Official Upgrade Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover 3 and 0.4mm Nozzle 3 for Creality Ender 3 V2 Ender 3 Ender 3 pro 3D Printer, Not for Ender 5
Asin: B07XM637F5
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste ..
Capricorn Ptfe Tubing - About 14 Inch Long. Due To Its High Lubricity And High-Temperature Resistance, It Improves The Printing Quality And Accuracy..
Features
- 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
- Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste .
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon Similar To Official Upgrade Assembled Extruder Hotend
#1
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #3
Creality Ender-3 V3 KE 3D Printer, 500 mm/s High-Speed Printing with Auto-Leveling, Sprite Direct Extruder Supports 300 Printing, Smooth Detail, 220 220 250 mm Print Volume
Asin: B0CVVR6W27 | Model: Ender-3 V3 KE | PartNumber: Ender-3 V3 KE
Ultra-Smooth & Stable Motion: Ender-3 V3 Ke 3D Printer Robust Structure And Precision-Engineered Components Guarantee Smooth And Steady Movements. Upgraded The X-Axis Has A Carriage Slide Containing Ball Bearings, Yielding High-Quality Prints Every Time.
Hassle-Free Printing, User-Friendly: Creality 3D Printers Support Three Ways Of Printing, Phone Control, Wifi, And Usb Drive. Upgraded Easy To Install All-In-One Design, As Well As Filament Shift Sensor And Power Failure Recovery Function To To Save Time And Filament. Ideal 3D Printer Gift For Home, Beginners, Kids.
Precision-Focused Design: With Smart Algorithms Function, It Mitigates The Printer's Vibrations For Minimal Ringing Or Ghosting. Precise 0.1 Mm Printing Accuracy. Also Has Dual Fans For Fast Model Cooling, Making Your Prints Always In Good Shape.
Reliability & Versatile Printing: High Configuration Sprite Direct Extruder, 60W Ceramic Heater, Bi-Metal Heatbreak, And Copper Nozzle Enable 300℃ Printing And Smooth Feeding Of Various Filaments. Ender V3 Ke Can Handle Hyper Pla, Petg, Abs, Tpu(95A) And Asa Filaments.
Features
- Enhanced Faster & Smarter: Creality Ender 3 V3 KE can print at up to 500mm/s speed with 8000mm/s acceleration, lessening your waiting time. The intuitive touch UI screen and real-time model preview make your printing process smoother. Also features a CR Touch sensor for auto leveling, ensures accurate leveling of the build platform
- Reliability & Versatile Printing: High configuration Sprite Direct Extruder, 60W ceramic heater, Bi-metal heatbreak, and copper nozzle enable 300 printing and smooth feeding of various filaments. Ender V3 KE can handle Hyper PLA, PETG, ABS, TPU(95A) and ASA filaments
- Ultra-Smooth & Stable Motion: Ender-3 V3 KE 3d printer robust structure and precision-engineered components guarantee smooth and steady movements. Upgraded the X-axis has a carriage slide containing ball bearings, yielding high-quality prints every time
- Precision-focused Design: With smart algorithms function, it mitigates the printer's vibrations for minimal ringing or ghosting. Precise 0.1 mm Printing Accuracy. Also has dual fans for fast model cooling, making your prints always in good shape
- Hassle-free Printing, User-friendly: Creality 3D printers support three ways of printing, phone control, WiFi, and USB drive. Upgraded easy to install all-in-one design, as well as filament shift sensor and power failure recovery function to to save time and filament. Ideal 3D printer gift for home, beginners, kids
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.84 x 8.66 x 8.66 inches | Weight: 17.20 pounds
Warranty: 1 Years
See On Amazon #4
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #5
ELEGOO Neptune 4 Pro 3D Printer, 500mm/s High Speed FDM Printer with Klipper Firmware, Auto Leveling and Direct Drive Extruder, Easy Assembly, 8.85x8.85x10.43 Inch Printing Size
Asin: B0C749177C | Model: US-EL-3D-N4P | PartNumber: US-EL-3D-N4P
【Segmented Heated Zones】Neptune 4 Pro Has 2 Independent Heating Areas. The Slicing Software Automatically Activates The Peripheral Heating Zone If The Model Exceeds The Central Heating Zone, Reducing Power Consumption And Speeding Up Heating.
