uxcell 5mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS3Z1G8
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 5mm / 0.2"; punching length: 39mm / 1.53"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon Similar To uxcell 5mm Paper Punch Drill
#1
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Black for Wood Metal Plastic 2pcs
Asin: B0B5256JF4 | Model: a22050500ux0841 | PartNumber: a22050500ux0841
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Chrome Plated Steel Handle Has High Hardness, Good Wear Resistance. It Can Extend The Service Life Of The Punching Tool..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Chrome plated steel handle has high hardness, good wear resistance. It can extend the service life of the punching tool.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 7mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS4167Y | Model: a18102000ux0040 | PartNumber: a18102000ux0040
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 7mm / 0.28"; punching length: 40mm / 1.57"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 Inches
See On Amazon #3
uxcell 5Pcs Straight Ejector Pins, 5mm (0.2") Dia. SKD61 Round Tip Punch 100mm (4") Long for Mechanical Maintenance
Asin: B0CSDPCKDS
Material - Made Of Well-Grade Skd61 Die Steel With Quenched And Tempered Surface Treatment And Hrc: 55-58Rc. This Ejecting Pin Punch Has The Characteristics Of High Elastic Limit, High Strength, High Harden-Ability And Good Machinability..
Application - Suitable For Working In High Temperature Operating Environment. Applied In Fitter, Die Manufacturing, Leather Crafting, Machinery Maintenance And Processing Industries. Ejecting Or Pushing The Plastic Parts When In Plastic Injection Punching..
Practical Parts - The Steel Straight Ejector Pin, Can Also Be Called A Punching Rod Or Punching Needle Which Is An Essential Metal Part On Stamping Die In Mechanical Tools..
Feature - The Ejector Pin Punch Is Long, Straight, With Non-Chipping Surface, And Has A Round Tip. Not Easy To Be Bent Or Deformed When Working..
Features
- Size - Shank Diameter: 5mm/ 0.2"; Head Diameter: 8mm/ 0.31"; Head Thickness: 5mm/ 0.2"; Total Length: 100mm/ 4"; Package Content: 5 x Ejector Pin Punch
- Feature - The ejector pin punch is long, straight, with non-chipping surface, and has a round tip. Not easy to be bent or deformed when working.
- Material - Made of well-grade SKD61 die steel with quenched and tempered surface treatment and HRC: 55-58rc. This ejecting pin punch has the characteristics of high elastic limit, high strength, high harden-ability and good machinability.
- Practical Parts - The steel straight ejector pin, can also be called a punching rod or punching needle which is an essential metal part on stamping die in mechanical tools.
- Application - Suitable for working in high temperature operating environment. Applied in fitter, die manufacturing, leather crafting, machinery maintenance and processing industries. Ejecting or pushing the plastic parts when in plastic injection punching.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Center Punch with Octagon Shank, 5" Length, 1/5" Tapered Point Diameter
Asin: B07S18SQYC | Model: a19032100ux0898 | PartNumber: a19032100ux0898
[Sharp Marking Point] - With A Dimple To Create An Exact Starting Spot For Drill That Prevents It From Wandering..
[Wide Use] - It Works On Just About Any Material Softer Than The Point Itself, Including Cast Iron, Mild Steel, Brass, Bronze, Copper, Aluminum, Wood, And Even Plastics And Polymers..
[] - The Tapered Shaft And Sharp Point Are Precisely Machined To Meet Exacting Size Tolerances, Ensuring They Are Straight And True..
[Material] - Made From Carbon Steel, Each Punch Is Individually Heat Treated To Harden And Strengthen The Tip..
Features
- [SIZE] - 1/5" (5mm) diameter tapered point, 4.72" (120mm) long.
- [MATERIAL] - Made from carbon steel, each punch is individually heat treated to harden and strengthen the tip.
- [SHARP MARKING POINT] - With a dimple to create an exact starting spot for drill that prevents it from wandering.
- [] - The tapered shaft and sharp point are precisely machined to meet exacting size tolerances, ensuring they are straight and true.
