ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
Asin: B0834W5L3L | Model: 3D-PLA-BKGY | PartNumber: 3D-PLA-BKGY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
【𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 & 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 pounds
See On Amazon Similar To ANYCUBIC PLA 3D Printer Filament
#1
OVERTURE PLA Filament 1.75mm PLA 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer (White 1-Pack)
Asin: B07PGZNM34 | Model: OVPLA175 | PartNumber: OVPLA175 | Ean: 0850006233113 | UPC: 850006233113
【Less Tangle & Hassle】 Our Meticulous Winding And Manual Inspection Guarantees A Tidy, Tangle-Free Filament. Featuring A Larger Inside Diameter, Our Spools Minimize Friction For Smoother Feeding, Ensuring A Hassle-Free Printing Experience.
【Risk-Free & Lifetime Guarantee】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Guarantee. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Most Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Clog-Free & Bubble-Free】 Designed And Manufactured With Our Patented Clog-Free Formula To Guarantee A Smooth And Seamless Printing Experience. All Spools Undergo Thorough Drying For 24 Hours Before Packaging And Are Vacuum-Sealed To Preserve Quality.
Features
- Dimensional Accuracy & Consistency Utilizing CCD cameras and closed-loopcontrols, we continuously monitor and adjust the extrusion process in rea-time.Our advanced technology and meticulous control measures guarantee a filamentdiameter of 1.75mm with a tolerance of +/- 0.02mm
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to guarantee a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed to preserve quality
- Less Tangle & Hassle Our meticulous winding and manual inspection guarantees a tidy, tangle-free filament. Featuring a larger inside diameter, our spools minimize friction for smoother feeding, ensuring a hassle-free printing experience
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with most consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Guarantee Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction guarantee. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Dimensions: 8.23 x 8.78 x 2.95 inches | Weight: 2.20 pounds
Warranty: 2 year
See On Amazon #2
SUNLU PLA 3D Printer Filament PLA Filament 1.75mm, Neatly Wound PLA 3D Printing Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, Fit Most FDM 3D Printers, 1kg Spool (2.2lbs), PLA Black
Asin: B07XG3RM58 | Model: 3Dプリンター フィラメントPLA | PartNumber: 3Dプリンター フィラメントPLA | Ean: 0747045298053 | UPC: 747045298053
③【Pla Filament 1.75 Mm】Sunlu 3D Printer Filament Dimensional Accuracy +/- 0.02Mm. Sunlu Filament Has Wide Compatibility Due To The Small Diameter Error, Making It Suitable For Almost All 1.75Mm Fdm 3D Printers..
⑤【Pla Recommend Settings】To Achieve The Best Printing Results With Sunlu Pla Filament, We Recommend Printing At A Nozzle Temperature Of 200-230°C, A Bed Temperature Of 50-65°C, And A Printing Speed Of 50-100Mm/S..
⑥【Sunlu Main 3D Products】Sunlu Offers A Wide Range Of High-Quality 3D Printing Products, Including 3D Printer Filament, Filament Dryer, Fdm 3D Printer, 3D Pen, 3D Pen Filament, 3D Printer Resin, Lcd 3D Printer, Resin Curing Box, And Other Accessories, Providing You With Everything You Need For A Successful 3D Printing Experience..
④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The Size Of The Sunlu Filament Spool Is Suitable For Hanging On A Lot Of Fdm 3D Printers..
②【Neatly Wound 3D Filament Spool】Sunlu's Self-Developed Neat Winding Device Ensures That The Filament Is Easy To Use, With A 100% Neat Rate That Reduces The Risk Of Tangles And Jams, And Provides A Smoother And More Efficient 3D Printing Experience..
Features
- SUNLU PLA 3D Printer Filament PLA material is the perfect choice for 3D printing enthusiasts! SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. Ideal for beginners and experienced users.
- Neatly Wound 3D Filament Spool SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience.
- PLA Filament 1.75 mm SUNLU 3D printer filament dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.
- Filament Spool Diameter Spool Diameter: 8.00, Spool Width: 2.50, Spool Hub Hole Diameter: 2.20. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- PLA Recommend Settings To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230 C, a bed temperature of 50-65 C, and a printing speed of 50-100mm/s.
- SUNLU Main 3D Products SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLUGW
Weight: 2.21 pounds
See On Amazon #3
Creality 3D Printer Filament, PLA Filament 1.75mm Bundle 2kg for 3D Printing, Ender PLA Filament No-Tangling, Strong Bonding & Overhang Performance, Accuracy +/- 0.02mm (Black & White 2-Pack)
Asin: B0C4TNQZYY | Model: 3301010337 | PartNumber: 3301010337
🤗 𝐋𝐄𝐒𝐒-𝐓𝐀𝐍𝐆𝐋𝐄 & 𝐒𝐓𝐑𝐎𝐍𝐆𝐄𝐑 𝐓𝐎𝐔𝐆𝐇𝐍𝐄𝐒𝐒 - Full Mechanical Winding And Strict Manual Examination, To Make Sure The Line Tidy And Less-Tangle, So As To Avoid Possible Snap And Line Breaking; Larger Spool Inner Diameter Design Makes Feeding Smoother. The Imported Raw Material Upgrades With Stronger Toughness. It Is Not Easy To Break, Meeting Your Demands For Printing Projects Of Functional Parts With Higher Toughnes..
🤗 𝐇𝐈𝐆𝐇 𝐂𝐎𝐌𝐏𝐀𝐓𝐈𝐁𝐈𝐋𝐈𝐓𝐘 &𝟏𝟎𝟎% 𝐄𝐍𝐕𝐈𝐑𝐎𝐍𝐌𝐄𝐍𝐓𝐀𝐋-𝐅𝐑𝐈𝐄𝐍𝐃𝐋𝐘 - Compatible With 99% Fdm & Fff 3D Printers (With Heated Beds) 3D Pen. Environmental Protection, Made From Starch Raw Materials Derived From Renewable Plant Resources..
