Ade Advanced Optics Python RD3-006x Green Dot Reflex Sight for Sig Sauer P365 Handgun Pistol, Black
Asin: B08BL6JM8D | Ean: 0640978388450 | UPC: 640978388450
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Huracan Rd3-006 Green Dot Reflex Sight. The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side..
3 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Shock/Fog Proof. It Is Rain Resistant, But Not Waterproof. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
The Handgun Mounting Plate Only Fits Sig Sauer P365 Base Model. It Does Not Fit P365xl Which Is Already Optics Ready. Ade Have A Different Plate Made To Fit P365xl That Allow Ade Rd3 Series And Other Doctor/Vortex Venom Type Red Dot To Be Able To Fit P365xl.
Features
- Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer P365 Handgun
- The handgun mounting plate only fits Sig Sauer P365 base Model. It does NOT fit P365XL which is already Optics Ready. ADE have a different plate made to fit P365XL that allow ADE RD3 series and other Doctor/Vortex Venom type red dot to be able to fit P365XL
- Huracan RD3-006 Green Dot Reflex Sight. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.
- Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year manufacturer
See On Amazon Similar To Ade Advanced Optics Python RD3006x
#1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 Pounds
Warranty: 1 year
See On Amazon #2
Ade Advanced Optics RD3-006A Green Dot Reflex Sight for Handgun
Asin: B071ZW79QJ | Model: rd3-006A | PartNumber: rd3-006A | Ean: 0640978348645 | UPC: 640978348645
However The Front Switch Of The Sight Needs To Trim Down 2Mm Depends On Exact Pistol Model If The Pistol's Pre-Cut Is Very Short...
Ade Rd3 006,Rd3 009,Rd3 012,Rd3 013,Rd3 015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight..
Comes With An Removable Picatinny Mounting Base To Attach To Any Thing With Piatinny Rail. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery.
This Huracan Green Dot Sight Fits Directly To Optics Ready Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided Mount Marked For Doctor/Venom Type Red Dot..
Features
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
- However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
- Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
- ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
See On Amazon #3
Ade Advanced Optics Huracan Green Dot Reflex Sight for Handgun - Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B071JHZXFS | Model: rd3-006A-HURACAN | PartNumber: rd3-006A-HURACAN | Ean: 0640978348652 | UPC: 640978348652
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight.Rd3-011 Only Fits Trijicon Ftprt.
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail..
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.This Green Dot Comes With A Picatinny Mounting Base. Other Handgun Mounting Plates Are Not Included..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
Warranty: 1 year manufacturer
See On Amazon #4
Ade Advanced Optics RD3-009-2 Red Dot Sights
Asin: B00OJHL5RC | Model: RD3-009-2 | PartNumber: RD3-009-2 | Ean: 0710500199165 | UPC: 710500199165
This Red Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.45 Pounds
Warranty: 1 year
See On Amazon #5
Ade Advanced Optics RD3-021-PRO NUWA-PRO Motion Awake Green Reticle Dot Sight for Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC/Mete MC9, Mossberg MC2SC, Kimber R7 Mako
Asin: B0B4F9VJCK | Model: RD3-021 PRO | PartNumber: RD3-021 PRO | Ean: 0640978407571 | UPC: 640978407571
With Motion Activated System, While The Nuwa Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. Operates With A Single Cr1632 Battery. 6 Daylight Brightness Setting And 1 Nv Setting. The Night Vision Dot Is Not Visible By The Human Eye, It Is Can Only Be Seen Thought A Night Vision. Battery Life Up To 10000 Hours..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With The Adjustment Tool, User Manual, Lens Cloth, Red Dot Cover, Cr1632 Battery, Screws. Parallax-Free & Unlimited Eye Relief. Made Of Aircraft Aluminum In Anodized Black Finish With Multi-Coated Lens. Weight Approximately 15.5 Grames(0.55Oz), (Length)1.5" X (Width)..88" X (Height).89".
Ade Nuwa Pro Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight..
