8 Pieces H8 Chucking Reamer Set, Milling Cutter Reamer Cutter Tool Set with Cylindrical Shaft, 3/4/5/6/7/8/9/10 mm,Chucking Machine Reamer for Bore Machining
Asin: B07WFP6RDC | Model: Tangxihxyztif9b3 | PartNumber: Tangxihxyztif9b3 | Ean: 0739551607504 | UPC: 739551607504
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★★★★★Applicable For Reaming To Mould Processing And Handicraft Processing.
★★★★★Processed Surface Of Iron, Steel, Plastic, Wood, Copper, Aluminum And Other Metal Materials.
★★★★★Widely Used For Bore Machining, Installed In Drilling Machine, Milling Machine, Etc.
★★★★★The Machine Reamer With Sharp Cutting-Edge, High Cutting Ability, High Accuracy, Long Life.
Features
- This Reamer Set are Made from high speed steel, high hardness
- The machine reamer with sharp cutting-edge, high cutting ability, high accuracy, long life
- Applicable for reaming to mould processing and handicraft processing
- Widely used for bore machining, installed in drilling machine, milling machine, etc
- Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials
- See more on Amazon...
Brand: Tangxi | Manufacturer: Tangxi
Dimensions: 0.39 x 5.12 x 2.36 inches | Weight: 0.44 Pounds
See On Amazon Similar To 8 Pieces H8 Chucking Reamer
#1
Performance Tool W2967 Tapered Reamer Set with T-Handle and Carbon Steel Contstruction to Align Holes or Remove Burrs from Pipe, Tubes, and More (2-Piece), Black
Asin: B073XVRG74 | Model: W2967 | PartNumber: W2967 | Ean: 0039564012730 | UPC: 039564012730
T-Handle Design For Easy Turning And Sure Handling.
Lifetime Warranty: Each Tool Is Tested Against Industry Standards For Hardness, Torque, Finish, And Usability And Should Last A Lifetime Under Normal Use.
Capacity: 1/8" To 1/2" (3 - 13Mm) And 5/32" To 7/8" (4 - 22Mm).
The Heat Treated #45 High Carbon Steel For Longer Service Life.
Features
- Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- The heat treated #45 high carbon steel for longer service life
- T-handle design for easy turning and sure handling
- Capacity: 1/8 to 1/2 (3 - 13mm) and 5/32 to 7/8 (4 - 22mm)
- LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use
- See more on Amazon...
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 8.65 x 0.90 x 4.25 Inches | Weight: 0.55 pounds
Warranty: lifetime
See On Amazon #2
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
Mriuuod Hand Reamer Tool, Tapered Reamer Set, 3-13mm(1/8''-1/2'') & 5-16mm( "-5/8") Bridge Pin Hole Handle Tapered Reamers 6 Fluted Chamfer Reaming Guitar Woodworker Luthier Tool
Asin: B0CDPVKZS1
Design: With Removable T-Handle, Easy Turning And Sure Handling. It Can Save You The Power To Reaming And Control. Comes In A Transparent Plastic Box, Easy To Carry.
Packing Includes :2 Pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13Mm) Size And 1/5" -5/8 "(5Mm -16Mm) Size, 1 Pieces 6Mm Hacksaw Drill, 1 Pieces Transparent Plastic Box.
Wildly Used: Handle Drilling Tool Is Suitable For Taper Holes On Top Of Planks, Chamfering, Easy Screw Sinking Holes. Also Suitable For Enlarge Bridge Pin Holes Or Other Holes In Guitar..
Function Well: Reamers For Metal Remove Burrs From Cut Pipe, Tubing, And Conduit, And Enlarge And Countersink Holes In Sheet Metal, Plastic, Copper, Softwoods And Other Materials..
Features
- Premium Material: Made of high quality carbon steel with precision cutting edges. sturdy and durable, rust and corrosion resistant, not easy to deform and break.
- Function Well: reamers for metal remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, copper, softwoods and other materials.
- Design: With removable T-handle, easy turning and sure handling. it can save you the power to reaming and control. Comes in a transparent plastic box, Easy to carry
- Wildly Used: Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes. Also suitable for enlarge bridge pin holes or other holes in guitar.
- Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8 -1/2 (3-13mm) size and 1/5 -5/8 (5mm -16mm) size, 1 pieces 6mm Hacksaw Drill, 1 pieces transparent plastic box
- See more on Amazon...
