4Pcs 6.35mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B08334YZ9V | Model: H667*4 | PartNumber: H667*4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Size:Inner Diameter: 6.35Mm,Height:12Mm,Fixed Hole Screw: M3..
Package Included:4Pcs 6.35Mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 X M3 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 6.35mm,Height:12mm,Fixed Hole Screw: M3.
- Package included:4Pcs 6.35mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 x M3 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
Dimensions: 3.15 x 4.72 x 0.50 Inches
See On Amazon Similar To 4Pcs 6.35mm Flange Coupling Connector
#1
4Pcs 6mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B08334N261 | Model: H418*4 | PartNumber: H418*4
Size:Inner Diameter: 6Mm,Height:12Mm,Fixed Hole Screw: M3..
Package Included:4Pcs 6Mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 X M3 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 6mm,Height:12mm,Fixed Hole Screw: M3.
- Package included:4Pcs 6mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 x M3 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #2
uxcell 1/4 inch to 1/4 inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue
Asin: B07P82DDVW
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 1/4 inch to 1/4 inch, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon #3
QCQIANG 5PCS 6mm Flange Coupling, Motor Shaft Coupler, Flanged Shaft Mount, for DIY Handmade Model
Asin: B09TQMKMY6 | Model: LS-240 | PartNumber: LS-240
Package: 5 X 6Mm Flange Shaft Coupling, 10 X M3 Fastening Screw, 20 X M3 Nut, 20 X M3*14 Socket Head Cap Screws, 6 X Hex Wrench.
Use: Suitable For All Kinds Of Diy Handmade Model Accessories.
Features: Easy Installation, Comes With A Wrench For Easy Use.
Size: Inner Diameter: 6Mm.
Features
- Material: Made of high-quality steel with good toughness and corrosion resistance
- Size: Inner Diameter: 6mm
- Package: 5 x 6mm Flange Shaft Coupling, 10 x M3 Fastening Screw, 20 x M3 Nut, 20 x M3*14 Socket head cap screws, 6 x Hex Wrench
- Features: Easy installation, Comes with a wrench for easy use
- Use: Suitable for all kinds of DIY handmade model accessories
- See more on Amazon...
Brand: QCQIANG | Manufacturer: QCQIANG
Dimensions: 0.82 x 2.83 x 2.09 Inches | Weight: 0.11 pounds
See On Amazon #4
Hillman 180210 Coupling Nut, 1/4 - 20, 50-Pack
Asin: B003VFVVHW | Model: 180210 | PartNumber: 180210 | Ean: 0008236073140 | UPC: 008236073140
Similar To Hex Nuts With Extreme Height Measurements Giving Them Length.
Use With Fasteners Of The Same Threading And Finish.
For Industrial Applications.
Used To Make Up Long Rod Assemblies From Shorter Lengths Of Rods.
Features
- Threaded fasteners for joining two male threads, most commonly threaded rod
- Used to make up long rod assemblies from shorter lengths of rods
- Similar to hex nuts with extreme height measurements giving them length
- For industrial applications
- Use with fasteners of the same threading and finish
- See more on Amazon...
Brand: Hillman | Manufacturer: The Hillman Group
Dimensions: 2.10 x 3.10 x 2.90 Inches | Weight: 0.00 pounds
See On Amazon #5
MECCANIXITY 4pcs 6mm Flange Coupling Connector, Shaft Axis Fittings for DIY RC Model Motors, with 8pcs Fastening Screw 2pcs M1.5 Hex Wrench
Asin: B09WJQT3ZC | Model: mea220111ee0457 | PartNumber: mea220111ee0457
Hardened By Heat Treatment And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
All Size Is Measured Manually, Please Allow +/-0.1 Inches Error..
Flange Shaft Coupling Can Fix A Shaft To A Plane, And Can Easily Install Other Accessories On The Shaft. It Is Easy To Install And Replace..