【Auto Leveling & High-Temp Nozzle】121-Points Auto Leveling For Quick And Accurate Leveling. With A 300°C High-Temp Nozzle And Extended Hot End, Filament Melts And Extrudes Faster. It's Compatible With Pla, Petg, Abs, Tpu, And Nylon, Making It Versatile For Different Materials.
【Powerful Direct Drive Extruder】Self-Developed Dual-Gear Direct Drive Extruder Boasts A 5.2:1 Reduction Ratio, Providing Powerful Extrusion And Smoother Filament Feeding. Combined With Metal Throat Pipe And Innovative Air Duct Design, It Minimizes The Risk Of Nozzle Clogging.
【Greatly Enhanced Printing Precision】X And Y Axes Upgraded To All-Metal Guide Rails With U-Shaped Steel Wheels For More Precise Movement, Reduced Vibration, Improved Print Quality, And Extended Lifespan. 8.85X8.85X10.43 Inch/225X225x265mm Build Volume.
Features
- 500mm/s Lightning-Fast Speed With Klipper firmware onboard, ELEGOO Neptune 4 pro achieves an astonishing maximum printing speed of 500mm/s with 20000mm/s acceleration. Save you time on your printing tasks! Recommended printing speed is 250mm/s
- Greatly Enhanced Printing Precision X and Y axes upgraded to all-metal guide rails with U-shaped steel wheels for more precise movement, reduced vibration, improved print quality, and extended lifespan. 8.85x8.85x10.43 inch/225x225x265mm build volume
- Segmented Heated Zones Neptune 4 Pro has 2 independent heating areas. The slicing software automatically activates the peripheral heating zone if the model exceeds the central heating zone, reducing power consumption and speeding up heating
- Powerful Direct Drive Extruder Self-developed dual-gear direct drive extruder boasts a 5.2:1 reduction ratio, providing powerful extrusion and smoother filament feeding. Combined with metal throat pipe and innovative air duct design, it minimizes the risk of nozzle clogging
- Auto Leveling & High-Temp Nozzle 121-points auto leveling for quick and accurate leveling. With a 300 C high-temp nozzle and extended hot end, filament melts and extrudes faster. It's compatible with PLA, PETG, ABS, TPU, and nylon, making it versatile for different materials
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 20.30 x 17.50 x 18.70 inches | Weight: 19.60 Pounds
Warranty: 12 months guarantee for main parts of the printer(nozzles and build plate sheet excluded)
See On Amazon #6
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 Pounds
See On Amazon #7
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Creality Official Ender 3 V3 KE Ceramic Hotend Kit, Ender 3 V3 KE Ceramic Heating Block Kit, 300 C High Temperature Resistance Extruder Hot End, All Metal Thermal Conductivity Hotend Replacement
Asin: B0CRDQGR3F
Faster Printing Experience - Ender 3 V3 Ke Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Ke 3D Printer Can Print At Up To 600Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
All-Metal Design - Support 300℃ High Temperature Printing. Compatible With More Filaments, Such As Pla, Abs, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, Etc..
Process Upgrades For Better Printing - The Throat Is Made Of Titanium Alloy, Thin-Walled And Thick Throat, Brings Excellent Heat Insulation Performance. A0.4 High Thermal Conductivity Uniform Heating - Ceramic Heating Ring For Improved Heating Efficiency And Faster Heat Transfer, More Uniform Heating..
Features
- Ender 3 V3 KE Ceramic Hotend Kit - 100% Creality official heating block kit, compatible for Creality Ender 3 V3 KE 3D Printer.
- High Thermal Conductivity Uniform Heating - Ceramic heating ring for improved heating efficiency and faster heat transfer, more uniform heating.
- Faster Printing Experience - Ender 3 V3 KE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 KE 3d printer can print at up to 600mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- Process Upgrades for Better Printing - The throat is made of titanium alloy, thin-walled and thick throat, brings excellent heat insulation performance. a0.4
- All-metal Design - Support 300 high temperature printing. Compatible with more filaments, such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #9
4PCS Official Creality 3D Printer Hotend Silicone Sock Heater Block Silicone Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro/CR-10 10S S4 S5
Asin: B07N18BZQM | Model: CA-GJT | PartNumber: CA-GJT
This Is A Great Replacement For The Easily Worn And Torn Kapton Tape And Heat Resistant Cotton That Come With Any 3D Printers. This Silicone Sock Is Much More Durable And Functional When Compared To Typical Stock Soloutions For Hotend Insulation..
Any Accessories In Our Store Have Been Extensively Tested On All Comgrow Brand Products..
