Fulament 3D Resin Flex Plate | Fits Anycubic Mono X, Mono X2, Photon X, & Photon Mono X 6K | Fula-Flex: Resin Edition | Stainless Steel Magnetic Bed Platform | 202 x 128
Asin: B08M4997FH | Model: Ful-rfp-202128 | PartNumber: Ful-rfp-202128 | Ean: 0793519688448 | UPC: 793519688448
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[ Why Fulament ] - Unlike Other Resin Flex Plates Who Use Spring Steel, We Use A Spring Tempered Magnetic Grade Of Stainless Steel. Ensuring That The Resin Sheets Will Never Corrode Or Stop Flexing. Our Magnet Is Also Thicker, Preventing Pre-Mature Flex Plate Removal Or Sliding! Fulament's 3D Printer Base Sheet Is Designed To Outlast Your 3D Printer!.
[ Fulament's Promise ] - Fulament Is A Usa-Based Company. Our Products Are Made By Enthusiasts For Enthusiasts. We Know You'll Love Our 3D Printer Bed Mat As Much As We Do. All Our Products Feature A 12-Month Warranty Plus Knowledgeable Tech Support. If You Have Any Kind Of Question Or Problem Regarding Our Product, Feel Free To Contact Us, And We Will Be Happy To Assist You Shortly. “Fulament” Is A Trademark Registered Brand.
[ Compatibility ] - This 202Mm X 128Mm Resin Plate Fits Anycubic Mono X, Anycubic Photon X, Anycubic Photon Mono X, Anycubic Photon Mono X 6K, Smart Kumitsu Kl9.
[ Easy To Remove Prints ] - Keeping Our Customers’ Needs In Mind, We Built A 3D Printer Build Plate That Increases Printing Success. Our 3D Printing Mat Grips The Models Tightly During The Printing And Releases The Prints Easily Without Damaging The Part Or The Build Plate.
Features
- [ EASY TO INSTALL ] - Fulament s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from the adhesive, and attach the magnet to the build plate. Once you ve finished printing, remove the stainless steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet! Prints are easily removed without any scratches or damage
- [ EASY TO REMOVE PRINTS ] - Keeping our customers needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing mat grips the models tightly during the printing and releases the prints easily without damaging the part or the build plate
- [ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the resin sheets will never corrode or stop flexing. Our magnet is also thicker, preventing pre-mature flex plate removal or sliding! Fulament's 3D printer base sheet is designed to outlast your 3D Printer!
- [ COMPATIBILITY ] - This 202mm x 128mm resin plate fits Anycubic Mono X, Anycubic Photon X, Anycubic Photon Mono X, Anycubic Photon Mono X 6K, Smart Kumitsu KL9
- [ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed mat as much as we do. All our products feature a 12-month warranty PLUS knowledgeable tech support. If you have any kind of question or problem regarding our product, feel free to contact us, and we will be happy to assist you shortly. FULAMENT is a Trademark Registered Brand
- See more on Amazon...
Brand: Fulament | Manufacturer: Fulament
See On Amazon Similar To Fulament 3D Resin Flex Plate
#1
Fulament Fula-Flex Textured PEI PRO - 40% Better Adhesion than PEI - Creality Ender 3 / V2, Elegoo Neptune 3/3 Pro / 4/4 Pro, Kobra 2 Pro / 2 Neo, Ender 5 Flex Plate Build Sheet Compatible | 235 x 235
Asin: B0C6V4CXPD | Ean: 0683770222959 | UPC: 683770222959
Quick And Easy Print Removal - Hassle-Free Experience: When Your Print Is Complete, Just Flex. No Scrapers, No Damaged Parts, No Sticking Your Plate In The Freezer. Just Flex And Enjoy Your Print..
Fula-Flex Comes In Over 80 Sizes, Ensuring Compatibility With Almost Every Printer On The Market!.
Fulament Is A Florida & Nyc Based Company, And Have Sold Over 100,000 Flex Plates. All Our Products Are Backed By A 1 Year Warranty. Have Trust That A) The Product Will Work Well And B) That We’Ll Be There For You If Something Goes Wrong..
Adhesion Across Materials: Fula-Flex 3.0 Features Strong Adhesion For All Common 3D Printing Materials Including Pla, Abs, Petg, Tpu, Nylon, & Pc..
Features
- PEI PRO - Bed Adhesion Fixed: Start a print with confidence, leaving the build plate unattended without worrying about the common failures caused by poor bed adhesion. By eliminating 99% of these printing failures, Fula-Flex 3.0 ensures a reliable and stress-free printing experience for users.