Inner Diameter: 6Mm/0.24 Inch; Total Height: 12Mm/0.47 Inch; Cylinder Outer Diameter: 10Mm/0.39 Inch; Base Plate Diameter: 22Mm/0.86 Inch; Diagonal Screw Hole Distance: 16Mm/0.62 Inch; Base Plate Hole Diameter: 3Mm/0.11 Inch; Material: Iron Plating; Package Content: 4Pcs X Rigid Flange Coupling, 2Pcs X 1.5Mm Mini Hex Wrench, 8Pcs X M3 Fastening Screw..
Features
- Flange Coupling Connector is widely used in model shaft connection and is a great accessory for RC model motors.
- Inner Diameter: 6mm/0.24 inch; Total Height: 12mm/0.47 inch; Cylinder Outer Diameter: 10mm/0.39 inch; Base Plate Diameter: 22mm/0.86 inch; Diagonal Screw Hole Distance: 16mm/0.62 inch; Base Plate Hole Diameter: 3mm/0.11 inch; Material: Iron Plating; Package Content: 4pcs x Rigid Flange Coupling, 2pcs x 1.5mm Mini Hex Wrench, 8pcs x M3 Fastening Screw.
- Hardened by heat treatment and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Flange Shaft Coupling can fix a shaft to a plane, and can easily install other accessories on the shaft. It is easy to install and replace.
- All size is measured manually, please allow +/-0.1 inches error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #6
uxcell 5mm to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Dark Blue
Asin: B08H26NP3T
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 1/4 inch; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
SDTC Tech 1/4 inch Flange Shaft Coupling Metal Axis Bearing Fittings Rigid Coupler for Stepper Motor RC Model (2 Pack)
Asin: B07Q39WZ5K | Model: E-FCOUPLER-6.35-2 | PartNumber: E-FCOUPLER-6.35-2 | Ean: 0743832002766 | UPC: 743832002766
Size: Inner Diameter 1/4 Inch(6.35Mm), Outer Diameter 10Mm, Height 10Mm, Base Diameter 22Mm, Base Height 2Mm, Base Hole Pitch 16Mm, Screw Hole M3 (3Mm)..
Package: 2 X 1/4 Inch Flange Shaft Coupling + 4 X Fastening Screws + 1 X Hex Wrench..
Material: Fine Plating Metal, Durable And Insulation..
Type: Rigid Flange Guide Coupler, Can Fix One Shaft To A Plane For Install Other Parts..
Features
- Flange Shaft Coupling is a perfect accessories for RC Model motor, stepper motor and so on.
- Type: Rigid Flange Guide Coupler, can fix one shaft to a plane for install other parts.
- Size: inner diameter 1/4 inch(6.35mm), outer diameter 10mm, height 10mm, base diameter 22mm, base height 2mm, base hole pitch 16mm, screw hole m3 (3mm).
- Material: fine plating metal, Durable and insulation.
- Package: 2 x 1/4 inch Flange Shaft Coupling + 4 x Fastening Screws + 1 x Hex Wrench.
- See more on Amazon...
Brand: SDTC Tech | Manufacturer: SDTC Tech
See On Amazon #8
Zeberoxyz 2PCS 6.35mm to 8mm Aluminium Plum Flexible Shaft Coupling Diameter20mm Length25mm 6.35x8mm Motor Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 6.35x8mm
Asin: B08QVK3MWH | Model: ZE032-5 | PartNumber: ZE032-5 | Ean: 0191170847356 | UPC: 191170847356
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,Durable,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components, The Coupling Can Be Disassembled And Used In Combination By Itself.
Shaft Coupler Material: Aluminum Alloy, Surface Oxidation Treatment; Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 6.35mm to 8mm / 0.25inch to 0.31inch
- Shaft Coupler Material: Aluminum alloy, Surface oxidation treatment; Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,Durable,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components, The coupling can be disassembled and used in combination by itself
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Zeberoxyz | Manufacturer: Zeberoxyz
See On Amazon #9
uxcell 6.35mm to 10mm Shaft Coupling 30mm Length 25mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder
Asin: B06X9V8QSZ | Model: SYNCE012886 | PartNumber: SYNCE012886
Feature: Set Screws (Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 30X25mm/ 1.18X0.98Inch( L*D).