🤗 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍𝐀𝐋 𝐀𝐂𝐂𝐔𝐑𝐀𝐂𝐘 & 𝐂𝐎𝐍𝐒𝐈𝐒𝐓𝐄𝐍𝐂𝐘 - Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Pla Filaments Of 1.75 Mm Diameter, Dimensional Accuracy + / - .02 Mm; 1Kg/Spool, Total 2Kgs (4.4Lbs)..
🤗 𝐂𝐋𝐎𝐆-𝐅𝐑𝐄𝐄 & 𝐁𝐔𝐁𝐁𝐋𝐄-𝐅𝐑𝐄𝐄 - This 3D Printer Filament Bundle Adopts A Special Patented Design And Manufacturing Process To Ensure A Smooth And Stable Printing Experience For These Pla Filaments. It Is Completely Dried For 24 Hours Before Packaging And Vacuum-Sealed In A Pc Bag With A Desiccant. (Note: Appropriate Temperature Range And Machine Operation Required.).
Features
- - - This 3D printer filament bundle 1.75mm is the most cost-effective filament we release in 2023, the color is classic black and white, you can have 2 spools now just with one spool's money! And you can just print whatever you want. Saving money but not inspirations!
- - & - - This 3D printer filament bundle adopts a special patented design and manufacturing process to ensure a smooth and stable printing experience for these PLA filaments. It is completely dried for 24 hours before packaging and vacuum-sealed in a PC bag with a desiccant. (Note: Appropriate temperature range and machine operation required.)
- - & - Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother. The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughnes.
- & - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .02 mm; 1kg/spool, total 2kgs (4.4lbs).
- & % - - Compatible with 99% FDM & FFF 3D printers (with heated beds) 3D Pen. Environmental protection, made from starch raw materials derived from renewable plant resources.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 5.51 x 8.26 x 8.26 Inches | Weight: 5.68 Pounds
Warranty: 1 year warranty
See On Amazon #4
3Dgenius Silk PLA 3D Printer Filament Triple Color Silk PLA Filament 1.75mm 3D Printing Filament Fit Most FDM Printers, 250g Spool(0.55lbs), 3 in 1 Color Rose Red Sky Blue Green
Asin: B0C9DQ6H8Z
High Dimensional Accuracy: 3Dgenius Pla Filament 1.75Mm Adopts Advanced Ccd Diameter Measuring And Self-Adaptive Control System, Which Guarantees The Diameter Accuracy Of 1.75Mm Pla Filament +/- 0.03 Mm. The Minimum Dimensional Tolerance ±0.03Mm Will Make The Fusion Between The Layers Very Good To Obtain An Even Better Bridging Result..
High Quality & Charming Gloss: 3Dgenius Silk Pla Filament 1.75Mm Have Advantages Of High Purity With Low Shrinkage And Superb Layer Bonding. The Enhanced Toughness Of The 3D Printing Filament Will Bring You More Room For 3D Printing Imagination. The Silk 3D Printer Filament Is Made From Upgraded Pla Raw Materials Which Can Show A Charming Gloss On The Surface Of The Models..
Wide Compatibility & Printing Tips: The Silk Pla Filament Is 250G/0.55Lbs. 3Dgenius 3D Printer Filament Is Compatible Perfectly With Most Fdm 3D Printers That Use 1.75Mm Filament On The Market, Such As Prusa, Makerbot, Mk3, Ender 3 And More. Recommended Extrusion/Nozzle Temperature 190°C - 220°C (374°F - 428°F). Bed/Platform Temperature 50°C - 60°C (122°F - 140°F). Print Speed: 30-60Mm/S..
No Clogging & No Bubble: 3Dgenius Pla 3D Printer Filament Features 100% Vacuumed Package. The Silk Pla Filament Completely Dried For 24 Hours Before Packaging And Then Vacuum Sealed With Desiccants To Effectively Protect The Filament From Moisture, No Stringing And Bubble-Free. 3Dgenius Pla Filament 1.75Mm Will Give You A Smoother And More Stable Printing Experience..
Features
- TRI-COLORS COEXTRUDED FILAMENT: Different from normal or gradient filaments, every inch of this silk PLA filament is made of three colors. You can see three different colors of rose red, sky blue and green at different angles. Three colors are integrated in the silk PLA filament, and multi-color printing can realize three colors in one model. Printing will be full of surprises as different models will present different effects.
- NO CLOGGING & NO BUBBLE: 3Dgenius PLA 3d printer filament features 100% vacuumed package. The silk PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants to effectively protect the filament from moisture, no stringing and bubble-free. 3Dgenius PLA filament 1.75mm will give you a smoother and more stable printing experience.
- HIGH DIMENSIONAL ACCURACY: 3Dgenius PLA filament 1.75mm adopts advanced CCD diameter measuring and self-adaptive control system, which guarantees the diameter accuracy of 1.75mm PLA filament +/- 0.03 mm. The minimum dimensional tolerance 0.03mm will make the fusion between the layers very good to obtain an even better bridging result.
- WIDE COMPATIBILITY & PRINTING TIPS: The silk pla filament is 250g/0.55lbs. 3Dgenius 3d printer Filament is compatible perfectly with most FDM 3D Printers that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3 and more. Recommended Extrusion/Nozzle Temperature 190 C - 220 C (374 F - 428 F). Bed/Platform temperature 50 C - 60 C (122 F - 140 F). Print Speed: 30-60mm/s.
- HIGH QUALITY & CHARMING GLOSS: 3Dgenius silk PLA filament 1.75mm have advantages of high purity with low shrinkage and superb layer bonding. The enhanced toughness of the 3d printing filament will bring you more room for 3D printing imagination. The silk 3d printer filament is made from upgraded PLA raw materials which can show a charming gloss on the surface of the models.
- See more on Amazon...
