Peachtree Woodworking Supply 24 inch 38 inch and 50 inch Anodized Aluminum Straight Edge Bars, for Checking Straightness On Metal Surface Tops Whet Stones Machinery and to Mark Or Scribe Lines
Asin: B07H4235V3 | Model: 11508 | PartNumber: 11508 | Ean: 0817918021573 | UPC: 817918021573
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
The Bars Measure 3/8” Thick By 1¾” Tall Which Is Just The Right Size To Stand Upright Unsupported So You Can Free Up Both Hands To Make Adjustments To Your Tools Or Table Tops. 24 Inch Straight Edge Has A .001" Tolerance, The 38 Inch Straight Edge Has A .002" Tolerance And The 50 Inch Straight Edge Has A .003" Tolerance..
The Aluminum Straight Edge Is That Tool And It Is Accurate To Exacting Tolerances Which Makes It Perfect For Checking Wet Stones, Jointers, Planers, Power Tools, General Machinery, Table Tops, Counter Tops And More For Flatness. Works Exceptionally Well Where There Is A Seam To Make Sure Both Sides Are Absolutely Even..
Introducing The Lightweight And Easy To Use Fulton Aluminum Straight Edge. Use The Straight Edge To Properly Check For Flatness, So You Can See If Your Work Surface Has Any Gaps, Pits Or Any Type Of Undulation That May Catch, Hook Or Slow Down Your Material While Feeding It Through A Blade, Cutter Or Simply While Working..
Features
- Sometimes you need to have your work surface just right for your projects. Whether you re a woodworker, metal worker or hobbyist, when you need a flat work surface you simply just need it. Finding an economical tool to check for flatness used to be quite the challenge. Not anymore!
- Introducing the lightweight and easy to use Fulton Aluminum straight edge. Use the straight edge to properly check for flatness, so you can see if your work surface has any gaps, pits or any type of undulation that may catch, hook or slow down your material while feeding it through a blade, cutter or simply while working.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The Aluminum Straight Edge is that tool and it is accurate to exacting tolerances which makes it perfect for checking wet stones, jointers, planers, power tools, general machinery, table tops, counter tops and more for flatness. Works exceptionally well where there is a seam to make sure both sides are absolutely even.
- The bars measure 3/8 thick by 1 tall which is just the right size to stand upright unsupported so you can free up both hands to make adjustments to your tools or table tops. 24 inch straight edge has a .001 tolerance, the 38 inch straight edge has a .002 tolerance and the 50 inch straight edge has a .003 tolerance.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodoworking Supply Inc.
Dimensions: 0.01 x 8.00 x 1.00 inches
See On Amazon Similar To Peachtree Woodworking Supply 24 inch
#1
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop
Asin: B001N1FYSI | Model: 1264 | PartNumber: 1264 | Ean: 0810948010012, 0735090027698 | UPC: 810948010012, 735090027698
Our Taper Jig Will Most Certainly Enhance Your Woodworking Abilities And Your Woodworking Projects. This Easy To Use Jig Is Fully Adjustable For Right Or Left Hand Use. As Well As Its Ability To Work On Either The Left Or Right Side Of Your Table Saw Fence..
Constructed Of Durable Aluminum The Fulton Taper Cutting Jig Comes With An Easy Grip Handle, Adjustable 24 Inch Rails With Fixed Stop, Easy-To-Read Graduated Scale That Measures 0 To 15 Degrees Of Taper (Or 3 Inches Per Foot) And Full Instruction Sheet..
Two Ways To Set The Jig. First Use The Scale That Has Markings Up To 15 Degrees Of Taper. Second Mark The Starting Cut At One End And Then Mark The Exit Cut At The Other End Of Your Piece Of Stock. Then Simply Adjust The Taper Jig To Match Those Two Marks..
The Fulton Taper Cutting Jig Has Been Designed To Make Long Rip Cuts At Angles From 1 Deg To 15 Degrees Using Your Table Saw. Perfect For Building Woodworking Projects Like Table Legs, Chair Legs, Magazine Racks And More Where Slight Tapers Are Common..
Features
- Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
- The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.
- Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
- Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
- Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 1.50 x 24.40 x 3.00 inches | Weight: 1.79 pounds
See On Amazon #2
Peachtree Woodworking Supply ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
Asin: B07L18YFVC | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0810948017516 | UPC: 810948017516
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: ProGrip
Weight: 10.54 Pounds
See On Amazon #3
Peachtree Woodworking Supply Stainless Steel Center Finding Ruler. Ideal for Woodworking, Metal Work, Construction and Around The Home (24" Ruler)
Asin: B001N1FR8K | Model: PW1366 | PartNumber: PW1366 | Ean: 7535001690019, 0810948014966 | UPC: 810948014966
To Use The Ruler, Simply Line The Ruler Up So That The Increments Are The Same On Both Outside Edges Of The Object Your Are Measuring. Make Your Mark At The Center Point And There You Have It! It Literally Takes Seconds To Find Center With This Super Easy To Use Ruler..
The Ruler May Also Be Used As A Standard Type Ruler With The 16Th Scale On The Bottom Side. This Makes The Center Finder Ruler Even More Versatile. The Center Finding Ruler Is Available In 12” And 24” Sizes, Which Are Both Sold Separately..
The Ruler Is Made 1Mm Thick Stainless Steel And Flexes Just The Right Amount For Most Any Project While Still Remaining Rigid Enough So Its Not Flopping All Over When In Use. Starting From “0” In The Middle Of The Ruler, The Scale Is In 32Nds..
The Handy Center Finder Ruler Makes It Super Quick And Super Easy Without Having To Do Any Math To Find Center. The Exact Center Is Clearly Marked With A Circle And A Fine Point Arrow To Make It Easy To See..
Features
- When trying to find the center on rectangular, square or even round objects it can sometimes be challenging at best. While you could always measure the length, divide the number in half then measure to that point and mark it, why waste that valuable time.
- The handy center finder ruler makes it super quick and super easy without having to do any math to find center. The exact center is clearly marked with a circle and a fine point arrow to make it easy to see.
- To use the ruler, simply line the ruler up so that the increments are the same on both outside edges of the object your are measuring. Make your mark at the center point and there you have it! It literally takes seconds to find center with this super easy to use ruler.
- The ruler is made 1mm thick stainless steel and flexes just the right amount for most any project while still remaining rigid enough so its not flopping all over when in use. Starting from 0 in the middle of the ruler, the scale is in 32nds.
- The ruler may also be used as a standard type ruler with the 16th scale on the bottom side. This makes the center finder ruler even more versatile. The Center Finding Ruler is available in 12 and 24 sizes, which are both sold separately.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #4
Pro-Grip Straight Edge Clamps (24" Clamp)
Asin: B0013GJ4XY | Model: 589 | PartNumber: 589 | Ean: 0810948014164 | UPC: 810948014164
The Unique 2-3/16" Wide Tube Rail Construction Keeps The Pro-Grip Clamps Light And Easy To Use, Yet More Rigid Than Other Similar Clamps On The Market. Low Profile Jaws (That Never Get In The Way) Are Perfect For Sanding And Routing Projects..
The Smooth Cam Lock Is A One-Hand Operation And Has 3 Varying Levels Of Pressure For Just The Right Amount Of Grip. This Package Includes 1 Each 24" Clamp..
Get Straight And Accurate Cuts, Dados And Grooves Simply By Aligning The Clamp On Your Marks, Securing The Clamp And Make The Cut. The Jaws Firmly Hold Any Piece To The Full Length Of The Clamp Without Any Side-To-Side Play..
Use Them As A Fence On Your Bandsaw Or Drill Press, Or Even As An Auxiliary Fence On Your Router Table Or Table Saw. The Pro Grip Straight Clamps Feature: An Extruded Aluminum Body That Is Light Weight And Durable..
Features
- Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing.
- Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable.
- The unique 2-3/16 wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects.
- Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play.
- The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24 clamp.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: ProGrip
Dimensions: 1.50 x 24.00 x 1.50 inches | Weight: 1.50 Pounds
See On Amazon #5
Peachtree Woodworking Supply 32" L Table Fence Pre-drilled - PW1098
Asin: B000H5LG5G | Ean: 0810948012641 | UPC: 810948012641
Can Mount On A Drill Press Table, Router Table, Band Saw Fence & Many Other Tools.
Can Be Used With All Kinds Of Shop Built Jigs & Tables.
Also Available In 24" (Sold Separately).
32" Fence Has Two 1/4" Slots For Mounting & Center Hole Cut Out.
Features
- L Shaped aluminum ready to mount on the router table or other setups
- 32 Fence has two 1/4 slots for mounting & center hole cut out
- Can mount on a drill press table, router table, band saw fence & many other tools
- Also available in 24 (Sold separately)
- Can be used with all kinds of shop built jigs & tables
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
Dimensions: 0.13 x 3.00 x 32.00 Inches
See On Amazon #6
KEYSTONE HIGH QUALITY 4" X 24" SANDING BELT 220X - 5 PACK by Peachtree Woodworking - PW6047
Asin: B000UEBPDC | Ean: 0810948011347 | UPC: 810948011347
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 Pack includes 5 belts of 220 grit.
