ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), 2KG Grey+Grey
Asin: B09X1KC61Z
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.ใ๐๐ฅ๐จ๐ -๐
๐ซ๐๐ & ๐๐ฎ๐๐๐ฅ๐-๐
๐ซ๐๐ใ Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
ใ๐
๐ข๐ฅ๐๐ฆ๐๐ง๐ญ ๐๐ง๐ฌ๐ญ๐๐ฅ๐ฅ๐๐ญ๐ข๐จ๐งใ 1. Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
ใ๐๐๐จ-๐
๐ซ๐ข๐๐ง๐๐ฅ๐ฒ & ๐๐ข๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒใ Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
ใ๐๐๐๐ญ ๐๐ฉ๐จ๐จ๐ฅ & ๐๐ซ๐๐ฆ๐ข๐ฎ๐ฆ ๐๐ฎ๐๐ฅ๐ข๐ญ๐ฒใ The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 Pounds
See On Amazon Similar To ANYCUBIC PLA Filament 1.75mm Bundle
#1
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey
Asin: B0834W5L3L | Model: 3D-PLA-BKGY | PartNumber: 3D-PLA-BKGY
ใ๐๐ฅ๐จ๐ -๐
๐ซ๐๐ & ๐๐ฎ๐๐๐ฅ๐-๐
๐ซ๐๐ใ Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
ใ๐
๐ข๐ฅ๐๐ฆ๐๐ง๐ญ ๐๐ง๐ฌ๐ญ๐๐ฅ๐ฅ๐๐ญ๐ข๐จ๐งใ 1. Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
ใ๐๐๐จ-๐
๐ซ๐ข๐๐ง๐๐ฅ๐ฒ & ๐๐ข๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒใ Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
ใ๐๐๐๐ญ ๐๐ฉ๐จ๐จ๐ฅ & ๐๐ซ๐๐ฆ๐ข๐ฎ๐ฆ ๐๐ฎ๐๐ฅ๐ข๐ญ๐ฒใ The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 pounds
See On Amazon #2
ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Gray
Asin: B0CF1SXM5N
ใNo Clogging, No BubblesใWithout Any Clogging Or Bubbles, Anycubic Pla Plus Filament Guarantees A Seamless Extrusion Of Filament, Resulting In A Refined And Consistent Finish For The Completed Model..
ใHigh CompatibilityใEnsuring Compatibility With Most Of Fdm 3D Printers And 3D Printing Pens Available In The Market. Our Vacuum Packaging Effectively Shields Against Moisture And Dust, Ensuring An Enhanced Printing Experience..
ใ Without Tangle HasslesใAnycubic 3D Printing Pla Plus Filament Is Without Tangle Hassles On The Roll And Easily Left The Spool Without Crossing Turns Which Can Result In Less Thread Pulling And Twisting, No Clogging. Besides, It Can Easily Lock The Filament After Use..
ใHigh Dimensional AccuracyใThe Winding Of Anycubic Pla Plus 3D Filament 1.75Mm Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of ยฑ0.02 Mm. Its High Precision And Minimal Shrinkage Work Together To Prevent Cracks And Warping..
Features
- High Toughness Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional Accuracy The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubbles Without any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle Hassles Anycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High Compatibility Ensuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 4.22 x 4.22 inches | Weight: 2.20 pounds
See On Amazon #3
SUNLU 250g PLA Filament 1.75mm Bundle,3D Printer Filament Bundle Multicolor, Neatly Wound PLA Filament, Individually Vacuum Packed,250g Spool,8 Rolls,Black+White+Grey+Transparent+Red+Blue+Orange+Green
Asin: B09TR9FXBL | Model: 1.75 PLA Filament | PartNumber: 1.75 PLA Filament
โขใNeatly Wound Filament ใSunlu Has A Professional Production Line With Strict Control Of Neatly Lined Up Lines To Avoid Knots During Printing.Completely Mechanical Wire Winding And Strict Manual Checks To Ensure Neat Lines With Few Kinks, Avoiding Possible Breaks..
โคใSunlu 250G Spool DiameterใSpool Diameter: 120Mm(4.7Inches), Spool Width: 43Mm(1.69Inches), Spool Hub Hole Diameter: 42Mm(1.65Inches). 250G Spool Size Of The Sunlu Filament Spool Is Suitable For Hanging On A Lot Of Fdm 3D Printers..
โฅใHigh Compatiblity & Vacuum Pack Pla FilamentใCompatible With 99% Fdm 3D Printers (With Heated Beds) And 3D Pen.Vacuum Packed Neatly Arranged Sunlu Pla Filament, Provide Better Printing Result.Environmental Protection, 250G Pla Filament Is Made From Starch Raw Materials Derived From Renewable Plant Resources..
โฃใHigh Precision +/- 0.02Mm Tolerance Pla Filamentใ1.75Mm Pla 3D Filament(Tolerance Level : ยฑ 0.02Mm).0.25Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance,Approximately 68M Of Pla Filament On Each Spool Ease Of Use,Minimal Warping,No Clogging,No Bubbles. Increase Your 3D Printing Objects Delicacy..
โกใPla Filament Recommend Settingsใ Sunlu Premium Pla Filament Offer The Advantage Of Incredible Ease Of 3D Printing. Sunlu Pla Filament 1.75Mm ,Optimized Print Quality,High Purity With Low Shrinkage And Superb Interlayer Adhesion. Recommended Sunlu Pla Filament Print Nozzle Temperature 200-210โ, Hot Bed Temp: 50ยฐC-65ยฐC, Print Speed: 50-100Mm/S..
