: M4.
Features
- Type - 8mm Hex Brass Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Coupling Size - Hex Height : 6mm ; Opposite Side: 12mm ; Cylinder Height: 12mm ; Cylinder Outer Diameter: 11.5mm ; Cylinder Inner Diameter: 8mm ; Fastening Screw Hole: M4
- Material: - Made of brass, sturdy, reliable and strictly functional. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function - A special coupler, used for connecting the motor shaft and the hexagon wheel of the robot and other models.
- Package Content - 2pcs Hex Coupler, 4pcs M4 Screws, 1pcs 4mm Hex Wrench.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 2PCS Motor Shaft 5mm to 8mm Helical Beam Coupler Coupling 25mm Dia 30mm Length
Asin: B09DG8XGDK | Model: a21042700ux0360 | PartNumber: a21042700ux0360
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 2 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Color: Silver Tone; Material: Aluminum Alloy; Connection Diameter: 5Mm To 8Mm; Screw Angle: 90 Degree;Total Length: 30Mm /1.18 Inch;Outside Diameter : 25Mm /0.98 Inch.
Features
- Zero backlash. Two-piece metallic spring coupling. For little torque shaft connect.
- Color: Silver Tone; Material: Aluminum Alloy; Connection Diameter: 5mm to 8mm; Screw Angle: 90 degree;Total Length: 30mm /1.18 inch;Outside Diameter : 25mm /0.98 inch
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 2 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 7mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs
Asin: B08H81DSZH
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 7mm to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search