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #7
Peachtree Woodworking Supply 22" Miter Extension Fence - PW1099
Asin: B000O2KNJ2 | Ean: 0810948011897 | UPC: 810948011897
Adjustable Aluminum Fence Increases The Face Of Your Miter Gauge Or Saw..
Stop Block With Knobs And Bolts Included..
Built In Extension Bar To Increase The Stop Capacity To 36"..
Works On The Left Side Or Right Side Of Your Saw..
Features
- Will improve work support close to the saw blade.
- Works on the left side or right side of your saw.
- Adjustable aluminum fence increases the face of your miter gauge or saw.
- Built in extension bar to increase the stop capacity to 36.
- Stop block with knobs and bolts included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon #8
Peachtree Woodworking Supply The Original Dubby Cut-Off Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side and Right Side are Included)
Asin: B09X7H967R | Ean: 0817918023225 | UPC: 817918023225
Working With Angles The Dubby Angle Scale Is The Simplest, Most Accurate And Easiest To Read Scale Available. Being About 15-20 Times More Accurate Than The Average Miter Gauge, The Scale Has Pre-Determined Lines For Any Shape (From 4 To 16 Sides) You Want To Cut. This Means No Calculations, No Hassles, And Best Of All, No Test Cuts For Perfect Results.
Will The Dubby Fit Your Saw? The Dubby Sled Is Compatible With Most Cabinet And Contractor Table Saws. However, Your Table Saw Should Fall Within The Following Specs For A Proper Fit. The Miter Slot Should Be A ¾” Wide X 3/8” Deep Slot. Your Saw Must Measure At Least 27” From The Front Of The Saw To The Back. The Miter Slot Must Be 4” To 5 ¾” From The Installed Table Saw Blade. Please Note: That The Dubby Will Not Work On Most Jobsite Style Table Saws. Please Measure Your Saw Before Ordering..
Working With Small Pieces- No Miter Gauge On The Market Can Offer You The Margin Of Safety Provided By The Dubby Sled. The Versatile Hold-Down Clamp Included With Every Dubby Will Give You An Extremely Safe Way To Cut Small Pieces, And Will Easily Pivot Out Of The Way When You Don’T Need It. With 35Lbs. Of Hold Down Pressure, The Clamp Will Hold Small Pieces All The While Keeping Your Hands And Fingers Out Of Harms Way..
Working With Large Panels The Dubby Has The Capacity To Crosscut Panels Up To 24″ Wide X 52″ Long, And Allows You To Do Them Safely. Since The Panels Don’T Make Contact With The Table Saw Top, “Walking” Of The Material Is Virtually Eliminated. This Will Allow You To Cut Perfectly Square Panels For Your Furniture And Cabinet Making Projects Quickly, Easily And Accurately..
Features
- THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way.
- WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24 wide x 52 long, and allows you to do them safely. Since the panels don t make contact with the table saw top, walking of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately.
- WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results
- WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands and fingers out of harms way.
- WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the following specs for a proper fit. The Miter Slot should be a wide x 3/8 deep slot. Your saw must measure at least 27 from the front of the saw to the back. The miter slot must be 4 to 5 from the installed table saw blade. PLEASE NOTE: that the Dubby WILL NOT work on most JOBSITE style table saws. Please measure your saw before ordering.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 20.00 pounds
See On Amazon #9
Peachtree Woodworking Supply 16" Table Saw Extension Kit PW1007
Asin: B000O2KNHY | Ean: 0810948011880 | UPC: 810948011880
2Ea. 11" Table Brackets $12.99 Value.
1Ea. Extension Table Plan $8.99 Value.
1Ea. 32" Miter Track $12.99 Value & 4 Ea. Star Knobs And Bolts $6.00 Value.
2Ea. 24" Sections Of T-Track $25.95 Value.
Features
- WOOD PLATFORM AND SAW ARE NOT INCLUDED: The kit includes the following parts;
- 2ea. 24 Sections of T-Track $25.95 value
- 2ea. 11 Table Brackets $12.99 value
- 1ea. 32 Miter Track $12.99 value & 4 ea. Star Knobs and Bolts $6.00 value
- 1ea. Extension Table Plan $8.99 value
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking
See On Amazon #10
Peachtree Woodworking Supply 1021 24" Aluminum Mini T Track
Asin: B000H4Z03Q | Ean: 0810948013396, 0798167695756 | UPC: 798167695756, 810948013396
Build Jigs & Fixtures For Your Radial Arm Saw, Workbench, Drill Press, Miter Saw.