Features
- SUNLU PLA 3D Printer Filament Bundle 2kg in Total, 8 Spools of 250g SUNLU 1.75mm PLA filament. Multiple Color Choices, 8 colours: Black+White+Grey+Transparent+Red+Blue+Orange+Green. Multiple colors satisfy your rich 3d printing creativity.
- PLA Filament Recommend Settings SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing. SUNLU PLA filament 1.75mm ,optimized print quality,high purity with low shrinkage and superb interlayer adhesion. Recommended SUNLU PLA filament Print nozzle temperature 200-210 , Hot bed temp: 50 C-65 C, Print speed: 50-100MM/s.
- Neatly Wound Filament SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.
- High Precision +/- 0.02mm Tolerance PLA filament 1.75mm PLA 3D filament(Tolerance Level : 0.02mm).0.25KG 3d printer filament reel, perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles. Increase your 3d printing objects delicacy.
- SUNLU 250G Spool Diameter Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- High Compatiblity & Vacuum Pack PLA Filament Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PLA filament, provide better printing result.Environmental protection, 250g PLA filament is made from starch raw materials derived from renewable plant resources.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLUGW
Dimensions: 5.31 x 14.57 x 5.31 Inches | Weight: 4.41 pounds
See On Amazon #4
ELEGOO PLA Filament 1.75mm Bundle 4KG, 3D Printer Filament Bulk Dimensional Accuracy +/- 0.02mm, 4 Pack 1kg Cardboard Spool(2.2lbs) Fits for Most FDM 3D Printers(Black, White, Blue, Red)
Asin: B0BV2CHG55
ใLess-Tangle And Easy To UseใFull Mechanical Winding And Strict Manual Examination To Ensure That The Line Is Neatly Arranged And Less Tangled, And To Avoid Possible Snap And Line Breaking. A Larger Spool Inner Diameter Design For Easy Feeding.
ใWide CompatibilityใUniversal Compatibility With Most Of The Common 1.75Mm Fdm 3D Printers. Elegoo 3D Printer Filament Offers A Range Of Colors To Boost Your Creativity And Is Essential For Your Printing Projects.
ใClog-Free & Bubble-FreeใDesigned And Manufactured With Superb Layer Bonding And Great Fluidity For Smooth And Stable Extrusion. Complete Dried For Before Packaging And Vacuum Sealed Well To Protect The Filament From Moisture, No Clogging And Bubbling Problems.
ใDimensional Accuracy & Consistencyใ Strict Tolerances Guarantee These Pla Filaments Of 1.75 Mm Diameter Much Smoother And More Stable Printing With The Dimensional Accuracy Of +/- 0.02 Mm, 1 Kg Spool (2.2Lbs).
Features
- High-Quality PLA Filaments Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish
- Dimensional Accuracy & Consistency Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm, 1 kg spool (2.2lbs)
- Less-tangle and Easy to Use Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding
- Clog-Free & Bubble-Free Designed and manufactured with superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for before packaging and vacuum sealed well to protect the filament from moisture, no clogging and bubbling problems
- Wide Compatibility Universal compatibility with most of the common 1.75mm FDM 3D printers. ELEGOO 3d printer filament offers a range of colors to boost your creativity and is essential for your printing projects
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 8.80 pounds
Warranty: 30 day guarantee for any quality reasons
See On Amazon #5
AMOLEN Silk PLA 3D Printer Filament Bundle, Shiny Multicolor Rainbow PLA Filament 1.75mm Pack, Fast Color Change PLA 3D Printing Filament for Most FDM 3D Printer, 200g X 4 Spools
Asin: B0CH3BCYJ6
ใHigh Compatibility FilamentใShiny Silk Pla Filaments Of 1.75 Mm Diameter. Accuracy +/- 0.02 Mm. 200G X 4 Spools. Shiny Silk Color Change Pla Filament Is Perfectly Compatible With Most Of The Fdm 3D Printer And 3D Pen, Comgrow Creality Ender, Anycubic, Creality 3D, Sunlu, Do3d, Mynt3d, 3Doodler. Printing Temperature 200-220โ. Printing Bed (Optional) 30-60โ.
ใAfter-Sales ServiceใAmolen Is Focused On Innovative And Better Quality 3D Printing Filaments. We Stand Behind The Quality And Performance Of Our 3D Printer Filament. The Defective Filament Can Be Reissued Or Refunded Fully. We Provide Professional 3D Printing Technical Guidance And Good 24/7 Customer Service.
ใWhy Choose Amolen Pla FilamentใUser's Mind And Keeping Innovation. Transparent Spool Shows More Color Of The 1.75Mm Pla Filament & Pla Consumption. Sealed Vacuum Bags To Keep The 3D Filament Dry And Keep Out Dust, Much Smoother And More Stable. You Get Amazing Color Transition For The Price Of One Roll.
ใQuality Pla FilamentใEnsuring Durability And Excellent Performance. Good Shaping, Strong Toughness, No Bubble, No Jamming, No Warping, Melt Well, Feed Smoothly And Constantly Without Clogging The Nozzle Or Extruder. You Can Print Beautiful Multicolors In One Pla Filament Bundle, Silk Glossy Smooth Appearance, Perfect For Arts, Crafts, Diy. Beginner & Expert Friendly.