With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints..
Hotend Socks Can Be Used To Quickly Heat The Hotend To A Desired Temperature As The Structure Of The Silicone Inside The Sock Prevents Heat From Escaping Quickly..
Features
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
- With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- Any accessories in our store have been extensively tested on all Comgrow brand products.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.50 x 0.90 x 0.90 inches | Weight: 0.04 pounds
See On Amazon #10
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers Resume Print and Model Preview 8.66*8.66*9.84 inch
Asin: B08BL41ZMY | Model: Ender 3 V2 Neo | PartNumber: Ender 3 V2 Neo | Ean: 8935672542577, 8935672542508, 8935672542539, 0735209618557 | UPC: 735209618557
3.Brand New 4.3 Inch Ui User Interface: The Upgraded Ui Adds A Model Preview Function, Making It Easier To Observe The Printing Shape And Progress For Customers. Which Is Convenient For You To Know About The Model Status. Also, It Supports Nine Languages For Different Customers Demand..
5.Silent Motherboard: The Mainboard Is 4.2.2 Version But It Is Silent Mainboard Which Is Different From Ender 3 Mainboard. This Ender-3 V2 Neo Equipped With Self-Developed Silent Motherboard, Which Has Stronger Anti-Interference, Faster And More Stable Motion Performance, Silent Printing And Low Decibel Operation, Create A Quiet Environment.The Extruder Is Upgraded To Full-Metal Extruder, Which Has Greater Extrusion Force And Is More Durable, Reducing The Risk Of Nozzle Blockage..
4.Pc Spring Steel Magnetic Build Plate: Different From Ender 3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Magnetic Build Plate. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion For Filament, And The Finished Models Can Be Easily Removed By Bending The Print Sheet..
2.Cr Touch Auto Bed Leveling: Upgraded Cr Touch 16-Point Automatic Bed Leveling Technology Saves You In The Trouble Of Manual Leveling. Easy To Use, The Intelligent Leveling System Can Automatically Compensate For The Printing Height Of Different Points Of The Hot Bed. It Saves Much More Time For Customers In Long-Time Leveling Adjustment, Quickly Finish The Leveling Process..
Features
- 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.
- 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
- 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.
- 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel magnetic build plate. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.
- 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.The extruder is upgraded to full-metal extruder, which has greater extrusion force and is more durable, reducing the risk of nozzle blockage.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.58 x 17.24 x 16.70 Inches | Weight: 17.20 pounds
Warranty: 1 year
See On Amazon #11
Creality Ender 3 V3 SE 3D Printer, 250mm/s CR Touch Auto Leveling FDM 3D Printer with Sprite Direct Extruder, Dual Z-axis & Y-axis, Auto-Load Filament, Print Size 8.66x8.66x9.84 inch
Asin: B0CRR1HFZF | Model: Creality Ender 3 V3 SE | PartNumber: Creality Ender 3 V3 SE
🤗 𝐒𝐏𝐑𝐈𝐓𝐄 𝐄𝐗𝐓𝐑𝐔𝐃𝐄𝐑 & 𝟑𝟐-𝐁𝐈𝐓 𝐌𝐀𝐈𝐍𝐁𝐎𝐀𝐑𝐃 - The Market-Proven “Sprite” Direct Drive Extruder Of Ender 3 V3 Se 3D Printer Ensures Smooth And Consistent Feeding Of Pla, Petg, And Also Flexible Tpu, Bringing More Possibilities. The 32-Bit Silent Mainboard Uses An Advanced Stepper Motor Drive To Control All Axes More Precisely For Less Operation Noise..
🤗 𝐄𝐀𝐒𝐘 𝐌𝐎𝐃𝐄𝐋 𝐑𝐄𝐌𝐎𝐕𝐀𝐋 𝐀𝐍𝐃 𝐌𝐎𝐑𝐄 - Ender 3 V3 Se 3D Printer Takes Up Less Space But Brings An Ample Build Volume. The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Thanks To The Power Loss Recovery Function, It Can Resume Printing After An Unexpected Power Failure, Avoiding Filament And Time Waste..
🤗 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 - Creality Provides A 12-Month After-Sales Service For All 3D Printers And A 3-Month Service For Wearing Parts, Such As The Nozzle Kit, Timing Belt Kit, And Build Plate. Feel Free To Contact Us Anytime If You Need!.