Made In The Usa!.
Mount Anti-Kickback Devices To Your Table Saw Fence Or Router Table Fence.
Standard 1/4" Hex Head Bolt That Slides Into The Track.
Features
- T-Track has 1/8" wall which will not bow or twist, center drilled for easy mounting
- Standard 1/4 hex head bolt that slides into the track
- Build jigs & fixtures for your radial arm saw, workbench, drill press, miter saw
- Mount anti-kickback devices to your table saw fence or router table fence
- MADE IN THE USA!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #11
KEYSTONE HIGH QUALITY 4" X 24" SANDING BELT 80X - 5 PACK by Peachtree Woodworking - PW6043
Asin: B000UEFUI8 | Ean: 0810948011309 | UPC: 810948011309
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 Pack includes 5 belts of 80 grit.
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #12
24" Aluminum Fence Blanks By Peachtree Woodworking - PW1094
Asin: B000H5LG5Q | Ean: 0810948012665 | UPC: 810948012665
Also Available In 32" Blank (Sold Separately).
Can Be Used With All Kinds Of Jigs.
They Are Straight So You Can Mount Them On Many Of Your Shop Machines.
Features
- L Shaped aluminum blank fence for you to customize to meet your specifications
- They are straight so you can mount them on many of your shop machines
- Also available in 32 blank (Sold separately)
- Can be used with all kinds of jigs
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #13
Peachtree Woodworking Supply PRO-GRIP CLAMPS 5 PIECE DELUXE PACKAGE PW604
Asin: B0036VKMYO | Model: 604 | PartNumber: 604 | Ean: 0810948017523 | UPC: 810948017523
Unbreakable Jaws Firmly Hold Any Piece To The Full Length Of The Clamp.
Adjustable Scale And Two Accessory T-Tracks - One Hand Operation.
No Side To Side Movement.
Straight, Accurate Cuts, Dados And Grooves.
Features
- Includes: 1 - 24", 1 - 36" 1 - 50" AND 2 - 50" Back to Back Straight edge clamps
- Straight, accurate cuts, dados and grooves
- Unbreakable jaws firmly hold any piece to the full length of the clamp
- No side to side movement
- Adjustable scale and two accessory T-Tracks - one hand operation
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply
See On Amazon #14
KEYSTONE HIGH QUALITY 4" X 24" SANDING BELT - 5 PACK ASSORTMENT by Peachtree Woodworking - PW6041
Asin: B000UEBPBO | Ean: 0810948011286 | UPC: 810948011286
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 pack assortment includes 1 ea; 80x, 100x, 120x, 150x, 220x
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #15
KEYSTONE HIGH QUALITY 3" X 24" SANDING BELT 80X - 5 PACK by Peachtree Woodworking - PW6036
Asin: B000UEBPBE | Ean: 0810948011231 | UPC: 810948011231
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 Pack includes 5 belts of 80 grit.
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #16
KEYSTONE HIGH QUALITY 4" X 24" SANDING BELT 60X - 5 PACK by Peachtree Woodworking - PW6042
Asin: B000UEH8I8 | Ean: 0810948011293 | UPC: 810948011293
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 Pack includes 5 belts of 60 grit.
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #17
KEYSTONE HIGH QUALITY 3" X 24" SANDING BELT 220X - 5 PACK by Peachtree Woodworking - PW6040
Asin: B000UEDSTQ | Ean: 0810948011279 | UPC: 810948011279
Antistatic, Washable Plus An Additive In The Resin To Resist Loading..
Available In 60X, 80X, 120X, 150X & 220X (Each 5 Pack Sold Separately).
Excellent For Making Both Narrow & Wide Belts..
Made With Special Open Coat A/O Grain & Strong "X" Weight Poly Cotton Backing..
Features
- 5 Pack includes 5 belts of 220 grit.
- Made with special open coat A/O grain & strong X weight poly cotton backing.
- Antistatic, washable plus an additive in the resin to resist loading.
- Excellent for making both narrow & wide belts.
- Available in 60x, 80x, 120x, 150x & 220x (EACH 5 PACK SOLD SEPARATELY)
- See more on Amazon...
