Adafruit 4489 L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mA
Asin: B085KYNY3H
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Height With Pins: 7Mm.
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.39 x 3.54 x 2.76 inches | Weight: 0.00 Pounds
See On Amazon Similar To Adafruit 4489 L9110H HBridge Motor
#1
High-Power H -Bridge DC Motor Driver Module 55A overcurrent Protection Program Provides Smart car c51-5PCS
Asin: B0BYNGR6X3
Features
- High-power H -bridge DC motor driver module 55A overcurrent protection program provides smart car c51--5PCS
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #2
BOJACK L298N Motor DC Dual H-Bridge Motor Driver Controller Board Module Stepper for Arduino Intelligent Car Power UNO MEGA R3 Mega2560 with 4pcs
Asin: B0C5JCF5RS | Model: BJ-L298N | PartNumber: BJ-L298N | Ean: 0762917148410 | UPC: 762917148410
Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 1.00 x 9.00 x 4.00 inches | Weight: 0.07 pounds
See On Amazon #3
HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560
Asin: B07BK1QL5T | Model: 3-01-0032-4PCS | PartNumber: 3-01-0032-4PCS
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
Large Capacity Filter Capacitance, Afterflow Protection Diode, More Stable And Reliable.
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Features
- L298N as main driver chip makes strong driving ability/small heating/strong anti-interference/low calorific value
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo®
Dimensions: 1.18 x 2.36 x 2.17 inches
See On Amazon #4
DROK DC Motor Driver, L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation
Asin: B06XGD5SCB | Model: 200206_OZ | PartNumber: 200206_OZ | Ean: 0701822755689 | UPC: 701822755689
Forward And Revsersely Rotate: The In1, In2/In3, In4 Port Can Control Forward Or Reverse Motor Rotation..
Under Voltage Protection: The Motor Driver Module Is With Under Voltage Protection To Prevent Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable Signal Terminal (Ena) Input Pwm Can Regulate Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Controller Board Adopts Dual H Bridge, Can Drive Two Dc Motors At The Same Time..
Features
- DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
- STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
- FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
- PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
- UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #5
4 PACK L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power Compatible with Arduino UNO MEGA R3 Mega2560
Asin: B07WS89781 | Ean: 0701715429888 | UPC: 701715429888
Using Large Capacity Filter Capacitor,This Module Can Follow Current To Protect Diodes,And Improve The Reliability..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part.But To Avoid The Damage Of The Voltage Stabilizing Chip,Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Features
- Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability,low calorific value and strong anti-interference ability.
- This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage.
- Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability.
- Dual-channel H-bridge driver working mode creates higher working efficiency
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #6
WWZMDiB L298N Stepper Motor DC Dual H-Bridge Driver Controller Board Module for Arduino Raspberry Pi (2Pcs L298N)
Asin: B0CR6BX5QL | Model: L298N | PartNumber: L298N | Ean: 0705252405800 | UPC: 705252405800
⚡【Logic Voltage】：5V(Current 0Ma-36Ma).
⚡【Maximum Power】: 25W.
⚡【Drive Voltage】: 5V-35V(Current: 2A (Max Single Bridge).
🎯【Operating Mode】: H-Bridge Driver (Dual).
Features
- L298N Motor Driver Controller Board Module :L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- Operating mode : H-bridge driver (dual)
- Logic voltage 5V(current 0mA-36mA)
- Drive voltage : 5V-35V(current: 2A (MAX single bridge)
- Maximum power : 25W
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #7
HiLetgo 5pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor
Asin: B00M0F243E | Model: 3-01-0499 | PartNumber: 3-01-0499 | Ean: 0702082656921 | UPC: 702082656921
Module Supply Voltage :2.5-12V.
Dual Motor Driver Chip L9110s.
Features
- HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board
- Dual motor driver chip L9110S
- Module supply voltage :2.5-12V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
Asin: B07ZT619TD | Ean: 0744678331003 | UPC: 744678331003
Tt Motor: The Motor Is A Two-Axis Motor With A Reduction Ratio Of 1:48, Which Has Strong Anti-Interference Ability..
To Avoid Damage The Voltage Stabilizing Chip Of Motor Drive Module, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage..
Smart Car Wheels: The Wheels Are Made Of High-Strength Plastic And The Tires Are Made Of Durable Black Rubber..
Motor Drive Controller: L298n Used As The Main Driver Chip. It Has The Strong Driving Ability, Low Calorific Value And Strong Anti-Interference Ability..