- Adhesion Across Materials: Fula-Flex 3.0 features strong adhesion for all common 3D Printing materials including PLA, ABS, PETG, TPU, Nylon, & PC.
- Quick and Easy Print Removal - Hassle-Free Experience: When your print is complete, just flex. No scrapers, no damaged parts, no sticking your plate in the freezer. Just flex and enjoy your print.
- Fulament is a Florida & NYC based company, and have sold over 100,000 flex plates. All our products are backed by a 1 year warranty. Have trust that a) the product will work well and b) that we ll be there for you if something goes wrong.
- Fula-Flex comes in over 80 sizes, ensuring compatibility with almost every printer on the market!
- See more on Amazon...
Brand: Fulament | Manufacturer: Fulament
Weight: 0.50 pounds
See On Amazon #2
KOYOFEI 2PCS Resin 3D Printer Platform, Building Plate and Magnetic Sheet, Flexible Steel Plate Flex Bed for Elegoo Saturn S, Anycubic Photon Mono X, Mono X 6K, M3 Plus 3D Printer 202 x 128 mm
Asin: B09KXYRGX9
Size Information: The Size Of The Magnetic Steel Plate Is 202 * 128Mm, And The Thickness Of This Platform Is 3-4Mm, Compatible With Anycubic Photon Mono X, Mono X 6K, M3 Plus, Saturn S. Due To The Thickness Of The Product Itself, The Printable Height Of The 3D Printer Will Shrink By 3-4Mm. At The Same Time, After Installing The Magnetic Printing Platform, You Will Need To Re-Leveling The 3D Printer For Excellent Printing Results..
Installation Tips: First Clean Your Build Plate Very Well, Let It Dry, Connect Your Magnet To The Plate, Let It Sit For A While So It Is Fully Seated, Then Install The Spring Steel Plate On The Magnetic Base, Last Reset The Printer's Leveling Settings To Start Printing ..
Unique Handle Design: The Magnetic Printing Platform Is Equipped With A Handle That Makes It Easy To Install And Remove The Magnetic Printing Platform..
Robust And Durable Stainless Steel Material: The Magnetic Printing Platform Is Made Of High Quality Stainless Steel Material And Has Good Elasticity. After Bending And Removing The Model, It Can Be Quickly Returned To Its Original State And Reused..
Features
- Flexible and Magnetic Platform: The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from falling off during printing.
- Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its original state and reused.
- Size information: The size of the magnetic steel plate is 202 * 128mm, and the thickness of this platform is 3-4mm, compatible with Anycubic Photon Mono X, Mono X 6K, M3 Plus, Saturn S. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 3-4mm. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing .
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
See On Amazon #3
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm
Asin: B08LYP2VTT
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #4
BIQU Resin Magnetic Flexible Steel Plate, 150x95mm Flex Bed Build Plate Compatible with Elegoo Mars 3 SLA LCD Resin 3D Printer
Asin: B0B3T15P4V | Model: 301020000 | PartNumber: 301020000
🧡【Strong Adhesion】The Surface Of The Resin Steel Plate Is Treated With Special Wire Drawing, Which Has A Stronger Adsorption Force, So That The Model Can Be Better Adsorbed.
🧡【24 Months Longer Warranty】All Components Are Rigorously Tested Before Shipment. We Will Provide A Long-Term Warranty Service Of Up To 24 Months (Normal Warranty Period Is 12 Months). We Will Respond Promptly Within 12 Hours Within One Working Day. Any Questions, Please Feel Free To Write To Us..
🧡【High Durability】The Resin Steel Plate Is Made Of Spring Steel Imported From The United States, With Good Flatness And Durability; The Soft Magnetic Sticker Has A Strong Magnetic Force.
🧡【Easy To Use】The Traditional Dlp Light Curing Printer Platform Must Be Removed With Tools Such As A Scraper, While This Resin Flexible Board Can Be Removed By Bending. Easier To Remove Printed Models From Resin Build Surfaces And Never Again Scratch Or Damage Your Prints Or Build Plates!.
Features
- Applicable 3d printer model The size of resin spring steel plate is 150x95mm. Suitable for any resin 3D printer with a printing platform size of 150x95mm, such as: Elegoo-Mars 3 SLA LCD Resin 3D Printer
- Easy to use The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible board can be removed by bending. Easier to remove printed models from resin build surfaces and never again scratch or damage your prints or build plates!
