Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
Asin: B07PRDY6DS | Ean: 0747356629621 | UPC: 747356629621
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Bn 220 Gps Module Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Ask A Question” To Em-Ail Us.
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.87 x 0.79 x 0.79 inches | Weight: 0.01 pounds
See On Amazon Similar To Geekstory BN220 Dual GPS Glonass
#1
DIYmalls BN-220 GPS Module TTL Dual GPS Glonass w/Flash NMEA-0183 9600bps 1Hz for Arduino RC FPV Drone Flight Control
Asin: B086ZK9BT4 | Ean: 0747356637565 | UPC: 747356637565
Bn220 Gps Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But Bn220 Gps Doesn't Have Compass. If You Need Gps With Flash And Compass, Please Check Bn-880 Gps Via "Visit The Diymalls Store".
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Power Up Bn 220 Gps Module The First Time In A New Location, It Always Takes Longer To Find Satillites. This Is Referred To As “Cold Start”. Once You’Ve Done It The First Time, Later When You Restart Bn220 Gps Module, It Will Get A Lock Much Faster..
Features
- When you use it for pi, there is no driver installation needed but you need to install software
- When you power up bn 220 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as cold start . Once you ve done it the first time, later when you restart bn220 GPS module, it will get a lock much faster.
- bn220 gps has flash to save configuration, so you do not need to reset data next time when you use it. But bn220 gps doesn't have compass. If you need gps with flash and compass, please check bn-880 gps via Visit the DIYmalls Store
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.59 x 7.48 x 3.15 inches | Weight: 0.02 pounds
See On Amazon #2
2PCs Beitian BE220 M8N GPS Module Support GPS GLONASS BeiDou for RC Long Range FPV Racing Drone Airplane
Asin: B081YTBNLY | Model: BN-220 | PartNumber: BN-220 | Ean: 0727161343462 | UPC: 727161343462
When It Is Used On Raspberry Pi, It Is Not Necessary To Install The Driver, But The Software Must Be Installed.
If You Have Any Questions, You Can Contact Us At Any Time.
If The Tx Led Indicator Flashes, It Means That The Be220 M8n Gps Module Is Operating Normally, And The Pps Led Indicator Flashes To Indicate That The Gps Module Has Found Your Location.
Note: It Does Not Have A Compass.
Features
- The BE220 M8N GPS module has a flash memory function to save the configuration, which can help you do not need to reset the data next time you use it.
- Note: it does not have a compass
- When it is used on Raspberry Pi, it is not necessary to install the driver, but the software must be installed
- If the TX LED indicator flashes, it means that the BE220 M8N GPS module is operating normally, and the PPS LED indicator flashes to indicate that the GPS module has found your location
- If you have any questions, you can contact us at any time
- See more on Amazon...
Brand: SoloGood | Manufacturer: Beitian
Dimensions: 0.02 x 0.03 x 0.03 Inches
See On Amazon #3
Geekstory DY-180TTL GPS Receiver Module Dual Glonass GPS Navigation Module TTL Level 9600bps with GPS Antenna for Arduino FPV Aircraft,Replace BN-180 GPS
Asin: B0CGQXNW35
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Dy-180Ttl Gps Module, 3 X 4P 1.0Mm Pitch Cable.
This Dy-180Ttl Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Pw Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. Note: Without Pps Output, Only Pps Indicator.
Features
- This DY-180 TTL GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The PW LED flash means gps module output normally. The PPS LED flash means gps module locate your place. Note: without PPS output, only PPS indicator
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This DY-180TTL GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X DY-180TTL GPS Module, 3 X 4P 1.0mm Pitch Cable
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.32 x 2.72 x 1.81 inches
See On Amazon #4
Geekstory USB GPS Module Antenna Supports GPS+GLONASS Beidou Built-in Flash + Waterproof Active GPS Antenna 3V-5V DC, Connectors SMA Male Plug
Asin: B08BBZ8JZ5
Built-In Flash, Free Configuration Product Baud Rate, Output Statement, Output Rate, Second Pulse And Other Parameters.
