ADE 2023 RD3-012-PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0B3SCJ98C | Model: RD3-012PRO-RED | PartNumber: RD3-012PRO-RED
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 pounds
See On Amazon Similar To ADE 2023 RD3012PRO Series Motion
#1
ADE RD3-012PRO Motion Awake(Sensor Activated) System Red Dot with 2MOA Dot and 32 MOA Circle Multi Reticle Reflex Sight for Handgun That is Compatible with Doctor Footprint
Asin: B0BWG6VVPW | Model: RD3-012-PRO-Red Dot Sight | PartNumber: RD3-012-PRO-Red Dot Sight
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year warranty
See On Amazon #2
ADE Pro Series Motion Activated System RD3-012-PRO Red Dot with 2 MOA Dot and 32 MOA Circle Multi Reticle System - IP7 Waterproof
Asin: B0B3SDWHJF | Model: RD3-012-PRO-1 | PartNumber: RD3-012-PRO-1
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.50 pounds
See On Amazon #3
ADE 2023 RD3-015-PRO Zantitium PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0B3SG9Z8Q | Model: RD3-015PRO-RED | PartNumber: RD3-015PRO-RED
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Please Keep In Mind This Red Dot Might Look Bulky When Installed On Some Micro-Compact Handguns..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Please keep in mind this red dot might look bulky when installed on some Micro-Compact handguns.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #4
Ade Advanced Optics RD3-012PRO Motion Activated System Red Dot with 2MOA Dot and 32 MOA Circle Multi Reticle Reflex Sight for Handgun
Asin: B0B3SF2YJH | Model: RD3-012PRO | PartNumber: RD3-012PRO
The Ade Delta Pro(D3-012Pro) Has Motion Activated System. While Delta Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting..
1.75" Length X1.25" Width X1.15" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate/Cut That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Optic Plate/Cut For Rmr, Shield Rms Type Footprints..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-012(2016-present) Delta red dot called Delta PRO(D3-012PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate/cut that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit optic plate/cut for RMR, Shield RMS type footprints.
- The ADE Delta PRO(D3-012PRO) has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon
Looking For Something Else?
Search