- Strong adhesion The surface of the resin steel plate is treated with special wire drawing, which has a stronger adsorption force, so that the model can be better adsorbed
- High Durability The resin steel plate is made of spring steel imported from the United States, with good flatness and durability; the soft magnetic sticker has a strong magnetic force
- 24 Months Longer Warranty All components are rigorously tested before shipment. We will provide a long-term warranty service of up to 24 months (normal warranty period is 12 months). We will respond promptly within 12 hours within one working day. Any questions, please feel free to write to us.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #5
2Sets Original Upgraded Platform Resin Magnetic Flexible Steel Plate + Base Kits Compatible with Creality LD-002H SLA 3D Printer Accessories (138x85mm)
Asin: B09C4PQ51L | Model: LCD Resin Magnetic Flexible Steel Plate | PartNumber: LCD Resin Magnetic Flexible Steel Plate | Ean: 0791548328137 | UPC: 791548328137
Reserved Double Handles, It Is Easy And Convenient To Pick The Steel Sheet Up..
Package: 2Sets (2Pcs Steel Sheets And 2Pcs Magnetic Sheets), One Paper Instructions Will Come With The Parcel..
It Is Compatible With Creality Ld-002H Sla 3D Printer And Other Suitable Size Printers..
Wear-Resistant, High Quality Steel Plate Soft Magnetism, Spring Steel Sheet Consist Of Alloy, Anti-Wearing/Scraping, More Dorable..
Features
- Made from Spring steel material and size 138x85x0.4mm, Surface Brushed treatment, Print model is closer to the steel plate, easy to remove printed model and Not demould in printing.
- Wear-resistant, High quality steel plate soft magnetism, Spring steel sheet consist of alloy, anti-wearing/scraping, more dorable.
- Reserved double handles, it is easy and convenient to pick the steel sheet up.
- it is Compatible with Creality LD-002H SLA 3D Printer and other suitable size printers.
- Package: 2sets (2pcs steel sheets and 2pcs magnetic sheets), one paper instructions will come with the parcel.
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HoCenWay
Weight: 0.44 pounds
See On Amazon #6
3D Resin Magnetic Flexible Steel Plate Flex Bed 1Pc, Spring Steel Sheet for Anycubic Photon M3 SLA 3D Printer 172x110mm
Asin: B0BJDZKBTS | Model: CAA005000121-1 | PartNumber: CAA005000121-1
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The 3M Adhesive Has Strong Viscosity And Good Adhesive At Low Temperature To Make It Hard To Fall Off After Bonding With Platform.
If You Have Any Questions About Our Products, Please Contact Us First And We Will Help You To Solve Them..
Flex Plate With High Elasticity Feature, Easy To Take Off The Print Item Without Use The Tool. Just Need Bend The Flex Plate A Little, The Print Item Will Fall Off.Durable For A Long Time Use.
Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference.
Features
- 3D Resin Magnetic Flexible Steel Plate Flex Bed 1Pc, Spring Steel Sheet for Anycubic Photon M3 SLA 3D Printer 172x110mm
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform
- Flex plate with high elasticity feature, easy to take off the print item without use the tool. Just need bend the flex plate a little, the print item will fall off.Durable for a long time use
- If you have any questions about our products, please contact us first and we will help you to solve them.
- See more on Amazon...
Brand: chitu systems | Manufacturer: chitu systems
See On Amazon #7
KOYOFEI 2PCS Resin 3D Printer Flex Build Plate, Spring Steel Flexible Plate and Magnetic Base Platform for Photon M3 172x110mm
Asin: B0BKRH6XQS
Size Information: The Size Of The Magnetic Steel Plate Is 172* 110 Mm, And The Thickness Of This Platform Is 3-4Mm, Compatible With Anycubic Photon M3. Due To The Thickness Of The Product Itself, The Printable Height Of The 3D Printer Will Shrink By 3-4Mm. At The Same Time, After Installing The Magnetic Printing Platform, You Will Need To Re-Leveling The 3D Printer For Excellent Printing Results..
Installation Tips: First Clean Your Build Plate Very Well, Let It Dry, Connect Your Magnet To The Plate, Let It Sit For A While So It Is Fully Seated, Then Install The Spring Steel Plate On The Magnetic Base, Last Reset The Printer's Leveling Settings To Start Printing ..
Unique Handle Design: The Magnetic Printing Platform Is Equipped With A Handle That Makes It Easy To Install And Remove The Magnetic Printing Platform..
