Pro-Parts Turntable Ground Wire For Technics Part SJPB7M SL-DD22, SL-DD33, SL-J11, SL-J300, SL-J33, SL-L2, SL-L20, SL-L24, SL-L25, SL-L26, SL-QD22, and more
Asin: B07LDTJVKT | Model: 6543846851 | PartNumber: 6543846851 | Ean: 0791262412891 | UPC: 791262412891
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Turntable Pin Must Be At The Center Of The Right Hole.
Sl-Dd22, Dd33,Sl-L20, L24, L25 || Sl-Bd10, Bd20, Bd22, Bd35.
Compatible With Following Technics Turntable: Sl-Qd2, Qd22, Qd33, Qd35 || Sl-B280,Sl-D33,Sl-J33.
Part # Sjpb7m.
Features
- 4 Ft. Long Technics Turntable Ground/Earth Wire For Panasonic
- Part # SJPB7M
- The Turntable Pin must be at the center of the right hole
- Compatible With Following Technics Turntable: SL-QD2, QD22, QD33, QD35 || SL-B280,SL-D33,SL-J33
- SL-DD22, DD33,SL-L20, L24, L25 || SL-BD10, BD20, BD22, BD35
- See more on Amazon...
Brand: Poagavgs | Manufacturer: PRO-PARTS
See On Amazon Similar To ProParts Turntable Ground Wire For
#1
RCA Cable with Ground Wire, 10ft Turntable Cable Gold Plated 2RCA Male to 2RCA Male with Ground Wire Stereo Interconnect Cable UIInosoo for Turntable, Preamp, Record Player, Amplifier
Asin: B0978Y1KY9 | Model: RF0A0239A-CA | PartNumber: RF0A0239A-CA
This Cable Is Perfect For Use With All Turntables Requiring A Ground Wire, And Designed To Connect A Turntable To An Amplifier, Dj Mixer, Or Phono Preamp, Record Player And Other Equipment With 2Rca Port..
We Offer Worry-Free Warranty And Friendly Customer Service Within 12 Months For Your Confident Purchase. If You Are Not Satisfied With Any Product, Please Don’T Hesitate To Contact Us, We Will Serve You Our Best..
Length: 10Ft..
This Rca Cable Is Very Flexible, Doesn't Get Tangled, And Easy To Use. It Is Made Of High Purity Copper And Double Shileding Delivers Superior Signal Transfer And Low Noise Level, The Gold Plated Connectors Ensure Strong And Durable Component Connections, Improve The Signal Transmission, And Allows For Long Cable Life..
Features
- This RCA cable is high performance audio cable designed specifically for use with turntables. It can be running from the turntable back to the preamp for better sound effects. Product upgrade: We have lengthened the ground wire to make it more convenient for you to use.
- This RCA cable is very flexible, doesn't get tangled, and easy to use. It is made of high purity copper and double shileding delivers superior signal transfer and low noise level, the gold plated connectors ensure strong and durable component connections, improve the signal transmission, and allows for long cable life.
- This cable is perfect for use with all turntables requiring a ground wire, and designed to connect a turntable to an amplifier, DJ mixer, or phono preamp, record player and other equipment with 2RCA port.
- Length: 10ft.
- We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don t hesitate to contact us, we will serve you our best.
- See more on Amazon...
Brand: Ullnosoo | Manufacturer: Ullnosoo
See On Amazon #2
Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic
Asin: B07VNPPNRN | Ean: 6411494461729
5-Ft Wire Has Spade Lugs On Each End For Easy Installation..
Features
- Product description No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics. Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: JL | Manufacturer: JL
Weight: 0.04 Pounds
See On Amazon #3
LCYLFH Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic (1 Pack)
Asin: B09Z1R43R3 | Model: LC-202202 | PartNumber: LC-202202
【Durable Material】 Phonograph Turntable Ground Wire Is Made From Durable High Quality Material And Well-Tested By The Manufacturer..
【Easy Installation】 5-Ft Ground Wire Has Spade Lugs On Each End For Easy Installation. Connect One End To The Grounding Lug On The Turntable And The Other End To The Grounding Lug Or Chassis Screw On The Receiver/Amplifier Or Pre-Amplifier, Fits All Domestic And Professional Record Decks..
Features
- No more hum Use the turntable ground wire can eliminates hum and static electricity, no more hum, for magnetic cartridge turntables such as Technics, help you enjoy music.
- Easy Installation 5-ft ground wire has spade lugs on each end for easy installation. Connect one end to the grounding lug on the turntable and the other end to the grounding lug or chassis screw on the receiver/amplifier or pre-amplifier, Fits all domestic and professional record decks.