Brand: 3Dgenius | Manufacturer: 3Dgenius
Weight: 0.72 Pounds
Warranty: 1 year
See On Amazon #5
AMOLEN 3D Printer Filament Bundle, PLA Filament 1.75mm, Dual Color Filament, Silk Red Gold, Silk Red Green, Silk Red Blue, Silk Blue Green, 3D Printing Filament 200gX 4 Spools
Asin: B0931YN8L1 | Model: 3DSKPACK | PartNumber: 3DSKPACK
🧵【High Compatibility】- Our 3D Printer Filament Offers Wide Temperature And Speed Ranges To Suit All Of Your Innovative Needs. Amolen Pla Can Conveniently Be Used On Various Mainstream Printers. Recommended Printing Temperature 200-220°C..
🛡️ 【Hassle Free】- Amolen Is Focused On Innovative And Better Quality Pla Filament.The Defective Filament Can Be Reissued Or Refunded Fully. We Provide Professional 3D Printing Technical Guidance And Good 24/7 Customer Service..
🧵【Vacuum Bag】- Pla Filament Comes In A Vacuum Bag With A Desiccant Bag, Effectively Protecting Your 3D Printing Filament From Moisture And Dust. Pla Silk Filament Is Professionally Wound By The Machine, With No Tangle, Fixed Hole Steady..
🧵【Premium Quality】- Amolen 3D Printer Filament Bundle Pla Offers Smoother Printing Results, No Bubble, No Jamming, No Warping, Melts Well, And Conveys Evenly Without Clogging The Nozzle Or Extruder. 1.75 Pla Filament Consistent Diameter, Dimensional Accuracy Within+/-0.03Mm..
Features
- Dual Color Silk PLA - Without polishing, you can get a gorgeous printing surface. The dual Color combination of magic PLA filament 1.75mm, Make the two sides of your print appear in different colors. Tip: Layer height 0.2mm. Keep the filament vertical without twisting it.
- Premium Quality - AMOLEN 3D Printer Filament bundle PLA offers smoother printing results, no bubble, no jamming, no warping, melts well, and conveys evenly without clogging the nozzle or extruder. 1.75 pla filament consistent diameter, dimensional accuracy within+/-0.03mm.
- High Compatibility - Our 3D Printer Filament offers wide temperature and speed ranges to suit all of your innovative needs. AMOLEN PLA can conveniently be used on various mainstream printers. Recommended printing temperature 200-220 C.
- Vacuum Bag - PLA filament comes in a vacuum bag with a desiccant bag, effectively protecting your 3d printing filament from moisture and dust. PLA silk filament is professionally wound by the machine, with no tangle, fixed hole steady.
- HASSLE FREE - AMOLEN is focused on innovative and better quality PLA filament.The defective filament can be reissued or refunded fully. We provide professional 3D printing technical guidance and good 24/7 customer service.
- See more on Amazon...
Brand: AMOLEN | Manufacturer: AMOLEN
Weight: 2.20 pounds
See On Amazon #6
SUNLU 250g PLA Filament 1.75mm Bundle,3D Printer Filament Bundle Multicolor, Neatly Wound PLA Filament, Individually Vacuum Packed,250g Spool,8 Rolls,Black+White+Grey+Transparent+Red+Blue+Orange+Green
Asin: B09TR9FXBL | Model: 1.75 PLA Filament | PartNumber: 1.75 PLA Filament
③【Neatly Wound Filament 】Sunlu Has A Professional Production Line With Strict Control Of Neatly Lined Up Lines To Avoid Knots During Printing.Completely Mechanical Wire Winding And Strict Manual Checks To Ensure Neat Lines With Few Kinks, Avoiding Possible Breaks..
⑤【Sunlu 250G Spool Diameter】Spool Diameter: 120Mm(4.7Inches), Spool Width: 43Mm(1.69Inches), Spool Hub Hole Diameter: 42Mm(1.65Inches). 250G Spool Size Of The Sunlu Filament Spool Is Suitable For Hanging On A Lot Of Fdm 3D Printers..
⑥【High Compatiblity & Vacuum Pack Pla Filament】Compatible With 99% Fdm 3D Printers (With Heated Beds) And 3D Pen.Vacuum Packed Neatly Arranged Sunlu Pla Filament, Provide Better Printing Result.Environmental Protection, 250G Pla Filament Is Made From Starch Raw Materials Derived From Renewable Plant Resources..
④【High Precision +/- 0.02Mm Tolerance Pla Filament】1.75Mm Pla 3D Filament(Tolerance Level : ± 0.02Mm).0.25Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance,Approximately 68M Of Pla Filament On Each Spool Ease Of Use,Minimal Warping,No Clogging,No Bubbles. Increase Your 3D Printing Objects Delicacy..
②【Pla Filament Recommend Settings】 Sunlu Premium Pla Filament Offer The Advantage Of Incredible Ease Of 3D Printing. Sunlu Pla Filament 1.75Mm ,Optimized Print Quality,High Purity With Low Shrinkage And Superb Interlayer Adhesion. Recommended Sunlu Pla Filament Print Nozzle Temperature 200-210℃, Hot Bed Temp: 50°C-65°C, Print Speed: 50-100Mm/S..
Features
- SUNLU PLA 3D Printer Filament Bundle 2kg in Total, 8 Spools of 250g SUNLU 1.75mm PLA filament. Multiple Color Choices, 8 colours: Black+White+Grey+Transparent+Red+Blue+Orange+Green. Multiple colors satisfy your rich 3d printing creativity.
- PLA Filament Recommend Settings SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing. SUNLU PLA filament 1.75mm ,optimized print quality,high purity with low shrinkage and superb interlayer adhesion. Recommended SUNLU PLA filament Print nozzle temperature 200-210 , Hot bed temp: 50 C-65 C, Print speed: 50-100MM/s.
- Neatly Wound Filament SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.