Robust And Durable Stainless Steel Material: The Magnetic Printing Platform Is Made Of High Quality Stainless Steel Material And Has Good Elasticity. After Bending And Removing The Model, It Can Be Quickly Returned To Its Original State And Reused..
Features
- Flexible and Magnetic Platform: The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from falling off during printing.
- Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its original state and reused.
- Size information: The size of the magnetic steel plate is 172* 110 mm, and the thickness of this platform is 3-4mm, compatible with Anycubic Photon M3. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 3-4mm. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing .
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
See On Amazon #8
ALadrs Resin 3D Printer Flex Building Plate,135x80mm Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono, Mono 4K LCD/DLP 2pcs
Asin: B0CKVSS6PK | Model: ALA-3D-043 | PartNumber: ALA-3D-043 | Ean: 0746713696030 | UPC: 746713696030
Easy To Operate: Traditional Dlp Light-Curing Printer Platforms Must Use Tools To Disassemble, While This Resin Flexible Board Can Be Disassembled By Bending. Easier Removal Of Printed Models From The Resin Build Surface. Makes It Easier To Remove Prints And Avoid Damage In The Process, Especially For Small Prints..
Installation Method: Thoroughly Clean And Dry The Printing Platform Plate, Attach The Magnet To The Printing Platform Plate And Let It Sit For A While To Fully Seat It, Install The Spring Steel Plate On The Magnetic Base Again, And Finally Reset And Level The Printer. Set To Start Printing. It Is Recommended To Print (A4) 3.8Mm Thick Spacers To Facilitate The Normal Zeroing Of The Z Axis..
Clever Design: The Magnetic Printing Platform Is Equipped With A Handle That Makes It Easy To Install And Remove The Magnetic Printing Platform..
High Durability:Flexible Steel Plate With High Chromium Content, Easy To Bend And Clean. Much Easier To Remove Prints And Avoid Damages During The Process, Especially For Small Prints. Good Corrossion Resistance And Prevent Rust. Brushed Surface Provides Better Adhesion, Ensure A Perfect Print. At The Same Time, After Installing The Magnetic Printing Platform, You Will Need To Re-Leveling The 3D Printer For Excellent Printing Results..
Features
- Applicable model: 135x80mm is made for Photon Mono/Photon Mono 4K.This resin magnetic flexible steel plate flex bed is also can used for the plate 's size which is longth between 135-145 mm,the width between 80-90mm.
- High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
- Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints.
- Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
- Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.
- See more on Amazon...
Brand: Aladrs | Manufacturer: Aladrs
See On Amazon #9
Upgraded Resin Build Plate 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm
Asin: B094FQBDP6 | Model: US-GB | PartNumber: US-GB
Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference.Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
The Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The 3M Adhesive Has Strong Viscosity And Good Adhesive At Low Temperature To Make It Hard To Fall Off After Bonding With Platform..
Flexible Steel Plate With High Chromium Content, Easy To Bend And Clean. Much Easier To Remove Prints And Avoid Damages During The Process, Especially For Small Prints. Good Corrossion Resistance And Prevent Rust. Brushed Surface Provides Better Adhesion, Ensure A Perfect Print..
Features
- Working for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/ Qidi Shadow 5.5S 3D Printer
- Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference.Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform.
- The easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Skouphy
See On Amazon #10
AITRIP 2PCS Resin 3D Printer Plate, Building Plate and Magnetic Sheet, Flexible Steel Plate, Flexible Bed for Elegoo Saturn 3D Printer, 196 x 126 mm
Asin: B09TZVRVRB | Ean: 0701715515154 | UPC: 701715515154
Made Of High-Quality Spring Steel, With Good Flatness. It Will Not Cause Deformation After Bending To Take The Print..
High Quality: Good Corrosion Resistance And Rust Resistance. Brushed Surface Provides Better Adhesion, Ensures A Perfect Print..
The Surface Of The Magnetic Flexible Bed Has Been Wire-Drawing, And The Adhesion Is Stronger. Let The Model Better Adsorption..
The Size Of The Magnetic Steel Plate Is 196 X 126 Mm And The Thickness Of This Plate Is 3-4 Mm, Compatible With Elegoo Saturn. Due To The Thickness Of The Product Itself, The Printable Height Of The 3D Printer Is Reduced By 3-4 Mm. At The Same Time, After Installing The Magnetic Printing Plate, You Need To Re-Level The 3D Printer To Achieve Excellent Printing Results..