- Durable Material Phonograph Turntable Ground Wire is made from durable high quality material and well-tested by the manufacturer.
- See more on Amazon...
Brand: LCYLFH | Manufacturer: LCYLFH
Dimensions: 0.50 x 3.50 x 1.20 Inches
See On Amazon #4
5-ft Technic Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables
Asin: B07R15P9DF | Ean: 6469106817440
5-Ft Wire Has Spade Lugs On Each End For Easy Installation..
Features
- Product description No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics. Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: Velodi | Manufacturer: zheng
See On Amazon #5
Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic
Asin: B087JJZPX6 | Model: IE-200 | PartNumber: IE-200 | Ean: 6451355475571
Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
5-Ft Wire Has Spade Lugs On Each End For Easy Installation.Fits All Domestic And Professional Record Decks..
No More Hum - Eliminates Hum And Static Electricity. For Magnetic Cartridge Turntables Such As Technics..
Features
- Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft .
- No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics.
- Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft Wire has spade lugs on each end for easy installation.Fits all domestic and professional record decks.
- See more on Amazon...
Brand: TUAIC | Manufacturer: A-H
Weight: 0.04 Pounds
See On Amazon #6
Pfanstiehl Turntable Ground Wire for LP Vinyl Magnetic Cartridge Turntables, 6-ft Long
Asin: B074ZQ165W | Model: PGW | PartNumber: PGW | Ean: 0038975040844 | UPC: 038975040844
Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
6-Ft Wire Has Spade Lugs On Each End For Easy Installation..
For Magnetic Cartridge Turntables Such As Technics..
Features
- No more hum - Eliminates hum and static electricity.
- For magnetic cartridge turntables such as Technics.
- Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 6-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: TacParts | Manufacturer: LKG Industries
See On Amazon #7
Sam&Johnny Phonograph Turntable Ground Wire for Technics Magnetic Cartridge Turntables SL-BD10, BD20, BD22, BD35,SL-QD33,SL-QD22, Silicone Soft Grounding Wire Cable(5-ft)
Asin: B0BWYXCKV8 | Model: SJ-09008 | PartNumber: SJ-09008 | Ean: 0605182766555 | UPC: 605182766555
✅Use This Plug-In Ground Wire Following Models: For Technics Sl-B92, Sl-B280, Sl-Bd1, Sl-Bd10, Sl-Bd20d, Sl-Bd200, Sl-Bd22, Sl-Bd22d, Sl-Bd35, Sl-Bd3, Sl-D33, Sl-Dd20, Sl-Dd200, Sl-Dd33, Sl-J11, Sl-J300, Sl-J33, Sl-L2, Sl-L20, Sl-L24, Sl-L25, Sl-L26 Etc..
✅1 X 5-Ft Ground Wire Cable. The Replacement Part Is Made From Durable High Quality Material And Well-Tested By The Manufacturer.There Are Three Different Wires Used On The Technics Turntables, So Please Make Sure Your Model Is Listed Below Before Ordering..
✅Perfect Phonograph Grouding Wire, Used It For The Turntable/Preamp/Power Amplifier/Receiver Had A Ground Screw, Turntables Ground Wire Has A 'Spade' Lug Slip Under The "Gnd" Receptacle On Of Your Turntables / Receiver / Amplifier / Vacuum Tubes Amplifier, And The Other End Has A Special Roud Plug That Goes Into The "Gnd" Jack On The Back Of Your Turntable..
✅Phonograph Turntable Ground Wire, 5Ft 18 Awg Flexible Multi-Strand Copper Wire, Manufactured With Ultra-Flexible Power-Flex Cable Has Low Resistance And High Conductivity, Corrosion Resistant, Small Loss, Better Than Original Ground Wire..
Features
- Compatible for Technics Black Turntable Silicone Soft Grounding Wire Cable(5-ft). STOPS hum, Phonograph Turntable Ground Wire Connect the two devices to achieve voltage balance, Ensures optimal sound quality, Protects your equipment from damage.
- Phonograph Turntable Ground Wire, 5ft 18 AWG flexible multi-strand copper wire, manufactured with ultra-flexible Power-Flex Cable has low resistance and high conductivity, Corrosion resistant, small loss, Better than original Ground Wire.
- Use this Plug-in ground Wire following models: for Technics SL-B92, SL-B280, SL-BD1, SL-BD10, SL-BD20D, SL-BD200, SL-BD22, SL-BD22D, SL-BD35, SL-BD3, SL-D33, SL-DD20, SL-DD200, SL-DD33, SL-J11, SL-J300, SL-J33, SL-L2, SL-L20, SL-L24, SL-L25, SL-L26 etc.