Features
- Silk Multicolor Rainbow PLA AMOLEN S-series is A line of multi-color spinning fast color change, spiral random color change, bring your model more surprise effect. Spiral multicolor co-extruded PLA provide fast gradient effect, even small models can display multiple colors, larger models will show more irregular stripes
- Quality PLA Filament Ensuring durability and excellent performance. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. You can print beautiful multicolors in one PLA filament bundle, silk glossy smooth appearance, perfect for arts, crafts, DIY. Beginner & expert friendly
- High Compatibility Filament Shiny silk PLA filaments of 1.75 mm diameter. Accuracy +/- 0.02 mm. 200g X 4 Spools. Shiny silk color change PLA filament is perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler. Printing Temperature 200-220 . Printing Bed (Optional) 30-60
- Why Choose AMOLEN PLA Filament User's mind and keeping innovation. Transparent spool shows more color of the 1.75mm pla filament & PLA consumption. Sealed Vacuum Bags to keep the 3d filament dry and keep out dust, much smoother and more stable. You get amazing color transition for the price of one roll
- After-sales Service AMOLEN is focused on innovative and better quality 3d printing filaments. We stand behind the quality and performance of our 3D printer filament. The defective filament can be reissued or refunded fully. We provide professional 3D printing technical guidance and good 24/7 customer service
- See more on Amazon...
Brand: AMOLEN | Manufacturer: AMOLEN
Weight: 2.20 pounds
See On Amazon #6
ELEGOO PLA Plus Filament 1.75mm Black 4KG, PLA+ Tougher and Stronger 3D Printer Filament Pro Dimensional Accuracy +/- 0.02mm, 4 Pack 1kg Spool(2.2lbs) Fits for Most FDM 3D Printers
Asin: B0C7GDB9GQ
ใTop-Notch Accuracy & ConsistentใPrecise Production Process Guarantee Elegoo Pla Pro Filament Of 1.75Mm Diameter, Accuracy Of +/- 0.02Mm. Strict Tolerances And Perfect Dimensional Accuracy Ensure Smooth And Consistent Feeding For Filaments.
ใNo Clogging & No BubblesใComplete Dried Before Packing And Well Vacuum Sealed Protect The Filaments From Moisture And Dust,No Clogging And Bubbling. Perfectly Compatible With Most 1.75Mm Fdm 3D Printers On The Market.
ใGlossy Surface & Easy To UseใAccurate Deposition And Strong Layer Bonding Bring A Smoother Surface Finish Without Layer Delamination Issues. The Lower Printing Temperature Make It Very Easy To Print With Excellent Print Quality.
ใLess-Tangle & Neatly WoundใFull Mechanical Winding And Strict Manual Inspection Ensures That All Pla+ Filaments Are Neatly Wound, Which Effectively Reduces Tangles, Snap And Line Breakage Issues.
Features
- Higher Toughness & Impact Strength Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It s also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & Consistent Precise production process guarantee ELEGOO PLA Pro filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- Glossy Surface & Easy to Use Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature make it very easy to print with excellent print quality
- No Clogging & No Bubbles Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #7
ANYCUBIC PETG Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, Exceptional Toughness, Print with Most FDM 3D Printers, 1KG Spool, Gray
Asin: B0CDLXX7FD
ใ๐.๐๐๐ฆ๐ฆ ๐๐ข๐๐ฆ๐๐ญ๐๐ซ, ๐๐ข๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒใWithout Any Clogging Or Bubbles, Anycubic Petg Filament 1.75Mm Guarantees A Seamless Extrusion Of Filament, Resulting In A Refined And Consistent Finish For The Completed Model. The Winding Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of ยฑ0.02 Mm, Ensuring Compatibility With 99% Of Fdm 3D Printers And 3D Printing Pens Available In The Market. Its High Precision And Minimal Shrinkage Work Together To Prevent Cracks And Warping..
ใ๐๐๐๐ฎ๐ฎ๐ฆ ๐๐๐๐ค๐๐ ๐ข๐ง๐ ใAnycbuic Have Carefully Chosen Eco-Friendly And Non-Toxic Imported Materials. Our Vacuum Packaging Effectively Shields Against Moisture And Dust, Ensuring An Enhanced Printing Experience..
ใ๐๐ง๐ก๐๐ง๐๐๐ ๐๐ก๐๐ฆ๐ข๐๐๐ฅ & ๐๐๐ญ๐๐ซ ๐๐๐ฌ๐ข๐ฌ๐ญ๐๐ง๐๐ใEnhanced Chemical And Water Resistance Ensures Stability Even In High Humidity Environments, As Well As In The Presence Of Various Chemicals And Common Cleaning Agents. Additionally, Anycubic Petg Filament Excellent Adhesion Guarantees A Stronger And More Reliable High Success Rate For Printing..
ใ๐๐ญ๐ซ๐จ๐ง๐ ใExceptional Toughness And Impact Resistance Ensure That The Print Model Resists Breakage Even When Subjected To Bending Or Collision. Anycubic Petg Filament Maintains Outstanding Performance Over Time, Making It Ideal For Crafting Mechanical Parts, Engineering Models, And Other Structures Exposed To Mechanical Stress..