How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
Gps Antenna Dc Voltage: 3V To 5V，Waterproof Rating: Ip65, Ip67.
Supports Gps+Glonass (Default); Gps+Beidou;Glonass+ Beidou Multiple Modes Built-In Lna Signal Amplifier.
Features
- Video link: https://youtu.be/30qJsynTceY
- Supports GPS+GLONASS (default); GPS+Beidou;GLONASS+ BeiDou multiple modes Built-in LNA signal amplifier
- Built-in Flash, free configuration product baud rate, output statement, output rate, second pulse and other parameters
- GPS Antenna DC Voltage: 3V to 5V Waterproof rating: IP65, IP67
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory
See On Amazon #5
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps with GPS Passive Antenna+CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire,Female to Female for Window
Asin: B0B76DLH3N
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software. The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software. The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #6
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B1877R4K
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #7
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna + CP2102 6 in 1 USB-UART Serial Adapter Module with 4P Dupont Cable Jumper Wire, Female to Female for Windows
Asin: B0B76GCZ1M
This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Cp2102 Serial Adapter Module Compatible With Windows 7/8/10, Linux, Arduino, Nextion Display, Beitian Gps Module, Esp8266 Transceiver Indicator : When The Serial Line To Send Or Receive Data Lines , The Board Will Receive Indicator Lights For Easy Debugging.
6 In 1 Multifunctional Interface Module Supports Usb To Ttl, Usb To 232, Usb To 485, Ttl To 232, Ttl To 485, 232 To 485. Serial Interface Module Cp2102 Usb Ttl 485 232 Mutual Transfer, Before Using The 6 In 1 Multifunctional Interface Module, You Need To Install The Cp2102 Driver.
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable. The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable. The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- 6 in 1 Multifunctional interface module supports USB to TTL, USB to 232, USB to 485, TTL to 232, TTL to 485, 232 to 485. Serial Interface Module CP2102 USB TTL 485 232 Mutual Transfer, Before using the 6 in 1 Multifunctional interface module, you need to install the CP2102 driver
- CP2102 serial adapter module compatible with Windows 7/8/10, Linux, Arduino, nextion display, beitian gps module, ESP8266 Transceiver indicator : When the serial line to send or receive data lines , the board will receive indicator lights for easy debugging
- See more on Amazon...
Brand: Geekstory
See On Amazon #8
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Asin: B0B18G96XK
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
Bn-220 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass..
Features
- 1 PCS BN-220 Dual GPS module + 1 PCS BN 880 GPS module U8 with Flash HMC5883L Compass.
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass.
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #9
Geekstory BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation + BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass
Asin: B0B18BQCV9
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place. This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-880 Is Suitable For Open Source Flight Controller, Not For Flight Control With Scm, Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l..
This Bn-180 Gps Module Can Show Your Speed. When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd, White To Rxd..
Features
- 1 PCS BN-180 GPS Module + 1 PCS BN-220 Dual GPS module
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place. This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- BN-880 is suitable for Open source flight controller, not for flight control with SCM, Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon #10
Geekstory VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver + BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna
Asin: B0B184NL8L
Vk -162 Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place. When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software..
Bn-220 Gps Module Has Flash To Save Configuration, So You Do Not Need To Reset Data Next Time When You Use It. But It Has No Compass. If You Need Gps With Flash And Compass..
Vk-162 Gps Support Windows And Linux System, Not For Android And Ios System. It Is Not Plug And Play For Most Device. You Must Install Driver Before Make It Work..
Features
- 1 PCS VK-162 G-Mouse USB GPS Dongle Navigation Module + 1 PCS BN-220 Dual GPS module
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- VK -162 is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass.
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place. When you use it for Raspberry Pi, there is no driver needed but you need to install software.
- See more on Amazon...
Brand: Geekstory
See On Amazon
Looking For Something Else?
Search