Huanyang 80mm Spindle Motor Clamp Mount Bracket Diameter 80mm with 4PCS Screws for Milling Spindle
Asin: B07G77671N | Ean: 0724509859623 | UPC: 724509859623
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Adopt High Quality Aluminum Material,Sturdy And Has A Long Service Life.
The Accuracy Is Much Higher , And It Is Hard To Deform.
The Surface Is Oxidized Polished, Very Smooth,Safe To Use..
Features
- Suit for: 80mm Diameter High-speed Spindle Motor.
- The surface is oxidized polished, very smooth,safe to use.
- Adopt high quality aluminum material,sturdy and has a long service life
- the accuracy is much higher , and it is hard to deform
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
See On Amazon Similar To Huanyang 80mm Spindle Motor Clamp
#1
RATTMMOTOR 80mm CNC Spindle Motor Clamp Mount Bracket Support Cast Aluminium with 3pcs Screws for 80mm 1.5KW 2.2KW CNC Router Engraver Milling Water Cooled Air Cooled Spindle Motor
Asin: B078HB21VG | Model: 80CP | PartNumber: 80CP | Ean: 0654615632707 | UPC: 654615632707
Material: Aluminum,Surface Sandblasted..
Cast Aluminium Fixture Is Much Heavier Than Aluminium Profile Fixture..
Fit For : Cnc 80Mm Diameter High-Speed Spindle Motor..
1.5Kw 2.2Kw Spindle Motor Mount Bracket Clamp..
Features
- Compared with the aluminium profile fixture,the accuracy is much higher, and it is hard to deform.
- 1.5kw 2.2kw Spindle motor mount bracket clamp.
- Material: Aluminum,Surface sandblasted.
- Fit for : CNC 80mm diameter high-speed spindle motor.
- Cast aluminium fixture is much heavier than aluminium profile fixture.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM-80CP
Dimensions: 31.50 x 58.27 x 30.71 Inches
See On Amazon #2
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 Inches | Weight: 23.19 Pounds
See On Amazon #3
RATTMMOTOR Air Cooled CNC Spindle Motor 110V 2.2KW 80MM 3HP 24000RPM 15A 400HZ ER20 Spindle Milling Motor for CNC Router Engraving Machine
Asin: B0BTY7BYYP | Ean: 0754193412040 | UPC: 754193412040
✅【Rotation Accuracy】- The Rotor Has High Precision Because Of Precision Steel Ball Retainer, And High Temperature Resistant Grease Lubrication Method, All Of Which Ensures The Rotation Accuracy And Low Noise Of The Spindle During High-Speed Grinding..
✅【Main Application 】This Spindle Motor Is Mainly Designed For Cnc Router Machine And Usually Used With Vfd Inverter, Engraving Materials Such As Wood, Aluminum, Glass, Pvc Industry ,Ect..
✅【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
✅【Material & Configure】- The Spindle Has Fine Workmanship, 3 Bearings, Stainless Steel Body And Dustproof Design Make The Spindle More Durable..
✅【Cooling Method】- Good Heat Dissipation Effect By Adopting Fan Cooling Method, Without Connecting To Water Pump And Water Pipe, It's More Convenient And Trouble-Saving And Can Be Used Directly By Connecting With The Inverter..
Features
- Basic Parameters - Diameter: 80 mm x Length: 195 mm, Power: 2.2KW, Voltage: 110VAC, Current: 15A, Frequency: 0-400Hz, Collet Size: ER20, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
- Cooling Method - Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
- Rotation Accuracy - The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
- Material & Configure - The spindle has fine workmanship, 3 bearings, stainless steel body and dustproof design make the spindle more durable.
- Main Application This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: ChangSheng
See On Amazon #4
Genmitsu 65mm Diameter Aluminum CNC Spindle Holder Spindle Mount for PROVerXL 4030 CNC Machine Aluminum Z Axis Assembly Kits
Asin: B0CY1SJ2KW | Model: 4030V2-ZC69 | PartNumber: 4030V2-ZC69 | Ean: 0816550029305 | UPC: 816550029305
Stable And Reliable Performance: The Spindle Mount Is Engineered To Securely Hold The Spindle, Enhancing Stability And Minimizing Noise During Operation..
Dimension: Outside Dimension: 110 X 99X 35Mm; Diameter: 65Mm.