- Perfect phonograph grouding wire, Used it for the turntable/preamp/power amplifier/receiver had a ground screw, turntables ground wire has a 'spade' lug slip under the GND receptacle on of your turntables / receiver / amplifier / Vacuum Tubes amplifier, and the other end has a special roud plug that goes into the GND jack on the back of your turntable.
- 1 x 5-ft ground Wire Cable. The replacement part is made from durable high quality material and well-tested by the manufacturer.There are three different wires used on the Technics turntables, So please make sure your model is listed below before ordering.
- See more on Amazon...
Brand: Sam&Johnny | Manufacturer: Sam&Johnny
Warranty: 1 years
See On Amazon #8
Komitasui Phonograph Turntable Ground Wire for Technics SL-BD21 SL-BD3 SL-QL5 SL-6 Magnetic Cartridge Turntables - Stop Hum, 5-ft Technic
Asin: B0CQPFKVQS | Model: For technics ground wire #SFEL026L01E | PartNumber: For technics ground wire #SFEL026L01E | Ean: 0658358679081 | UPC: 658358679081
We Ground Wire Replacement Part Is Manufactured With Ultra-Flexible Power-Flex Cable. The Wire Has Low Resistance And High Conductivity, Corrosion Resistant, Turntable Ground Connector Is Soldered To Wire..
5-Ft (60 Inch) Long, 18 Awg Flexible Multi-Strand Copper Wire For Easy Installation, Please Make Sure Your Technics Black Turntable Grounding Hole Is A Female Sockets. 36 Month Manufacturer Warranty- 100% Satisfaction Guarantee..
We Black Turntable Ground Wire Has A 'U' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Receiver / Amplifier / Pre-Amplifier Or Computer And The Other End Has Round Plug That Goes Into The "Gnd" Receptacle On The Back Of Your Turntable, Better Than Technics Original..
Stop 'Hum Hum' Compatible With Technics Turntable Sl-Bd21 Sl-Bd3 Sl-Ql5 Sl-6 Sl-220 Sl-220A Sl-5 Sl-23K Sl-B35 Sl-D5 Sl-D35 Sl-Q5 Sl-Q6 Sl-Q202 Sl-Q202 Sl-Dl5 Sl-H301 Etc..
Features
- We ground Wire for Technics Black Turntable, Designed for a turntable ground connection that has NO metal pin in the center of the receptacle. Fits Most Technics Vinyl Phonograph.
- Stop 'hum hum' Compatible with Technics Turntable SL-BD21 SL-BD3 SL-QL5 SL-6 SL-220 SL-220A SL-5 SL-23K SL-B35 SL-D5 SL-D35 SL-Q5 SL-Q6 SL-Q202 SL-Q202 SL-DL5 SL-H301 etc.
- We ground Wire replacement part is manufactured with ultra-flexible Power-Flex Cable. The wire has low resistance and high conductivity, corrosion resistant, Turntable ground connector is soldered to wire.
- We black Turntable ground wire has a 'U' lug at one end that can slip under a metal ground/chassis screw on your receiver / amplifier / pre-amplifier or computer and the other end has round plug that goes into the GND receptacle on the back of your turntable, Better than Technics original.
- 5-ft (60 inch) long, 18 AWG flexible multi-strand copper wire for easy installation, please make sure your Technics Black Turntable grounding hole is a female sockets. 36 Month Manufacturer Warranty- 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: KOMITASUI | Manufacturer: Komitasui
See On Amazon #9
Parts Shop Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 6-ft Technic (2 Pack)
Asin: B07SHR6XVW | Ean: 0756557024418 | UPC: 756557024418
6-Ft Wire Has Spade Lugs On Each End For Easy Installation..
A Brand-New, Unused, Unopened, Undamaged Item In Its Original Packaging.
Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
Features
- No more hum - Eliminates hum and static electricity.
- Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 6-ft wire has spade lugs on each end for easy installation.
- A brand-new, unused, unopened, undamaged item in its original packaging
- See more on Amazon...
Brand: XVRTJ | Manufacturer: XVRTJ
See On Amazon #10
Phonograph Turntable Ground Wire, 6ft Phonograph Ground Wire Turntable Grounding Wire Gramophone Ground Wire for Magnetic Cartridge Turntables
Asin: B0CW1TKRBL
Function: Using The Turntable Ground Wire Helps Eliminate Buzz And Static Electricity Generated By The Operation Of The Gramophone Turntable Motor, Making The Gramophone Work Normally..
Wide Usage: Suitable For Home And Professional Record Players, Allowing You To Enjoy Good-Quality Music..