🤗 𝐀𝐔𝐓𝐎 𝐅𝐈𝐋𝐀𝐌𝐄𝐍𝐓 𝐋𝐎𝐀𝐃𝐈𝐍𝐆 & 𝐔𝐍𝐋𝐎𝐀𝐃𝐈𝐍𝐆 - Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
🤗 𝐘-𝐀𝐗𝐈𝐒 𝐋𝐈𝐍𝐄𝐀𝐑 𝐒𝐇𝐀𝐅𝐓𝐒 & 𝐃𝐔𝐀𝐋 𝐙-𝐀𝐗𝐈𝐒 - The Rigid Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Which Underpins A Steady And Accurate Motion Of The Build Platform For A Lasting Time..
🤗 𝐂𝐑 𝐓𝐨𝐮𝐜𝐡 𝐀𝐔𝐓𝐎 𝐋𝐄𝐕𝐄𝐋𝐈𝐍𝐆 & 𝐒𝐓𝐑𝐀𝐍𝐈𝐍 𝐒𝐄𝐍𝐒𝐎𝐑 - Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
Note: If You Have Problems With Leveling, Please Check The Following Or Contact Us Directly For Help! First Layer Printing Non-Stick/Laminated Overall Non-Stick/Laminated: A. Clean The Platform Board, Preheat The Nozzle In Advance, Take Out The Consumables, Clean The Nozzle, And Re-Level It. B. You Can Apply Solid Glue On The Platform Plate Before Printing. C. Adjust Z-Axis Compensation According To The Printing Conditions Of The First Layer..
🤗 𝟑 𝐒𝐓𝐄𝐏𝐒 𝐓𝐎 𝐆𝐄𝐓 𝐒𝐓𝐀𝐑𝐓𝐄𝐃 - Creality Ender 3 V3 Se 3D Printer Is Easy To Put Together In 3 Steps. It Uses Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z Offset, Saving The Need For A Calibration Card Or Knob Screws. So Easy To Achieve A Perfect First Layer. Also, You Can Load Or Unload The Filament With One Tap. All Set Within Just 20 Minutes..
Features
- / & - Ender 3 V3 SE 3D printer can print at up to 250mm/s speed with 2500mm/s acceleration, allowing you to complete the models efficiently. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
- - Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps. It uses CR Touch sensor for auto leveling and a strain sensor for auto Z offset, saving the need for a calibration card or knob screws. So easy to achieve a perfect first layer. Also, you can load or unload the filament with one tap. All set within just 20 minutes.
- & - - The market-proven Sprite direct drive extruder of Ender 3 V3 SE 3D printer ensures smooth and consistent feeding of PLA, PETG, and also flexible TPU, bringing more possibilities. The 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
- & - Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- & - Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- - & - - The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- - Ender 3 V3 SE 3D printer takes up less space but brings an ample build volume. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste.
- - - Creality provides a 12-month after-sales service for all 3d printers and a 3-month service for wearing parts, such as the nozzle kit, timing belt kit, and build plate. Feel free to contact us anytime if you need!
- Note: If you have problems with leveling, please check the following or contact us directly for help! First layer printing non-stick/laminated Overall non-stick/laminated: a. Clean the platform board, preheat the nozzle in advance, take out the consumables, clean the nozzle, and re-level it. b. You can apply solid glue on the platform plate before printing. c. Adjust Z-axis compensation according to the printing conditions of the first layer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 19.29 x 13.74 x 14.33 inches | Weight: 19.84 pounds
Warranty: 1 year
See On Amazon #12
Creality Original Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament
Asin: B09NVWJYMT
Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament..
After-Sale Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Strong & Sturdy All Metal Hotend - This Direct Extruder Kit Is All Metal Structure, Durable And Wear Resistant And Integrated Structure Is Convenient For Wiring And Replacing..
Easy Assemble - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Full Extrusion Kit. Come With Longer Connecting Cable, Tools, Accessories And Diagram Instruction, Easy To Assemble..
Features
- 100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments.
- Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble.
- Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
- Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing.
- After-sale Service - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #13
Creality Sprite Extruder Heater Block Kit Extra Thermistors High Temperature Pro 300 , Ender 3 S1 Hotend Compatible with Ender 3 S1 Pro/Ender 3 S1
Asin: B0BTWJ9ZTF | Model: Unido0205 | PartNumber: Unido0205 | Ean: 0783970029294 | UPC: 783970029294
【Extra Thermistors】The Package Includes Two Additional Upgraded Thermistors That Can Withstand Long-Term, High-Temperature Printing Up To 300 ℃, Improving The Stability And Reliability Of The Molding Process..