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #4
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
Drill America 5/8" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGTO4 | Model: DWRRBSS5/8 | PartNumber: DWRRBSS5/8 | Ean: 0887861150637 | UPC: 887861150637
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #7
3/4 Bridge Construction Reamer Drill Bit, M2 HSS Taper Chucking Reamer for Steel Alloy Metal Wood Plastic, 1/2" Non-Slip Shank, 5-Spiral Flutes Car Reamer, to Align or Enlarge Holes, 19mm
Asin: B0CFJDM3Z8
Attention To Every Element – Our 3/4" Reamer Bit Leaves No Detail Unattended. With A Round 3-Sided Shank, A Tapered Point, And A Safe Stop Feature, It Ensures A Secure Chuck Grip, Allows Smooth Reaming Of Imperfect Holes, And Enables Effortless Drill Halt Upon Hole Completion..
User Tips: 1. Always Wear Appropriate Safety Gear. 2. Securely Mount The Reamer Drill Bit In The Chuck Of Your Portable Electric Or Pneumatic Tools. 3. Position The Bit In The Predrilled Hole, Gradually Increase Speed, Maintain Pressure, Keep The Tool Steady, And Add Cutting Oil. 4. Reduce Speed Near The Desired Hole Size For A Smooth Finish..
Enhanced Versatility – Our 3/4" Reamer Drill Bit Excels In Tackling Various Materials, Including Steel, Metal, Alloy Aluminum, Brass, Copper, Iron, Nickel, Plastic, And Pvc Pipes. This Wide Compatibility Makes It An Indispensable Tool For Woodworking And Metalworking Projects, Ranging From Bridge Construction And Steel Erection To Automotive Truck Trailer Maintenance..
Designed To Withstand Rigorous Use, Our 3/4" Conduit Reamer Is Meticulously Crafted From M2 High-Speed Steel. Equipped With Five Long Tapped Right-Hand Spiral Flutes Featuring Precisely Ground Edges, It Efficiently Drills Holes And Eliminates Debris, Delivering Unmatched Durability And Prolonged Functionality..
Features
- Seamlessly and Expertly - The bridge reamer, also known as construction reamers, is used to align or enlarge or smooth Predrilled holes to 3/4" and fit precisely before installing bolts or rivets. This heavy-duty 3/4" reamer drill bit is crafted to ensure seamless and expert performance in your projects.
- Designed to withstand rigorous use, our 3/4 conduit reamer is meticulously crafted from M2 high-speed steel. Equipped with five long tapped right-hand spiral flutes featuring precisely ground edges, it efficiently drills holes and eliminates debris, delivering unmatched durability and prolonged functionality.
- Attention to every element Our 3/4 reamer bit leaves no detail unattended. With a round 3-sided shank, a tapered point, and a safe stop feature, it ensures a secure chuck grip, allows smooth reaming of imperfect holes, and enables effortless drill halt upon hole completion.
- Enhanced versatility Our 3/4 reamer drill bit excels in tackling various materials, including steel, metal, alloy aluminum, brass, copper, iron, nickel, plastic, and PVC pipes. This wide compatibility makes it an indispensable tool for woodworking and metalworking projects, ranging from bridge construction and steel erection to automotive truck trailer maintenance.
- User Tips: 1. Always wear appropriate safety gear. 2. Securely mount the reamer drill bit in the chuck of your portable electric or pneumatic tools. 3. Position the bit in the Predrilled Hole, gradually increase speed, maintain pressure, keep the tool steady, and add cutting oil. 4. Reduce speed near the desired hole size for a smooth finish.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #8
Mriuuod Chucking Reamer Set, 1/8" 3/16" 1/4" 5/16" Reamer, H7 Straight Flutes Lathe Machine Reamer, High Speed Steel Round Shank Milling Cutting Tool Reamer for Bore Machining 4pcs
Asin: B0CDPVFFKG
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #9
7 Degree Tapered Ball Joint Reamer, High-Speed Tool Steel Tapered Reamer Tie Rod for 1-1/2" Per Foot
Asin: B0CJNDSRZ9 | Model: A1243 | PartNumber: A1243
【Premium Quality】Long Life-Span Matters, That Is Why Tapered Reamer Drill Bit Is Composed Of High-Speed Tool Steel, Which Has High Thermal Hardness, High Wear Resistance, High Hardenability , Sufficient Plasticity And Toughness, And Can Withstand Large Impact Forces And High Load Operations..
【12-Month Warranty】 If For Any Reason At All, You Are Not Fully Satisfied With The Taper Reamer, Simply Contact Us Through Amazon Message At Any Time. We Will Provide Comprehensive Quality Assurance For Our Product..