- High Precision +/- 0.02mm Tolerance PLA filament 1.75mm PLA 3D filament(Tolerance Level : 0.02mm).0.25KG 3d printer filament reel, perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles. Increase your 3d printing objects delicacy.
- SUNLU 250G Spool Diameter Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- High Compatiblity & Vacuum Pack PLA Filament Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PLA filament, provide better printing result.Environmental protection, 250g PLA filament is made from starch raw materials derived from renewable plant resources.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLUGW
Dimensions: 5.31 x 14.57 x 5.31 inches | Weight: 4.41 Pounds
See On Amazon #7
Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack Multicolor- Blue, Green, Orange, Red
Asin: B074W1XFRX | Model: HY-02-PLA-175-4PK-02 | PartNumber: HY-02-PLA-175-4PK-02 | Ean: 0887503180565 | UPC: 887503180565
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Perfect Compliment To Sample Colors For Your 3D Printer Or 3D Pen. Each Spool Contains 200G And Included Colors Are Blue, Green, Orange, And Red.
Pla Filament Is Compatible With Various 3D Printers Such As The Creality Ender 3, Anycubic, Prusa, Flashforge, Monoprice, And Many More.
Recommended Nozzle Temperature: 205 - 225 C; Filament Diameter - 1.75Mm +/- 0.03Mm.
Features
- PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
- Recommended Nozzle Temperature: 205 - 225 C; Filament diameter - 1.75mm +/- 0.03mm
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- PLA filament is compatible with various 3D printers such as the Creality Ender 3, Anycubic, Prusa, Flashforge, Monoprice, and many more
- Perfect compliment to sample colors for your 3D printer or 3D pen. Each spool contains 200g and included colors are Blue, Green, Orange, and Red
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 2.70 pounds
See On Amazon #8
MIKA3D 6-Pack 1.75mm Dual Color Silk PLA 3D Printer Filament Bundle, 250g Spools in 6 Bicolor Options
Asin: B0BMLD2GYD | Model: Bicolor Dual Color Silk 3D Printer PLA | PartNumber: Bicolor Dual Color Silk 3D Printer PLA | Ean: 0198168226773 | UPC: 198168226773
Strong Compatibility: 1.75Mm High Diameter Tolerance, To Ensure Consistent Feeding And Smooth Printing, It's Perfectly Compatible With Most Of The Fdm 3D Printers And 3D Pens In Market, Such As Creality Ender, Anycubic, Flashforge, Monoprice, Scrib3d, Mynt3d, Etc.
Extra Gift & Warranty: For Each Box Filament, It's Packed With Following Free Items As Extra Gift: One Bag Of Mixed Pla Different Colors Sample, Together With One Premium Quality Bottle Of Solid Stick, It's Great Fix Printing Tool For Your 3D Printer Head Bed, They Are Packed And Ship Together. For Each Spool Filament, It's Packed With Good Vacuum Package. If Any Question, Pls Kindly Inform Us At Any Time, We'll Always Here For You, To Serve You Best.
100% Tangle-Free Tips And Printing Setting: All Of Our Filament Are 100% Tangle-Free Before Package Opened, Pls Kindly Fix Filament End After Each Time Printing, Pls Make Sure To Insert Free End Of Filament Into Spool Holes, To Avoid Being Tangled For Next Time Use; To Improve Printing Quality, Pls Use New 0.4Mm+ 3D Printer Nozzle..
Silk Shiny Luster Pla Filament: Without Polishing, You Will Get Pearlescent And Gorgeous Printing Surface; Our Silk Dual Color Pla Is Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy To Print, Provide Excellent Surface Finished Of Printed Parts; It's Silk Like Feel Silky Shinny Surface With Silk Luster, Giving Smooth, Pearly And Unique Touch.
Features
- 6 Spools Dual Color Silk PLA Filament Bundle: This 2 Color in 1 Coextrusion Silk Filament Series, It's Amazing for Printing Multi Colors Products; This Bundle Pack Included 6 Metallic Shiny Colors: Silk Red Gold; Silk Coffee Gold, Silk Black Red, Silk Black Orange, Silk Lime Green Blue, Silk Purple Green. Each Spool Weight is 0.25kg, Total is 1.5Kg, Very Suitable to Print Multi-Colored 3d Print Objects, It's Great Sample and Gift Pack for 3D Printing
- Silk Shiny Luster PLA Filament: Without Polishing, You will Get Pearlescent and Gorgeous Printing Surface; Our Silk Dual Color PLA is Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy to Print, Provide Excellent Surface Finished of Printed Parts; It's Silk Like Feel Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch
- Strong Compatibility: 1.75mm High Diameter Tolerance, To Ensure Consistent Feeding and Smooth Printing, It's Perfectly Compatible with Most of the FDM 3D Printers and 3D Pens in Market, Such as Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc
- 100% Tangle-Free Tips and Printing Setting: All of Our Filament are 100% Tangle-Free before Package Opened, Pls Kindly Fix Filament End after Each Time Printing, Pls Make Sure to Insert Free End of Filament into Spool Holes, to Avoid Being Tangled for Next Time Use; To Improve Printing Quality, Pls Use New 0.4mm+ 3D Printer Nozzle.
- Extra Gift & Warranty: For Each Box Filament, It's Packed with Following Free Items as Extra Gift: One Bag of Mixed PLA Different Colors Sample, Together with One Premium Quality Bottle of Solid Stick, It's Great Fix Printing Tool for Your 3D Printer Head Bed, They Are Packed and Ship Together. For Each Spool Filament, It's Packed with Good Vacuum Package. If Any Question, Pls Kindly Inform us at Any Time, We'll Always Here for You, To Serve you Best
- See more on Amazon...