Features
- With a vibrant and vivid hue, the prints of Anycubic PETG 3D Printer Filament feature a smooth and delicate surface finish. They exhibit excellent clarity, appearing either semi-transparent or fully transparent when illuminated. This imparts a clear and aesthetically pleasing appearance to the models.
- Exceptional toughness and impact resistance ensure that the print model resists breakage even when subjected to bending or collision. Anycubic PETG Filament maintains outstanding performance over time, making it ideal for crafting mechanical parts, engineering models, and other structures exposed to mechanical stress.
- . , Without any clogging or bubbles, Anycubic PETG Filament 1.75mm guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model. The winding is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm, ensuring compatibility with 99% of FDM 3D printers and 3D printing pens available in the market. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- & Enhanced chemical and water resistance ensures stability even in high humidity environments, as well as in the presence of various chemicals and common cleaning agents. Additionally, Anycubic PETG Filament excellent adhesion guarantees a stronger and more reliable high success rate for printing.
- Anycbuic have carefully chosen eco-friendly and non-toxic imported materials. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 8.22 x 8.22 inches | Weight: 2.20 Pounds
Warranty: NO
See On Amazon #8
ANYCUBIC High Speed 3D Printer Filament 1.75mm, Print Up to 10X Faster, Rapid PLA Filament with High Prints Quality, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, 1KG Spool, Gray
Asin: B0CGJDJ19G
ใEfficiency Meets Qualityใ Anycubic Rapid Pla Filament Enhance Printing Efficiency While Ensuring Excellent Results. Achieve Smooth And Delicate Surfaces On Models Especially On Overhanging Parts..
ใUninterrupted Fun, Worry-Free Printingใ Uninterrupted Material Output Is Guaranteed With Superior Flow And Its Good Cooling Effect, Ensuring No Clogs, No Shortage, And No Bunching During High-Speed Printing..
ใCompatible With Most 3D Printersใ The Winding Of Anycubic High Speed 3D Printing Filament 1.75Mm Is Tidy And Maintains Dimensional Stability, With A Controlled Wire Diameter Tolerance Of +/- 0.02Mm. Compatible With Both High-Speed And Standard 3D Printers On The Market Such As Anycubic Kobra 2/2 Max/2 Plus/2 Pro/2 Neo, Neptune 4 Series, K1, K1 Max, M5, M5c And More..
ใHigh Fluidity, Rapid Shapingใ Compared To Standard Pla Filaments, Anycubic High-Speed Pla Filaments Boast Enhanced Fluidity And Better Cooling Effect, Ensuring Smooth And Consistent Feeding For Filaments After Melting And Rapid Model Cooling And Shaping..
Features
- Boosting Speed with High-Speed Core Anycubic High Speed 3D Printer Filament is up to 10X faster output pairing with the high speed 3D printer. Perfect for high-speed 3D printing. The High Speed PLA supports a maximum speed of 500mm/s, compared to the standard printing speed of 50mm/s. Please set the nozzle temperature according to the printing speed, "180-210 50-150mm/s", "210-230 150-300mm/s", "230-260 300-600mm/s".
- High Fluidity, Rapid Shaping Compared to standard PLA filaments, Anycubic High-Speed PLA Filaments boast enhanced fluidity and better cooling effect, ensuring smooth and consistent feeding for filaments after melting and rapid model cooling and shaping.
- Efficiency Meets Quality Anycubic Rapid PLA Filament Enhance printing efficiency while ensuring excellent results. Achieve smooth and delicate surfaces on models especially on overhanging parts.
- Compatible with Most 3D Printers The winding of Anycubic High Speed 3D Printing Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of +/- 0.02mm. Compatible with both high-speed and standard 3D printers on the market such as Anycubic Kobra 2/2 Max/2 Plus/2 Pro/2 Neo, Neptune 4 Series, K1, K1 Max, M5, M5C and more.
- Uninterrupted Fun, Worry-free Printing Uninterrupted material output is guaranteed with superior flow and its good cooling effect, ensuring no clogs, no shortage, and no bunching during high-speed printing.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 8.22 x 8.22 inches | Weight: 2.20 pounds
See On Amazon #9
ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm (1kg, Gray)
Asin: B08SQ9XM2K | Model: GMUS-HPLGY | PartNumber: GMUS-HPLGY
๐.๐๐๐ฆ๐ฆ ๐๐ข๐๐ฆ๐๐ญ๐๐ซ: Dimensional Accuracy +/- 0.02Mm To Ensure Even And Smooth Wire Output. Anycubic Filament Has Wide Compatibility Due To Its Small Diameter Error, And Is Suitable For Almost All 1.75Mm Fdm 3D Printers.
๐๐๐๐ฎ๐ฎ๐ฆ ๐๐๐๐ค๐๐ ๐ข๐ง๐ : Completely Dry For 24 Hours Before Packaging, And Vacuum Seal With Desiccant In A Re-Sealable Nylon Bag. Compared With Abs Filament, Pla Is Less Likely To Deform (This Makes Printing Easier).
๐๐ฉ๐๐๐ข๐๐ฅ ๐๐ญ๐ญ๐๐ง๐ญ๐ข๐จ๐ง: When Installing And Replacing Consumables, It Is Necessary To Heat The Print Head (Heated Above 200ยฐC), Otherwise The 3D Printer Will Be Easily Damaged. Recommended Printing Temperature Is 200-210โ Nozzle/Extrusion Temperature.