Easy To Install: Connect One End Of The Phonograph Ground Wire To The Ground Lug On The Turntable And Connect The Other End To The Ground Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
Reliable Material: The Phonograph Ground Wire Is Made Of Premium Material, Ensuring Optimal Sound Quality. You Can Use It With Confidence..
Features
- Package Content: You will receive 1 piece of phonograph turntable ground wire, which measures 2m/6ft long.
- Reliable Material: The phonograph ground wire is made of premium material, ensuring optimal sound quality. You can use it with confidence.
- Function: Using the turntable ground wire helps eliminate buzz and static electricity generated by the operation of the gramophone turntable motor, making the gramophone work normally.
- Easy to Install: Connect one end of the phonograph ground wire to the ground lug on the turntable and connect the other end to the ground lug or chassis screw on the receiver / amplifier or pre-amplifier.
- Wide Usage: Suitable for home and professional record players, allowing you to enjoy good-quality music.
- See more on Amazon...
Brand: NQEUEPN | Manufacturer: NQEUEPN
See On Amazon #11
Funayama Turntable Ground Wire Plug-in Magnetic Cartridge Turntables for Technics SL-BD21 SL-BD3 SL-QL5 SL-6 - Stops Hum - Flexible Silicone Soft Grounding Wire - 5Feet
Asin: B0CRGY4FPX | Model: Ground Wire | PartNumber: Ground Wire | Ean: 0658358679159 | UPC: 658358679159
We Ground Wire Is About 5 Feet Long, Turntable Ground Connector Is Soldered To Wire, For Technics Black Turntable Sl-Bd21 Sl-Bd3 Sl-Ql5 Sl-6 Sl-220 Sl-220A Sl-5 Sl-23K Slb-35 Sl-D5 Sl-D35 Sl-Q5 Sl-Q6 Sl-Q202 Sl-Q202 Sl-Dl5 Sl-H301... Not For Technics Sl1200 Series..
We Ground Wire Has A Special Round Plug That Goes Into The "Gnd" Receptacle On The Back Of Your Turntable, Replace For Technics Ground Wire # Sfel026l01e And # Sfdlj20n11 Ground Cable..
We Ground Wire "Innovative Design" Because Our Engineers Have Designed And Refined Many Times A "Spade" Lug To Replace The Bare Or Tinned Wire That Is Connected To The Ground Wire At The Amplifier/Receiver End, Maximizing Contact With The Receiver Chassis Ground Detent..
We Ground Wire Manufactured With Ultra-Flexible Power-Flex Cable, At 18 Awg Flexible Multi-Strand Copper Wire, Low Wire Resistance, Strong Anti-Interference Performance, Can Stops Hum..
Features
- We ground Wire is designed for a turntable ground connection that has NO metal pin in the center of the receptacle. Better than Technics original.
- We ground Wire manufactured with ultra-flexible Power-Flex Cable, at 18 AWG flexible multi-strand copper wire, Low wire resistance, strong anti-interference performance, can Stops Hum.
- We ground Wire is about 5 feet long, Turntable ground connector is soldered to wire, For Technics Black Turntable SL-BD21 SL-BD3 SL-QL5 SL-6 SL-220 SL-220A SL-5 SL-23K SLB-35 SL-D5 SL-D35 SL-Q5 SL-Q6 SL-Q202 SL-Q202 SL-DL5 SL-H301... NOT for Technics SL1200 series.
- We ground Wire innovative design because our engineers have designed and refined many times a spade lug to replace the bare or tinned wire that is connected to the ground wire at the amplifier/receiver end, maximizing contact with the receiver chassis ground detent.
- We ground Wire has a special round plug that goes into the GND receptacle on the back of your turntable, Replace for Technics ground wire # SFEL026L01E and # SFDLJ20N11 ground cable.
- See more on Amazon...
Brand: Funayama | Manufacturer: Funayama
See On Amazon #12
KOMITASUI Phonograph Turntable Ground Wire for Technics SL-BD10, BD20, BD22, BD35 SL-L26, SL-QD22 Plug-in Phono Cable, Silicone Soft Ground Cable(5-ft)
Asin: B0BXT3F4SJ | Model: KMT-5668 | PartNumber: KMT-5668 | Ean: 0605182766616 | UPC: 605182766616
Better Than Technics Original. We Plug-In Ground Wire Silicone Soft Ground Wire. Phono Cable Has Low Resistance And High Conductivity, Corrosion Resistant, Low Resistance, 'Spade' Lug Copper Cold-Pressed Terminals And Tuning Fork Inserted Into Female Sockets, Very Strong Contact, Easy Installation..