Brand: MIKA3D | Manufacturer: MIKA3D
Weight: 3.31 pounds
See On Amazon #9
Creality Wood Filament PLA, 3D Printer Filament 1.75 mm, Smooth Silk Texture, Toughness, 1kg(2.2lbs)/Spool Printing Filament, for All FDM Printers (Wood)
Asin: B0BZCXM2Q8 | Model: CR-Wood_3301130001_us1 | PartNumber: CR-Wood_3301130001_us1
Environmentally Friendly Materials: Based On The Pla As The Main Material, It Continues The Advantages Of Easy Molding, No Warping And Low Shrinkage Of Pla.
Creality Support: Creality Provides 12-Month & 24 Hours After-Sales Service. Note： Please Place This Product In A Dry And Ventilated Environment, Not In An Environment Of High Temperature, Sunny Or Humid Conditions.
Stable Printing, Low Shrinkage: Stable Performance For Good Creations, Meeting Your Expectations Of High Precision Printings.
Neating Winding, Smooth Feeding: Reduce Filament Waste, Save Time And Improve Printing Success Rate.
Features
- CR-Wood Filament: Exquisite Wood Texture for Unique Property. Premium wood color and clear texture make people feel like being back to nature
- Neating Winding, Smooth Feeding: Reduce filament waste, save time and improve printing success rate
- Environmentally Friendly Materials: Based on the PLA as the main material, it continues the advantages of easy molding, no warping and low shrinkage of PLA
- Stable Printing, Low Shrinkage: Stable performance for good creations, meeting your expectations of high precision printings
- Creality Support: Creality provides 12-month & 24 hours after-sales service. Note Please place this product in a dry and ventilated environment, not in an environment of high temperature, sunny or humid conditions
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 8.27 x 8.27 x 2.76 inches | Weight: 2.20 pounds
Warranty: 1 Year
See On Amazon #10
Stronghero3D PLA 3D Printer Filament 1.75mm,Galaxy Red,Black,Silk Purple,Net Weight 1kg Accuracy +/-0.05mm
Asin: B09W23C9GL | Model: PLA_N2_BRP | PartNumber: PLA_N2_BRP
Printing Tips: Recommend Heat Bed 50-60°C, Nozzle: 195-215°C, Speed 25-50Mm/S,Rectration Length 3-5Mm,Rectration Speed 40-50Mm/S,Support Flow 70%,Support Z Top Distance 0.6Mm.
100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're Not Completely Satisfied For Any Reason, Contact Us And We'll Help You.
Better Flow ,Premium 1.75Mm Pla Filament. It Has Consistent Diameter & Roundness, Less Stringing And Warping, Strong Layer Adhesion. No Impurities, No Clogged, Vacuum Package With Zipper Bag, Net Weight 1Kg/Spool.
Pla Silk And Pla Glitter Galaxy Effect ,The Finished 3D Printed Item Perfect For Arts, Crafts, Diy, Etc.Compliant For Many 3D Printers.
Features
- Unique product design, 2 different formula effects in one filament, silk and glitter effects, black, red, purple,,silky smooth surface and glitter starly sparkling
- PLA silk and pla glitter galaxy effect ,the finished 3D printed Item perfect for arts, crafts, DIY, etc.Compliant for many 3d printers
- Printing tips: recommend heat bed 50-60 C, nozzle: 195-215 C, speed 25-50mm/s,rectration length 3-5mm,rectration speed 40-50mm/s,support flow 70%,support Z top distance 0.6mm
- Better flow ,premium 1.75mm PLA filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package with zipper Bag, net weight 1KG/Spool
- 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you
- See more on Amazon...
Brand: Stronghero3D | Manufacturer: Stronghero3D
Weight: 2.20 pounds
See On Amazon #11
ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), 2KG Grey+Grey
Asin: B09X1KC61Z
【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
【𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 & 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 pounds
See On Amazon #12
ANYCUBIC High Speed 3D Printer Filament 1.75mm, Print Up to 10X Faster, Rapid PLA Filament with High Prints Quality, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Black
Asin: B0CGJBQK5H
【Efficiency Meets Quality】 Anycubic Rapid Pla Filament Enhance Printing Efficiency While Ensuring Excellent Results. Achieve Smooth And Delicate Surfaces On Models Especially On Overhanging Parts..
【Uninterrupted Fun, Worry-Free Printing】 Uninterrupted Material Output Is Guaranteed With Superior Flow And Its Good Cooling Effect, Ensuring No Clogs, No Shortage, And No Bunching During High-Speed Printing..
【Compatible With Most 3D Printers】 The Winding Of Anycubic High Speed 3D Printing Filament 1.75Mm Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of +/- 0.02Mm. Compatible With Both High-Speed And Standard 3D Printers On The Market Such As Anycubic Kobra 2/2 Max/2 Plus/2 Pro/2 Neo, Neptune 4 Series, K1, K1 Max, M5, M5c And More..
【High Fluidity, Rapid Shaping】 Compared To Standard Pla Filaments, Anycubic High-Speed Pla Filaments Boast Enhanced Fluidity And Better Cooling Effect, Ensuring Smooth And Consistent Feeding For Filaments After Melting And Rapid Model Cooling And Shaping..
Features
- Boosting Speed with High-Speed Core Anycubic High Speed 3D Printer Filament is up to 10X faster output pairing with the high speed 3D printer. Perfect for high-speed 3D printing. The High Speed PLA supports a maximum speed of 500mm/s, compared to the standard printing speed of 50mm/s. Please set the nozzle temperature according to the printing speed, "180-210 50-150mm/s", "210-230 150-300mm/s", "230-260 300-600mm/s".
- High Fluidity, Rapid Shaping Compared to standard PLA filaments, Anycubic High-Speed PLA Filaments boast enhanced fluidity and better cooling effect, ensuring smooth and consistent feeding for filaments after melting and rapid model cooling and shaping.
- Efficiency Meets Quality Anycubic Rapid PLA Filament Enhance printing efficiency while ensuring excellent results. Achieve smooth and delicate surfaces on models especially on overhanging parts.
