Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz 80mm ER20 Collet for Engraving Machine
Asin: B07LG233LM | Ean: 0724509859654 | UPC: 724509859654
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.65 Pounds
See On Amazon Similar To Huanyang Water Cooled CNC Spindle
#1
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.03 Pounds
See On Amazon #2
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 Inches | Weight: 2.54 pounds
See On Amazon #3
RATTMMOTOR ER11 Spindle Motor 300W Air-Cooled Spindle Motor 52mm 12-48VDC 12000RPM 400mN.m for DIY CNC Router Engraver Milling Machine
Asin: B08GKK77W8 | Model: RTMER11 | PartNumber: RTMER11 | Ean: 0619191721023 | UPC: 619191721023
Speed: Idling Speed Can Reach 12000Rpm.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Frequency: 0-400Hz； Torque: 400Mn.M.
Diameter: 52Mm; Total Length Of Motor:175Mm.
Features
- Power: 300W; Operating Voltage: 12-48VDC
- Diameter: 52mm; Total length of motor:175mm
- Speed: Idling speed can reach 12000RPM
- Frequency: 0-400Hz Torque: 400mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.05 x 0.01 x 0.00 inches
See On Amazon #4
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 Pounds
See On Amazon #5
RATTMMOTOR CNC Spindle Motor Kit 110V 2.2KW Water Cooled 80mm Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+Mount Clamp+Water Pump+ER20 Collet
Asin: B09VXRGGDW
【2.2Kw Vfd】①Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110Vac, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase. It Provide A Variety Of Fault Protection Functions: Over-Current, Over-Voltage, Under-Voltage, Over-Heat, Overload, Lack Of Equal Real-Time Monitoring And Protection To Ensure Safe Operation..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected With Inverter's Port U, V, W Respectively. Number 4 Is The Ground Wire, No Wiring Is Required..
②Other Fuctions: With Over Torque And Under Torque Detection; With Jump Frequency Control Function, It Can Effectively Suppress Mechanical Resonance And Make The System More Stable And Reliable.It Can Also Avoid The Impact Of Production Due To Instantaneous Power Failure Because Of Instantaneous Power-Down Retention Function. What's More, It Supports Multiple Frequency Settings: Digital Setting, Analog Setting, Pid Setting, Rs485 Communication Setting,Ect..
【2.2Kw Spindle Motor】: ①This Is A 110V-2.2Kw Water-Cooled 15A Φ 80X213mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.02Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
Features
- Package Include : 1 x 2.2KW Water Cooled Spindle Motor 1 x 2.2KW VFD 1 x 80mm Spindle Motor Mount(with 3pcs screws) 1 x 80W Water Pump 1 x 5m Pipe 1 x ER20 Wrench 14 x ER20 Collet 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
- Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 8.39 x 0.00 Inches | Weight: 21.61 Pounds
See On Amazon #6
CNC Spindle Motor Kits, 110V 2.2KW 80mm Air Cooled Spindle CNC Spindle CNC Motor + 2.2KW VFD+ 80mm Clamp Mount + Collet kit ER20+ Drill bits+ Wires for CNC Router Machine
Asin: B0B7759XQJ | Model: ytx-110V-2.2KW air kit | PartNumber: ytx-110V-2.2KW air kit
【Spindle Advantage 】- Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Engraving And Drilling Material :Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Easy And Fast To Assemble 】-The Vfd Had Been Pre-Programmed For Basic Parameters , You Don't Need To Make Extra Setting Up.We Offer Fully Complete Accessories Including Pre-Soldered Aviation Wire With Connector And Power Wire, It Will Take Just 5 Minutes To Install All And Make All Functions Running..
Features
- PACKAGE LIST -1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD + 1pcs 80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+power wire+2pcs wrenches
- EASY AND FAST TO ASSEMBLE -The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
- SPINDLE ADVANTAGE - Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- WIDE APPLICATION -Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #7
RATTMMOTOR 246mm Length Waterproof Spindle Motor CNC 2.2KW Water Cooled Spindle Motor 220V ER20 CNC Router Carved Metal Spindle Motor 24000RPM 80mm 4-Bearings 8A 400Hz for CNC Machine
Asin: B071HYXK9X | Model: RTM-2.2-220V | PartNumber: RTM-2.2-220V | Ean: 0785004503039 | UPC: 785004503039
✅【24000Rpm High Speed】0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
✅【Design Advantages】The Design Of The Dust-Proof Cover On The Front Of The Spindle And The Use Of Stainless Steel Body Can Effectively Prevent Dust, Water And Rust..