๐๐ข๐๐ ๐๐จ๐ฆ๐ฉ๐๐ญ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒ: Anycubic Pla Filament Is Widely Compatible With All Fdm 3D Printers On The Market..
Features
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is widely compatible with all FDM 3D printers on the market.
- . : dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200 C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 7.72 x 7.72 x 2.40 inches | Weight: 2.20 Pounds
See On Amazon #10
ANYCUBIC ASA Filament 1.75mm, Weather & Heat Resistant, 3D Printer Filament Suitable for Printing Outdoor Functional Parts, Dimensional Accuracy +/- 0.02mm, 1KG Spool, Black
Asin: B0CD25JR5Z
ใExcellent Mechanical PerformanceใModels Printed By Anycubic Asa 3D Filament Can Withstand Moderate Impact Forces Without Easily Deforming Or Breaking, Making It Suitable For Printing Engineering Parts Or Models Needed In Outdoor..
ใFor Most 3D PrintersใNeatly Wound With Consistent Dimensions, 1.75Mm Filament Diameter Tolerance Is Controlled Within ยฑ0.02Mm. Ensuring Compatibility With Most Of Fdm 3D Printers Available In The Market..
ใHigh QualityใNo Blockage Or Bubbles, Ensuring Smooth Extrusion And Finely Uniform Models. High Precision, Low Shrinkage, Less Risk Of Cracking And Warping..
ใHigh-Temperature ResilienceใMore Stable In High Temperatures Compared To Other Standard Materials. Anycubic Asa 3D Printing Filament Has A Heat Deformation Temperature Of Up To 90ยฐC, While Abs, Petg, And Pla Have Temperatures Of 75ยฐC, 63ยฐC, And 53ยฐC Respectively..
Features
- Superior Weather Resistance Anycubic ASA 3D Printer Filament is developed with outstanding resistance to sunlight, water, and aging. It can fend off UV rays, complex weather changes, and harsh natural environments. Printed models remain undamaged, resistant to aging and fading even after long exposure outdoors. It's perfect for printing outdoor functional parts such as plant pot, plant tools, car accessories and so on.
- High-Temperature Resilience More stable in high temperatures compared to other standard materials. Anycubic ASA 3D Printing Filament has a heat deformation temperature of up to 90 C, while ABS, PETG, and PLA have temperatures of 75 C, 63 C, and 53 C respectively.
- Excellent Mechanical Performance Models printed by Anycubic ASA 3D Filament can withstand moderate impact forces without easily deforming or breaking, making it suitable for printing engineering parts or models needed in outdoor.
- High Quality No blockage or bubbles, ensuring smooth extrusion and finely uniform models. High precision, low shrinkage, less risk of cracking and warping.
- For Most 3D Printers Neatly wound with consistent dimensions, 1.75mm filament diameter tolerance is controlled within 0.02mm. Ensuring compatibility with most of FDM 3D printers available in the market.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 2.87 x 8.22 x 8.22 Inches | Weight: 2.20 Pounds
Warranty: NO
See On Amazon #11
ANYCUBIC Silk Dual Color Pla Filament, 360 Color Change 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Silk Texture, 1KG Spool (2.2 lbs), Red Blue
Asin: B0CSPFM9D2 | Model: FBA-JP-HSC13-101 | PartNumber: FBA-JP-HSC13-101
ใAdhesion At Its Finestใ Strong Adhesion Of Anycubic Silk Dual Color 3D Printing Filament Significantly Minimized The Issues Such As Warping, Shrinkage, And Curling And Ensure Printing Success Rate. Immerse Yourself In A Printing Experience That's Both Smooth And Satisfying..
ใFor Most 3D Printersใ Neatly Wound With Consistent Dimensions, 1.75Mm Filament Diameter Tolerance Is Controlled Within ยฑ0.02Mm. Ensuring Compatibility With Most Of Fdm 3D Printers Available In The Market..
ใBye Bye Bubbles & Blockageใ Reusable Vacuum Bags And Sealed With Desiccant Protect The Filament From Moisture, And Avoid Bubbles Or Inconsistent Flow During The Printing Process..
ใComplete Compatibility, Easy To Printใ The Anycubic Silk Dual Color Filament Offers Great Compatibility With A Wide Range Of Temperatures And Printing Speeds, Making It Suitable For Mainstream Printers Available On The Market. This Versatility Allows Users To Achieve Optimal Printing Results Regardless Of Their Specific Printer Model..
Features
- Silk-Like Appearance, Shining Glow Adopted a cutting-edge triple dual-extrusion production process, the Anycubic Silk Dual Color 3D Printer Filament combines two or three colors in the entire spool. Printed models come out with a silk-like texture and a gradient effect, radiating with luminous colors and captivating brilliance.
- Complete Compatibility, Easy to Print The Anycubic Silk Dual Color Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market. This versatility allows users to achieve optimal printing results regardless of their specific printer model.
- Adhesion at Its Finest Strong adhesion of Anycubic Silk Dual Color 3d Printing Filament significantly minimized the issues such as warping, shrinkage, and curling and ensure printing success rate. Immerse yourself in a printing experience that's both smooth and satisfying.
- Bye Bye Bubbles & Blockage Reusable vacuum bags and sealed with desiccant protect the filament from moisture, and avoid bubbles or inconsistent flow during the printing process.