【Bimetal Heatbreak Throat Tube】Crafted From A Combination Of Tc4 Titanium Alloy And Copper, This Innovative Design Effectively Reduces Upward Heat Transfer (7 W/Mk) While Improving Heat Dissipation (400 W/Mk) For Stable, High-Quality 3D Printing..
【Nickel Copper Plated Nozzle】It Has Smooth Inner Hole And Outer Surface, Which Is More Smooth And Stable For Material Extrusion. It Can Be Applied To All Kinds Of Filament Materials Including Pla/ Tpu/ Petg/ Abs, Etc. The Maximum Working Temperature Is 500°..
【Professional Custom】Sprite Extruder Heater Block Kit Package Has 2 Extra Thermistors, Plated Chrome Copper & Titanium Alloy Throat Tube *1, Heater Block *1, Silicone Sock *1, Nickel-Plated Copper Nozzle *1 Compatible With Ender 3 S1/ Ender 3 S1 Pro/ Cr 10 Smart Pro. (When The Printing Temperature Is To Exceed 300 ℃, You Need To Remove The Silicone Sock In Advance)..
Features
- SPECIAL NOTE Please check the thermistor interface on the machine before purchasing (please see the illustration for details).CREALITY's latest Ender 3 S1 series has changed the thermistor interface, we only apply it to the older Ender 3 S1 series machines, so please check the interface before purchasing.
- Professional Custom Sprite Extruder Heater Block Kit Package has 2 Extra Thermistors, Plated chrome Copper & Titanium Alloy Throat Tube *1, Heater Block *1, Silicone Sock *1, Nickel-Plated Copper Nozzle *1 Compatible with Ender 3 S1/ Ender 3 S1 PRO/ CR 10 Smart Pro. (When the printing temperature is to exceed 300 , you need to remove the silicone sock in advance).
- Extra Thermistors The package includes two additional upgraded thermistors that can withstand long-term, high-temperature printing up to 300 , improving the stability and reliability of the molding process.
- Nickel Copper Plated Nozzle It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of filament materials including PLA/ TPU/ PETG/ ABS, etc. The maximum working temperature is 500 .
- Bimetal Heatbreak Throat Tube Crafted from a combination of TC4 titanium alloy and copper, this innovative design effectively reduces upward heat transfer (7 W/mK) while improving heat dissipation (400 W/mK) for stable, high-quality 3D printing.
- See more on Amazon...
Brand: UNIDO | Manufacturer: Unido
See On Amazon #14
Creality Ender 3 V3 3D Printer, 600mm/s High Speed with All Metal Build, New CoreXZ with Dual-Gear Direct Extruder, 60W 300 Hotend, Auto-Leveling DIY 3D Printers 8.66x8.66x9.84 inch
Asin: B0CT2NW367 | Model: Ender 3 V3 3D Printer | PartNumber: Ender 3 V3 3D Printer
Gear Up For Print Quality: The Z-Axis Adopts Precision Linear Shafts And Timing Belts. No More Layer Shifts Arising From Bent Or Misaligned Lead Screws. Two Model Cooling Fans Are Mounted On The Printhead, Front And Back. Their Strong And Even Wind Boosts Cooling During Printing, Hence Better Printing Quality. The Front Part Cooling Fan And The Hotend Cooling Fan Are Dynamically Balanced. So They Are Less Likely To Wobble, Minimizing Ringing Or Ghosting. This Creality 3D Printer Also Uses A G-Sensor To Measure And Reduce Vibration Resonance..
Keep 3D Printing Easy And Enjoyable: Easy To Assemble In Just Three Steps. When You Need To Calibrate, The Self-Check Function Completes The Auto Leveling, Input Shaping, And More With A Single Tap. Creality Print Includes Rich Presets For Quick Model Slicing. Creality Cloud Supports Cloud Printing And Remote Monitoring, Helping You Keep An Eye On Printing Wherever You Are..
After-Sales Support: Creality Provides A 12-Month After-Sales Service For The Ender 3D Printer And A 3-Month Service For Wearing Parts, Such As The Nozzle Kit, Timing Belt Kits And Build Plates..