【Universal】: The 1/2" Shank Design Allows For Usage In A Wide Range Of Machines, Making It A Versatile Addition To Any Tool Kit. Tip: You Can Add Some Cutting Oil For Easier Operation..
【Reliable Performance】Taper Joint Reamer Has A Reliable And Stable Performance, And Provides Extra Leverage To Help Keep The Hole Round And Easier To Ream, Which Keep It's Edge Perfect For Ball Joint Socket..
Features
- FUNCTION Our 7 tapered reamer is designed for proper fitting of ball joints to spindles, with a 1-1/2" per foot (7 degree) taper, it precisely reams the joints for a perfect fit to ensure smooth operation of vehicle steering and suspension.
- RELIABLE PERFORMANCE Taper joint reamer has a reliable and stable performance, and provides extra leverage to help keep the hole round and easier to ream, which keep it's edge perfect for ball joint socket.
- PREMIUM QUALITY Long life-span matters, that is why tapered reamer drill bit is composed of high-speed tool steel, which has high thermal hardness, high wear resistance, high hardenability , sufficient plasticity and toughness, and can withstand large impact forces and high load operations.
- UNIVERSAL : The 1/2 shank design allows for usage in a wide range of machines, making it a versatile addition to any tool kit. Tip: You can add some cutting oil for easier operation.
- 12-MONTH WARRANTY If for any reason at all, you are not fully satisfied with the taper reamer, simply contact us through amazon message at any time. We will provide comprehensive quality assurance for our product.
- See more on Amazon...
Brand: Misakomo | Manufacturer: Misakomo
Dimensions: 1.18 x 6.73 x 1.26 Inches | Weight: 0.57 pounds
See On Amazon #10
5PCS M2 HSS Taper Chucking Reamer Set,3/8",1/2",5/8",3/4",1 Reamer Fit 1/2" Round Shank,Bridge/Construction Reamer Drill Bit for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole Reamer
Asin: B0CWRLL4BP | Model: BR-010 | PartNumber: BR-010
Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits,The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be An Existing Hole Or Pilot Hole With A Diameter Smaller Than Our Bridge Steel Reamer Bit Before Use.
Commonly Used In Bridge,Construction,Steel Erection And Automotive Truck Trailer Industries,Our Bridge/Construction Reamer Bit For Steel,Metal,Alloy Aluminum,Brass,Plastic,Iron,Nickel,Copper,Cast Iron Etc.Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools.
The Tapered Point Design Permits The Tapered Reamer For Metal To Enter Into The Overlapping Holes Of Out-Of-Line,Make The Bolt Holes Line Up.Enlarging The Holes In The Steering Knuckles And Pitman Arm.
The Heavy Duty High-Speed Steel Bridge Reamer Is Also Called Construction Reamers,It Used For Aligning An Existing Hole And Enlarging Undersized Hole Prior To Bolt Or Rivet Installation.Our Taper Reamer Bit Aligns And Enlarges Pre-Drilled Holes Ready For Bolting.
Features
- M2 HSS taper chucking reamer 5pcs set including 3/8",1/2",5/8",3/4" and 1 fit 1/2" shank chuck with 5-Spiral Flute. The bridge construction reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to enlarge a hole, you must first have an existing hole and then use our taper reamer to enlarge it
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our taper reamer bit aligns and enlarges pre-drilled holes ready for bolting
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be an existing hole or pilot hole with a diameter smaller than our bridge steel reamer bit before use
- The tapered point design permits the tapered reamer for metal to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our bridge/construction reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools
- See more on Amazon...
Brand: NOVINO | Manufacturer: NOVINO
See On Amazon #11
uxcell Hand Reamer 1/2" High Speed Steel H7 6 Straight Flutes Hand Milling Cutter Tool Reaming Drill Bit for Metal
Asin: B07JPD5GSZ | Model: a18091400ux0327 | PartNumber: a18091400ux0327
Hand Reamer: The Reamer Drill Bit Can Be Hand Operated By Use Of A Wrench, T-Handle Wrench, Extension Rod, Drill Chuck. Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Wide Applications: The Reamer Is Designed To Accurately Enlarge, Smooth Or Finish Holes In Stainless Steel, Cast Iron, Aluminum, Non-Ferrous Metals, Plastic, And Wood, Widely Used In Hole Repair Work, Pipe And Fittings, Woodworking Applications..
Features
- High-speed Steel Reamers: Accuracy: H7; Cutting Diameter: 1/2"; Tool Flute Length: 72mm / 2.83"; Shank Length: 49mm / 1.93"; Overall Length: 136mm / 5.35". Provides durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The reamer is designed to accurately enlarge, smooth or finish holes in stainless steel, cast iron, aluminum, non-ferrous metals, plastic, and wood, widely used in hole repair work, pipe and fittings, woodworking applications.