- For Most 3D Printers Neatly wound with consistent dimensions, 1.75mm filament diameter tolerance is controlled within 0.02mm. Ensuring compatibility with most of FDM 3D printers available in the market.
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Weight: 2.20 Pounds
Warranty: No
See On Amazon #12
Creality 3D Printer Filament Bundle, PLA Filament 1.75mm, PLA Black, PLA White, PLA Gray, 3D Printing Filament 1kg X 3 Spools
Asin: B0CH9LJ3P3
Features
- Creality 3D Printer Filament Bundle, PLA Filament 1.75mm, PLA Black, PLA White, PLA Gray, 3D Printing Filament 1kg X 3 Spools
- See more on Amazon...
Brand: Creality
Weight: 2.20 Pounds
See On Amazon #13
Creality 3D Printer PLA Filament Bundle, 5KG(5.5lbs)/Spool, PLA Filament 1.75mm, 3D Printer BASF PLA Filament Bundle, White+Black+Grey+Red+Green
Asin: B0CPLL4ZZD
Less Bubbles, No Odor - Recommended Printing Temperature: 190ยฐC - 230ยฐC (374ยฐF - 446ยฐF), Heat Bed Temperature: 25ยฐC -60ยฐC (77ยฐF - 140ยฐF). The 1.75 Pla Filament Has Professional Vacuum Packaging To Keep It Dry And Keep Out Dust..
Compatible Models - Hp Ultra Pla Filament Is Widely Used In Fdm 3D Printers On The Market. The Pla Filament 1.75Mm Is Suitable For Most Of Creality's Ender Printers And Cr Printers..
Smooth Printing Filament: Thinness While Toughness, Easy To Print, Effectively Avoiding Warping And Nozzle Clogging. Focus On Details, Our Pla Filaments With High Precision And High Gloss Surface..
Neat Winding Process - The Creality Hp Ultra Pla Ensures The Quality For Long-Time Printing With Large Parts To Avoid Tangles And Jamming..
Features
- HIGH TOUGHNESS without BREAKAGE - The Creality PLA Filament repeated bending with less susceptibility to breakage, no worries about printing interruption.
- NEAT WINDING PROCESS - The Creality HP Ultra PLA ensures the quality for long-time printing with large parts to avoid tangles and jamming.
- LESS BUBBLES, NO ODOR - Recommended printing temperature: 190 C - 230 C (374 F - 446 F), Heat Bed Temperature: 25 C -60 C (77 F - 140 F). The 1.75 pla filament has professional vacuum packaging to keep it dry and keep out dust.
- SMOOTH PRINTING FILAMENT: thinness while toughness, easy to print, effectively avoiding warping and nozzle clogging. Focus on details, our PLA filaments with high precision and high gloss surface.
- COMPATIBLE MODELS - HP Ultra PLA filament is widely used in FDM 3D printers on the market. The pla Filament 1.75mm is suitable for most of Creality's Ender printers and CR printers.
- See more on Amazon...
Brand: Creality
Weight: 5.50 Pounds
See On Amazon #14
Creality 3D Printer PLA Filament Bundle, 3KG(3.3lbs) Spool, PLA Filament 1.75mm, 3D Printer BASF PLA Filament Bundle, White+Black+Grey
Asin: B0CGWX43KC
Less Bubbles, No Odor - Recommended Printing Temperature: 190ยฐC - 230ยฐC (374ยฐF - 446ยฐF), Heat Bed Temperature: 25ยฐC -60ยฐC (77ยฐF - 140ยฐF). The 1.75 Pla Filament Has Professional Vacuum Packaging To Keep It Dry And Keep Out Dust..
Basf's Recommended - The Creality Hp Ultra Pla Is A High-Quality Pla Jointly Launched By Creality And Basf, A Century-Old Chemical Company. Strict Production, Quality Control And Complete Printing Solutions Help Consumers Achieve Free Innovation And Explore Wireless Possibilities..
Smooth Printing Filament: Thinness While Toughness, Easy To Print, Effectively Avoiding Warping And Nozzle Clogging. Focus On Details, Our Pla Filaments With High Precision And High Gloss Surface..
Neat Winding Process - The Creality Hp Ultra Pla Ensures The Quality For Long-Time Printing With Large Parts To Avoid Tangles And Jamming..
Features
- HIGH TOUGHNESS without BREAKAGE - The Creality PLA Filament repeated bending with less susceptibility to breakage, no worries about printing interruption.
- NEAT WINDING PROCESS - The Creality HP Ultra PLA ensures the quality for long-time printing with large parts to avoid tangles and jamming.
- LESS BUBBLES, NO ODOR - Recommended printing temperature: 190 C - 230 C (374 F - 446 F), Heat Bed Temperature: 25 C -60 C (77 F - 140 F). The 1.75 pla filament has professional vacuum packaging to keep it dry and keep out dust.
- SMOOTH PRINTING FILAMENT: thinness while toughness, easy to print, effectively avoiding warping and nozzle clogging. Focus on details, our PLA filaments with high precision and high gloss surface.
- BASF's RECOMMENDED - The Creality HP Ultra PLA is a high-quality PLA jointly launched by CREALITY and BASF, a century-old chemical company. Strict production, quality control and complete printing solutions help consumers achieve free innovation and explore wireless possibilities.
- See more on Amazon...