- [WIDE USE] - It works on just about any material softer than the point itself, including cast iron, mild steel, brass, bronze, copper, aluminum, wood, and even plastics and polymers.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 10mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS2ND95 | Model: B07KS2ND95 | PartNumber: B07KS2ND95
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 10mm / 0.39"; punching length: 42mm / 1.65"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #6
uxcell 6mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine, 2pcs
Asin: B07KS3T21Z | Model: a18102000ux0025 | PartNumber: a18102000ux0025
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 6mm / 0.24"; punching length: 40mm / 1.57"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #7
uxcell Hollow Paper Drill Bit 3.5mmx70mm, 2.5mmx65mm for Straight Shank Punch Punching Machine 2pcs
Asin: B0BQZQNYFN | Model: f22040600ux0309 | PartNumber: f22040600ux0309
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching Length: 33mm/1.3", 21mm/0.83"; Punching Diameter: 3.5mm/0.14", 2.5mm/0.1"; Shank Diameter: 11mm; Total Length: 70mm/2.75", 65mm/2.56"
- Applications: Specially used for punching tags, wall calendars, desk calendars, books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Automatic Center Hole Punch Spring Loaded 5 inch Adjustable Impact Hand Tool for Metal Wood, Cr-V Steel with Brass Case 2pcs
Asin: B07TSHF839 | Model: a19042700ux0291 | PartNumber: a19042700ux0291
[Adjust For Accuracy]: Spring-Driven Action With Adjustable Strike Force Makes Punching Easier With This Simple To Use Nail Punch Tool Drill Marker..
[Wide Application]: Use This Automatic Center Punch For Metal (Aluminum, Brass, Copper), Wood, Glass, Canvas, Plastic And Leather Materials. Also Can Be Used As Glass Window Breaker For Occasion Or As Spring Loaded Awl For Belts And Purses..
[Grip Comfortably]: Knurled Non-Slip Surface On Spring Loaded Nail Punch Shaft Allows For Comfortable Work And Reduced User Fatigue While The Precision Centered Tip Increases Control For More Accurately Placed Holes..
[Easy To Use]: Increase And Decreased The Stroke For Higher Or Lower Impact By Tightening And Loosening The Adjustable Cap On The Nail Set Punch Nail Hammer Tool..
Features
- [Premium Grade]: Made of hardened Cr-V steel that holds up to high impact, provides wear resistance, rust proof and strength to prolong the tool s life.
- [Easy to Use]: Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
- [Adjust for Accuracy]: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
- [Grip Comfortably]: Knurled non-slip surface on spring loaded nail punch shaft allows for comfortable work and reduced user fatigue while the precision centered tip increases control for more accurately placed holes.
- [Wide Application]: Use this automatic center punch for metal (aluminum, brass, copper), wood, glass, canvas, plastic and leather materials. Also can be used as glass window breaker for occasion or as spring loaded awl for belts and purses.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 10Pcs Straight Ejector Pins, 5mm (0.2") Dia. SKD61 Round Tip Punch 100mm (4") Long for Mechanical Maintenance
Asin: B0CSDM477D
Material - Made Of Well-Grade Skd61 Die Steel With Quenched And Tempered Surface Treatment And Hrc: 55-58Rc. This Ejecting Pin Punch Has The Characteristics Of High Elastic Limit, High Strength, High Harden-Ability And Good Machinability..
Application - Suitable For Working In High Temperature Operating Environment. Applied In Fitter, Die Manufacturing, Leather Crafting, Machinery Maintenance And Processing Industries. Ejecting Or Pushing The Plastic Parts When In Plastic Injection Punching..
Practical Parts - The Steel Straight Ejector Pin, Can Also Be Called A Punching Rod Or Punching Needle Which Is An Essential Metal Part On Stamping Die In Mechanical Tools..
Feature - The Ejector Pin Punch Is Long, Straight, With Non-Chipping Surface, And Has A Round Tip. Not Easy To Be Bent Or Deformed When Working..
Features
- Size - Shank Diameter: 5mm/ 0.2"; Head Diameter: 8mm/ 0.31"; Head Thickness: 5mm/ 0.2"; Total Length: 100mm/ 4"; Package Content: 10 x Ejector Pin Punch
- Feature - The ejector pin punch is long, straight, with non-chipping surface, and has a round tip. Not easy to be bent or deformed when working.
- Material - Made of well-grade SKD61 die steel with quenched and tempered surface treatment and HRC: 55-58rc. This ejecting pin punch has the characteristics of high elastic limit, high strength, high harden-ability and good machinability.
- Practical Parts - The steel straight ejector pin, can also be called a punching rod or punching needle which is an essential metal part on stamping die in mechanical tools.