Easy Installation: Effortlessly Bring More Options For Your Machine By Simply Loosening The Four Screws Of The Stock Spindle, Replacing It With This New Spindle Holder, And Then Tightening The Screws..
High Quality: Crafted With Precision From High-Quality Aluminum, Delivering Exceptional Rigidity And Durability..
Features
- Compatibility: Specifically designed for the Genmitsu PROVerXL 4030. Upgrade your PROVerXL 4030 with ease by using this 65mm spindle mount, allowing you to install a more powerful trimmer.
- High Quality: Crafted with precision from high-quality aluminum, delivering exceptional rigidity and durability.
- Stable and Reliable Performance: The spindle mount is engineered to securely hold the spindle, enhancing stability and minimizing noise during operation.
- Easy Installation: Effortlessly bring more options for your machine by simply loosening the four screws of the stock spindle, replacing it with this new spindle holder, and then tightening the screws.
- Dimension: Outside Dimension: 110 x 99x 35mm; Diameter: 65mm
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 1.40 x 4.30 x 3.50 Inches
See On Amazon #5
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 Pounds
See On Amazon #6
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 Inches | Weight: 3.68 Pounds
See On Amazon #7
CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
Asin: B0BDRNTWJZ | Model: ytx-1.5kw-65-air | PartNumber: ytx-1.5kw-65-air
【Easy And Fast To Assemble 】-We Offer Pre-Soldered Aviation Wire , You Will Take 2 Minutes To Connect Spindle Motor With Vfd..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Engraving And Drilling Material :Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Spindle Advantage 】-It Made Less Noise When Working, Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Average Spindle Motor..
Features
- BASIC INFORMATION -This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm ),Diameter 65mm Voltage: 110V ,Power:1.5KW, Frequency: 400 Hz, Current: 8A , Speed: 5000-24000 RPM, Runout off: less than 0.005 mm. Weight: 2.7kg(5.96lbs)
- SPINDLE ADVANTAGE -It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
- EASY AND FAST TO ASSEMBLE -We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
- WIDE APPLICATION -Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #8
110V 2.2kw CNC vfd Spindle Package, 110V 2.2KW VFD+110V 2.2KW 80mm ER20 Water Cooled Spindle Motor+110V Water Pump+80mm Clamp +5m Water Pipe
Asin: B0BMV6GYLD | Model: 110v 2.2kw kit | PartNumber: 110v 2.2kw kit
【Package Include】1 X 110V-2.2Kw Vfd, 1 X2.2Kw Φ80mm 24000Rpm Er20 Spindle.1 X 110V-75W Water Pump ,1 X 80Mm Motor Clamp,1 X 5M Horse.
【Warranty】One Year Warranty (The Spindle Is Half A Year).If There Is An Alarm In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Wide Range Of Applications】The Spindle Motor Applied To: Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine, Small Sized Processing Center, High Speed Centrifuge Etc..
【Parameter Settings】All Basic Parameterhave Been Set Up, The Customer Can Directly Connect And Start When Receiving The Product.
Features
- Connection way The package only supports 110VAC(+/-5%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor pin1=U,pin2=V,pin3=W,pin4=ground
- Parameter Settings All basic parameterhave been set up, the customer can directly connect and start when receiving the product
- Package Include 1 x 110V-2.2KW VFD, 1 x2.2KW 80mm 24000RPM ER20 Spindle.1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m horse
- Wide range of applications The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
- Warranty one year warranty (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Warranty: 1 year warranty for inverter,(artificial damage is not included)
See On Amazon #9
RATTMMOTOR CNC Spindle Motor Kit 220V, 2.2KW Air Cooled Spindle Motor Square Spindle Motor ER20+2.2KW VFD Inverter 220V Variable Frequency Drive Single to 3 Phase Converter for CNC Router Machine
Asin: B09NVW8ZN6 | Model: CFFK-2.2RTM | PartNumber: CFFK-2.2RTM
【2.2Kw Vfd】①Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220Vac, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase, Current: 11A. It Provide A Variety Of Fault Protection Functions: Over-Current, Over-Voltage, Under-Voltage, Over-Heat, Overload, Lack Of Equal Real-Time Monitoring And Protection To Ensure Safe Operation..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number U, V, W. Number U, V, W Port Are Connected With Inverter's Port U, V, W Respectively..