Brand: Creality
Weight: 3.30 Pounds
See On Amazon #15
(Kobra 2 Neo) Bundle ANYCUBIC PLA 3D Printer Filament and Kobra 2 Neo, 250mm/s Max Print Speed FDM 3D Printer Auto-Leveling Smart Z-Offset, Black, 1kg
Asin: B0CJFPKY14
ใ๐๐ฅ๐จ๐ -๐
๐ซ๐๐ & ๐๐ฎ๐๐๐ฅ๐-๐
๐ซ๐๐ใ Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
ใAutomatic Leveling & Easy To UseใWith The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users Including Beginners And Usage Scenarios, So As To Start Creation Efficiently And Easily.
ใ5X High-SpeedใMore Than 65% Shorter Time When Printing The Same Model.The Maximum Print Speed Is 250Mm/S.Recommended Print Speed Is 150Mm/S Ensures A Perfect Blend Of Precision And Performance, Empowering You To Bring Your Ideas To Life With Unparalleled Speed And Accuracy.
ใ๐๐๐๐ญ ๐๐ฉ๐จ๐จ๐ฅ & ๐๐ซ๐๐ฆ๐ข๐ฎ๐ฆ ๐๐ฎ๐๐ฅ๐ข๐ญ๐ฒใ The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- 5X High-Speed More than 65% shorter time when printing the same model.The Maximum Print Speed is 250mm/s.Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy
- Automatic Leveling & Easy to Use With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users including beginners and usage scenarios, so as to start creation efficiently and easily
- See more on Amazon...
Brand: ANYCUBIC
See On Amazon #16
(Anycubic Kobra 2 Neo) Bundle ANYCUBIC 3D Printer Kobra 2 Neo, 250mm/s Faster Printing Speed and ANYCUBIC High Speed 3D Printer Filament 1.75mm, Black, 1kg
Asin: B0CM5LT2GG
ใDetails Even BetterใApply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
ใExcellent Customer Serviceใ Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year Warranty (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
ใLeviq 2.0 Automatic LevelingใWith The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
ใNew Integrated ExtruderใThe Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC
See On Amazon #17
(Gray) Bundle Anycubic Kobra 2 Max 3D Printer, 500mm/s High-Speed Printing with Auto Leveling High-Performance and ANYCUBIC High Speed 3D Printer Filament 1.75mm
Asin: B0CPV9J6VD
ใEffortless Auto-LevelingใBy Designing A Unique Module, After Automatic Leveling, It Can Intelligently Compensate For Z-Axis Offset, While Also Supporting Custom Z-Axis Compensation Values, Meeting The Needs Of Different Users And Usage Environments. One-Click Quick Start For Creative Ideas, Ensuring Successful Printing..
ใExcellent Customer Serviceใ Each Anycubic Kobra 2 Max 3D Printer Comes With A One-Year Warranty (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
ใVibration Compensation & Flow ControlใThe One-Click "Vibration Compensation" Detects The Resonance Frequency Of The X/Y Axes And Adjusts The Motion Control Intelligently To Effectively Eliminate Resonance Vertical Lines And Bracket Lines, Ensuring Printing Accuracy And Stability. With "Flow Control", Intelligent Compensation For Retraction And Refilling Ensures Evenly And Fully Printed Layers, Enhancing Print Quality And Detail Representation..
ใ16.5X16.5X19.7In Large Printing SizeใAnycubic Kobra 2 Max Boasts An Impressive Printing Size Of 420 X 420 X500mm/16.5X16.5X19.7Inch, Capable Of Printing Models With A Volume Of Around 88 Liters In One Go..
Features
- 500MM/S HIGH-SPEED PRINTING Anycubic Kobra 2 Max 3D printer is designed for efficiency, boasting a max speed of 500mm/s and 10000mm/s Acceleration, recommended print speed is 300mm/s, which is 10 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
- 16.5x16.5x19.7in LARGE PRINTING SIZE Anycubic Kobra 2 Max boasts an impressive printing size of 420 x 420 x500mm/16.5x16.5x19.7inch, capable of printing models with a volume of around 88 liters in one go.
- EFFORTLESS AUTO-LEVELING By designing a unique module, after automatic leveling, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments. One-click quick start for creative ideas, ensuring successful printing.
- VIBRATION COMPENSATION & FLOW CONTROL The one-click Vibration Compensation detects the resonance frequency of the X/Y axes and adjusts the motion control intelligently to effectively eliminate resonance vertical lines and bracket lines, ensuring printing accuracy and stability. With Flow Control, intelligent compensation for retraction and refilling ensures evenly and fully printed layers, enhancing print quality and detail representation.
- Excellent Customer Service Each Anycubic Kobra 2 Max 3D Printer comes with a one-year warranty (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC
See On Amazon #18
(Anycubic Kobra 2 Pro) Bundle ANYCUBIC PLA 3D Printer Filament and Anycubic 3D Printer Kobra 2 Pro, 500mm/s High-Speed Printing, High Power Powerful Computing New Structure, White, 1kg
Asin: B095PBN7ZT
ใ๐๐๐๐ฎ๐ซ๐๐๐ฒ & ๐๐จ๐ง๐ฌ๐ข๐ฌ๐ญ๐๐ง๐๐ฒใ Anycubic 3D Printer Pla Filament Of 1.75Mm Diameter, Minimum Dimensional Tolerance ยฑ0.02Mm, Which Makes Filament Outflow Smoother, Came Out Homogeneous. The Low Shrinkage And Stable Printing Dimensions Make The Fusion Between The Layers Very Good To Obtain An Even Better-Bridging Result. You Don't Worry The Diameter Changes A Lot Then The Feed Rate Is Disrupted With Thicker And Thinner Layers At All.
