ADE RD3-015-PRO Zantitium PRO Series Motion Activated Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0B3SG9Z8Q | Model: RD3-015PRO-RED | PartNumber: RD3-015PRO-RED
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Please Keep In Mind This Red Dot Might Look Bulky When Installed On Some Micro-Compact Handguns..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Please keep in mind this red dot might look bulky when installed on some Micro-Compact handguns.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon Similar To ADE RD3015PRO Zantitium PRO Series
#1
ADE Zantitium (RD3-015 PRO) PRO Series Motion Awake (Sensor Activated) Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0BWGFJ9DV
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year warranty
See On Amazon #2
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Ruger SR22 Pistol
Asin: B07VDGQYNB
Ade Advanced Optics Model Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Are Designed To Fit The Slide/Footprint Of Mounting Plate Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech Mrds, Sightmark Minishot. Therefore Ade Red Dots Are Compatible For Varieties Of Handguns With Appropriate Plate That Is Made For Any Of Those Brands..
4 Moa Dot.Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Promotes Rapid Target Acquisition While Providing A Precise Point Of Aim; Getting Shots Down Range And On Target Fast. Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo..
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Battery(Included).
Features
- Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight that replaces the rear sight dovetail of SR22 Pistol and also a standard picatinny mount.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included)
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #3
ADE Pro Series Motion Activated System IP7 Waterproof Zantitium PRO(RD3-015-PRO) Red Dot with 2 MOA Dot and 32 MOA Circle Multi Reticle System
Asin: B0B3SD32BR | Model: RD3-015PRO | PartNumber: RD3-015PRO | Ean: 0640978407649 | UPC: 640978407649
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #4
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Springfield XD Pistol
Asin: B07VCGT28V
Ade Advanced Optics Model Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Are Designed To Fit The Slide/Footprint Of Mounting Plate Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech Mrds, Sightmark Minishot. Therefore Ade Red Dots Are Compatible For Varieties Of Handguns With Appropriate Plate That Is Made For Any Of Those Brands..
4 Moa Dot.Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Promotes Rapid Target Acquisition While Providing A Precise Point Of Aim; Getting Shots Down Range And On Target Fast. Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo..
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Battery(Included).
Features
- Comes with mounting plate that replaces the rear sight dovetail of Springfield XD and also a standard picatinny mount. Does NOT fits XDS, XDM.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included)
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #5
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Berreta Pistol
Asin: B07VBBF1P9
This Mount Does Not Fit (Including But Not Limited To): Beretta 92 Optics Ready Models,92 Fs Centennial,92 Performance,92 Performance Defensive,92 Rdo Compact Y22,M9 A4 Centurion Y22,Taurus 92,.
Promotes Rapid Target Acquisition While Providing A Precise Point Of Aim; Getting Shots Down Range And On Target Fast. Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo..
Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision..
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Battery(Included).
Ade Advanced Optics Model Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Are Designed To Fit The Slide/Footprint Of Mounting Plate Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech Mrds, Sightmark Minishot. Therefore Ade Red Dots Are Compatible For Varieties Of Handguns With Appropriate Plate That Is Made For Any Of Those Brands..
New Advanced Battery Technology Gives Up To 3000 Hours On Bright Setting And Up To 40K Hours On Low Setting With A 2032 Battery(Included). Top Load System, No Need To Remove The Sight To Change The Battery..
This Mount Fits: Beretta 92 Fs,92 G,92 Fs Fusion,92 Fusion Black,92 Fusion Blu,92 Fs Inox,92 A1,92 Fs Brigadier,92 Fs Brigadier Inox,92 G Elite,92 Compact,92 Compact W/ Rail,92 Compact With Rail Inox,92 Vertec Inox,92G-Sd,92X Centurion,92X Compact,92X Compact W/ Rail,92X Full Size,98 A1,98 Fs,90 Series Inox,M9, M9 Exclusive,M9a1,M9a3,M9a3 Black,98 Fs Inox,M9 22Lr.
Features
- Comes with mounting plate that replaces the rear sight dovetail of BERRETA and also a standard picatinny mount.
- This mount fits: Beretta 92 FS,92 G,92 FS Fusion,92 Fusion Black,92 Fusion Blu,92 FS Inox,92 A1,92 FS Brigadier,92 FS Brigadier Inox,92 G Elite,92 Compact,92 Compact w/ Rail,92 Compact with Rail Inox,92 Vertec Inox,92G-SD,92X Centurion,92X Compact,92X Compact w/ Rail,92X Full Size,98 A1,98 FS,90 Series Inox,M9, M9 Exclusive,M9A1,M9A3,M9A3 Black,98 FS Inox,m9 22lr
- This mount does not fit (including but not limited to): Beretta 92 Optics Ready Models,92 FS Centennial,92 Performance,92 Performance Defensive,92 RDO Compact Y22,M9 A4 Centurion Y22,Taurus 92,
- New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a 2032 Battery(Included). Top load system, no need to remove the sight to change the battery.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included)
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
- Every time you turn on the dot it stays the same b rightness level last time it was turned off. The lowest setting is invisible by human eye that is for using with a Night Vision.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
Ade Advanced Optics RD3-015PRO Zantitium PRO Motion Activated Red Dot with 2MOA Dot and 32 MOA Circle Multi Reticle Reflex Sight for Handgun
Asin: B0B3SFR4Y6 | Model: RD3-015PRO-1 | PartNumber: RD3-015PRO-1
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #7
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Sig Sauer Standard P320 Handgun Pistol
Asin: B087QTBX2F
Zantitium Rd3-015 Red Dot. New Advanced Battery Technology Gives Up To 3000 Hours On Bright Setting And Up To 40K Hours On Low Setting With A Cr2032 Battery(Included).
Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo.4 Moa Dot.Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height.(For Reference, Vortex Venom Is 1.9Lx1.11Wx1.02H). It Gives Up To Twice Bigger Window Than Other Micro Red Dot..
The P320 Plate That Comes With This Listing Only Fits Standard P320. It Does Not Fit Special Edition Like Xcarry, X-5, Xcompact And M17.
Features
- Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer STANDARD P320 Handgun
- The P320 Plate that comes with this listing Only fits standard P320. It does NOT fit special edition like XCarry, X-5, XCompact and M17
- Zantitium RD3-015 Red Dot. New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a CR2032 Battery(Included)
- The biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height.(For reference, vortex venom is 1.9Lx1.11Wx1.02H). It gives up to twice bigger window than other micro red dot.
- Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #8
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Ruger 10/22, Black
Asin: B086FT1QH4 | Ean: 0640978388498 | UPC: 640978388498
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Coin Battery(Included).Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Ade Contract Factory Is Already Supplying For Other Name Brands That Retails For 2-3 Times More..
Waterproof/Shockproof/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Top Load System, No Need To Remove The Sight To Change The Battery. 4 Moa Dot. Come With Protected Cover, Adjustment Wrench, Adjustment Dialing Plate, User Manual, Installation Screws And Picatinny Mounting Plate..
Features
- Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount.
- Top load System, no need to Remove the sight to change the Battery. 4 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Coin Battery(Included).Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- ADE contract factory is already supplying for other name brands that retails for 2-3 times more.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year manufacturer
See On Amazon #9
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Sig Sauer P226 P2022 Pistol
Asin: B07VBBDPXV
Ade Advanced Optics Model Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Are Designed To Fit The Slide/Footprint Of Mounting Plate Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech Mrds, Sightmark Minishot. Therefore Ade Red Dots Are Compatible For Varieties Of Handguns With Appropriate Plate That Is Made For Any Of Those Brands..
4 Moa Dot.Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Promotes Rapid Target Acquisition While Providing A Precise Point Of Aim; Getting Shots Down Range And On Target Fast. Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo..
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Battery(Included).
Features
- Comes with mounting plate that replaces the rear sight dovetail of Sig P226, P2022 and also a standard picatinny mount. The plate does NOT fits other Sig models such as P320 and P360
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included)
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #10
Ade Advanced Optics ZANTITIUM PRO RD3-015 PRO Motion Awake, Multi Reticle Red Dot + Optic Mounting Plate for SW MP 9 Shield EZ and Shield EZ 30 Super Carry Pistol + Standard Picatinny Mount
Asin: B0CDFJC58R | Model: RD3-015 PRO | PartNumber: RD3-015 PRO
The Ade Zantitium Pro Has Multi Reticle System. The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint..
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
Features
- This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Smith Wesson SW MP 9 Shield EZ and Shield EZ 30 Super Carry pistol by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as 380 EZ. ADE offers plates for several other models. Please search or contact us with any fitment question. Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install.
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The ADE Zantitium PRO has Multi Reticle System. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: If you encounter any problems during use, you can contact us at any time, we will serve you wholeheartedly
See On Amazon #11
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for HK USP Pistol
Asin: B07VFKV6XS
Ade Advanced Optics Model Rd3-006, Rd3-009, Rd3-012, Rd3-013, Rd3-015 Are Designed To Fit The Slide/Footprint Of Mounting Plate Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech Mrds, Sightmark Minishot. Therefore Ade Red Dots Are Compatible For Varieties Of Handguns With Appropriate Plate That Is Made For Any Of Those Brands..
4 Moa Dot.Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Promotes Rapid Target Acquisition While Providing A Precise Point Of Aim; Getting Shots Down Range And On Target Fast. Top Load System, No Need To Remove The Sight To Change The Battery And Re-Sight In To Waste Ammo..
New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Battery(Included).
Features
- Comes with mounting plate that replaces the rear sight dovetail of HK USP and also a standard picatinny mount. The HK USP dovetail has two popular width, one is 12mm, another size is 10mm. This plate fits 12mm dovetail, it does NOT fit the 10mm dovetail unless you grind/file it. Please MEASURE before purchasing. Below is a list of HK USP models come with both size 10mm and 12mm dovetails. HK made the different sizes over different production run. Need to confirm before purchasing. .
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included)
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon
Looking For Something Else?
Search