Designed To Fit Canik Elite Tp9 Sc, Canik Mete Sfx, Canik Mete Sft, Mete Mc9, Sig P365x/P365xl/P365xl Spectre Comp, Ruger Max-9, Glock 43X Mos/48 Mos(Not Compatible With Regular Glock 43X/48 That Are Not Mos), Springfield Hellcat Osp, S&W Shield 2.0 Optics Ready, S&W Mp9 Ez, S&W M&P Shield Plus Performance Center, Walther Pps M2 Optics Ready, Girsan Mc1911sc Ultimate Or Any Pistol/Mounting Plate/Slide With Rms/Rmsc Screw Pattern/Footprint..
The Nuwa Pro Has A Fixed 66 Moa Circle With 3 Moa Dot(Cannot Switch Between). It Is One Of The Lightest Weight And Smallest Rms Footprint Green Dot With Full Metal Construction, Top Battery Loading And Motion Awake Function.
Features
- ADE is releasing several Pro Series red dots. This 2023 PRO SERIES for ADE RD3-021(2022-present) Nuwa green dot is called NUWA PRO(RD3-021PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology. This ADE NUWA PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
- The NUWA PRO has a fixed 66 MOA Circle with 3 MOA Dot(cannot switch between). It is one of the lightest weight and smallest RMS footprint green dot with full metal construction, top battery loading and Motion Awake function
- With Motion Activated System, while the NUWA PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Operates with a single CR1632 battery. 6 daylight brightness setting and 1 NV setting. The Night Vision Dot is not visible by the human eye, it is can only be seen thought a Night Vision. Battery life up to 10000 hours.
- Ade Nuwa PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR1632 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 15.5 grames(0.55oz), (Length)1.5 x (Width)..88 x (Height).89
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 Pounds
See On Amazon #6
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN4QYK1
5 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install. Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.60 Pounds
See On Amazon #7
ADE RD3-012-PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0B3SCJ98C | Model: RD3-012PRO-RED | PartNumber: RD3-012PRO-RED
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 Pounds
See On Amazon #8
Ade Advanced Optics RD3-012-G-1 6moa Green Dot Sight for Handgun Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B07X93Z846
This Ade Red Dot Is Not Compatible With Optic Plate/Slide/Cut For Trijcon Rmr/Shield/Holosun 407 Type Footprint. It Only Compatible With Footprint Made For Vortex Venom/Burris Fastfire Type Red Dot Plate/Footprint. Top Load System, No Need To Remove The Sight To Change The Battery That Requires Re-Sight In And Waste Ammo..
For Non-Optics Handgun,User Need To Purchase After Market Optic Plate Made Specifically For That Pistol To Replace The Rear Sight.This Green Dot Comes With A Removeable Picatinny Plate Only. 6 Moa Dot. Come With Protected Cover, Adjustment Wrench, Adjustment Dailing Plate, User Manual And Picatinny Mounting Plate. Additional Mounting Plates For Hunguns Sells Separately.
Green Dot Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same Brightness Level Last Time It Was Turned Off.
Fits Glock Mos System Such As Gen4 17,19,34,40,41,35 And Gen4 17,19,34. It Does Not Fit Standard Glock, Or Glock With A Aftermarket Slide.If You Have An Aftermarket Glock Slide, Please Ask The Slide Manufacturer What Exact Optic Cut They Put On Their Glock Slide And Let Us Know For Us To Confirm Which Red Dot Fits.User Need To Contact Pistol Manufacturer To Obtain The Optic Plate For Optic Ready Handgun..
Features
- This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off
- Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have an aftermarket Glock slide, please ask the slide manufacturer what exact optic cut they put on their glock slide and let us know for us to confirm which red dot fits.User need to contact pistol manufacturer to obtain the optic plate for OPTIC READY handgun.
- This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint made for Vortex Venom/Burris Fastfire type red dot plate/footprint. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.
- GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
- For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes with a removeable Picatinny plate ONLY. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #9
Ade Advanced Optics RD3-018-SC Spike Green Dot Sight for Springfield Hellcat OSP/PRO, Mossberg MC2SC, Ruger Max-9, Kimber R7 Mako and Canik TP9 Elite SC - NOT Red Dot
Asin: B09V6NCQ7G | Model: RD3-018G-SC | PartNumber: RD3-018G-SC
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Designed To Fit Canik Elite Tp9 Sc, Canik Mete Sfx, Canik Mete Sft, Sig P365xl/P365x, Ruger Max-9, Glock 43X Mos/48 Mos(Not Compatible With Regular Glock 43X/48 That Are Not Mos), Springfield Hellcat Osp, S&W Shield 2.0 Optics Ready, S&W Mp9 Ez, S&W M&P Shield Plus Performance Center, Walther Pps M2 Optics Ready, Girsan Mc1911sc Ultimate Or Any Pistol/Mounting Plate/Slide With Rms/Rmsc Screw Pattern/Footprint..
Features
- This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 Pounds
See On Amazon #10
Ade Advanced Optics RD3-006B-2 Green Dot Sight for Handgun - Compatible with Doctor/Venom/Fastfire Footprint Red Dot
Asin: B08FSQ7Y73
This Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
4 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- 4 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #11
Ade Advanced Optics Python Green Dot Reflex Sight for Handgun - Compatible with Doctor Footprint
Asin: B074ZVCTXB | Model: rd3-006x-1 | PartNumber: rd3-006x-1 | Ean: 0640978398466 | UPC: 640978398466
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery(Included).
The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side. 3 Moa. 5 Illumination Settings.
Features
- The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
Warranty: 1 year
See On Amazon #12
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun with Removeable Pictinny Base
Asin: B08FSTLT1Z | Ean: 0640978407380 | UPC: 640978407380
This Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Newly updated front switch designed in Oregon.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #13
Ade Advanced Optics Huracan Green Dot Micro Sight for Handgun with Doctor Footprint- FDE/TAN Body Color
Asin: B09GTLNV2Q
4 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Comes With Cr2032battery, Protective Cover, M3x6mm Screws For Connecting To The Provided Picatinny Plate, Picatinny Plate, Lens Cloth, Wheel Dial Reference Tool, Allen Wrench, Screw Driver, Anti-Flickering Robber Shim..
While It Is Possible To Install The Optic To Handgun Without The Use Of A Gunsmith, We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Venom, Fastfire,Meopta,Docter,Insight,.Any Plate Made For Those Brands Also Fits This Sight.Rd3-018 Only Fits Rms/Rmsc Footprint. Rd3-019,Rd3-020,Rd3-023 Fits Rmr Footprint.
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
This Ade Rd3-006B Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates(Sold Separately) That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp, Taurus Toro Using Pistol Manufacturer Provided Optic Mounting Plate(Sold Separately)..
Features
- This FDE/TAN body color Green Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADE s popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADE s FDE color will not 100% match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter.
- This ADE RD3-006B GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY).
- 4 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Venom, Fastfire,Meopta,Docter,Insight,.Any Plate made for those brands also fits this sight.RD3-018 only Fits RMS/RMSC footprint. RD3-019,RD3-020,RD3-023 fits RMR footprint
- Comes with CR2032battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim.
- While it is possible to install the optic to handgun without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
See On Amazon #14
Ade Advanced Optics RD3-023 Shake Wake Valkyrie 4 MOA GREEN Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.
Asin: B09BQ17K85
The Valkyrie Gen 2 Also Fits Name Brand Pistol Manufacturer Made Optics Ready Pistols, Such As Glock Mos, S&W M&P 2.0 Op, Iwi Masada, Smith Wesson Mp C.O.R.E, Cz P10f/10C Optics Ready, Walther Q5 Match And Springfield Xd/Xdm/Xds Osp, Canik Tp9 Sfx/Combat, Fn 509/45 Tactical, Shadow Systems Mr 920 Using Pistol Manufacturer Provided Plate Marked For Trijicon Rmr Footprint..
4 Moa Green Dot. Comes With A Picatinny Mounting Plate And A Pair Of Screws. This Red Dot Does Not Comes With Any Other Optic Plate To Mount On An Specific Pistol.