First-Class Specs Everywhere: The 3D Printer Is Incredibly Steady And Durable, As The Gantry And Base Are Made Of Aerospace Aluminum Alloy By Integrated Die-Casting. It Displays The Leveling Process, Model Preview, And Temperature Vividly With Motion Graphics. Creality Os Enables Many Advanced Functions Such As Linear Advance And Input Shaping. This Fdm 3D Printer Also Offers An 8G Rom For File Storage And A 4.3" Color Touch Screen For Vivid Display And Intuitive Control..
Top-Notch Direct Drive Extruder: The Direct Extruder Kit Is Enhanced By A Bolster Spring And A Ball Plunger For More Than 1000H Clog-Free Extrusion. The Nozzle And Heatbreak Are Unified As One To Block Heat Creep And Ensure Easy Swap. The Nozzle Is Tipped With Hardened Steel To Confidently Handle Carbon High-Strength Engineering Filaments. Also, A 60W Ceramic Heater Encircles The Hotend, Able This Carbon Fiber 3D Printer To Fully Melt Abs, Petg, Pla-Cf And Other High-Temp Filaments On The Fly..
Features
- XZ for 600mm/s Fast Speed: The Ender 3 V3 3d printer prints 12 times faster than a regular i3-style 3D printer, a new benchmark for bed slingers. The motion system is much lighter and faster with the X and Z motors attached to the base.
- Top-notch Direct Drive Extruder: The direct extruder kit is enhanced by a bolster spring and a ball plunger for more than 1000h clog-free extrusion. The nozzle and heatbreak are unified as one to block heat creep and ensure easy swap. The nozzle is tipped with hardened steel to confidently handle carbon high-strength engineering filaments. Also, a 60W ceramic heater encircles the hotend, able this carbon fiber 3d printer to fully melt ABS, PETG, PLA-CF and other high-temp filaments on the fly.
- Gear Up for Print Quality: The Z-axis adopts precision linear shafts and timing belts. No more layer shifts arising from bent or misaligned lead screws. Two model cooling fans are mounted on the printhead, front and back. Their strong and even wind boosts cooling during printing, hence better printing quality. The front part cooling fan and the hotend cooling fan are dynamically balanced. So they are less likely to wobble, minimizing ringing or ghosting. This creality 3d printer also uses a G-sensor to measure and reduce vibration resonance.
- First-class Specs Everywhere: The 3d printer is incredibly steady and durable, as the gantry and base are made of aerospace aluminum alloy by integrated die-casting. It displays the leveling process, model preview, and temperature vividly with motion graphics. Creality OS enables many advanced functions such as linear advance and input shaping. This fdm 3d printer also offers an 8G ROM for file storage and a 4.3 color touch screen for vivid display and intuitive control.
- Keep 3D Printing Easy and Enjoyable: Easy to assemble in just three steps. When you need to calibrate, the self-check function completes the auto leveling, input shaping, and more with a single tap. Creality Print includes rich presets for quick model slicing. Creality Cloud supports cloud printing and remote monitoring, helping you keep an eye on printing wherever you are.
- After-sales Support: Creality provides a 12-month after-sales service for the ender 3d printer and a 3-month service for wearing parts, such as the nozzle kit, timing belt kits and build plates.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 14.72 x 14.00 x 19.00 inches | Weight: 17.00 pounds
See On Amazon #15
5Aplusreprap Ender 3 Hotend Upgrade - M3 Stud Thermistor,Fast Replaced, Compatible for Creality Ender 3 V2/Pro,CR-10 J-Head Hotend Replacement, Assembled Extruder 3D Printer Hot end Kit 24V 40W
Asin: B09QMBMB6S | Model: HTK-24V50W-1set | PartNumber: HTK-24V50W-1set
Advantages: Heater Wire And Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases. Heated Block Was Staby To The Heatsink With The Titanium Alloy Screw,Which Thermal Conductivity Is Lower Than Stainless Steel Screw, Therefore Less Heat Is Conducted To The Heat Sink..
Tips: It Is Suggested To Re-Check The Heatbed Level After Install The New Hotend Or Nozzle, To Avoid The Nozzle Scratch Heatbed. Screw This Termistor In The Heated Block By Hand, Not By Tool..
Compatible With 3D Printer Models: Creality Cr-10, Creality Cr-10-S5, Creality Cr-10-S4, Creality Cr-10S, Creality Cr-10 Mini, Creality Cr-20, Creality Cr-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Xy X5s, Tevo Tornado, Alfawise U20, Lotmaxx Sc-10, Etc..