✅【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
✅【4Pcs High Quality Bearings】P4 High Speed Bearing, Dynamic Balance, Better Ensure The Accuracy Of The Spindle, Powerful Power, Large Torque, Stable Performance..
✅【Waterproof Spindle】This Is A Waterproof 220V-2.2Kw Water-Cooled 8A Φ 80X246mm Spindle Motor. Frequency Is 400Hz, Precision Tapered Bore 0.01Mm And Runout Off Is Less Than 0.02Mm. It Is Mainly Suitable For Non-Metallic Engraving, Such As Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine..
Features
- How to Wire The Spindle Motor The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- WATERPROOF Spindle This is a waterproof 220V-2.2KW water-cooled 8A 80x246mm spindle motor. Frequency is 400HZ, Precision tapered bore 0.01mm and runout off is less than 0.02mm. It is mainly suitable for non-metallic engraving, such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- 24000RPM High Speed 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- 4pcs High Quality Bearings P4 high speed bearing, dynamic balance, better ensure the accuracy of the spindle, powerful power, large torque, stable performance.
- Design Advantages The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 0.00 x 0.01 x 3.15 inches | Weight: 13.45 Pounds
See On Amazon #8
VEVOR CNC Spindle Motor 2.2KW 3HP Air Cooled Spindle Motor with Four Bearings 220V ER20 Collet Air Cooling Spindle Motor 24000 RPM CNC Spindle 400 Hz for CNC Router Engraving Milling Grind Machine
Asin: B08691H1RJ | Ean: 0700721078349 | UPC: 700721078349
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #9
VFD CNC Spindle Motor Kits 220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm 80mm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe (Factory Direct Sales)
Asin: B078J5CXP3 | Ean: 0724509858589 | UPC: 724509858589
【Package Include】1 X 220V-2.2Kw Vfd, 1 X2.2Kw Φ80mm 24000Rpm Er20 Spindle.1 X 220V-75W Water Pump ,1 X 80Mm Motor Clamp,1 X 5M Horse.
【Warranty】One Year Warranty (The Spindle Is Half A Year).If There Is An Alarm In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Wide Range Of Applications】The Spindle Motor Applied To: Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine, Small Sized Processing Center, High Speed Centrifuge Etc..
【Parameter Settings】All Basic Parameterhave Been Set Up, The Customer Can Directly Connect And Start When Receiving The Product.
Features
- Connection way The package only supports AC 200V-240V 1 or 3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor pin1=U,pin2=V,pin3=W,pin4=ground
- Parameter Settings All basic parameterhave been set up, the customer can directly connect and start when receiving the product
- Package Include 1 x 220V-2.2KW VFD, 1 x2.2KW 80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m horse
- Wide range of applications The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
- Warranty one year warranty (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Dimensions: 9.50 x 171.00 x 17.50 inches | Weight: 21.00 pounds
See On Amazon #10
RATTMMOTOR 2.2KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive Spindle Motor Controller Converter for CNC Router Engraver Milling Machine
Asin: B09VXH18J8 | Model: RTM100-110V2.2 | PartNumber: RTM100-110V2.2
Input Phase: 1 Phase; Output Phase: 3 Phase..
Suitable For 2.2Kw 110V Cnc Air-Cooled Or Water-Cooled Spindle Motor..
Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz..
Features
- Input Voltage: 110V(+/-15%); Output Voltage: 110VAC.
- Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz.
- Input Phase: 1 Phase; Output Phase: 3 Phase.
- Suitable for 2.2KW 110V CNC air-cooled or water-cooled spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #11
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 inches | Weight: 3.68 pounds
See On Amazon #12
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 inches
See On Amazon #13
110V 2.2kw CNC vfd Spindle Package, 110V 2.2KW VFD+110V 2.2KW 80mm ER20 Water Cooled Spindle Motor+110V Water Pump+80mm Clamp +5m Water Pipe
Asin: B0BMV6GYLD | Model: 110v 2.2kw kit | PartNumber: 110v 2.2kw kit
【Package Include】1 X 110V-2.2Kw Vfd, 1 X2.2Kw Φ80mm 24000Rpm Er20 Spindle.1 X 110V-75W Water Pump ,1 X 80Mm Motor Clamp,1 X 5M Horse.