- Hand Reamer: The reamer drill bit can be hand operated by use of a wrench, T-handle wrench, extension rod, drill chuck. Used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.51 x 0.79 Inches
See On Amazon #12
Drill America 1/2" Bridge/Construction Reamer with 1/2" Shank, DWR Series
Asin: B00FXJGKK2 | Model: DWRRBSS1/2 | PartNumber: DWRRBSS1/2 | Ean: 0887861150613 | UPC: 887861150613
Point Is Tapered To Permit Entry Into Overlapping Holes.
High Speed Steel For Use In A Wide Range Of Materials Such As Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Short Length Facilitates Use In Areas With Limited Access With Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Bridge Reamers Are Used To Align Existing Holes Prior To Bolt Or Rivet Installation.
Features
- Bridge Reamers are also called Construction Reamers
- Bridge reamers are used to align existing holes prior to bolt or rivet installation
- Point is tapered to permit entry into overlapping holes
- Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #13
YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8"-1/2" (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools
Asin: B081W3WZ3W | Ean: 0615200910938 | UPC: 615200910938
Reamer T Handle For Easy Reaming.The Removable Handle Facilitates Compact Storage..
Packing Includes :2 Pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13Mm) Size And 1/5" -5/8 "(5Mm -16Mm) Size.
Material Of Taper Reamers: High Carbon Steel Heat Treatment, Longer Service Life.
The T Reamers Are Precisely Machined Cutting Edges Smooth The Surface Of The Metal Without Effort.
Features
- The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels
- The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort
- Reamer T handle for easy reaming.The removable handle facilitates compact storage.
- Material of Taper Reamers: high carbon steel heat treatment, longer service life
- Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8 -1/2 (3-13mm) size and 1/5 -5/8 (5mm -16mm) size
- See more on Amazon...
Brand: YaeKoo | Manufacturer: Yaemart Corportation
See On Amazon #14
uxcell 1/2" Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
Asin: B091K8T1CY | Model: a20103000ux0057 | PartNumber: a20103000ux0057
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 1/2"; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell Chucking Reamer 8mm, H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Metric Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07K48BR4P | Model: a18092000ux0056 | PartNumber: a18092000ux0056
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 8mm / 0.31"; Tool flute length: 33mm / 1.3"; Overall length: 112mm / 4.41". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 4.72 x 0.79 Inches
See On Amazon #16
Jerax tools 4pcs Bridge/Construction Reamer Set, 3/8", 1/2", 5/8", 3/4 , M2 HSS Taper Chucking Reamer Drill Bit for Steel Alloy Aluminum Metal Wood Plastic, 3/8" or 1/2" Shank, to Enlarge/Align Holes
Asin: B09CTDQ8BN
[Tapered Point]: Allow Entry Into Overlapping Holes..
[Sizes]: 4 Pieces, Including 3/8" (Fit 3/8'' Shank Chuck), 1/2", 5/8" And 3/4" (Fit 1/2'' Shank Chuck)..
[Application]: Enlarge Or Align Existing Holes Through Mild Steel, Alloys, Aluminum, Wood, Plastic, Fiberglass Or Any Similar Hardness Material Prior To Rivet Or Bolt Installation. Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
[Spiral Flutes & Safety Stop]: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability.
- [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability.
- [Tapered point]: allow entry into overlapping holes.
- [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- [Sizes]: 4 pieces, including 3/8 (fit 3/8'' shank chuck), 1/2, 5/8 and 3/4 (fit 1/2'' shank chuck).
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Weight: 1.00 Pounds
See On Amazon #17
Homaisson 4 PCS Taper Reamers, 3/8", 1/2", 5/8", 3/4" M2 HSS Chucking Reamers, Taper Bridge Reamer with 5 Spiral Flutes, Bridge Steel Reamers to Align Existing Hole and Enlarge Hole
Asin: B0C5CHX9RJ | Model: 92104M6JB1 | PartNumber: 92104M6JB1 | Ean: 0752870900972 | UPC: 752870900972
【Enhanced Efficiency With Spiral Flutes】The 5 Left Spiral Flutes Propel Chips Forward, Reducing Friction And Operating Temperature. They Elevate Heat Resistance, Corrosion Resistance, And Rust Prevention. While Keeping Chips Away From The Operator, Ensuring Cleaner And Safer Operations..