②Other Fuctions: With Over Torque And Under Torque Detection; With Jump Frequency Control Function, It Can Effectively Suppress Mechanical Resonance And Make The System More Stable And Reliable.It Can Also Avoid The Impact Of Production Due To Instantaneous Power Failure Because Of Instantaneous Power-Down Retention Function. What's More, It Supports Multiple Frequency Settings: Digital Setting, Analog Setting, Pid Setting, Rs485 Communication Setting,Ect..
【2.2Kw Spindle Motor】: ①This Is A 220V-2.2Kw Air-Cooled 6A Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, Precision Tapered Bore Is Less Than 0.005Mm And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Main Shaft Cannot Only Rotate Clockwise Or Counter-Clockwise..
Features
- Package Include : 1 x 2.2KW Square Air Cooled Spindle Motor 1 x 2.2KW VFD with cable 1 x ER20 Wrench
- 2.2KW Spindle Motor : This is a 220V-2.2KW air-cooled 6A spindle motor come with a ER20 nut and collet. Frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter-clockwise.
- 2.2KW VFD Parameters: Input Voltage: 220V(+/-15%), Output Voltage: 220VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase, Current: 11A. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
- Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number U, V, W. Number U, V, W port are connected with inverter's port U, V, W respectively.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 10.55 x 4.45 inches | Weight: 10.80 Pounds
Warranty: 1 year warranty
See On Amazon #10
RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router
Asin: B09X2Y63XQ | Model: 500WBLDC-4 | PartNumber: 500WBLDC-4
【Spindle Motor Drvier Parameters】Rated Voltage: 20-50Vdc; Rated Current: 10A; Limiting Current: 15A; Support Speed: Support Speed Above 20000Rpm, The Specific Speed Depends On The Motor Itself And The Load..
【Advantages-1】The Brush Is Removed, And There Is No Electric Spark Generated When The Brushed Motor Is Running, Which Greatly Reduces The Interference Of The Electric Spark To The Remote Control Radio Equipment..
【Dc Switching Power Supply Parameters】Input Voltage: 110V / 220V Ac; Current: 0-12.5A; Input Frequency: 50/60Hz; Power: 600W; Output Voltage: Dc 48V; Size; 215*115*50Mm..
【Spindle Motor Drvier Features】Compatible With Square Wave With And Without Hall, With Potentiometer Speed Regulation Function, External 10V Voltage Speed Regulation Function, Switch Function, Speed Output Function, Alarm Output Function, Forward And Reverse Function, Etc., And Has A Protective Shell..
Features
- Air Cooled Spindle Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque 0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
- Spindle Motor Drvier Features Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
- Spindle Motor Drvier Parameters Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
- DC Switching Power Supply Parameters Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
- Advantages-1 The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 22.83 x 74.80 x 22.44 Inches | Weight: 5.95 pounds
See On Amazon #11
CNC Spindle Motor Kits, 110V 1.5KW Air Cooled Spindle CNC Spindle +110V 1.5KW VFD+ 65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine
Asin: B0BF5R3LNC | Model: ytx-1.5kw air kit | PartNumber: ytx-1.5kw air kit
【Spindle Advantage 】- Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem..
【Wide Application】-Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Easy And Fast To Assemble 】-The Vfd Had Been Pre-Programmed For Basic Parameters , You Don't Need To Make Extra Setting Up.We Offer Fully Complete Accessories Including Pre-Soldered Aviation Wire And Power Wire, It Will Take Just 5 Minutes To Install All And Make All Functions Running..
Features
- PACKAGE LIST -1x110V 1.5KW 65mm air Cooled Spindle Motor +1x110V 1.5KW VFD+ 1x 65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
- EASY AND FAST TO ASSEMBLE -The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
- SPINDLE ADVANTAGE - Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- WIDE APPLICATION -Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #12
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 Inches
See On Amazon #13
RATTMMOTOR CNC 500W Spindle Motor ER11 500 Watt Air Cooled Spindle Motor 52mm DC 48V 12000RPM 600mN.m for DIY Mini CNC Router Engraver Milling Machine
Asin: B08H1RRCF6 | Model: 500W | PartNumber: 500W | Ean: 0619191721177 | UPC: 619191721177
Speed: Idling Speed Can Reach 12000Rmp.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Spindle Radial Runout 0.01-0.03Mm High Accuracy； Torque: 600Mn.M.
Diameter: 52Mm; Total Length Of Motor:200Mm.