Operates With A Single Cr2032 Battery(Install Underneath). Gives Around 800 Hour Battery Life. Auto Powers Off After 1 Hour Of Inactivity To Save Battery.Dimension 1.79X1.18X1.4 Inches. Weight 1.24 Oz. Shockproof/Fogproof.
Ade Valkyrie Created A Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A "Back Up Iron Sight" To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacture Equipped Rear Sight, Ade Valkyrie's Rear White Dot Acts As A Pistol Factory Original Rear Sight For Co-Witness.
Those Name Brand Pistol Manufacturer Made "Optics Ready" Handguns All Come With Several Mounting Plates/Optic Cuts Marked For Different Brands Of Red Dots, Such As For Trijicon Rmr, Shield Rms And Vortex Venom Red Dot Footprint. The Valkyrie Fits One Of The Pistol Manufacturer Provided Plate Marked That Is Compatible With Trijicon Rmr..
This Model Is The Original Ade Valkyrie, Ade Also Have A Ade Valkyrie Gen2. The Difference Between Ade Valkyrie And Ade Valkyrie Gen2 Is That The Gen2 Is Slightly Shorter In Overall Length, And The Shorter Length Allows Gen2 To Sit Into Custom Rmr Cut, While Original Valkyrie Only Fits Optic Plate For Rmr Footprint..
Ade Rd3-023 Valkyrie Is A 4 Moa Green Dot Designed To Fit Any Pistol With A Pistol That Is Compatible With Rmr/Sro, Holosun 407C/507C/508T Footprint Red Dots. The Valkyrie Fits All Pistol With Optic Cuts For Trijicon Rmr/Sro, Including Aftermarket Slide Such As Rockslides, Polymer80 That Has A Optic Cut For Trijicon Rmr/Sro..
Features
- ADE is now adding Motion Awake/Shake and Wake feature to RD3-023 Valkyrie green dot. All customer purchased this green dot on or after July 31st 2023, will receive the Pro version of RD3-023 that is Motion Awake.
- ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO.
- The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint.
- Those name brand pistol manufacturer made Optics Ready handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.
- ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness
- 4 MOA GREEN Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol
- Operates with a single CR2032 battery(install underneath). Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. Shockproof/Fogproof
- This model is the original ADE Valkyrie, ADE also have a ADE Valkyrie Gen2. The difference between ADE Valkyrie and ADE Valkyrie Gen2 is that the Gen2 is slightly shorter in overall length, and the shorter length allows Gen2 to sit into custom RMR cut, while original Valkyrie only fits optic plate for RMR footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.08 Pounds
See On Amazon #15
Ade Advanced Optics RD3-002 Compact Red Dot Sight with Integral Weaver-Picatinny Mount
Asin: B00BF6PNQE | Ean: 0717029486134 | UPC: 717029486134
Unlimited Eye Relief, 2 Moa Red Dot, Polished/Coated Lenses, Parallax Free. Anodized Aluminum Body. Led (Light Emitting Diode).
Fully Multi-Coated: Multiple Anti-Reflective Coatings On All Air-To-Glass Surfaces Increase Light. Rd3-002 Is Not Recommended For Heavy Recoil Firearm..
Manual Power Switch At Rear End. Off/Low/High. Only Weight 1.9Oz With Battery Installed..
The Build-In Picatinny Mount Can Not Be Removed And Replace With A Handgun Mounting Plate. For Red Dot Sight Made To Attach Pistol Mounting Plate Such As Optics Ready Pistols, Or Mounting Plates To Replace Rear Sight, Please See Ade’S Other Models Such As Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015.
Features
- ADE Rd3-002 red dot is the entry level red dot that comes with a built-in/non removeable picatinny base. It can only be mounted on the pistols that has a picatinny rail on top. It does NOT works with pistols that does NOT has a picatinny rail on top.
- The Build-in picatinny mount CAN NOT be removed and replace with a handgun mounting plate. For red dot sight made to attach pistol mounting plate such as Optics Ready pistols, or mounting plates to replace rear sight, please see ADE s other models such as RD3-006,RD3-009,RD3-012,RD3-013,RD3-015
- Unlimited Eye Relief, 2 MOA Red Dot, Polished/Coated lenses, Parallax Free. ANODIZED ALUMINUM BODY. LED (LIGHT EMITTING DIODE)
- Manual power switch at rear end. Off/Low/High. Only weight 1.9oz with battery installed.