【Widely Used Across Various Materials】Suitable For Low-Carbon Steel, Alloys, Aluminum, Wood, Plastics, And Fiberglass, Making This Reamer Set A Staple In Bridge Construction, Steel Manufacturing, Automotive (Trucks And Trailers), And More. Note: Prior To Reaming, Ensure The Presence Of An Existing Hole Or A Pilot Hole Smaller Than The Reamer's Size..
【Secure And Safe Shank Design】Each Shank Features Three Symmetrically Placed Flats, Ensuring A Secure Grip When Used With Portable Electric And Pneumatic Tools. Additionally, The Shank's Top Boasts A Safety Collar Stop That Prevents Over-Penetration And Safeguards Operator Stability, Providing Peace Of Mind During Operation..
【Premium M2 Hss For Efficient Work】Crafted From Hss6542/M2 High-Speed Steel, Enriched With 50% More Tungsten And 150% More Molybdenum Compared To Standard Grades. Boasting A Hardness Of 63-65Hrc, These Reamers Exhibit Exceptional Durability, Ensuring Sharpness And Swift Cutting Action..
Features
- 4 Tapered Reamers Made Precise Holes Set of 4 taper reamers with sizes 3/8", 1/2", 5/8", and 3/4", catering to various machining needs. The tapered point design allows them to effortlessly enter into the out-of-line overlapping holes and line them up, or enlarge the holes in the steering knuckles and pitman arms, ensuring a smooth installation of bolts or rivets.
- Premium M2 HSS for Efficient Work Crafted from HSS6542/M2 high-speed steel, enriched with 50% more tungsten and 150% more molybdenum compared to standard grades. Boasting a hardness of 63-65HRC, these reamers exhibit exceptional durability, ensuring sharpness and swift cutting action.
- Enhanced Efficiency with Spiral Flutes The 5 left spiral flutes propel chips forward, reducing friction and operating temperature. They elevate heat resistance, corrosion resistance, and rust prevention. while keeping chips away from the operator, ensuring cleaner and safer operations.
- Secure and Safe Shank Design Each shank features three symmetrically placed flats, ensuring a secure grip when used with portable electric and pneumatic tools. Additionally, the shank's top boasts a safety collar stop that prevents over-penetration and safeguards operator stability, providing peace of mind during operation.
- Widely Used Across Various Materials Suitable for low-carbon steel, alloys, aluminum, wood, plastics, and fiberglass, making this reamer set a staple in bridge construction, steel manufacturing, automotive (trucks and trailers), and more. Note: Prior to reaming, ensure the presence of an existing hole or a pilot hole smaller than the reamer's size.
- See more on Amazon...
Brand: Homaisson | Manufacturer: Homaisson
Weight: 0.57 pounds
See On Amazon #18
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
Accusize Industrial Tools 29 Pc 1/16'' to 1/2'' by 1/64'' H.S.S. Chucking Reamer Set, Straight Flute, Right Hand Cut, 5500-SF00
Asin: B00HQMXL38 | Model: 5500-SF00 | PartNumber: 5500-SF00 | Ean: 0663566007748, 0641799805454 | UPC: 663566007748, 641799805454
Precision-Ground With Decimal Equivalents From 0.0625" To 0.5000", Catering To Tight Tolerance Requirements..
Designed For Use In Lathes, Drill Presses, And Milling Machines, Enhancing Tool Longevity And Machining Accuracy..
Flute Lengths Vary From 1/2" To 2", With Overall Lengths Between 2-1/2" To 8", Providing Versatility Across Operations..
Straight Flute Design And Right-Hand Cut Orientation Ensure Smooth, Precise Cuts And Excellent Surface Finish..
Features
- Comprehensive set of 29 H.S.S. chucking reamers, sizes range from 1/16" to 1/2" by 1/64" increments for diverse applications; straight shank, straight flute, right-hand cut.
- Straight flute design and right-hand cut orientation ensure smooth, precise cuts and excellent surface finish.
- Precision-ground with decimal equivalents from 0.0625 to 0.5000, catering to tight tolerance requirements.
- Flute lengths vary from 1/2 to 2, with overall lengths between 2-1/2 to 8, providing versatility across operations.
- Designed for use in lathes, drill presses, and milling machines, enhancing tool longevity and machining accuracy.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 inches | Weight: 2.45 Kilograms
See On Amazon #20
uxcell Chucking Reamer 1/4", H8 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07QLK1P91 | Model: a19032000ux0762 | PartNumber: a19032000ux0762
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 1/4"; Tool flute length: 26mm / 1.02"; Overall length: 92mm / 3.62". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search