Features
- This is a good parts kit for RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
- Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
- TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
- Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
- To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #9
Adafruit Motor/Stepper/Servo Shield for Arduino v2.3 Kit
Asin: B00PUTH3B0 | Model: 1438 | PartNumber: 1438 | Ean: 0702658303396 | UPC: 702658303396
Instead Of A L293d Darlington Driver, We Now Have The Tb6612 Mosfet Driver: With 1.2A Per Channel And 3A Peak Current Capability. It Also Has Much Lower Voltage Drops Across The Motor So You Get More Torque Out Of Your Batteries, And There Are Built-In Flyback Diodes As Well..
As Of 3/21/2014 We Are Shipping Motor Shields With The Terminal Blocks, And Power Jumper Pre-Soldered On. You'll Still Need To Do A Little Soldering To Put On The Shield-Headers (Or Stacking Headers) But It Should Be Even Easier And Faster To Get Started!.
Instead Of Using A Latch And The Arduino's Pwm Pins, We Have A Fully-Dedicated Pwm Driver Chip Onboard. This Chip Handles All The Motor And Speed Controls Over I2c. Only Two Pins (Sda & Scl) Are Required To Drive The Multiple Motors, And Since It's I2c You Can Also Connect Any Other I2c Devices Or Shields To The Same Pins. This Also Makes It Drop-In Compatible With Any Arduino, Such As The Uno, Due, Leonardo And Mega R3..
Completely Stackable Design: 5 Address-Select Pins Means Up To 32 Stackable Shields: That's 64 Steppers Or 128 Dc Motors! What On Earth Could You Do With That Many Steppers? I Have No Idea But If You Come Up With Something Send Us A Photo Because That Would Be A Pretty Glorious Project..
Features
- New version 2.3!
- Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
- Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.
- Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.
- As of 3/21/2014 we are shipping motor shields with the terminal blocks, and power jumper pre-soldered on. You'll still need to do a little soldering to put on the shield-headers (or stacking headers) but it should be even easier and faster to get started!
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Weight: 0.00 Pounds
See On Amazon #10
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
Asin: B014KMHSW6 | Model: CECOMINOD012186 | PartNumber: CECOMINOD012186 | Ean: 0735090644130, 6930864920920, 0783325944715 | UPC: 783325944715, 735090644130
Use Large-Capacity Filter Capacitors And Diode With Freewheeling Protection Function, Increasing Reliability.
Large Capacity Filter Capacitance,Afterflow Protection Diode, More Stable And Reliable..
High Working Power To 35V,Large Current Can Reach 3A Max And Continue Current Is 2A, Power To 25W..
To Avoid Damage The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Features
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
- See more on Amazon...
Brand: Qunqi | Manufacturer: Qunqi
Dimensions: 0.75 x 1.14 x 0.98 inches | Weight: 0.07 pounds
See On Amazon #11
WWZMDiB 4Pcs Mini L298N 2 Channel H Bridge DC Motor Driver Board with MX1508 Chip for Electric Projects, Smart Car Robot.
Asin: B0BD53Q7TT | Model: MG037-2 | PartNumber: MG037-2 | Ean: 0618202520594 | UPC: 618202520594
⚡【Input Voltage】: 1.8~7V.
🥇Use Of Imported Original Chip, Built-In Low On-Resistance Mos Switch, Minimal Heat, No Heat Sink, Small Size, Low Power Consumption, Is Ideal For Battery Powered..
⚡【Output Current】: Single Operating Current 1.5A, Peak Current Up To 2.5A, Low Standby Current (Less Than 10Ua)..
⚡【Supply Voltage】: 2~10V..
Features
- Mini L298N 2 Channel H Bridge DC Motor Driver Board : Can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed.for Electric Projects, Smart Car Robot.
- Supply voltage : 2~10V.
- Input Voltage : 1.8~7V
- Output Current : Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 10uA).
- Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #12
Motor Controller, Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Uses a Full H-Bridge Driver Module Full-Bridge MOSFET Driver Chip
Asin: B07SH6BX97 | Ean: 0746771646985 | UPC: 746771646985
To Achieve The Motor Forward And Reverse Rotation, Two Pwm Input Maximum 200Khz Frequency.
The Power Supply Voltage 5V To 15V.
3.3V To 12V Power On Average Use, Fully Compatible.