- Compatible with Most 3D Printers The winding of Anycubic High Speed 3D Printing Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of +/- 0.02mm. Compatible with both high-speed and standard 3D printers on the market such as Anycubic Kobra 2/2 Max/2 Plus/2 Pro/2 Neo, Neptune 4 Series, K1, K1 Max, M5, M5C and more.
- Uninterrupted Fun, Worry-free Printing Uninterrupted material output is guaranteed with superior flow and its good cooling effect, ensuring no clogs, no shortage, and no bunching during high-speed printing.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 8.22 x 8.22 inches
See On Amazon #13
ANYCUBIC Photon Mono 2, Resin 3D Printer with 6.6'' 4K + LCD Monochrome Screen, Upgraded LighTurbo Matrix with High-Precision Printing, Enlarge Print Volume 6.49'' x 5.62'' x 3.5''
Asin: B0BWHGK525
【Larger Build Volume】The Printing Volume Of Photon Mono 2 Is 165X143x89mm, Which Is Larger Than That Of Photon Mono 4K Of The Same Machine Size. It Can Meet The Needs Of Saving Placement Space And Printing Large Models..
【New Version Slicing Software】Photon Workshop 3.0 Has Enhanced And Upgraded Core Features Such As Slicing, Punching, Support Adding, Shells Extracting, And Model Arrangement. It Has A More Straightforward Slicing Process And A New Ui Interface That Is Easier To Operate..
【High Printing Success Rate】Photon Mono 2 Adopts Laser Engraved Platform. It Has Excellent Flatness, Which Can Increase Model Adhesion And Greatly Improve Printing Success Rate. And Lcd Screen Protector Has Also Been Enlarged To Better Protect The Screen From Accidents Such As Resin Leaks And Scratches..
【Upgraded Lighturbo Matrix】Compare With Ordinary Matrix Light Source, Anycubic Lighturbo Matrix Provides A More Stable And Uniform Parallel Light Source, Which Can Effectively Reduce The Layer Lines And Eliminate Grid Lines. Therefore, Photon Mono 2 Can Make The Model Details More Vivid And The Model Surface Delicate And Smooth..
Features
- 6.6 4K+ HD screen ANYCUBIC Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 4096*2560, which can display the models tiny details. This can fully meet the printing needs of miniature models, and is a very good choice for upgrading from FDM printers to LCD printers
- Upgraded LighTurbo Matrix Compare with ordinary matrix light source, Anycubic LighTurbo matrix provides a more stable and uniform parallel light source, which can effectively reduce the layer lines and eliminate grid lines. Therefore, Photon Mono 2 can make the model details more vivid and the model surface delicate and smooth.
- Larger Build Volume The printing volume of Photon Mono 2 is 165x143x89mm, which is larger than that of Photon Mono 4K of the same machine size. It can meet the needs of saving placement space and printing large models.
- High Printing Success Rate Photon Mono 2 adopts laser engraved platform. It has excellent flatness, which can increase model adhesion and greatly improve printing success rate. And LCD Screen protector has also been enlarged to better protect the screen from accidents such as resin leaks and scratches.
- New Version Slicing Software Photon workshop 3.0 has enhanced and upgraded core features such as slicing, punching, support adding, shells extracting, and model arrangement. It has a more straightforward slicing process and a new UI interface that is easier to operate.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 20.88 x 11.81 x 11.81 inches
Warranty: 12 months warranty（Excluding LCD screen and release film, LCD screen warranty is for 6 months）
See On Amazon #14
YOUSU 3D Printer Filament PLA Filament 1.75mm Multicolor Mixed Filament 250g*4 Sample Pack.
Asin: B0C9J9DCDP | Ean: 0710917169768 | UPC: 710917169768
【Good Layer Adhesion & Rigidity】 - No Warping, No Jamming, No Blobs Or Layer Delamination Issues.Yousu Glittery 1.75 Pla Filament Is A Worry-Free Product That Has Great Bed Adhesion, Very Consistent Color, And Dimensional Accuracy. It Is More Rigid Than Almost All The Competitive 3D Printing Filaments Such As Pla+ Filament 1.75Mm..
【Printing Settings】 - Nozzle: 180~220˚C, Bed: 40~60 ˚C, Speed: 40~100 Mm/S. Applicable To Almost All Fdm 3D Printers ..
【Lifetime Warranty】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
【No Tangling And Clogging】Completely Mechanical Winding, Meticulous Manual Inspection, Precise Winding And No Overlapping Or Tangling. Without Clogging The Nozzle Or Extruder, Feed Continuously And Smoothly During Printing. More Accurately And Smoothly Printing Can Be Achieved..
【Cost-Effective】This Mulicolor Sample Pack Filament Provide Different Color Choice With One Packaging..
Features
- 4 Spools Multicolor PLA Filament Bundle : This Bundle Pack Included Giltter Galaxy Black color,Chameleon Blue/Purple Color, Glow in the Dark Starry Sky,Glitter Gold galaxy black color, Each Spool Weight is 0.25kg, Total is 1Kg, Very Suitable to Print Multi-Colored 3d Print Objects, It's Great Sample and Gift Pack for 3D Printing,Use code"YSGALAXY10 "to get extra discount.
- Cost-effective This Mulicolor sample pack filament Provide different color choice with one packaging.
- Good Layer Adhesion & Rigidity - No warping, no jamming, no blobs or layer delamination issues.Yousu glittery 1.75 PLA filament is a worry-free product that has great bed adhesion, very consistent color, and dimensional accuracy. It is more rigid than almost all the competitive 3D printing filaments such as PLA+ filament 1.75mm.
- No Tangling and Clogging Completely mechanical winding, meticulous manual inspection, precise winding and no overlapping or tangling. Without clogging the nozzle or extruder, feed continuously and smoothly during printing. More accurately and smoothly printing can be achieved.