Features
- Strong and durable stainless steel material: The magnetic printing plate is made of high-quality stainless steel material and has good elasticity. It can be quickly returned to its original state after bending and removing the model and reused again.
- The size of the magnetic steel plate is 196 x 126 mm and the thickness of this plate is 3-4 mm, compatible with Elegoo Saturn. Due to the thickness of the product itself, the printable height of the 3D printer is reduced by 3-4 mm. At the same time, after installing the magnetic printing plate, you need to re-level the 3D printer to achieve excellent printing results.
- Made of high-quality spring steel, with good flatness. It will not cause deformation after bending to take the print.
- The surface of the magnetic flexible bed has been wire-drawing, and the adhesion is stronger. Let the model better adsorption.
- High quality: good corrosion resistance and rust resistance. Brushed surface provides better adhesion, ensures a perfect print.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #11
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for Mars/Mars C/Mars Pro/Wanhao D7/ Phrozen Sonic Mini 4K/ Monoprice Deluxe SLA 3D Printer 135X75mm
Asin: B08NDXT565 | Model: SV-GGHGB2 | PartNumber: SV-GGHGB2
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼️Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
Brand: Sovol 3D | Manufacturer: Sovol
See On Amazon #12
1PC Flexible Spring Steel Resin Build Plate 172x110mm (6.8x4.3in) Flex Bed with Magnetic Sheet for Anycubic Photon M3 SLA 3D Printer.
Asin: B0C2BZ22F7
3.【Compatible Models】:The Resin Flexible Build Plate, 172X110mm (6.8X4.3Inch),Compatible With Anycubic Photon M3 Sla 3D Printer.For The Suitable Models Not Mentioned, Please Measure In Advance Before Purchasing, Or You Can Contact Us At Any Time..
5.【Commitment】:We Have Our Own Factory, Directly Serve Consumers, And Strictly Test All Products Before Leaving The Factory. Considering The Long-Distance Transportation, If There Are Any Quality Problems, Please Feel Free To Contact Us, We Will Reply Promptly Within 12 Hours Within One Working Day, And Solve It For You..
4.【Packing List】: 1 Piece Resin Flexible Build Plate + 1 Piece Magnetic Sticker Base.There Is A Transparent Protective Film On The Surface, Which Needs To Be Torn Off Before Use, And Washed And Dried With Cleaning Agents Such As Alcohol..
2.【Installation Notes】:1.Thoroughly Clean And Dry The Build Plate Before Installation.2.Connect The Magnet To The Plate And Allow It To Sit For A Sufficient Period (Preferably More Than 24 Hours) To Ensure Full Seating.3.Install The Spring Steel Plate Securely Onto The Magnetic Base.4.Reset The Printer's Leveling Settings To Begin Printing..
Features
- 1. Easy to Use :No scraper, reusable after installation, the resin model can be directly removed by bending the flexible steel plate, using imported spring steel, better flatness and durability; The surface of the resin steel build plate is specially brushed to increase the surface viscosity; Thicken the 3M soft sticker to make the magnetic force stronger and should not be dropped.
- 2. Installation Notes :1.Thoroughly clean and dry the build plate before installation.2.Connect the magnet to the plate and allow it to sit for a sufficient period (preferably more than 24 hours) to ensure full seating.3.Install the spring steel plate securely onto the magnetic base.4.Reset the printer's leveling settings to begin printing.
- 3. Compatible Models :The resin flexible build plate, 172x110mm (6.8x4.3inch),compatible with Anycubic Photon M3 SLA 3D Printer.For the suitable models not mentioned, please measure in advance before purchasing, or you can contact us at any time.
- 4. Packing List : 1 piece resin flexible build plate + 1 piece magnetic sticker base.There is a transparent protective film on the surface, which needs to be torn off before use, and washed and dried with cleaning agents such as alcohol.
- 5. Commitment :We have our own factory, directly serve consumers, and strictly test all products before leaving the factory. Considering the long-distance transportation, if there are any quality problems, please feel free to contact us, we will reply promptly within 12 hours within one working day, and solve it for you.
- See more on Amazon...
Brand: Shion.Kwoo | Manufacturer: Shion.Kwoo
See On Amazon #13
Bilway Resin Build Plate+Magnetic Sheet, 135X80mm Resin Magnetic Flexible Steel Plate Flex Bed for ANYCUBIC Photon, Photon S, Photon Mono (Pack of 2)
Asin: B093RVGPTD | Model: BL-PEI-135-80 | PartNumber: BL-PEI-135-80 | Ean: 0738631205401 | UPC: 738631205401
The Resin Steel Plate Surface Is Treated With Special Wire Drawing, And The Adsorption Force Is Stronger, So That The Model Can Be Better Adsorbed.