【Warranty】One Year Warranty (The Spindle Is Half A Year).If There Is An Alarm In The Product And You Do Not Know How To Operate, Please Contact The Seller.
【Wide Range Of Applications】The Spindle Motor Applied To: Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine, Small Sized Processing Center, High Speed Centrifuge Etc..
【Parameter Settings】All Basic Parameterhave Been Set Up, The Customer Can Directly Connect And Start When Receiving The Product.
Features
- Connection way The package only supports 110VAC(+/-5%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor pin1=U,pin2=V,pin3=W,pin4=ground
- Parameter Settings All basic parameterhave been set up, the customer can directly connect and start when receiving the product
- Package Include 1 x 110V-2.2KW VFD, 1 x2.2KW 80mm 24000RPM ER20 Spindle.1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m horse
- Wide range of applications The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
- Warranty one year warranty (The spindle is half a year).If there is an alarm in the product and you do not know how to operate, please contact the seller
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Warranty: 1 year warranty for inverter,(artificial damage is not included)
See On Amazon #14
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 inches | Weight: 23.19 pounds
See On Amazon #15
LCRHLCNC 110v Spindle Motor Kit 1.5Kw Square Air Cooled Spindle Motor 24000Rpm 400Hz VFD Variable Frequency Drive 7 pcs ER11 Collets 1-7mm for CNC Router Engraving Milling Machine (1.5KW-110V)
Asin: B0B24Q2WYX
Main Application: Engrave For Wood, Bamboo, Normal Pcb, Pvc, Pmma, Plastic, Duotone Board(Abs)And Etc Nonmetal, Also Can Engrave On Gold, Silver, Copper, Aluminium, Pb Etc Soft Metal Surface Working..
Notice：Don't Need To Set Vfd，Please Use It Directly.
High-Speed Electric Main Bearings Used In All C Class High-Speed Angular Contact Ball Bearings, Axial Pre-Load Feature, Improved Support Stiffness And Live Spindle Grinding Accuracy Under High-Speed Rotation..
Specification Property：Run Out Off: Less Than 0.005Mm,Spindle Speed:0-24000Rpm, Ac Inverters 50/60Hz Single Phase / 3 Phase ，0-400Hz，Inverter Input：Single Phase Or Three Phase，Inverter Inout：Three Phase，Spindle Motor Input：Three Phase，Bearing Is P4 Grade, 2X7005c P4 Dt, 2X7003c P4 Dt, Increase Spindle Life.
Features
- Package include: 1x 110V/1.5KW Square Spindle Motor+1x 1.5KW/110V YL INVERTER+7x ER11 Collets
- Specification property Run out off: less than 0.005mm,spindle speed:0-24000rpm, AC Inverters 50/60hz single phase / 3 phase 0-400Hz Inverter input single phase or Three phase Inverter inout Three phase spindle motor input Three phase Bearing is P4 grade, 2x7005C P4 DT, 2x7003C P4 DT, increase spindle life
- Main Application: engrave for wood, bamboo, normal PCB, PVC, PMMA, plastic, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working.
- High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
- Notice don't need to set VFD please use it directly
- See more on Amazon...
Brand: LCRHLCNC | Manufacturer: Lishui Hengli Automation Technology Co., Ltd
Weight: 5.40 pounds
Warranty: 90days
See On Amazon #16
CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine
Asin: B0BDRNTWJZ | Model: ytx-1.5kw-65-air | PartNumber: ytx-1.5kw-65-air
【Easy And Fast To Assemble 】-We Offer Pre-Soldered Aviation Wire , You Will Take 2 Minutes To Connect Spindle Motor With Vfd..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Engraving And Drilling Material :Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Spindle Advantage 】-It Made Less Noise When Working, Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Average Spindle Motor..