1 X 5Ft(60Incl) Phonograph Turntable Ground Wire,12 Month Manufacturer Warranty- 100% Satisfaction Guarantee..
We Ground Wire Has A 'Spade' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Amp/Receiver Or Computer And The Other End Has A Special Roud Plug That Goes Into The "Gnd" Jack On The Back Of Your Turntable..
Stop That Annoying Hum From Your Technics Turntable/Amp/Receiver By Installing This Ground Wire. Compatible For Sl-Bd3, Sl-D33, Sl-Dd20, Sl-Dd33, Sl-J11, Sl-J300, Sl-J33, Sl-L2, Sl-L20, Sl-L24, Sl-L25, Sl-L26, Sl-Qd22, Sl-Qd33, Sl-Qd35, Sl-Dd22, Sl-B92, Sl-B280, Sl-Bd1, Sl-Bd10, Sl-Bd20d, Sl-Bd22, Sl-Bd22d, Sl-Bd35 Etc..
Features
- Phonograph Turntable Ground Wire Connect two devices to achieve voltage balance and Eliminates annoying hum, Ensures optimal sound quality, Protects your equipment from damage.
- STOP that annoying hum from your Technics turntable/amp/receiver by installing this ground wire. Compatible for SL-BD3, SL-D33, SL-DD20, SL-DD33, SL-J11, SL-J300, SL-J33, SL-L2, SL-L20, SL-L24, SL-L25, SL-L26, SL-QD22, SL-QD33, SL-QD35, SL-DD22, SL-B92, SL-B280, SL-BD1, SL-BD10, SL-BD20D, SL-BD22, SL-BD22D, SL-BD35 etc.
- Better than Technics original. We Plug-in ground Wire Silicone Soft Ground Wire. Phono cable has low resistance and high conductivity, corrosion resistant, low resistance, 'spade' lug copper cold-pressed Terminals and Tuning fork inserted into female sockets, Very strong contact, easy installation.
- We ground wire has a 'spade' lug at one end that can slip under a metal ground/chassis screw on your amp/receiver or computer and the other end has a special roud plug that goes into the GND jack on the back of your turntable.
- 1 x 5ft(60incl) Phonograph Turntable Ground Wire,12 Month Manufacturer Warranty- 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: KOMITASUI | Manufacturer: KOMITASUI
Dimensions: 1.10 x 2.90 x 2.45 Inches
Warranty: 3 Years
See On Amazon #13
Sam&Johnny Phonograph Turntable Ground Wire for Technics SL-J3 J2 J1 SL-L3 L2 L1 SL-BD2 SL-QD2, 5-ft DJ Turntable Cartridges Ground Cable
Asin: B0B4HMN4VS | Ean: 0689713727260 | UPC: 689713727260
Compatible For Technics Sl-J1 Sl-J2 Sl-J3 Sl-L1 Sl-L1a Sl-L1b Sl-L2 Sl-L3 Sl-B250 Sl-B92 Sl-B921 Sl-Bd1 Sl-Bd2 Sl-Bd21 Sl-Bd24u Sl-Bd3 Sl-Bd35 Sl-D250 Sl-B250u Sl-D93 Sl-D93u Sl-Dd2 Sl-Dd24u Sl-J92 Sl-L92 Sl-M3 Sl-Qd2 Sl-Qd3 Sl-Qd35 Sl-D250u Etc Ground Wire..
5-Ft (60 Inch) Groud Wire For Easy Installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee..
We Provide A Crimped Forked Spade Lug That Will Maximize Contact With A Receiver Chassis Ground Thumbscrew When Compared To A Bare Or Tinned Wire, Gold-Plated Banana Seat Plug Ensures Good Contact, 18Awg Silicone Soft Multi-Stranded Copper Wire Is Better Than The Original Earth Wire..
Our Grounding Cables Are Designed To Connect Two Pieces Of Equipment To Achieve Voltage Balance And Protect The Equipment From Damage, Suitable For Most Instruments, Musical Instruments And Audio & Video Equipment, Perfect Grounding Cables For Laboratory, Outdoor And Home Appliances, Also Compatible With Technics Sl-L1 Series, Technics Sl-J1 Series Etc Earth Lead Ground Wire..
Features
- STOP annoying hum and static electricity from your Technics turntable by installing this 18 AWG flexible multi-strand copper Banana Plug grounding wire, Improved sound quality and clarity, help you enjoy music.
- Our grounding cables are designed to connect two pieces of equipment to achieve voltage balance and protect the equipment from damage, suitable for most instruments, musical instruments and audio & video equipment, perfect grounding cables for laboratory, outdoor and home appliances, also compatible with Technics SL-L1 series, Technics SL-J1 series etc Earth Lead Ground Wire.