With The Microcontroller Pwm Isolation, Effectively Protect Microcontroller.
Features
- This is a MOSFET high current (50A) H-bridge driver module
- With the microcontroller PWM isolation, effectively protect microcontroller
- To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency
- 3.3V to 12V power on average use, fully compatible
- The power supply voltage 5V to 15V
- See more on Amazon...
Brand: Pokerty | Manufacturer: Pokerty
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #13
Honbay L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove Nano Robo
Asin: B01CC8XI60 | Model: L298N-1P | PartNumber: L298N-1P | Ean: 6957316621754
Dual-Channel H-Bridge Driver Working Mode Creates Higher Working Efficiency.
This Module Can Use Built-In 78M05 For Electric Work Via A Driving Power Supply Part. But To Avoid The Damage Of The Voltage Stabilizing Chip, Please Use An External 5V Logic Supply When Using More Than 12V Driving Voltage.
Using Large Capacity Filter Capacitor, This Module Can Follow Current To Protect Diodes, And Improve The Reliability.
L298n As Main Driver Chip Makes Strong Driving Ability/Small Heating/Strong.
Features
- L298N has such characteristics as strong driving ability, low calorific value and strong anti-interference ability
- L298N as main driver chip makes strong driving ability/small heating/strong
- Dual-channel H-bridge driver working mode creates higher working efficiency
- Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability
- This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- See more on Amazon...
Brand: Honbay | Manufacturer: Honbay
Weight: 0.00 Pounds
See On Amazon #14
Aideepen 5pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car Power
Asin: B075S368Y2 | Model: 0113395 | PartNumber: 0113395 | Ean: 0783057981521 | UPC: 783057981521
Dual 1.5A * 2, The Peak Current To Be 2.5A, Built-In Thermal Protection Circuit, Do Not Be Afraid Motor Stall Burned, Automatic Recovery After The Temperature Dropped.
Small Size, Light Weight, Low Standby Current, Is The Ideal Choice For Your Car Model.
Minimal Heat, No Heat Sink, Small Size, Low Power Consumption, Is Ideal For Battery Powered.
Dual H-Bridge Motor Driver, Can Drive Two Dc Motors Or A 4-Wire Two-Phase Stepper Motor.
Features
- Use of imported original chip, built-in low on-resistance MOS switch
- Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor
- Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped
- Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered
- Small size, light weight, low standby current, is the ideal choice for your car model
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #15
WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module
Asin: B06X9D1PR9 | Model: WGCD | PartNumber: WGCD | Ean: 0602914545525 | UPC: 602914545525
Size: 43 * 43 * 27 Mm/1.69 * 1.49 * 1.06In.
Package: 5 Pcs L298n Motor Controller Board Module..
With Built-In 78M05 To Supply Power, To Avoid The Damage Of Voltage Regulator Chip, When The Driving Voltage Is Greater Than 12V, Please Use The External 5V Logic Power Supply..
Dual H Bridge Dc Stepper Module, More Stable And Higher Work Efficiency..
Features
- L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.
- Dual H bridge DC stepper module, more stable and higher work efficiency.
- Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in
- With built-in 78M05 to supply power, to avoid the damage of voltage regulator chip, when the driving voltage is greater than 12V, please use the external 5V logic power supply.
- Package: 5 pcs L298N motor controller board module.
- See more on Amazon...
Brand: WMYCONGCONG | Manufacturer: WGCD 1
Weight: 0.07 Pounds
See On Amazon #16
ACEIRMC 10pcs 1.5A 2 Way DC Motor Driver Module Speed Dual H-Bridge Replace Stepper L298N (Mini Controller Board)
Asin: B08GLQGQ8S | Model: 10544 | PartNumber: 10544 | Ean: 0701715445512 | UPC: 701715445512
Dual 1.5A * 2, The Peak Current To Be 2.5A, Built-In Thermal Protection Circuit, Do Not Be Afraid Motor Stall Burned, Automatic Recovery After The Temperature Dropped.
1.5A 2 Way Dc Motor Driver Module Speed Dual H-Bridge Replace Stepper L298n.
Minimal Heat, No Heat Sink, Small Size, Low Power Consumption, Is Ideal For Battery Powered.
Dual H-Bridge Motor Driver, Can Drive Two Dc Motors Or A 4-Wire Two-Phase Stepper Motor.