ใ๐๐ฅ๐จ๐ -๐
๐ซ๐๐ & ๐๐ฎ๐๐๐ฅ๐-๐
๐ซ๐๐ใ Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
ใ๐๐๐๐ญ ๐๐ฉ๐จ๐จ๐ฅ & ๐๐ซ๐๐ฆ๐ข๐ฎ๐ฆ ๐๐ฎ๐๐ฅ๐ข๐ญ๐ฒใ The 3D Printing Pla Filament Was Neat On The Roll And Easily Left The Spool Without Crossing Turns. Resulting In Less Thread Pulling And Twisting, No Clogging, And Super Under-Extruding. It Produces The Cleanest, Least Stringing Prints Of Any Of The Filaments You Have Used While Resisting Warping And Providing The Glossiest Finish. Without A Single Jam And Adhesion Issue Which Meets Your Demands For Printing Freely.
ใHigh Power Powerful ComputingใEquipped With A High-Performance Cortex-A7 1.2Ghz Processor, Providing Abundant Computing Power For Faster Calculation And Command Execution, Which Results In 10X Faster Printing..
Features
- 10X Boost in Speed Compared to mainstream FDM 3D printers, the printing speed is increased by 10 times. The maximum printing speed up to 500mm/s. Recommended print speed is 300mm/s.
- High Power Powerful Computing Equipped with a high-performance Cortex-A7 1.2Ghz processor, providing abundant computing power for faster calculation and command execution, which results in 10x faster printing.
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- See more on Amazon...
Brand: ANYCUBIC
Weight: 2.20 Pounds
See On Amazon #19
(Gray Bundle Anycubic 3D Printer Kobra 2 Plus, 500mm/s High-Speed Printing with Dual Z-Axis New Structure and ANYCUBIC High Speed 3D Printer Filament 1.75mm
Asin: B0CL4SYGMQ
ใSmart App ControlใWith The New Version Of Anycubic App Remote Networking Firmware Upgrading, And Real-Time Viewing Of Printer Status Are Achievable. Future Updates Will Also Support Online Slicinc And Printing, Video Monitoring And Time-Lapse Photography Remote Control And Management, And An Open Model Library Function Module, Kick-Starting A "Smart"..
ใOptimized ConfigurationใBy Using Direct Extruder And A Dual-Motor Dual-Z-Axis Motion Structure That Have Been Perfectly Optimized For The Extrusion And Cooling Systems, It Efficiently And Accurately Delivers Materials, Allowing For Quick Melting And Cooling. This Leads To Smooth Operation And Fewer Visible Layer Lines..
ใEffortless Auto-LevelingใBy Designing A Unique Module, After Automatic Leveling, It Can Intelligently Compensate For Z-Axis Offset, While Also Supporting Custom Z-Axis Compensation Values, Meeting The Needs Of Different Users And Usage Environments. One-Click Quick Start For Creative Ideas, Ensuring Successful Printing..
ใ12.6X12.6X15.7In Large Printing SizeใAnycubic Kobra 2 Plus Boasts An Impressive Printing Size Of 320*320*400Mm/12.6 X 12.6 X 15.7Inch, Can Print Models Of Approximately 41 Liters In Volume At One Time. Full-Sized Printing Of The Same Model, Compared To Similar Products On The Market With A Printing Speed Of 50Mm/S, Printing Time Is Shortened By 31 H 35 Mins, Efficient Creation, Energy-Saving, And Environmental-Friendly..
Features
- 500MM/S HIGH-SPEED PRINTING Anycubic Kobra 2 Plus 3D printer is designed for efficiency, boasting a max speed of 500mm/s and 10000mm/s Acceleration, recommended print speed is 300mm/s, which is 10 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
- 12.6x12.6x15.7in LARGE PRINTING SIZE Anycubic Kobra 2 Plus boasts an impressive printing size of 320*320*400mm/12.6 x 12.6 x 15.7inch, can print models of approximately 41 liters in volume at one time. Full-sized printing of the same model, compared to similar products on the market with a printing speed of 50mm/s, printing time is shortened by 31 h 35 mins, efficient creation, energy-saving, and environmental-friendly.
- SMART APP CONTROL With the new version of Anycubic APP remote networking firmware upgrading, and real-time viewing of printer status are achievable. Future updates will also support online slicinc and printing, video monitoring and time-lapse photography remote control and management, and an open model library function module, kick-starting a smart.
- EFFORTLESS AUTO-LEVELING By designing a unique module, after automatic leveling, it can intelligently compensate for Z-axis offset, while also supporting custom Z-axis compensation values, meeting the needs of different users and usage environments. One-click quick start for creative ideas, ensuring successful printing.
- OPTIMIZED CONFIGURATION By using direct extruder and a dual-motor dual-Z-axis motion structure that have been perfectly optimized for the extrusion and cooling systems, it efficiently and accurately delivers materials, allowing for quick melting and cooling. This leads to smooth operation and fewer visible layer lines.
- See more on Amazon...
Brand: ANYCUBIC
See On Amazon ๏ปฟ
Looking For Something Else?
Search