- Compatible for Technics SL-J1 SL-J2 SL-J3 SL-L1 SL-L1A SL-L1B SL-L2 SL-L3 SL-B250 SL-B92 SL-B921 SL-BD1 SL-BD2 SL-BD21 SL-BD24U SL-BD3 SL-BD35 SL-D250 SL-B250U SL-D93 SL-D93U SL-DD2 SL-DD24U SL-J92 SL-L92 SL-M3 SL-QD2 SL-QD3 SL-QD35 SL-D250U etc ground wire.
- We provide a crimped forked spade lug that will maximize contact with a receiver chassis ground thumbscrew when compared to a bare or tinned wire, Gold-plated banana seat plug ensures good contact, 18AWG silicone soft multi-stranded copper wire is better than the original earth wire.
- 5-ft (60 inch) groud wire for easy installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: Sam&Johnny | Manufacturer: Sam&Johnny
See On Amazon #14
Phonograph Turntable Ground Wire, OFC Pure Copper Ground Wire Cable, Gold-Plated Spade Plugs for Magnetic Cartridge Turntables, 6 Foot (72 inches) Long Technic
Asin: B0CZX8ZNQ8 | Ean: 0658358679326 | UPC: 658358679326
Soldered Construction - We 24K Gold-Plated Spade Plugs Ground Wire, Hand-Assembled Using Soldered Joints And Heat Shrink Tubing, This Construction Method Results In The Best Possible Ground Connection, Extremely Resistant To Interference And Is Also Exceptionally Durable, Ensuring Many Years Of Reliable Performance.
Widely Compatibility - For Magnetic Cartridge Turntables Such As Technics, Panasonic, Matsushita, Grouding Wire Has Spade Lugs On Each End For Easy Installation.
Professional Cables - We Blue 99.9% Oxygen-Free Copper Silicone Rubber Cable. Our Engineers Have Experimented With The Final Length: 6 Feet (72 Inches), Which Is Compatible With All Current Vinyl Turntables In Terms Of Cable Length, Blue Color, Very Easy To Distinguish Other Wires, Even In Complex Wiring Environments, You Can Easily Find The Ground Wire.
Professional Grounding Wire - Eliminates Hum, Hiss, No More Hum, Eliminate Static Electricity(Esd) Harm To Human Body, Easy Installation, Connect One End To The Grounding Lug On The Turntable And The Other End To The Grounding Lug Or Chassis Screw On The Receiver/Amplifier Or Pre-Amplifier.
Features
- Superior quality - 24K gold-plated oxidation resistance copper Spade Plugs and 99.9% Oxygen-free copper silicone rubber cable, Stops Hum! Designed For Audiophile, help you enjoy music, We are a professional manufacturer of high quality audio cables, and all of our cable engineers have been repeatedly debugged and verified to ensure the best results
- Professional Grounding Wire - Eliminates hum, hiss, no more hum, eliminate static electricity(ESD) harm to human body, easy installation, Connect one end to the grounding lug on the turntable and the other end to the grounding lug or chassis screw on the receiver/amplifier or pre-amplifier
- Soldered Construction - We 24K gold-plated Spade Plugs Ground Wire, Hand-assembled using soldered joints and heat shrink tubing, This construction method results in the best possible Ground connection, extremely resistant to interference and is also exceptionally durable, ensuring many years of reliable performance
- Professional Cables - We Blue 99.9% Oxygen-free copper silicone rubber cable. Our engineers have experimented with the final length: 6 feet (72 inches), which is compatible with all current vinyl turntables in terms of cable length, Blue color, very easy to distinguish other wires, even in complex wiring environments, you can easily find the ground wire
- Widely Compatibility - For magnetic cartridge turntables such as Technics, Panasonic, Matsushita, Grouding wire has spade lugs on each end for easy installation
- See more on Amazon...
Brand: KOOKFJLLZ | Manufacturer: KOOKFJLLZ
Warranty: 2 years
See On Amazon #15
(pack of 2) Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic
Asin: B08F4XWNBZ | Ean: 6411494463112
5-Ft Wire Has Spade Lugs On Each End For Easy Installation..
Features
- Product description No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics. Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: JH | Manufacturer: JH
See On Amazon #16
Ganivsor Turntable Plug-in ground Wire for Technics SL-B280 SL-BD10 BD35 SL-D33 DD33 SL-QD2 QD22 QD33 QD35 SL-J33 SL-L20 L24 L25
Asin: B07W6GMDDT | Ean: 0791324563936 | UPC: 791324563936
The Turntable Pin Must Be At The Center Of The Right Hole.