Features
- Shaft Usage: 6.35mm to 10mm / 0.25 to 0.39 inch
- Material: Aluminum alloy; Size: 30x25mm/ 1.18x0.98inch( L*D)
- Feature: Set screws (Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.18 x 1.18 Inches | Weight: 0.08 pounds
See On Amazon #10
uxcell 6mm to 1/4 Inch Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B08GYQ8W4P
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 6mm to 1/4 inch; Total Length: 25mm/0.98 inch, Outside Diameter : 18mm/0.7 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
2 Pack 6mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 6mm)
Asin: B08223G1XZ | Ean: 0717877040120 | UPC: 717877040120
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
【Package Include】Ancirs Flange Coupler Is Packaged With 2 Pack 6Mm Flange Shaft Coupling + 2X M3 Mini Hex Wrench + 4 X M3 Fastening Screw..
【Standard Specification】Inner Diameter: 6Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Standard Specification Inner Diameter: 6mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- Package Include Ancirs flange coupler is packaged with 2 pack 6mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #12
Small Parts - 41501 Carbon Steel Coupling Nut Black Oxide Finish, 1/4"-20 Threads, Made in US (Pack of 5)
Asin: B003MW0BLQ | Model: 41501 | PartNumber: 41501
The Package Width Is 1.778 Centimeters.
Package Weight : 0.25 Pounds.
The Package Height Is 2.54 Centimeters.
Features
- The package length is 1.778 centimeters
- The package height is 2.54 centimeters
- The package width is 1.778 centimeters
- Package Weight : 0.25 pounds
- See more on Amazon...
Brand: Small Parts | Manufacturer: TE-CO
Dimensions: 4.00 x 4.00 x 6.00 Inches | Weight: 0.13 pounds
See On Amazon #13
uxcell 1/4 Inch to 8mm Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,4pcs
Asin: B08GYCZJ5F
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 8mm; Total Length: 25mm/0.98 inch, Outside Diameter:18mm/0.7 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 1/4 Inch to 1/4 Inch Bore Rigid Coupling Set Screw L25XD20 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,4pcs
Asin: B08H2487GF
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 1/4 inch; Total Length: 25mm/0.98 inch, Outside Diameter: 20mm/0.78 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Rigid Flange Shaft Coupling, Guide Shaft Support Coupler High Hardness Metal Axis Bearing Fittings Motor Connector for DIY Handmade Model (3/4/5/6mm (Mixed), 8)
Asin: B09ZL41GW8 | Model: MHMEL748710 | PartNumber: MHMEL748710
3/4/5/6Mm 4 Kinds Of Specifications, To Meet The Needs Of Multiple Specifications..
Package Includes：2Pcs 3Mm Flange Shaft Coupling, 2Pcs 4Mm Flange Shaft Coupling, 2Pcs 5Mm Flange Shaft Coupling, 2Pcs 6Mm Flange Shaft Coupling, 16 Screws, 4 Pcs Allen Wrench..
Flange Shaft Coupling For Connection Of Model Shaft To Rc Model Motor, Etc..
Size : Total Height 12Mm, Base Size: 22Mm, Fastening Screw Hole: M3, Base Fixing Screw Hole: M3..
Features
- Rigid flange couplings are made of high quality metallic steel. It has high hardness and long durability.
- Size : Total height 12mm, Base Size: 22mm, Fastening Screw Hole: M3, Base Fixing Screw Hole: M3.
- 3/4/5/6mm 4 kinds of specifications, to meet the needs of multiple specifications.
- Flange shaft coupling for connection of model shaft to RC model motor, etc.
- Package includes 2pcs 3mm Flange Shaft Coupling, 2pcs 4mm Flange Shaft Coupling, 2pcs 5mm Flange Shaft Coupling, 2pcs 6mm Flange Shaft Coupling, 16 Screws, 4 pcs Allen Wrench.
