Creality Ender 3 V3 SE 3D Printer, 250mm/s CR Touch Auto Leveling FDM 3D Printer with Sprite Direct Extruder, Dual Z-axis & Y-axis, Auto-Load Filament, Print Size 8.66x8.66x9.84 inch
Asin: B0CRR1HFZF | Model: Creality Ender 3 V3 SE | PartNumber: Creality Ender 3 V3 SE
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🤗 𝐒𝐏𝐑𝐈𝐓𝐄 𝐄𝐗𝐓𝐑𝐔𝐃𝐄𝐑 & 𝟑𝟐-𝐁𝐈𝐓 𝐌𝐀𝐈𝐍𝐁𝐎𝐀𝐑𝐃 - The Market-Proven “Sprite” Direct Drive Extruder Of Ender 3 V3 Se 3D Printer Ensures Smooth And Consistent Feeding Of Pla, Petg, And Also Flexible Tpu, Bringing More Possibilities. The 32-Bit Silent Mainboard Uses An Advanced Stepper Motor Drive To Control All Axes More Precisely For Less Operation Noise..
🤗 𝐄𝐀𝐒𝐘 𝐌𝐎𝐃𝐄𝐋 𝐑𝐄𝐌𝐎𝐕𝐀𝐋 𝐀𝐍𝐃 𝐌𝐎𝐑𝐄 - Ender 3 V3 Se 3D Printer Takes Up Less Space But Brings An Ample Build Volume. The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Thanks To The Power Loss Recovery Function, It Can Resume Printing After An Unexpected Power Failure, Avoiding Filament And Time Waste..
🤗 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐒𝐔𝐏𝐏𝐎𝐑𝐓 - Creality Provides A 12-Month After-Sales Service For All 3D Printers And A 3-Month Service For Wearing Parts, Such As The Nozzle Kit, Timing Belt Kit, And Build Plate. Feel Free To Contact Us Anytime If You Need!.
🤗 𝐀𝐔𝐓𝐎 𝐅𝐈𝐋𝐀𝐌𝐄𝐍𝐓 𝐋𝐎𝐀𝐃𝐈𝐍𝐆 & 𝐔𝐍𝐋𝐎𝐀𝐃𝐈𝐍𝐆 - Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
🤗 𝐘-𝐀𝐗𝐈𝐒 𝐋𝐈𝐍𝐄𝐀𝐑 𝐒𝐇𝐀𝐅𝐓𝐒 & 𝐃𝐔𝐀𝐋 𝐙-𝐀𝐗𝐈𝐒 - The Rigid Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Which Underpins A Steady And Accurate Motion Of The Build Platform For A Lasting Time..
🤗 𝐂𝐑 𝐓𝐨𝐮𝐜𝐡 𝐀𝐔𝐓𝐎 𝐋𝐄𝐕𝐄𝐋𝐈𝐍𝐆 & 𝐒𝐓𝐑𝐀𝐍𝐈𝐍 𝐒𝐄𝐍𝐒𝐎𝐑 - Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
Note: If You Have Problems With Leveling, Please Check The Following Or Contact Us Directly For Help! First Layer Printing Non-Stick/Laminated Overall Non-Stick/Laminated: A. Clean The Platform Board, Preheat The Nozzle In Advance, Take Out The Consumables, Clean The Nozzle, And Re-Level It. B. You Can Apply Solid Glue On The Platform Plate Before Printing. C. Adjust Z-Axis Compensation According To The Printing Conditions Of The First Layer..
🤗 𝟑 𝐒𝐓𝐄𝐏𝐒 𝐓𝐎 𝐆𝐄𝐓 𝐒𝐓𝐀𝐑𝐓𝐄𝐃 - Creality Ender 3 V3 Se 3D Printer Is Easy To Put Together In 3 Steps. It Uses Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z Offset, Saving The Need For A Calibration Card Or Knob Screws. So Easy To Achieve A Perfect First Layer. Also, You Can Load Or Unload The Filament With One Tap. All Set Within Just 20 Minutes..
Features
- / & - Ender 3 V3 SE 3D printer can print at up to 250mm/s speed with 2500mm/s acceleration, allowing you to complete the models efficiently. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance.
- - Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps. It uses CR Touch sensor for auto leveling and a strain sensor for auto Z offset, saving the need for a calibration card or knob screws. So easy to achieve a perfect first layer. Also, you can load or unload the filament with one tap. All set within just 20 minutes.
- & - - The market-proven Sprite direct drive extruder of Ender 3 V3 SE 3D printer ensures smooth and consistent feeding of PLA, PETG, and also flexible TPU, bringing more possibilities. The 32-bit silent mainboard uses an advanced stepper motor drive to control all axes more precisely for less operation noise.
- & - Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- & - Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- - & - - The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- - Ender 3 V3 SE 3D printer takes up less space but brings an ample build volume. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Thanks to the power loss recovery function, it can resume printing after an unexpected power failure, avoiding filament and time waste.
- - - Creality provides a 12-month after-sales service for all 3d printers and a 3-month service for wearing parts, such as the nozzle kit, timing belt kit, and build plate. Feel free to contact us anytime if you need!
- Note: If you have problems with leveling, please check the following or contact us directly for help! First layer printing non-stick/laminated Overall non-stick/laminated: a. Clean the platform board, preheat the nozzle in advance, take out the consumables, clean the nozzle, and re-level it. b. You can apply solid glue on the platform plate before printing. c. Adjust Z-axis compensation according to the printing conditions of the first layer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 19.29 x 13.74 x 14.33 Inches | Weight: 19.84 pounds
Warranty: 1 year
See On Amazon Similar To Creality Ender 3 V3 SE
#1
Creality CR Laser Falcon 5W Laser Engraving Machine Compressed 10000mm/min Laser Spot 0.06mm Stainless Steel DIY Laser Cutter for Wood Acrylic by LaserGrbl Lightburn for Windows MacOS 15.7x16.3 inch
Asin: B09WR8L93B | Model: Ender 3 V3 SE | PartNumber: Ender 3 V3 SE | Ean: 6971636403623, 6971636401148
Brand: Creality
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 20.15 pounds
See On Amazon #2
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 Inches | Weight: 0.66 Pounds
See On Amazon #3
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 Inches | Weight: 15.43 pounds
Warranty: 1 year
See On Amazon #4
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Asin: B098D366R3 | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Filament Dryer And Remove Moisture - Comgrow 3D Printer Filament Dryer Box Is Designed To Keep Filament Dry And Remove Moisture From Kinds Of Filaments. Internal Heating During Printing Provides A Dry Storage Environment For 3D Printer Filaments And Keeps The Filament Dry. Avoid Entanglement, Clogging, Poor Adhesion, And Layer Migration Caused By The Dampness Of The Printing Wire. (Note: Only Used For The Drying Of 3D Printer Filament).
Great Sealed Filament Dry Box -The Outlet Structure Adopts A Silicone Cable Sheath And Teflon Tube, The Outlet Is Smooth And Can Be Covered With A Plug When Not In Use. The Upper Cover Has A Snap Button Structure, And The Sealing Performance Is Good..
How To Set The Filament - Place The Filament Into The Filament Outlet. Please Note That The Direction Is Placed Counterclockwise So That The Pulley At The Bottom Can Feed Better..
Real-Time Monitoring Of Temperature And Humidity - Adjustable Temperature Range 40°~ 50 °C, Setting Time From 6 Hours To 12 Hours. A 2-Inch Lcd Screen And Touch Buttons Make It Easy To Operate, It Is More Comprehensive And Clear Of The Information Display. Press The Power Button To Start, And Hold The Function Button(M) To Change The Dry Time And The Temperature Setting..
Setting Notes - Set The Temperature And Duration After Turning On The Filament Dehydrator. The Machine Will Work Only When The Work State Is Displayed On The Screen. If The Work Mode Is Not Displayed, The Motherboard Will Automatically Shut Down After 3 Minutes. If You Have Any Unsolvable Problems With The Comgrow Filament Dryer Box, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Features
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40 ~ 50 C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
- How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 9.00 x 9.20 x 6.40 Inches | Weight: 3.31 pounds
See On Amazon #5
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Wide Application - The Ender 3 Upgrades Cr Touch Is Compatible With Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5S/Ender 5 Pro And Cr-10 3D Printer. (Note: Our Ender 3 V2 Upgrades Can Only Be Compatible With 32-Bit V4.2.2/V4.2.7 Mainboard 3D Printers).Cr Touch Automatic Bed Leveling Sensor Kit Does Not Fit Skr Mini E3 V3 On Ender 5 Plus.
Easy Installation - 3 Different Kinds Of Mounting Brackets Allow For Installation On Multiple 3D Printers. The Ender 3 Bed Leveling Kit Is Simple In Structure, And It Is Convenient For Printing When Connected. Automatic Compensation Of The Z-Axis So As To Stabilize Print..
After-Sales Service - If You Have Any Unsolvable Problems During Installation Or Use Our Cr Touch Sensor Kit, Please Feel Free To Tell Us, And Our After-Sales Technical Team Will Provide You With Detail Solutions Within 24 Hours..
Durable And Strong Compatibility - The Cr Touch Kit Is Compatible With Pei/Sticker/Glass/Metal Bed. Ender 3 Auto Bed Leveling Kit Works Perfectly With Any Surface, Especially The Design Of The Metal Push Pin Allows For Longer Service Life..