Fits Models: Sl-B280 Sl-Bd10, Bd35 Sl-D33, Dd33 Sl-Qd2, Qd22, Qd33, Qd35 Sl-J33 Sl-L20, L24, L25.
Features
- plug-in ground wire for Technics Turntable
- fits models: SL-B280 SL-BD10, BD35 SL-D33, DD33 SL-QD2, QD22, QD33, QD35 SL-J33 SL-L20, L24, L25
- The Turntable Pin must be at the center of the right hole
- See more on Amazon...
Brand: Ganivsor | Manufacturer: Gavin parts shop
See On Amazon #17
Komsunma 2-Pack Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, dj Turntable grounding Wire, 5-ft(60in) Soft Silicone grounding Wire
Asin: B0BFWB2NWS | Model: KMS098R9 | PartNumber: KMS098R9 | Ean: 0605182766210 | UPC: 605182766210
[Application]:Eliminate The Electromagnetic Interference Generated By The Operation Of The Phonograph Turntable Motor "Hum Hum "And Static Electricity(Esd),Eliminate Harm To Human Body. U-Shaped M5 Copper Cold-Pressed Terminals Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier/Vacuum Tubes Amplifier Or Pre-Amplifier,Make The Phonograph Work Properly..
[Package]:2 X Phonograph Turntable Ground Wire. If You Are Not Satisfied, Please Contact Us Or Exchange, Refund..
[Guarantee]:Brand New High Quality Ground Wire For Magnetic Cartridge Turntables Such As Technics, Kenwood, Marantz, Philips, Jvc Etc And Most Audio Amplifiers, Connect The Two Devices To Achieve Voltage Balance And Noise Cancellation..
[Specification]:Wire Diameter: 18Awg, 5-Ft(60In) Wire Cable Kit Is Manufactured With Ultra-Flexible Power-Flex Cable.The Wire Cable Has Low Resistance And High Conductivity,Corrosion Resistant, Low Resistance,Small Loss,Heat-Resistant Up To 105℃ Dry,U-Shaped M5 Copper Cold-Pressed Terminals With Heat Shrinkable Tube For Easy Installation And Saves Money..
Features
- [Description]: Black Turntable Plug-in ground Wire, magnetic cartridge turntables such as Technics. Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- [Specification]:Wire diameter: 18AWG, 5-ft(60in) wire cable kit is manufactured with ultra-flexible Power-Flex Cable.The wire cable has low resistance and high conductivity,corrosion resistant, low resistance,small loss,Heat-resistant up to 105 dry,U-shaped M5 copper cold-pressed Terminals with Heat shrinkable tube for easy installation and saves money.
- [Application]:Eliminate the electromagnetic interference generated by the operation of the phonograph turntable motor hum hum and static electricity(ESD),Eliminate harm to human body. U-shaped M5 copper cold-pressed Terminals Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier/Vacuum Tubes amplifier or pre-amplifier,Make the Phonograph work properly.
- [Guarantee]:Brand new high quality ground wire for magnetic cartridge turntables such as Technics, KENWOOD, marantz, philips, JVC etc and most audio amplifiers, connect the two devices to achieve voltage balance and noise cancellation.
- [Package]:2 x Phonograph Turntable Ground Wire. If you are not satisfied, please contact us or exchange, Refund.
- See more on Amazon...
Brand: Komsunma | Manufacturer: Komsunma
Warranty: 1 Years
See On Amazon #18
Sam&Johnny Turntable Ground Wire for Vinyl Record Player, LP Vinyl Magnetic Cartridge Turntables, 5-ft Technic, Oxygen-Free Copper Wire
Asin: B0B4HK85KJ | Model: Ground Wire | PartNumber: Ground Wire | Ean: 0689713727253 | UPC: 689713727253
For Magnetic Cartridge Turntables Such As Technics Sl-1200 Mk2, Sl-1200 Mk3, Sl-1200 Mk5, Sl-1200 M3d, Sl-1200M5g, Sl-1210 Mk2, Sl-1210 Mk3, Sl-1210 Mk5, Sl-1210 M3d, Sl-1210M5g, Sl-1700, Sl-1710, Sl-1800, Sl-1810, Sl-1900, Sl-1910 Series Etc Earth Lead Ground Wire..
5-Ft (60 Inches) Turntable Ground Wire For Easy Installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee..
Turntables Ground Wire Has A 'Spade' Lug Slip Under The "Gnd" Receptacle On Of Your Turntable Or Computer And The Other End 'Spade' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Amp/Receiver. We Ground Wire Is For Many Technics And A Few Other Brands Of Turntables / Receiver / Amplifier / Vacuum Tubes Amplifier, Domestic And Professional Record Decks..