Brand: Keystone | Manufacturer: KEYSTONE
See On Amazon #18
Drill Press T-Track Kit by Peachtree Woodworking - PW1011
Asin: B000O2HB4C | Ean: 0810948011910 | UPC: 810948011910
5Ea. Star Knobs And Bolts $7.50 Value.
2Ea. Small Toggle Clamps $19.99 Value & Deluxe Drill Press Plans $10.99 Value.
2Ea. Post Knobs And Bolts $5.99 Value.
6Ea. 24" Long Heavy Duty T-Track Sections $79.95 Value.
Features
- WOOD PLATFORM NOT INCLUDED: The kit includes the following parts;
- 6ea. 24 Long Heavy Duty T-Track Sections $79.95 value
- 5ea. Star Knobs and Bolts $7.50 value
- 2ea. Post Knobs and Bolts $5.99 value
- 2ea. Small Toggle Clamps $19.99 value & Deluxe Drill Press Plans $10.99 value
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #19
Fulton 24" Universal Double Cut Aluminum T Track 2 Pack with One Intersection Track Kit
Asin: B08LW37ZC6 | Model: 10621 | PartNumber: 10621 | Ean: 0817918022761 | UPC: 817918022761
The Track Can Be Used In A Wide Variety Of Ways Including On Top Of Fences For Adding Jigs And Fixtures. The Track Can Also Be Used By Embedding Them Into Table Tops Or Workbenches To Give You A Long Hold Down Run. The 3/4” X 3/8” Also Allows You To Use The Track In A Standard 3/4” X 3/8” Miter Slot Like A Standard Miter Bar. Simply Attach A Few Smaller Pieces To The Bottom Of A Sled And You’Re Ready To Go..
When Securing The Track Or The Intersections Kit, You Can Use The Included Wood Screws By Themselves Or You Can Use A Polyurethane Or Epoxy Adhesive Along With The Screws. We Typically Will Only Add Adhesive When Extra Clamping Pressure Will Be Required. Each Track Is Pre-Drilled And Counter Sunk To Comfortably Accept The Wood Screws..
As With The Track, The Included Intersection Kit Is Made From The Exact Same Aluminum Material. The Intersection Kit Is Designed To Give You The Ability To Cross Over Fixtures From One End Of A Table To The Other End And Change Location Throughout The Table Top Without Removing The Fixture. This Comes In Very Handy When Framing, Sanding, Planing And Other Typical Woodworking Applications..
The Unique Universal, Double Cut Profile Pulls Double Duty Since It Accepts Two Types Of Bolts. The Track Will Accept Standard 1/4” Hex Head Bolts And 5/16” T-Bolts. This Makes This Type Of Track Extra Versatile And Very Handy In Your Workshop. If You Don’T Have Either Size Of These Two Bolts, Both Sizes Are Readily Available At Most Any Hardware Or Big Box Store. Each Track Measures 3/4” Wide By 3/8” Tall Which Makes Milling The Slot Very Easy..
Features
- Made from a single piece of anodized extruded aluminum, each of the Fulton T-tracks are designed for creating jigs, fixtures and even track tables for your work shop! Add the intersection kit and you have the ability to make a table top that allows you to move hold downs, clamps and more from end to end without removing them. Track tables are great for framing, pocket hole drilling, pocket hole joint securing, sanding, planing and a whole lot more!
- The unique universal, double cut profile pulls double duty since it accepts two types of bolts. The track will accept standard 1/4 hex head bolts and 5/16 T-bolts. This makes this type of track extra versatile and very handy in your workshop. If you don t have either size of these two bolts, both sizes are readily available at most any hardware or big box store. Each track measures 3/4 wide by 3/8 tall which makes milling the slot very easy.
- The track can be used in a wide variety of ways including on top of fences for adding jigs and fixtures. The track can also be used by embedding them into table tops or workbenches to give you a long hold down run. The 3/4 x 3/8 also allows you to use the track in a standard 3/4 x 3/8 miter slot like a standard miter bar. Simply attach a few smaller pieces to the bottom of a sled and you re ready to go.
- As with the track, the included intersection kit is made from the exact same aluminum material. The intersection kit is designed to give you the ability to cross over fixtures from one end of a table to the other end and change location throughout the table top without removing the fixture. This comes in very handy when framing, sanding, planing and other typical woodworking applications.
- When securing the track or the intersections kit, you can use the included wood screws by themselves or you can use a polyurethane or epoxy adhesive along with the screws. We typically will only add adhesive when extra clamping pressure will be required. Each track is pre-drilled and counter sunk to comfortably accept the wood screws.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon
Looking For Something Else?
Search