Features
- Power: 500W; Operating Voltage: 48VDC
- Diameter: 52mm; Total length of motor:200mm
- Speed: Idling speed can reach 12000RMP
- Spindle radial runout 0.01-0.03mm high accuracy Torque: 600mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 7.83 x 2.05 inches | Weight: 2.09 Pounds
See On Amazon #14
CNC Motor Bracket, Aluminum Spindle Motor Mount Bracket Clamp with Screws Tool Set for Spindle CNC Engraving Millng Machine(80MM Clamp)
Asin: B08MXT8LT9 | Model: Vipxycho5ze4itsg | PartNumber: Vipxycho5ze4itsg | Ean: 9586530809654
◇【Advantage】-Compact Size, No Scratch, Superior Performance. High Precision Dimensional, More Stable..
◇【Package List】-1* Cnc Motor Bracket, 4* Screws..
◇【Performance】-Not Easy To Rust, Wear-Resistance And -Resistance..
◇【Description】-This Is A Great Bracket Holder To Fix The Motor Tightly. Mounting Screws Are Included, Easy To Use..
Features
- High Quality -This CNC Motor Bracket Made of high quality aluminum alloy, high strength, durable and reliable.
- Description -This is a great bracket holder to fix the motor tightly. Mounting screws are included, easy to use.
- Advantage -Compact size, no scratch, superior performance. High precision dimensional, more stable.
- Performance -Not easy to rust, wear-resistance and -resistance.
- Package List -1* CNC Motor Bracket, 4* Screws.
- See more on Amazon...
Brand: Vipxyc | Manufacturer: Vipxyc
Dimensions: 3.54 x 6.69 x 4.33 inches
See On Amazon #15
RATTMMOTOR ER11 Spindle Motor 300W Air-Cooled Spindle Motor 52mm 12-48VDC 12000RPM 400mN.m for DIY CNC Router Engraver Milling Machine
Asin: B08GKK77W8 | Model: RTMER11 | PartNumber: RTMER11 | Ean: 0619191721023 | UPC: 619191721023
Speed: Idling Speed Can Reach 12000Rpm.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Frequency: 0-400Hz； Torque: 400Mn.M.
Diameter: 52Mm; Total Length Of Motor:175Mm.
Features
- Power: 300W; Operating Voltage: 12-48VDC
- Diameter: 52mm; Total length of motor:175mm
- Speed: Idling speed can reach 12000RPM
- Frequency: 0-400Hz Torque: 400mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.05 x 0.01 x 0.00 Inches
See On Amazon #16
RATTMMOTOR 800W Spindle Motor Kit, 0.8KW 110V ER11 20000RPM 0.79NM Air Cooled DC Spindle Motor+Mach3 Fuction Motor Speed Controller Power Supply Converter AC110V/220V+52mm Mount Clamp for CNC Machine
Asin: B09X2H7M96 | Model: 800W110V-5 | PartNumber: 800W110V-5
【Speed Controller】 Power :800W; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast); Support Mach3 Fuction..
【Features】With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
【Note】This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
【Advantages】This Power Regulator Can Adjust 110 Or 220V According To Customers' Needs. Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000R/Min; Torque：0.79Nm; Diameter: 52Mm..
Features
- Supports Reverse Rotation As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
- Air Cooled Spindle Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque 0.79NM; Diameter: 52mm.
- Speed Controller Power :800W; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
- Advantages This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- Features With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 8.01 x 0.00 inches | Weight: 3.75 pounds
Warranty: one year warranty
See On Amazon #17
Daedalus 52mm Spindle Clamp Mounting Bracket Use for Spindle CNC Milling Motor Machine (52MM Clamp)
Asin: B085T7N15J | Ean: 0717461966171 | UPC: 717461966171
【Exterior Design】Unique Slot Design, Easy To Lock, High - Precision, And Easy To Remove With Non-Slip Teeth..
【Applicable】52Mm Normally Used To Replace The Spindle Fixture Of The Spindle Of A 300W 500W Er11 Er16 Brushed Spindle Motor For Cnc Engraving Machine..
【High Quality】High Hardness, Good Elasticity, And Not Easy To Deform..
【Surface】All-Sandblasting Process, Seismic Capability, Long Service Life..
Features
- Premium Material Engraving machine aluminum clamper , cast aluminum material, not easy slide wire, beautiful and durable.
- Surface All-sandblasting process, Seismic capability, long service life.
- Exterior Design Unique slot design, easy to lock, high - precision, and easy to remove with non-slip teeth.
- High Quality High hardness, good elasticity, and not easy to deform.