Turntable Plug-In Ground Wire, 5 Ft(60In) 18Awg Wire Cable Is Manufactured With Oxygen-Free Copper Wire, Ground Cable Has Low Resistance And High Conductivity, Corrosion Resistant, Better Than Original Ground Wire..
Features
- STOPS hum, Phonograph Turntable Ground Wire Connect the two devices to achieve voltage balance, Ensures optimal sound quality, Protects your equipment from damage.
- Turntable Plug-in ground Wire, 5 ft(60in) 18AWG wire cable is manufactured with Oxygen-free copper wire, ground cable has low resistance and high conductivity, corrosion resistant, better than original Ground Wire.
- For Magnetic Cartridge Turntables Such as Technics SL-1200 MK2, SL-1200 MK3, SL-1200 MK5, SL-1200 M3D, SL-1200M5G, SL-1210 MK2, SL-1210 MK3, SL-1210 MK5, SL-1210 M3D, SL-1210M5G, SL-1700, SL-1710, SL-1800, SL-1810, SL-1900, SL-1910 series etc Earth Lead Ground Wire.
- Turntables ground wire has a 'spade' lug slip under the GND receptacle on of your turntable or computer and the other end 'spade' lug at one end that can slip under a metal ground/chassis screw on your amp/receiver. we ground wire is for many Technics and a few other brands of turntables / receiver / amplifier / Vacuum Tubes amplifier, domestic and professional record decks.
- 5-ft (60 inches) Turntable Ground Wire for easy installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: Sam&Johnny | Manufacturer: Sam&Johnny
See On Amazon #19
5-ft Technic Phonograph Turntable Ground Wire for Technics SL-J1 J2 J3 SL-L1 L2 L3 SL-QD2 SL-BD2 Magnetic Cartridge Turntables - Stops Hum -
Asin: B0CGVJ5TQ9 | Model: FMY-9805 | PartNumber: FMY-9805 | Ean: 0658358678800 | UPC: 658358678800
Ground Wire Has A 'Spade' Lug At One End That Can Slip Under A Metal Ground / Chassis Screw On Your Amp / Receiver Or Computer And The Other End Has A Special Gold Plated Round Plug That Goes Into The "Gnd" Jack On The Back Of Your Turntable, Connect The Two Devices To Achieve Voltage Balance And Noise Cancellation.
5-Ft Black Ground Wire. Please Feel Free To Contact Us For Any Questions, We Will Give Quick Response Asap..
Turntable Plug-In Ground Wire, 5 Ft(60In) 18Awg Wire Cable Is Manufactured With Oxygen-Free Copper Wire, Ground Cable Has Low Resistance And High Conductivity, Corrosion Resistant.
Stop That Annoying Hum From Your Technics Turntable By Installing We Grounding Wire. We Ground Wire Is To Replace The Ground Wire For Technics Turntables(Panas Onic, Matsushita). Also Fits Other Brand That Have 4.0Mm - 4.5Mm Male Ground Plug, Turntable Ground Connection That Has No Metal Pin In The Center Of The Receptacle.
Features
- Fit For Technics SL-B250 SL-B92 SL-B921 SL-BD1 SL-BD2 SL-BD21, SL-BD24U SL-BD3 SL-BD35 SL-D250 SL-B250U SL-D93 SL-D93U, SL-DD2 SL-DD24U SL-J92 SL-L92 SL-M3, SL-J1 SL-J2 SL-J3 SL-L1 SL-L1A SL-L1B SL-L2 SL-L3, Technics SL-QD2 SL-QD3 SL-QD35 SL-D250U Phonograph Turntable Ground Wire
- STOP that annoying hum from your Technics turntable by installing we grounding wire. We ground wire is to replace the ground wire for Technics turntables(Panas onic, Matsushita). Also Fits Other Brand that have 4.0mm - 4.5mm Male Ground Plug, Turntable ground connection that has NO metal pin in the center of the receptacle
- Ground wire has a 'spade' lug at one end that can slip under a metal ground / chassis screw on your amp / receiver or computer and the other end has a special gold plated round plug that goes into the GND jack on the back of your turntable, connect the two devices to achieve voltage balance and noise cancellation
- Turntable Plug-in ground Wire, 5 ft(60in) 18AWG wire cable is manufactured with Oxygen-free copper wire, ground cable has low resistance and high conductivity, corrosion resistant
- 5-ft black ground wire. Please feel free to contact us for any questions, we will give quick response asap.
- See more on Amazon...
Brand: Funayama | Manufacturer: funayama
See On Amazon
Looking For Something Else?
Search