- Printing Settings - Nozzle: 180~220 C, Bed: 40~60 C, Speed: 40~100 mm/s. Applicable to almost all FDM 3D printers .
- Lifetime Warranty - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Yousu | Manufacturer: YOUSU
Dimensions: 2.95 x 9.84 x 8.66 Inches | Weight: 2.20 pounds
See On Amazon #15
HATCHBOX Matte PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
Asin: B09G7BXN2J | Model: 3D PLA-1KG1.75-MAT-BLK | PartNumber: 3D PLA-1KG1.75-MAT-BLK | Ean: 0191314034307 | UPC: 191314034307
Beginner & Expert Friendly: Hatchbox 3D Filaments Are Made With Quality And Consistency In Mind, Making It Easy For Novice Users To Get Started With Basic Settings. Seasoned Printers Can Push Their Designs To The Limit Without Worrying About Purity, Tolerance Or Printing Issues..
Why Hatchbox? We’Re Proud To Be Known In The 3D Printing Community For Producing The Highest Quality Pla On The Market, With The Largest Selection Of Filaments And Colors At An Unbeatable Price. From Art And Design, To Prototypes And Models, Hatchbox Is Trusted To Deliver The Best In 3D Printing Technology..
Top Quality 3D Printing: Clog, Bubble And Tangle-Free! Hatchbox Pla Is Formulated To Offer Minimal Warping And Little To No Odor Without The Use Of A Heated Bed. Pla Is Vacuum-Sealed With Desiccant To Prevent Moisture Absorption, Allowing For High-Detail Resolution..
Smooth, Shine-Free, And No Gloss Pla Filament: Achieve Clean And Professional Looking Prints With Our New Matte Filament! This New 3D Filament Produces A Slick And Modern Look Perfect For Those Desiring A Smooth Texture And Soft Looking Matte Finish. Print All Your Favorites And More With The Same Quality Of Standard Pla!.
Features
- FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 210 C - 230 C (410 F - 446 F)
- SMOOTH, SHINE-FREE, and NO GLOSS PLA FILAMENT: Achieve clean and professional looking prints with our new Matte Filament! This new 3D filament produces a slick and modern look perfect for those desiring a smooth texture and soft looking matte finish. Print all your favorites and more with the same quality of standard PLA!
- BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
- TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! Hatchbox PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed. PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
- WHY HATCHBOX? We re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to prototypes and models, Hatchbox is trusted to deliver the best in 3D printing technology.
- See more on Amazon...
Brand: HATCHBOX | Manufacturer: HATCHBOX
Dimensions: 2.95 x 8.27 x 8.46 inches | Weight: 2.20 pounds
See On Amazon #16
Anycubic Kobra 2 Neo 3D Printer, Upgraded 250mm/s Faster Printing Speed with New Integrated Extruder Details Even Better, LeviQ 2.0 Auto-Leveling Smart Z-Offset Ideal for Beginners 8.7"x8.7"x9.84"
Asin: B0CCRDBH76
【Details Even Better】Apply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
【Excellent Customer Service】 Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
【Leviq 2.0 Automatic Leveling】With The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
【New Integrated Extruder】The Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 19.00 x 17.00 x 17.00 Inches | Weight: 18.74 pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon #17
IKSYTEM 3D Printer Filament Bundle, Dual Color Filament, Silk PLA Filament 1.75mm Bundle, Silk Gold Purple, Silk Red Green, Silk Blue Green, Silk Red Blue, 3D Printing Filament, 250gX 4 PLA Spools
Asin: B0C69Q8B25
【Silk Pla Filament 1.75Mm Bundle】- Iksytem Is Committed To The Development And Production Of Green 1.75Mm Pla Filament. Advanced Ccd Diameter Measuring And Self-Adaptive Control System In Manufacturing Satisfy These Pla Filaments Of 1.75 Mm Diameter..
【Strong Compatibility】- Iksytem Has Advanced Technology, Which Helps Silk Filament Pla To Be Compatible With Most Common Filament 3D Printers (Such As Ankermake, Mini 3D Printer, Comgrow Creality Ender, Elegoo Neptune 3 Max, Elegoo Neptune 3 Plus, Anycubic, Creality 3D, Sunlu, Do3d, Mynt3d, 3Doodler, Ams Compatible, Ender 5 Plus, Mk3, Etc.). This Filament Is Also Suitable For 3D Pen Printing..
【More Weighty Rainbow Pla Filament】- The 3D Printer Filament That Has Received Favorable User Reviews. The Size Of Each Roll Is 250G, Which Is A More Generous Portion Than Other Brands That Have 200G Per Roll..
【Recommend Settings】- We Recommend Printing At A Nozzle/Extrusion Temperature Of 190°C - 220°C (374°F - 428°F) And Bed/Platform Temperature Of 0°C - 60°C (0°F - 140°F). Typically, Smooth Silk Works Better When Printed Between 195°C - 200°C (383°F - 392°F). Recommended Printing Temperature Tower Tests The Optimum Temperature Range. Refer To The Main Image Of The Product Beetle, Use A Lower Speed To Print The Model, The Silk Effect Is Better!.
【Easy To Print】- Iksytem 3D Pla Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag, Easily Keeping 3D Printing Filament In Optimal Storage Condition And Free From Dust Or Dirt Before Opening The Vacuumed Sealed Packaging..
Features
- Dual Color PLA Filament - A bundle of 3D color changing pla enjoys 4 color combinations (Gold Purple, Red Green, Blue Green, Red Blue). This is a dual color 3d filament with all dual colors appearing at the same time. Refer to the main picture of the product Beetle, choose the right model, silk effect is better!
- Easy To Print - IKSYTEM 3D PLA filament comes in a sealed vacuum bag with a desiccant bag, easily keeping 3d printing filament in optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Silk PLA Filament 1.75mm Bundle - IKSYTEM is committed to the development and production of green 1.75mm PLA Filament. Advanced CCD diameter measuring and self-adaptive control system in manufacturing satisfy these PLA filaments of 1.75 mm diameter.