Strict Testing For All Components Before Delivery.We Will Provide A Long-Term Warranty Service Of Up To 24 Months(The Normal Warranty Period Is 12 Months). We Will Respond Promptly Within 12 Hours In One Business Day. Any Problem Please Feel Free To Write To Us..
The Resin Steel Plate Adopts Spring Steel Imported From Usa, Which Has Good Flatness And Durability; The Soft Magnetic Stickers Have Strong Magnetic Force.
The Traditional Dlp Light Curing Printer Platform Must Be Removed With Tools Such As A Scraper, While This Resin Flexible Plate Can Be Removed By Bending.It's Easier To Remove The Print Model From The Resin Build Surface..
Features
- The size of resin spring steel plate is 5.3X3.15inch(135X80mm). Suitable for any DLP light-curing 3D printer with a printing platform size of 135X80mm, such as: Anycubic photon, photon S, Photon Mono, Photon Mono SE, Qidi Shadow 5.5S;
- The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface.
- The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed
- The resin steel plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force
- Strict testing for all components before delivery.We will provide a long-term warranty service of up to 24 months(The normal warranty period is 12 months). We will respond promptly within 12 hours in one business day. Any problem please feel free to write to us.
- See more on Amazon...
Brand: Bilway | Manufacturer: Bilway
See On Amazon #14
BCZAMD Resin Flexible Build Plate 3D Printer Spring Steel Plate Upgraded Platform with Magnetic Base 135x80mm/5.3x3.14 inch Compatible with Anycub Photo Mono/Ultra
Asin: B08R5ZXQX3 | Model: AiUS-Resin Printer Platform 135x80mm | PartNumber: AiUS-Resin Printer Platform 135x80mm | Ean: 0738678972458 | UPC: 738678972458
Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon #15
Cregrant3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm(5.3X3.15inch
Asin: B094J2GXVP | Model: 2 | PartNumber: 2
【Strong Adhesion】The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The 3M Adhesive Has Strong Viscosity And Good Adhesive At Low Temperature To Make It Hard To Fall Off After Bonding With Platform. Besides, Resin Steel Plate Surface Is Treated With Special Wire Drawing, And The Adsorption Force Is Stronger, So That The Model Can Be Better Adsorbed..
【Istallation Notes】Please Adjust The Z Limit Switch After Installation. Some Printers May No Problem With It, So No Need To Adjust Z Limit Switch..
【High Durability】Flexible Steel Plate With High Chromium Content, Easy To Bend And Clean. Much Easier To Remove Prints And Avoid Damages During The Process, Especially For Small Prints. Good Corrossion Resistance And Prevent Rust. Brushed Surface Provides Better Adhesion, Ensure A Perfect Print..
【Easy To Use】Traditional Dlp Light Curing Printer Platform Must Be Removed With Tools While This Resin Flexible Plate Can Be Removed By Bending.It's Easier To Remove The Print Model From The Resin Build Surface..
Features
- Applicable 3d printer model The size of Resin Magnetic Flexible Steel Plate Flex Bed is 135X80mm. Suitable for any resin 3D printer with a printing platform size of 135X80mm, such as: ANYCUBIC Photon, Photon S, Photon Mono, Photon Mono SE, Qidi Shadow 5.5S.
- Easy to use Traditional DLP light curing printer platform must be removed with tools while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface.
- Strong Adhesion The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform. Besides, resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed.
- High durability Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Istallation Notes Please adjust the z limit switch after installation. Some printers may no problem with it, so no need to adjust Z limit switch.
- See more on Amazon...
Brand: Cregrant3D | Manufacturer: Cregrant3D
See On Amazon #16
HIKUDIY 2 PCS Resin 3D Printer Flex Build Plate, Spring Steel Flexible Plate Flex Bed and Magnetic Base Platform for ELEGOO Mars 3 Pro/Mars 3 Pro/Mars 3 Ultra 4K 3D Printer, 150x95mm
Asin: B0CNH5CBG3
Built To Endure, Print After Print: Crafted From Premium-Grade Steel, With Good Elasticity, This Build Plate Is Engineered To Withstand The Rigors Of Continuous Printing. Expect Unwavering Durability That Stands The Test Of Time, Providing A Reliable Foundation Without Warping Or Wear. After Bending And Removing The Model, It Can Be Quickly Returned To Its Original State And Reused.