- Applicable 52MM normally used to replace the spindle fixture of the spindle of a 300w 500w ER11 ER16 brushed spindle motor for CNC engraving machine.
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
See On Amazon #18
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 Inches | Weight: 2.54 Pounds
See On Amazon #19
VFD CNC Spindle Motor Kits 220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm 80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
Asin: B078J5CXP3 | Ean: 0724509858589 | UPC: 724509858589
【Package Include】1 X 220V-2.2Kw Vfd, 1 X2.2Kw Φ80mm 24000Rpm Er20 Spindle.1 X 220V-75W Water Pump ,1 X 80Mm Motor Clamp,1 X 5M Horse.
【Warranty】One Year Warranty (The Spindle Is Half A Year).If There Is An Alarm In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Wide Range Of Applications】The Spindle Motor Applied To: Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine, Small Sized Processing Center, High Speed Centrifuge Etc..
【Parameter Settings】All Basic Parameterhave Been Set Up, The Customer Can Directly Connect And Start When Receiving The Product.
Features
- Connection way The package only supports AC 200V-240V 1 or 3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor pin1=U,pin2=V,pin3=W,pin4=ground
- Parameter Settings All basic parameterhave been set up, the customer can directly connect and start when receiving the product
- Package Include 1 x 220V-2.2KW VFD, 1 x2.2KW 80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m horse
- Wide range of applications The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
- Warranty one year warranty (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Dimensions: 9.50 x 171.00 x 17.50 inches | Weight: 21.00 pounds
See On Amazon #20
CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet
Asin: B06VY6PM6N | Ean: 0713839364006 | UPC: 713839364006
✅【Energy-Efficient Water Pump】Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60Hz, Size: L4.8Xw3.5Xh4.3 In. This Is A High-Performance, Save Time And Effert Pump And Is Well-Designed For Use In Spindle, Structure Is Compact And Four Powerful Rubber Suction Cups Can Absorb Shock And Prevent Fall Off. The Faucet Is Made Of Brass: Great Quality, Durable And Does Not Rust..
✅【 Support】 Covered By 1-Year Manufacturer Warr Anty. If You Get Stuck, Contact Us With Any Questions That Arise, Your Satisfaction Is Important And We'll Work To Resolve Your Issues..
✅【 Package Include】① 1 X 110V 2.2Kw Spindle Motor ②1 X 110V 2.2Kw Vdf Inverter ③1 X 110V 75W Water Pump ④1 X 196 In Water Pipes ⑤1 X 3.15 In Spindle Clamp ⑥2 X Wrench ⑦ 1 X 40 In Wire ⑧ 10 X Drill Bits ⑨13 X Er20 Collet Set Gripping Range.
✅ 【Vfd Inverter】 Power: 2.2 Kw; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 Phase Or 3 Phase; Output Phase: 3 Phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. Supports Multiple Frequency Settings: Digital Setting, Analog Setting, Pid Setting, Rs485 Communication Setting,Ect; Dc Cooling Fan Low Noise, Large Air Volume. Perfect Match With The Water Cooled Spindle Motor!.
Features
- Spindle Technical Parameters Spec: 2.39 x 11.37 in (Diameter: 7.2 cm x Length: 28.9 cm) Power: 2.2 KW; Voltage: 110V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 11.46 ib. Mainly used for engraving machine or used with frequency converter.
- VFD Inverter Power: 2.2 KW; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect; DC cooling fan low noise, large air volume. Perfect match with the water cooled spindle motor!
- Energy-efficient Water Pump Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performance, save time and effert pump and is well-designed for use in spindle, structure is compact and four powerful rubber suction cups can absorb shock and prevent fall off. The faucet is made of brass: great quality, durable and does not rust.
- Package include 1 x 110V 2.2KW Spindle Motor 1 x 110V 2.2KW VDF Inverter 1 x 110V 75W Water Pump 1 x 196 in Water Pipes 1 x 3.15 in Spindle Clamp 2 x Wrench 1 x 40 in wire 10 x Drill Bits 13 x ER20 Collet Set Gripping Range
- Support Covered by 1-year manufacturer warr anty. If you get stuck, contact us with any questions that arise, your satisfaction is important and we'll work to resolve your issues.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: MYSWEETY
Dimensions: 11.01 x 18.49 x 17.71 inches | Weight: 18.73 pounds
See On Amazon
Looking For Something Else?
Search