- Application - Suitable for working in high temperature operating environment. Applied in fitter, die manufacturing, leather crafting, machinery maintenance and processing industries. Ejecting or pushing the plastic parts when in plastic injection punching.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 5mm Dia Metal Knurled Shank Hollow Hole Punch for Leather Gasket Strap
Asin: B01MUB6KIA | Model: a16121700ux0692 | PartNumber: a16121700ux0692 | Ean: 0604267040573 | UPC: 604267040573
Heat-Hardened Make For Long Lasting Sharpness And Durability.
Recommended For Falconry , Hobbies ,Crafts , Modeling , Home Repair, Etc..
Easily Punch Precise Holes In Gasket, Vinyl, Leather, Wood, Belt, Plastic And Other Soft Materials With This Hollow Hole Punch..
Hard-To-Find, Hollow Punch Set For Precise Holes In Leather Or Plastic..
Features
- Punch size:1mm Dia
- Hard-to-find, hollow punch set for precise holes in leather or plastic.
- Heat-hardened make for long lasting sharpness and durability
- Easily punch precise holes in gasket, vinyl, leather, wood, belt, plastic and other soft materials with this hollow hole punch.
- Recommended for falconry , hobbies ,crafts , modeling , home repair, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Hole Punch Drill Set, 3mm 4mm Hole Punching Taper Shank Hollow Drill Bits for Paper Tags Calendars Leather Handbags 2pcs
Asin: B0C55GSXGB | Model: f22030300ux0104 | PartNumber: f22030300ux0104
Features: It Is Polished, Overall Quenching, High Hardness (Hardened To 52-55Hrc), Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block..
Tips: The Smaller The Pinhole, The Slower The Speed. If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill..
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. Taper Shank (A): Installed On The Machine Without Screws, Not Easy To Disassemble. Straight Shank (H): Installed On The Machine With Screws, Easy To Disassemble..
Wide Applications: Widely Used For Punching Tags, Wall Calendars, Desk Calendars, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc...
Features
- Hole Punch Drill: Punching Diameter: 3mm / 0.12", 4mm / 0.16"; Shank Diameter: 10.7mm-11.7mm; Punching Length: 28mm / 1.1", 34mm / 1.34"; Total Length:65mm / 2.56", 70mm / 2.75"; Shank Type: Taper Shank (no screws required when installing)
- Wide Applications: Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
- Features: It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
- Easy to Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
- Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Automatic Center Punch HSS Adjustable Spring Loaded Drill Tools Black
Asin: B07TDKGR2M | Model: a19032700ux0272 | PartNumber: a19032700ux0272
Easy Use: Automatic Center Punch Has One-Handed Impact Operation, No Hammer Needed..
Applications: It Can Accommodate Various Types Of Materials Such As Plastic, Wood, Metal, Glass, Leather, Etc..
Knurled Body: Great Resistance To Dirt And Corrosion, Non-Slip..
Adjustable Tension: Center Punch Is Spring Loaded With Adjustable Stroke. Spring Tension Adjusts For Light Or Heavy Strokes, Marking, Punching And Staking..
Features
- Tip Material: Constructed from HSS which is durable and retains its sharpness throughout multiple uses.
- Adjustable Tension: Center punch is spring loaded with adjustable stroke. Spring tension adjusts for light or heavy strokes, marking, punching and staking.
- Easy Use: Automatic center punch has one-handed impact operation, no hammer needed.
- Knurled Body: Great resistance to dirt and corrosion, non-slip.