The Firmware Download - According To Your 3D Printer Model, Select A Mounting Bracket To Install It On Your 3D Printer, Then Remove The Z-Axis Limit Switch. Download The Corresponding Firmware From The Creality Official Website And Copy It To The Sd Card. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- The Firmware Download - According to your 3D printer Model, select a mounting bracket to install it on your 3D Printer, then remove the Z-axis limit switch. Download the corresponding firmware from the Creality official website and copy it to the SD card. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct cr touch firmware).
- Wide Application - The Ender 3 upgrades cr touch is compatible with Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5s/Ender 5 Pro and CR-10 3D Printer. (Note: Our ender 3 v2 upgrades can only be compatible with 32-bit V4.2.2/V4.2.7 mainboard 3D Printers).CR Touch Automatic Bed Leveling Sensor Kit does not fit SKR Mini E3 V3 on Ender 5 plus
- Durable and Strong Compatibility - The cr touch kit is compatible with PEI/sticker/glass/metal bed. Ender 3 auto bed leveling kit works perfectly with any surface, especially the design of the metal push pin allows for longer service life.
- Easy Installation - 3 different kinds of mounting brackets allow for installation on multiple 3D printers. The Ender 3 bed leveling kit is simple in structure, and it is convenient for printing when connected. Automatic compensation of the Z-axis so as to stabilize print.
- After-sales Service - If you have any unsolvable problems during installation or use our cr touch sensor kit, please feel free to tell us, and our after-sales technical team will provide you with detail solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 inches | Weight: 0.26 Pounds
See On Amazon #6
Creality Wood Filament PLA, 3D Printer Filament 1.75 mm, Smooth Silk Texture, Toughness, 1kg(2.2lbs)/Spool Printing Filament, for All FDM Printers (Wood)
Asin: B0BZCXM2Q8 | Model: CR-Wood_3301130001_us1 | PartNumber: CR-Wood_3301130001_us1
Environmentally Friendly Materials: Based On The Pla As The Main Material, It Continues The Advantages Of Easy Molding, No Warping And Low Shrinkage Of Pla.
Creality Support: Creality Provides 12-Month & 24 Hours After-Sales Service. Note： Please Place This Product In A Dry And Ventilated Environment, Not In An Environment Of High Temperature, Sunny Or Humid Conditions.
Stable Printing, Low Shrinkage: Stable Performance For Good Creations, Meeting Your Expectations Of High Precision Printings.
Neating Winding, Smooth Feeding: Reduce Filament Waste, Save Time And Improve Printing Success Rate.
Features
- CR-Wood Filament: Exquisite Wood Texture for Unique Property. Premium wood color and clear texture make people feel like being back to nature
- Neating Winding, Smooth Feeding: Reduce filament waste, save time and improve printing success rate
- Environmentally Friendly Materials: Based on the PLA as the main material, it continues the advantages of easy molding, no warping and low shrinkage of PLA
- Stable Printing, Low Shrinkage: Stable performance for good creations, meeting your expectations of high precision printings
- Creality Support: Creality provides 12-month & 24 hours after-sales service. Note Please place this product in a dry and ventilated environment, not in an environment of high temperature, sunny or humid conditions
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 8.27 x 8.27 x 2.76 inches | Weight: 2.20 pounds
Warranty: 1 Year
See On Amazon #7
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 inches | Weight: 22.00 Pounds
Warranty: 8 years manufacturer
See On Amazon #8
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #9
Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235 4mm
Asin: B08XXVWN11 | Model: 6004010007 | PartNumber: 6004010007 | Ean: 0633690247198 | UPC: 633690247198
0.15Mm Of Flatness Recovery Model: This Is The Combination Of Glass And Composite. Due To The Flatness Of Glass And The Uniform Composite Coating Of Surface 'Lattice', The Platform Has Excellent Flatness..
High Hardness And Durable: This Is The Combination Of Chemically Tempered Glass And Surface Composite Coating. The Flatness Of Glass Will Be Much Better And The Composite Coating Of Surface 'Lattice' Will Be Uniform, Which Makes The Platform Have Excellent Flatness..
Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
High Viscosity And Strong Adhesion: Composite Nano Molecule Coating Has High Viscosity After Heating, Which Makes The Model Have Strong Adhesion..
Features
- Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
- See more on Amazon...
First Available: 03/30/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 0.16 x 9.25 x 9.25 inches
Warranty: 2 year manufacturer
See On Amazon #10
Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 inches | Weight: 15.60 Pounds
Warranty: 1 year warranty
See On Amazon
Looking For Something Else?
Search