- See more on Amazon...
Brand: Hamineler | Manufacturer: Hamineler
See On Amazon #16
uxcell 5mm to 1/4 Inch Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue,4pcs
Asin: B08H87QDDQ
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 5mm to 1/4 inch; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 2pcs 5mm to 6.35mm Shaft Coupling 25mmx40mm Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B09BZB16BX | Model: a21031800ux0417 | PartNumber: a21031800ux0417
Feature: Screw Type(Coiling Clamping);.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Which Simplifies The Debugging Difficulty..
Main Color: Silver.
Material: Aluminum Alloy; Size: 40X25mm/ 1.57X0.98Inch( L*D).
Features
- Shaft Usage: 5mm to 6.35mm / 0.2inch to 0.25inch
- Material: Aluminum alloy; Size: 40x25mm/ 1.57x0.98inch( L*D)
- Feature: Screw Type(Coiling Clamping);
- Main Color: Silver
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, which simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
4 Pack 4mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.
Asin: B07PDYV4P3 | Model: YJ0272MA-AN-M | PartNumber: YJ0272MA-AN-M | Ean: 0717877039261 | UPC: 717877039261
【High Cost Performance】Ancirs Flange Coupler Is Packaged With 4 Pack 4Mm Flange Shaft Coupling + 4X M3 Mini Hex Wrench + 8 X M3 Fastening Screw..
【Satisfaction Guarantee】 If You Are Not Completely Satisfied With Ancirs Flange Coupling Connector, Just Contact Us Through Amazon Message And We Will Provide Feasible Solution For You As Promised..
【Standard Specification】Inner Diameter: 4Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Sturdy Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- High cost performance Ancirs flange coupler is packaged with 4 pack 4mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw.
- Standard Specification Inner Diameter: 4mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Satisfaction Guarantee If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #19
4 Pack 6.35mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors-Silver. (6.35mm)
Asin: B07RKWYWHG | Ean: 0717877039643 | UPC: 717877039643
【High Cost Performance】Ancirs Flange Coupler Is Packaged With 4 Pack 6.35Mm Flange Shaft Coupling + 4X M3 Mini Hex Wrench + 8 X M3 Fastening Screw..
【Satisfaction Guarantee】 If You Are Not Completely Satisfied With Ancirs Flange Coupling Connector, Just Contact Us Through Amazon Message And We Will Provide Feasible Solution For You As Promised..
【Standard Specification】Inner Diameter: 6.35Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- High cost performance Ancirs flange coupler is packaged with 4 pack 6.35mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw.
- Standard Specification Inner Diameter: 6.35mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Satisfaction Guarantee If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #20
Befenybay 2PCS 6.35mm to 8mm Aluminium Plum Flexible Shaft Coupling D20 L25 6.35X8mm Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor 6.35x8mm
Asin: B07T2HFSZR | Model: BE027-fba | PartNumber: BE027-fba | Ean: 0824007309177 | UPC: 824007309177
Super Torque Can Absorb Vibration, Appropriate A Large Torque Transmission.High Hardness,And Excellent Response,Not Easy To Loosen.
The Shaft Couplers Are Mainly Used For Cnc Machines,Servo Motors, Spindle, Step Motor Etc.
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components.
Material: Aluminum Alloy Type: Plum Shaped.
Features
- Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Bore Diameter: 6.35mm to 8mm / 0.25inch to 0.31inch
- Material: Aluminum alloy Type: Plum shaped
- Super torque can absorb vibration, appropriate a large torque transmission.High hardness,and excellent response,not easy to loosen
- Flexibility of coupling shaft removes stress between the motor and driving components
- The shaft couplers are mainly used for CNC machines,servo motors, spindle, step motor etc
- See more on Amazon...
Brand: Befenybay | Manufacturer: befenybay
Weight: 0.07 pounds
See On Amazon
Looking For Something Else?
Search