- Recommend Settings - We recommend printing at a Nozzle/Extrusion temperature of 190 C - 220 C (374 F - 428 F) and Bed/Platform temperature of 0 C - 60 C (0 F - 140 F). Typically, smooth silk works better when printed between 195 C - 200 C (383 F - 392 F). Recommended printing temperature tower tests the optimum temperature range. Refer to the main image of the product Beetle, use a lower speed to print the model, the silk effect is better!
- Strong compatibility - IKSYTEM has advanced technology, which helps silk filament pla to be compatible with most common filament 3d printers (such as AnkerMake, mini 3d printer, Comgrow Creality Ender, Elegoo neptune 3 max, Elegoo neptune 3 plus, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler, AMS compatible, Ender 5 plus, MK3, etc.). This filament is also suitable for 3d pen printing.
- More weighty Rainbow PLA Filament - The 3D printer filament that has received favorable user reviews. The size of each roll is 250g, which is a more generous portion than other brands that have 200g per roll.
- See more on Amazon...
Brand: IKSYTEM | Manufacturer: IKSYTEM
Dimensions: 6.29 x 6.88 x 6.29 inches | Weight: 2.86 pounds
Warranty: 2 year manufacturer
See On Amazon #18
Creality PLA Filament 1.75mm for K1 Max, 3D Printer Filament PLA Designed for High Speed 30-600mm/s, 1kg(2.2lbs)/Spool Hyper PLA Filament, Dimensional Accuracy 0.03 mm, Fits for 3D Printer (Grey)
Asin: B0BY24XXP4 | Model: Hyper PLA | PartNumber: Hyper PLA
Stronger Toughness - Creality 3D Printer Filament Pla Is Stronger And More Resilient Than Traditional Pla, With Higher Tensile Strength Than Abs, Making It Less Prone To Damage And Providing Better Structural Support For Printed Models..
Wide Applicability - The Hyper Pla Filament 1.75Mm Is Suitable For Most Creality 3D Printers, Such As K1, K1 Max, Ender 3 V3 Ke, Ender 3 V3 Se, It Is Also Compatible With High-Speed 3D Printers On The Market. Fit For Anycubic Kobra 2 3D Printers, Elegoo Neptune 4 3D Printers, Bambu 3D Printers, Ankermake M5 ＆ Ankermake M5c 3D Printers, Flashforge Adventurer 3 Pro2 ＆ Adventurer 4 Pro 3D Printers, Prusa 3D Printers, Monoprice 3D Printers, Flsun V400 3D Printers, Artillery 3D Printers, Qidi Max3 3D Printers Etc..
Neat Winding Process: Ensure The Quality For Long-Time Printing With Large Parts To Avoid Tangles And Jamming..
High Fluidity ＆ Fast Cooling - Creality Hyper Pla Is Developed Specifically For High-Speed Printing, Benefiting From Its High Fluidity And Fast Cooling Formula. The High Fluidity Provides Sufficient Melting And Extrusion, While The Quick Cooling Provides Rapid Solidification, Compatible With Both High-Speed And Regular Speed Printing..
High Dimensional Accuracy - The Dimensional Accuracy Of The 3D Printing Filament Pla Is Very High, Reaching The Level Of +/- 0.03 Mm, Which Means That It Can Print Detailed Models Very Accurately..
Features
- UP to 600MM/S HIGH-SPEED PRINTING - The Creality PLA Filament 1.75mm can print at a speed of up to 600 mm per second without compromising the printing effect. In addition, it can support high-speed and normal-speed printing at the same time, and the printing effect is very delicate.
- HIGH DIMENSIONAL ACCURACY - The dimensional accuracy of the 3D Printing Filament PLA is very high, reaching the level of +/- 0.03 mm, which means that it can print detailed models very accurately.
- STRONGER TOUGHNESS - Creality 3d printer filament pla is stronger and more resilient than traditional PLA, with higher tensile strength than ABS, making it less prone to damage and providing better structural support for printed models.
- HIGH FLUIDITY FAST COOLING - Creality Hyper PLA is developed specifically for high-speed printing, benefiting from its high fluidity and fast cooling formula. The high fluidity provides sufficient melting and extrusion, while the quick cooling provides rapid solidification, compatible with both high-speed and regular speed printing.
- WIDE APPLICABILITY - The hyper pla Filament 1.75mm is suitable for most Creality 3D Printers, such as K1, K1 Max, Ender 3 V3 KE, Ender 3 V3 SE, It is also compatible with high-speed 3D printers on the market. Fit for Anycubic Kobra 2 3D Printers, ELEGOO Neptune 4 3D Printers, Bambu 3D Printers, Ankermake M5 AnkerMake M5C 3D Printers, Flashforge Adventurer 3 Pro2 Adventurer 4 Pro 3D Printers, Prusa 3D Printers, Monoprice 3D Printers, FLSUN V400 3D Printers, Artillery 3D Printers, Qidi MAX3 3d printers ETC.
- NEAT WINDING PROCESS: Ensure the quality for long-time printing with large parts to avoid tangles and jamming.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 8.27 x 8.26 x 2.75 inches | Weight: 2.20 Pounds
Warranty: 1-year
See On Amazon #19
ANYCUBIC 3D Printer Kobra 2 Neo, 250mm/s Max Print Speed FDM 3D Printer Auto-Leveling Smart Z-Offset Upgraded Kobra Neo, Easy Assembly for Beginners Print Size 8.7"x8.7"x9.84"
Asin: B0CF4GVT8N
【Details Even Better】Apply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
【Excellent Customer Service】 Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
【Leviq 2.0 Automatic Leveling】With The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
【New Integrated Extruder】The Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 20.00 x 15.00 x 20.00 inches | Weight: 1.13 Pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon
Looking For Something Else?
Search