- Fully Multi-Coated: Multiple anti-reflective coatings on all air-to-glass surfaces increase light. RD3-002 is Not recommended for heavy recoil firearm.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.12 Pounds
Warranty: 1 year
See On Amazon #16
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount for ADE ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
Asin: B08L5JD9SS
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #17
Ade Advanced Optics RD3-030/APOLLO-PRO Sensor Activated, Solar Powered 4 MOA Red Dot Sight for Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC, Mossberg MC2SC, Kimber R7 Mako
Asin: B0BM56M5FM
The Apollo Pro Is Always Powered On And Features An Auto-Dimming Sensor Which Regulates Proper Dot Brightness Based On Ever Changing Ambient Light Conditions. The Brightness Will Turn High And Low Accordingly To The Environment Brightness. Operates With A Single Cr2032 3V Battery. There Is No Physical On/Off/Brightness Button. The Sensor Does It All..
Comes With The Adjustment Tool, User Manual, Lens Cloth, Red Dot Cover, Cr2032 Battery, Screws. Parallax-Free & Unlimited Eye Relief. Made Of Aircraft Aluminum In Anodized Black Finish With Multi-Coated Lens. Weight Approximately 17.5 Grames(0.61Oz), (Length)1.6" X (Width)1" X (Height).9". The Objective Lens Is 22Mmx16m/0.87"X0.63".
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Apollo Pro Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight..
Equipped With Solar Power That Allows The Red Dot Sight To Continue To Be Powered When Your Battery Is Out. The Battery Life Can Last Up To 50,000 Hours Depending On Settings..
Features
- ADE is introducing all new APOLLO PRO(RD3-030PRO). This ADE APOLO PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
- Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.
- The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical on/off/brightness button. The sensor does it all.
- Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.
- Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames(0.61oz), (Length)1.6 x (Width)1 x (Height).9. The objective lens is 22mmx16m/0.87x0.63
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 Pounds
Warranty: 1 year manufacturer
See On Amazon #18
Ade Advanced Optics Cobra RD3-006X-1 Green Dot Sight - Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B072MB9N6P | Model: rd3-006x-2 | PartNumber: rd3-006x-2 | Ean: 0640978348669 | UPC: 640978348669
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery(Included).
The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side. 3 Moa. 5 Illumination Settings.
Features
- The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
Warranty: 1 year
See On Amazon #19
Ade Advanced Optics HG54R-1 Universal Laser Sight, Red
Asin: B071F9DJZM | Model: hg54R-1 | PartNumber: hg54R-1 | Ean: 0640978348584 | UPC: 640978348584
Proprietary Mounting Design Provides Two Spring Loaded Pillar To Push To Rail Slot For Rock Solid Zero Movement. Weight: 1.13Oz (Battery Included). Does Not Fits Berreta Due To Extra Wide Trigger Guard..
Controlled By Ambidextrous Switch. It Offers Two Modes: Constant-On And Strobe. This Allows The User To Easily Set Their Mode Based On Personal Need Or Preference.
Operates With One Cr1/3N Batteries(Included). Battery Life: 1 Hours. The Unit Is Quickly And Easily, User-Installed In Moments And Can Be Painlessly Transferred From Firearm To Firearm.
Fit Rail-Equipped Pistols, Rifles And Shotguns. The Laser Sight Fits Onto Virtually Any Firearm With A Modern (M1913 Pica Tinny Or Weaver-Style) Accessory Rail.
Features
- Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
- Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
- Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included). Does NOT fits Berreta due to extra wide trigger guard.
- Operates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
- Controlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 Pounds
See On Amazon #20
ADE Zantitium (RD3-015 PRO) PRO Series Motion Awake (Sensor Activated) Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0BWGFJ9DV
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year warranty
See On Amazon
Looking For Something Else?
Search