- Applications: It can accommodate various types of materials such as plastic, wood, metal, glass, leather, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Black with Cap for Wood Metal Plastic
Asin: B0B52HZ4VD | Model: a22050500ux0850 | PartNumber: a22050500ux0850
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Chrome Plated Steel Handle Has High Hardness, Good Wear Resistance. It Can Extend The Service Life Of The Punching Tool..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Chrome plated steel handle has high hardness, good wear resistance. It can extend the service life of the punching tool.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Red with Cap for Wood Metal Plastic
Asin: B0B524P9BW | Model: a22050500ux0856 | PartNumber: a22050500ux0856
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Anodic Oxide Films On Aluminum Alloy Handle Greatly Improve Hardness, Corrosion Resistance, Wear Resistance, And Protect Metal Surfaces..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Anodic oxide films on aluminum alloy handle greatly improve hardness, corrosion resistance, wear resistance, and protect metal surfaces.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Blue for Wood Metal Plastic 2pcs
Asin: B0B527MKXT | Model: a22050500ux0845 | PartNumber: a22050500ux0845
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Anodic Oxide Films On Aluminum Alloy Handle Greatly Improve Hardness, Corrosion Resistance, Wear Resistance, And Protect Metal Surfaces..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Anodic oxide films on aluminum alloy handle greatly improve hardness, corrosion resistance, wear resistance, and protect metal surfaces.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Hollow Paper Drill Bit 5mmx75mm, 4mmx70mm for Straight Shank Punch Punching Machine 2pcs
Asin: B0BQZSHXDR | Model: f22040600ux0308 | PartNumber: f22040600ux0308
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching Length: 39mm/1.53", 35mm/1.38"; Punching Diameter: 5mm/0.2", 4mm/0.16"; Shank Diameter: 11mm; Total Length:75mm/2.95"
- Applications: Specially used for punching tags, wall calendars, desk calendars, books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Red for Wood Metal Plastic
Asin: B0B526ML2F | Model: a22050500ux0846 | PartNumber: a22050500ux0846
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Anodic Oxide Films On Aluminum Alloy Handle Greatly Improve Hardness, Corrosion Resistance, Wear Resistance, And Protect Metal Surfaces..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Anodic oxide films on aluminum alloy handle greatly improve hardness, corrosion resistance, wear resistance, and protect metal surfaces.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 6mm Paper Punch Drill, Taper Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS3ZFXM | Model: B07KS3ZFXM | PartNumber: B07KS3ZFXM
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 6mm / 0.24"; punching length: 40mm / 1.57"; shank dia.: 10.7mm-11.7mm / 0.42"-0.46"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #19
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Black with Cap + Pointed Tip for Wood Metal Plastic 1 Set (1pcs x Center Punch, 2pcs x Pointed Tip)
Asin: B0BQF3HZF3 | Model: a22050500ux0862 | PartNumber: a22050500ux0862
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Chrome Plated Steel Handle Has High Hardness, Good Wear Resistance. It Can Extend The Service Life Of The Punching Tool..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Chrome plated steel handle has high hardness, good wear resistance. It can extend the service life of the punching tool.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell Automatic Center Punch, 5-Inch Spring-Loaded Center Hole Puncher Marker Hand Tool Adjustable Black + Silver Tone for Wood Metal Plastic 2pcs
Asin: B0BQDZJJ48 | Model: a22050500ux0865 | PartNumber: a22050500ux0865
Construction: The Bearing Steel Tip Has High And Uniform Hardness, Wear Resistance And High Elastic Limit. Chrome Plated Steel Handle Has High Hardness, Good Wear Resistance. It Can Extend The Service Life Of The Punching Tool..
All In One: The Punching Tool Has A Mechanism That Can Strike Automatically When Downward Pressure Is Applied. No Hammer Required, Simple One-Handed Operation..
Knurled Handle: Ergonomically Designed Handheld Punch. The Knurled Surface On The Body Provides Comfortable Grip For Easy Handling And Punching Control. Used For A Wide Range Of Applications, Such As Window, Leather Belts Etc...
Wide Applications: Mainly Used For Positioning Before Drilling. Suitable For Marking Wood, Plastic, Metal, Glass, And Leather Surface. Prevent Drill Bits And Screws From Going Around..
Features
- Center Punch: Total length: 5-inch (approx.). The center punch tool is spring loaded drive with an adjustable stroke. Specially designed tapered tip to indent objects in order to drill holes in the same location without slipping.
- Wide Applications: Mainly used for positioning before drilling. Suitable for marking wood, plastic, metal, glass, and leather surface. Prevent drill bits and screws from going around.
- Construction: The bearing steel tip has high and uniform hardness, wear resistance and high elastic limit. Chrome plated steel handle has high hardness, good wear resistance. It can extend the service life of the punching tool.
- Knurled Handle: Ergonomically designed handheld punch. The knurled surface on the body provides comfortable grip for easy handling and punching control. Used for a wide range of applications, such as window, leather belts etc..
- All in One: The punching tool has a mechanism that can strike automatically when downward pressure is applied. No hammer required, simple one-handed operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search