Features
- BASIC INFORMATION -This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm ),Diameter 65mm Voltage: 110V ,Power:1.5KW, Frequency: 400 Hz, Current: 8A , Speed: 5000-24000 RPM, Runout off: less than 0.005 mm. Weight: 2.7kg(5.96lbs)
- SPINDLE ADVANTAGE -It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond average spindle motor.
- EASY AND FAST TO ASSEMBLE -We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
- WIDE APPLICATION -Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #17
RATTMMOTOR CNC Air Cooled Spindle Motor Kit, 2.2KW Spindle Motor 220V ER20 24000RPM+2.2KW VFD 220V Inverter Single to 3 Phase Variable Frequency Drive+80mm Spindle Motor Mount for CNC Router Machine
Asin: B0785QKYT6 | Ean: 0651312401100 | UPC: 651312401100
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 220V 0-50Hz/60Hz. Output：3 Phase 220V 0-400Hz. Communication Control: Rs-485. Vibration: Below 0.5G. Five-Digits Display And Status Indicator Lamp Display Frequency, Current, Revolution, Voltage, Counter, Temperature, Foward Or Reverse Running, Fault, Ect..
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【2.2Kw Spindle Motor】: ①This Is A 220V-2.2Kw Air-Cooled 8A Φ 80X195mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.005 Accuracy And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Motor Only Can Rotate Clockwise But Not Counterclockwise..
Features
- Package Include : 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws)
- 2.2KW Spindle Motor : This is a 220V-2.2KW air-cooled 8A 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 3.15 x 0.01 inches | Weight: 9.10 pounds
See On Amazon #18
Genmitsu Air-Cooled 300W Brush DC Spindle Motor with 0-48V Output Adjustable Switching Power Supply, 52mm Clamp & ER11 Collet, Ideal for CNC Machining
Asin: B0819C92D2 | Model: 101-60-SPM300 | PartNumber: 101-60-SPM300 | Ean: 0816550023099 | UPC: 816550023099
Radial Run Out Of Spindle: 0.01-0.04; Speed: 3000-12000 R/Min (12V-3000R/Min, 24V-6000R/Min, 36V-9000R/Min, 48V-12000R/Min).
Note: If You Would Like To Add It On 3018 Series Cnc Machines, An Extra 52Mm Diameter Motor Mount Is Needed. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0bxrx85wm) Would Be A Great Choice..
The Output Voltage Is Adjustable, The Output Current Is Not Adjustable, And The Output Current Is Determined By The Load..
Install This Spindle Set Into Your Cnc Machines, Then Your Machines Can Easily Engrave Light Metal Or Other Hard-To-Cut Materials..
Features
- Spindle Motor: New chrome-plated Brush DC motor; This spindle comes equipped with air-cooled function, which can work for a long time.
- Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
- Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min, 24V-6000r/min, 36V-9000r/min, 48V-12000r/min)
- The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.
- Note: If you would like to add it on 3018 series CNC machines, an extra 52mm diameter motor mount is needed. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0BXRX85WM) would be a great choice.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Weight: 4.52 Pounds
See On Amazon #19
Daedalus CNC Spindle Motor Kit, 500w, ER16, Brushed
Asin: B09D3TWBB3 | Model: Brushed-500-ER16 | PartNumber: Brushed-500-ER16 | Ean: 0780744714929 | UPC: 780744714929
★Come With Psu, Rheostat, Spindle Clamp, Cable, Butt Terminals And Heat Shrink Tube..
★Cost-Effective, Carbon Brushes Need To Be Replaced Regularly..
★Quiet And Efficient, Smooth Running, Spin Up Fast And Have Minimal Vibration..
★Enough Power For Wood Engraving, Mdf, Plastics, Acrilic, Plexiglass, Foam Board..
Features
- Spindle, 2 Wires-Brushed, 500w, ER16, working voltage 0-100v DC, 0-12000RPM, 2.05"
- Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.
- Come with PSU, Rheostat, Spindle Clamp, Cable, Butt Terminals and Heat shrink tube.
- Quiet and Efficient, Smooth running, Spin up fast and have minimal vibration.
- Cost-effective, Carbon brushes need to be replaced regularly.
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 4.76 x 14.09 x 11.93 inches
See On Amazon
Looking For Something Else?
Search