Installation Tips: !!! Please Clean Up Your Building Plate With Alcohol To Make Sure There Is No Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. Stick And Compact The Magnetic Base On The Build Plate, Let It Sit For A While So It Is Fully Seated, Then Install The Spring Steel Plate On The Magnetic Base, Last Reset The Printer's Leveling Settings To Start Printing.
Seamless Setup, Effortless Maintenance: Say Goodbye To Printing Hassles. This Magnetic Printing Platform Is Equipped With A Handle That Makes It Easy To Offer Hassle-Free Installation And Removal, Streamlining Your Printing Process And Simplifying Post-Printing Cleanup For A Seamless Experience.
Precision-Engineered For Impeccable Prints: Elevate Your Resin 3D Printing Game With This Meticulously Crafted Steel Build Plate. The Surface Of The Steel Plate Is Machined By Cnc Drawing, Which Has Good Adsorption Force To Prevent The Model From Falling Off During Printing.
Features
- Application: The size of the magnetic steel plate is 150*95mm, and the thickness of this platform is 3-4mm, compatible with ELEGOO Mars 3 Pro / Mars 3 Pro / Mars 3 Ultra 4K 3D Printer. Due to the thickness of the product itself, the printable height of the 3D printer will shrink by 3-4mm. So after installing the magnetic printing platform, you will need to re-level the 3D printer for excellent printing results
- Precision-Engineered for Impeccable Prints: Elevate your resin 3D printing game with this meticulously crafted steel build plate. The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from falling off during printing
- Built to Endure, Print after Print: Crafted from premium-grade steel, with good elasticity, this build plate is engineered to withstand the rigors of continuous printing. Expect unwavering durability that stands the test of time, providing a reliable foundation without warping or wear. After bending and removing the model, it can be quickly returned to its original state and reused
- Seamless Setup, Effortless Maintenance: Say goodbye to printing hassles. This magnetic printing platform is equipped with a handle that makes it easy to offer hassle-free installation and removal, streamlining your printing process and simplifying post-printing cleanup for a seamless experience
- Installation Tips: !!! Please clean up your building plate with alcohol to make sure there is no resin or dust left on the surface. The build plate must be clean and dry. Stick and compact the magnetic base on the build plate, let it sit for a while so it is fully seated, then install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing
- See more on Amazon...
Brand: HIKUDIY | Manufacturer: HIKUDIY
Dimensions: 0.59 x 7.09 x 5.91 Inches
See On Amazon #17
2 Pack Upgraded 3D Printer Platform, Flexible Steel Plate and Magnetic Base Sticker, Removable Resin Magnetic Flex Bed Flexible Steel Plate for 3D Printer 135x80MM
Asin: B08YNHQWS4 | Model: -2THB4006 | PartNumber: -2THB4006 | Ean: 0601982897642 | UPC: 601982897642
3. Powerful Magnetics: The 3M Adhesive Has Strong Viscosity And Good Adhesive At Low Temperature To Make It Hard To Fall Off After Bonding With Platform. The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With The Steel Plate..
5. Applicable 3D Printer Model: The Size Of The Flexible Steel Plate Is 135X80mm. Suitable For Any Resin 3D Printer With A Printing Platform Size Of 135X80mm, Such As Anycubic Photon/Photon S/Photon Mono/Photon Mono Se/Qidi Shadow 5.5S Sla 3D Printer..
4. Easy To Remove The Steel Plate: Two Tabs (Handles) Design, Makes It Easier To Remove The Steel Plate From The Magnetic Base..
2. Strong Adhesion: The Special Brushed Surface Treatment Makes The Printed Parts Better Adhere To The Panel, Ensure A Perfect Print..
Features
- 1. Easy to use: This flexible steel plate makes the models very easy to take off; No tools needed when removing models, just bend gently. Resilient steel plate, no deformation after repeated bending, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints.
- 2. Strong Adhesion: The special brushed surface treatment makes the printed parts better adhere to the panel, ensure a perfect print.
- 3. Powerful Magnetics: The 3M adhesive has strong viscosity and good adhesive at low temperature to make it hard to fall off after bonding with platform. The magnetic base offers powerful magnetics, ensure perfect fit with the steel plate.
- 4. Easy to remove the steel plate: Two tabs (Handles) design, makes it easier to remove the steel plate from the magnetic base.