Features
- Use of imported original chip, built-in low on-resistance MOS switch
- Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor
- Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped
- Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered
- 1.5A 2 Way DC Motor Driver Module Speed Dual H-Bridge Replace Stepper L298N
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
See On Amazon #17
HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino
Asin: B07RNLG3HB
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Adopt Dedicated High-Power Motor Driver Chip L298p Which Can Directly Drive Two Dc Motors With Drive Current Up To 2A..
Stack Design Can Be Directly Plugged Into The Arduino, Easier To Use..
The L298p Shield Dc Motor Driver Has Pwm Speed Control Mode; Dual High-Power H-Bridge Driver..
Features
- Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
- The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- Stack design can be directly plugged into the Arduino, easier to use.
- Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
ShillehTek L298N Motor Driver Controller Board Module for Stepper Motor & DC Dual H-Bridge | Compatible with Raspberry Pi, Arduino, Smart Car Projects, Power UNO, MEGA R3, Mega2560
Asin: B0CW243ND1
[Wide Compatibility]: Seamlessly Integrates With Raspberry Pi, Arduino Uno, Mega, R3, Mega2560, And Other Microcontroller Platforms, Ensuring Your Projects Are Not Just Versatile But Also Innovative..
[User-Friendly]: Designed With Hobbyists And Professionals In Mind, The L298n Module Features Easy-To-Connect Terminals And Signal Inputs, Making Setup Quick And Straightforward, Even For Beginners..
[High-Voltage Operation]: Capable Of Operating At Voltages Up To 46V, This Motor Driver Can Handle A Substantial Current Load Of Up To 2A Per Channel, Providing The Power You Need For More Demanding Applications..
[Dual H-Bridge Design]: With Its Dual H-Bridge Configuration, This Module Allows For Independent Control Of Two Motors Simultaneously, Offering Both Direction And Speed Control For A More Dynamic And Flexible Operation..
Features
- [VERSATILE MOTOR CONTROL]: The ShillehTek L298N Motor Driver Controller Board is engineered for precision control of both stepper and DC motors, making it a perfect fit for a wide range of projects including smart cars, robotics, and automation systems.
- [DUAL H-BRIDGE DESIGN]: With its dual H-bridge configuration, this module allows for independent control of two motors simultaneously, offering both direction and speed control for a more dynamic and flexible operation.
- [WIDE COMPATIBILITY]: Seamlessly integrates with Raspberry Pi, Arduino UNO, MEGA, R3, Mega2560, and other microcontroller platforms, ensuring your projects are not just versatile but also innovative.
- [HIGH-VOLTAGE OPERATION]: Capable of operating at voltages up to 46V, this motor driver can handle a substantial current load of up to 2A per channel, providing the power you need for more demanding applications.
- [USER-FRIENDLY]: Designed with hobbyists and professionals in mind, the L298N module features easy-to-connect terminals and signal inputs, making setup quick and straightforward, even for beginners.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Robotlink
Weight: 0.01 Pounds
See On Amazon #19
Ferwooh 3PCS L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor
Asin: B0D17PJ2MS | Model: 41004 | PartNumber: 41004
Module Supply Voltage: 2.5-12V; With Fixed Mounting Holes, Diameter: 3Mm; Size: 28 X 21Mm / 11 X 8.3 Inch.
Package Include: 3X L9110s Dc Motor Drive Module Stepper Motor Drive Controller Board..
It Can Drive Two Dc Motors Or One 4-Wire 2-Phase Stepper Motor At The Same Time..
Maximum Operating Current:0.8A; Currently Most The Smart Car Voltage And Current Are All Within This Range..
Features
- Double L9110S chip motor drive.
- Maximum operating current:0.8A; Currently most the smart car voltage and current are all within this range.
- Module supply voltage: 2.5-12V; With fixed mounting holes, diameter: 3mm; Size: 28 x 21mm / 11 x 8.3 inch
- It can drive two DC motors or one 4-wire 2-phase stepper motor at the same time.
- package include: 3X L9110S DC Motor Drive Module Stepper Motor Drive Controller Board.
- See more on Amazon...
Brand: Ferwooh | Manufacturer: Ferwooh
See On Amazon #20
5PCS L298N Dual H-Bridge DC Stepper Motor Driver Module Controller Board
Asin: B0CJ9TJRD6 | Ean: 0749771527926 | UPC: 749771527926
Brand: senzooe | Manufacturer: senzooe
See On Amazon
Looking For Something Else?
Search