Staby Temperature Sensor: Different From Other Hotends, This Hotend Uses An Upgraded M3 Stud Ntc 100K Thermistor, Which Better Keeps The Thermistor Firmly Fixed To The Heated Block While Printhead Is Moving. Thermistor Was Sealed With High Temperature Glue And Insulation With Fiberglass, To Ensure More Effective Temperature Resistance To Prevent Short Circuit At 250℃ Temperature..
Features
- Package Includes: 1 x Ender 3 Hotend, CR10 J-head Hotend kit with M3 stud-in NTC 3950 100K Thermistor and 24v 40w heater wire, 5 x 0.4mm brass nozzle, 3 x ender heated block silicone case, 2 x aluminum heated block, 1 x wrench tool.
- Staby Temperature Sensor: Different from other hotends, this hotend uses an upgraded M3 stud NTC 100K thermistor, which better keeps the thermistor firmly fixed to the heated block while printhead is moving. Thermistor was sealed with high temperature glue and insulation with fiberglass, to ensure more effective temperature resistance to prevent short circuit at 250 temperature.
- Advantages: Heater wire and thermistor wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases. Heated block was staby to the heatsink with the titanium alloy screw,which thermal conductivity is lower than stainless steel screw, therefore less heat is conducted to the heat sink.
- Compatible with 3D Printer Models: Creality CR-10, Creality CR-10-S5, Creality CR-10-S4, Creality CR-10S, Creality CR-10 MINI, Creality CR-20, Creality CR-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc.
- Tips: It is suggested to re-check the heatbed level after install the new hotend or nozzle, to avoid the nozzle scratch heatbed. Screw this termistor in the heated block by hand, not by tool.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 1.20 x 3.50 x 5.20 inches | Weight: 0.28 pounds
See On Amazon #16
Official Creality Upgraded Ender 3 V2 Neo Hotend Kit,Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing for Ender 3 V2 Neo, Ender 3 Max Neo, Ender 3 Neo 3D Printer
Asin: B0BRQF986W | Model: Ender 3 V2 Neo-Hotend Kit | PartNumber: Ender 3 V2 Neo-Hotend Kit
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w.
Nozzle And Heat Break: The Optimised Inner Structure Of Seamless Connection Between Nozzle And Heat Breakage Accelerates The Nozzle To Dissipate Heat, And The Heat Breakage To Insulate, And Releases The Nozzle Blockage.
Upgrade Extruder Assembled Mk8 Hot End Kit With Capricorn Ptfe Bowden Tubing.
The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatible for Creality Ender 3 V2 Neo, Ender 3 Max Neo, Ender 3 Neo 3D printer
- The heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W
- Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing
- Nozzle and heat break: the optimised inner structure of seamless connection between nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Creality Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series
Asin: B092HKZMQM | Model: 001 | PartNumber: 001 | Ean: 0752004597252 | UPC: 752004597252
✔️Improved Performance -- The Optimized Extruder With Metal Extrusion And Original Hot-End Kit Pushes The Filament Into Printer Nozzle, Greatly Making The Red Extruder Retain Powerful In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
✔️Wide Compatibility -- Red Extruder Is Suitable For Creality 3D Printers Accessories: Ender-3 Series, Ender-5 Series, Cr-10S, Cr-10, Cr-10Mini, Cr-10 S5, Cr-10 S4..
✔️Install Easily -- You Just Remove The Old Creality Extruder & Screw And Then Install The New Red Extruder. All The Necessary Accessories Are Included In The Package..
✔️New Upgraded Design -- The Upgraded Red Extruder Has Removed Pneumatic Joint So As To Increase Gear Density, Preventing The Joint Fracture Between Pneumatic Joint And Teflon Tube. What's More, You Can Adjust The Gear Pressure Of Extruder In Time By Adjusting Bolts..
Features
- Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use!
- New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture between pneumatic joint and Teflon tube. What's more, you can adjust the gear pressure of extruder in time by adjusting bolts.
- Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly making the red extruder retain powerful in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are included in the package.
- Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini, CR-10 S5, CR-10 S4.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 6.38 x 0.63 x 3.50 Inches | Weight: 0.13 Pounds
See On Amazon #18
Creality Official Ender 3 V3 SE Hotend Kit, 260 High-Temperature Resistance Hotend Heater Block, 250mm/s High-Speed Assembled Extruder Hot End Kit with Silicone Sock for Ender 3 V3 SE 3D Printer
Asin: B0CKXNZCP4
High Temperature Resistance - Up To 260℃ High Temperature To Accomplish Better Effect Of Printing With High Temperature Filaments. Ender 3 V3 Se Hotend Heater Block Part Is Compatible With Various Filaments Such As Pla, Abs, Petg, Tpu, Pp, Pc, Nylon, Etc..
After-Sales Service - If You Have Any Unsolvable Problems During Installation Or Use Our Ender 3 V3 Se 3D Printer Accessories, Please Feel Free To Tell Us, And Our After-Sales Technical Team Will Provide You With Detail Solutions Within 24 Hours..
Fast Heat Dissipation - The Heat Block And Nozzle Are Made Of Copper Alloy, Effective Isolation Of Heating And Heat Dissipation Reduces Clogging And Improves Print Success Rates, It Is Easy To Install. The Roughness Of Ra0.3 On The Inner Wall Of The Nozzle To Improve Print Quality..
Faster Printing Experience - Ender 3 V3 Se Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Se 3D Printer Can Print At Up To 250Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
Features
- Package List - 100% Original Creality Ender 3 V3 SE hotend kit. The extruder hotend kit include: Ender 3 V3 SE hotend hotend kit*1, Insulation silicone Sleeve*1, and white bowden tube*1.
- Faster Printing Experience - Ender 3 V3 SE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 SE 3d printer can print at up to 250mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- High Temperature Resistance - Up to 260 High Temperature to accomplish better effect of printing with high temperature filaments. Ender 3 V3 SE hotend heater block Part is compatible with various filaments such as PLA, ABS, PETG, TPU, PP, PC, Nylon, etc.
- Fast Heat Dissipation - The heat block and nozzle are made of copper alloy, Effective isolation of heating and heat dissipation reduces clogging and improves print success rates, it is easy to install. The roughness of Ra0.3 on the inner wall of the nozzle to improve print quality.
- After-sales Service - If you have any unsolvable problems during installation or use our Ender 3 V3 SE 3d printer accessories, please feel free to tell us, and our after-sales technical team will provide you with detail solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #19
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Asin: B07H8TSM95 | Model: Ender 3-Extruder | PartNumber: Ender 3-Extruder | Ean: 0608410981676 | UPC: 608410981676
Ender 3 Extruder Hot End Can Work With Different Size Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Tip Of Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kits,White Wire Was Temperature Thermistor, Black Wire Was Heating Tube 24V 40W.
5 Pieces 0.4Mm 3D Printers Nozzles As Gift..
Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
- See more on Amazon...
Brand: RICHOOSE | Manufacturer: Creality 3D
See On Amazon #20
Official Creality Original Ender 3 V2 Full Assembled Hotend Kit, All Assembled Nozzle Kit with Dual Fans and ABS Shell for Ender-3 V2
Asin: B09NKWJ35T | Model: Ender 3 V2 Fully Hotend Kit | PartNumber: Ender 3 V2 Fully Hotend Kit
【Effective Heating And Cooling System】: It Has Heating Block And Heat Sink And Dual Fan For Cooling. The Heating Block With Insulating Silicone Cover Keeps The Temperature Stable And Ensures Even Printing. The Design With Two Fans Makes Heat Dissipation More Even, Solidifies The Model Quickly And Ensures Precise Printing.
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Easy Installation】The Kit Is Assembled Before Delivery, Which Means It's Quite Easy To Install Even If You Are A Beginner Of 3D Printing. You Can According The Video On The Product Page To Install It..
【Integrated Structure】: The Integrated Structure And Simple Wiring Are Convenient For Disassembly, Repair And Assembly. Abs+ Pc Injection Cover Anodised For Robust And More Portable..
Features
- Quality Assurance The fully assembled extruder kit is 100% original and high quality 3D printer accessory for Creality Ender-3 V2.
- Integrated Structure : The integrated structure and simple wiring are convenient for disassembly, repair and assembly. ABS+ PC injection cover anodised for robust and more portable.
- Effective heating and cooling system : It has heating block and heat sink and dual fan for cooling. The heating block with insulating silicone cover keeps the temperature stable and ensures even printing. The design with two fans makes heat dissipation more even, solidifies the model quickly and ensures precise printing
- Easy Installation The kit is assembled before delivery, which means it's quite easy to install even if you are a beginner of 3D printing. You can according the video on the product page to install it.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search