- 5. Applicable 3D printer Model: The size of the flexible steel plate is 135X80mm. Suitable for any resin 3D printer with a printing platform size of 135X80mm, Such as ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer.
- See more on Amazon...
Brand: Yuepin | Manufacturer: Yuepin
See On Amazon #18
Sovol 2 Pack Resin 3D Printer Flex Build Plate + 1 Pack Metal Resin Vat for ELEGOO Saturn 2/Saturn 3/Saturn 3 Ultra
Asin: B0CSPR395P
This Resin Tank Kit Comes With 1 Silicone Lid, 95% Uv Protection, Keeps The Resin Vat And Fep Film Away From Dust, Scratch, Uv Light Source Or Direct Sunlight. Perfect For Resin Storage..
Perfect Spare Resin Vat When You Need To Change Resin Color Faster And Have A Better Printing Experience..
Upgraded Pour Spout Design Avoids The Disadvantages Of The Original Resin Vat. The Resin Would Not Overflow When You Pour It Out Of The Resin Vat..
Made Of Aluminum Alloy For Long Term Usage. Clear And Wear-Resistance Measurements, Easier To Use And Convenient For Printing. Maximum Capacity Is 750Ml..
Features
- Sovol 3D resin vat fits for ELEGOO Saturn 2/Saturn 3/Saturn 3 Ultra/Anycubic Photon Mono 5S/Photon Mono 5. The FEP film and steel rings have been preinstalled. The FEP film coming with the vat resistants to -240 ~205 , 95% UV transmittance. The release film can be replaced with common release films in the market. NOTE: Please check if the protective films have been peeled off before installation.
- Made of aluminum alloy for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing. Maximum capacity is 750ml.
- This resin tank kit comes with 1 silicone lid, 95% UV protection, keeps the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
- Upgraded pour spout design avoids the disadvantages of the original resin vat. The resin would not overflow when you pour it out of the resin vat.
- Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
- See more on Amazon...
Brand: Sovol
See On Amazon #19
Imdinnogo BCZADM Resin Printing Flex Magnetic Bed Build Plate 150x95mm/5.9X3.4in Resin Edition Stainless Steel Metal Plate with Strong Magnetic Sticker for Elego Mar 3 SLA 3D Printer Part Accessories
Asin: B0B97GX6N3
Tips: Used Clamps To Hold The Flex-Plate And Magnet Against The Build-Plate For 72 Hours. Or Set It Down And Stacked A Heavy Of Stuff On Top Of The Build Plate For 48 Hours To Make Sure The Adhesive Was Good And Stuck..
Several 3D Printing Youtubers Have Relevant Videos You Should Watch Before You Try. After Every Printing, If Did Not Stick, Sanded Your Plate, Also Use Some Steel Wool (Or Suggest 150 - 400 Grit Sandpaper.) To Scuff Up The Metal Sheet To Ensure Adhesion For Your Prints..
Step 2: Before Installing,We Recommand To Print/Install A Z-Axis Spacer Also Get Longer Screws To Keep The New Assembly In Place, Reference (Thingiverse: 4533310), It Can Avoid The Build Plate Will Impact The Glass Every Time , Reset Your Z Limit To Account For The Additional 2.6 Mm, Re-Level Your Machine And You're Golden!.
How To Install Well: Step 1- Make Sure To Thoroughly Clean Your Build Plate Before Sticking The Adhesive Pad To It! Then Stick The Magnetic Thing To The Build Plate..
Features
- Plex plate is a must-have for resin printing, its an amazing product that will really improve your printing experience: Easy to use and the prints pop off without any difficulty.
- How to install well: Step 1- Make sure to thoroughly clean your build plate before sticking the adhesive pad to it! Then stick the magnetic thing to the build plate.
- Tips: Used clamps to hold the flex-plate and magnet against the build-plate for 72 hours. or set it down and stacked a heavy of stuff on top of the build plate for 48 hours to make sure the adhesive was good and stuck.
- Step 2: Before installing,We recommand to Print/install a z-axis spacer also get longer screws to keep the new assembly in place, reference (thingiverse: 4533310), it can avoid the build plate will impact the glass every time , reset your Z limit to account for the additional 2.6 mm, re-level your machine and you're golden!
- Several 3D printing youtubers have relevant videos you should watch before you try. After every printing, if did not stick, sanded your plate, Also use some steel wool (or suggest 150 - 400 grit sandpaper.) to scuff up the metal sheet to ensure adhesion for your prints.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Imdinnogo
See On Amazon
Looking For Something Else?
Search