Peachtree Woodworking Supply 6 Piece Dovetail and Straight Router Bit Set with Brass Setup Bar(not Included)
Asin: B08MWRTV86 | Model: 3437 | PartNumber: 3437 | Ean: 0814310011119 | UPC: 814310011119
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Reason We Need To Use Different Size Bits For Different Thicknesses Of Stock Is To Make Sure That Dovetail Cuts Not Only Look Good, But The Bearing Must Sit Just Right On The Peachtree Dovetail Jig (Not Included And Sold Separately) While Cutting. Using The Incorrect Size Bit Could Result In Damaging The Bit Or Jig..
Also Included With This Set Is A Brass Setup Bar That Is Machined To Exactly 9/16” Square. The Brass Bar Is Used To For Setting Up The Opposing Piece Of Stock When Cutting Box Joints. It Is The Exactly Width Of The Box Joint Bit That Is Included In This Set. This Ensures That Your Box Joints Will Always Fit Perfectly Each And Every Time! Each Bit In This Set Has A ¼” Shank. The Bits And The Brass Bar Are Stored In The Included Wooden Box With Locking Clasp..
Each Router Bit Included In This Set Has The Set Part Number Printed On The Shank. This Is Done So You Can Always Tell Which Dovetail Bit Goes With Which Straight Bit. Each Dovetail, Straight Bit Pair Of Router Bits Have The Same Identifying Number On The Shank. The Box Joint Bit Has Its Own Identifying Number On It That Does Not Correspond With Any Of The Other Bits In The Set..
This Set Comes With A Mini Router Bit Set, A Small Router Bit Set And A Box Joint Bit With A Brass Setup Bar. The Mini And Small Router Bit Set Both Included A Straight Router Bit With A Bearing And A Dovetail Bit With A Bearing. The Mini Router Bit Set Cuts Stock 1/8” Thick To 3/8” Thick. The Small Router Bit Set Cuts Stock ¼” Thick To ½” Thick. The Box Joint Router Bit Will Cut Stock From ½” In Thickness To ¾” In Thickness..
Features
- The Peachtree Dovetail Jig (NOT included and sold separately)comes with a standard router bit set for working with stock from 5/8 in thickness to in thickness. There are times however, that we would like to make dovetail cuts in different thicknesses of stock. To do this, you will need to use different size router bits to achieve optimum results. Using the wrong size bits can result in damaging the router bit and dovetail jig (dovetail jig NOT included)
- This set comes with a Mini Router Bit Set, a Small Router Bit Set and a Box Joint Bit with a Brass Setup Bar. The Mini and Small Router Bit Set both included a straight router bit with a bearing and a dovetail bit with a bearing. The Mini Router Bit Set cuts stock 1/8 thick to 3/8 thick. The Small Router Bit Set cuts stock thick to thick. The Box Joint Router Bit will cut stock from in thickness to in thickness.
- The reason we need to use different size bits for different thicknesses of stock is to make sure that dovetail cuts not only look good, but the bearing must sit just right on the Peachtree Dovetail Jig (not included and sold separately) while cutting. Using the incorrect size bit could result in damaging the bit or jig.
- Each router bit included in this set has the set part number printed on the shank. This is done so you can always tell which dovetail bit goes with which straight bit. Each dovetail, straight bit pair of router bits have the same identifying number on the shank. The box joint bit has its own identifying number on it that does not correspond with any of the other bits in the set.
- Also included with this set is a brass setup bar that is machined to exactly 9/16 square. The brass bar is used to for setting up the opposing piece of stock when cutting box joints. It is the exactly width of the box joint bit that is included in this set. This ensures that your box joints will always fit perfectly each and every time! Each bit in this set has a shank. The bits and the brass bar are stored in the included wooden box with locking clasp.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon Similar To Peachtree Woodworking Supply 6 Piece
#1
Peachtree Woodworking Supply 10 Pack of White Non Scratch Non-Woven Pads for Cleaning/Polishing and Multi Purpose Use in Your Home Workshop or DIY Garage Shop Made in The USA
Asin: B00EY9ZB52 | Model: 30 | PartNumber: 30 | Ean: 0810948013099 | UPC: 810948013099
This Is An Extra Soft Pad That Can Be Used On Many Different Delicate Surfaces Like Porcelain Sinks, Tubs And Toilet Bowls. Also Works Well For Cleaning Rubber, Vinyl, Ceramic Tile, Dishes, Stainless Steel, Metal Furniture And Fixtures Around The House..
To Prolong The Life Of The Pad It Should Be Rinsed Thoroughly After Every Use Regardless Of Material Or Surface It Was Used With Or On..
The Light Duty Hand Pad Is Constructed Of Polyester Fibers Along With Synthetic Adhesives That Will Not Be Notably Affected By Water, Cleaners Or Natural Wood Finishes. The Polyester Fiber Used In Our Pads Comes From 100% Post Consumer And Industrial Recycled Waste Product..
The White Non-Woven Hand Pads Measure Approximately 6 Inches Wide By 9 Inches In Length. The Pad Can Be Cut Using A Pair Of Household Scissors To Create Just The Right Size And Shape For Your Project Or Application. Each Pad Is Made Of Polyester Fibers In A Dense Textured, Non-Woven Pattern, Bonded With A Sturdy Adhesive. Each Pad Is Approximately .375 Inches Thick..
Features
- We ve all used our scouring pads for multiple projects and chores around the house. From doing the dishes to cleaning up fibers on the next great woodworking project, these type of pads do the trick. This white light duty non-woven pad is the perfect addition to any kitchen, workshop or DIY garage shop! You can use it to clean surfaces, polish woodworking projects, apply finishes and a whole lot more!
- The White Non-Woven Hand Pads measure approximately 6 inches wide by 9 inches in length. The pad can be cut using a pair of household scissors to create just the right size and shape for your project or application. Each pad is made of polyester fibers in a dense textured, non-woven pattern, bonded with a sturdy adhesive. Each pad is approximately .375 inches thick.
- This is an extra soft pad that can be used on many different delicate surfaces like porcelain sinks, tubs and toilet bowls. Also works well for cleaning rubber, vinyl, ceramic tile, dishes, stainless steel, metal furniture and fixtures around the house.
- The Light Duty Hand Pad is constructed of polyester fibers along with synthetic adhesives that will not be notably affected by water, cleaners or natural wood finishes. The polyester fiber used in our pads comes from 100% post consumer and industrial recycled waste product.
- To prolong the life of the pad it should be rinsed thoroughly after every use regardless of material or surface it was used with or on.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 0.38 x 9.00 x 6.00 inches
See On Amazon #2
Keystone 100 Fine Sanding Twig Assortment Pack with 4 Different Color Coded Abrasive Grits
Asin: B08YFMG6Z9 | Model: 11590 | PartNumber: 11590 | Ean: 0817918022969 | UPC: 817918022969
You’Ll Find Multiple Uses For These Sanding Twigs All Around Your Home, Workshop Or Hobby Shop. From De-Burring Small Pipes, To Your Working On Your Latest Arts And Crafts Project, These Twigs Are The Perfect Choice To Get The Job Done. The Size And Shape Makes Them Perfect For Just About Any Smaller Object That Needs To Be Detail Sanded..
This Convenient Pack Of Sanding Twigs Comes With 25 Each Of 4 Different Sanding Grits. This Gives You A Total Of 100 Sanding Twigs For Working Most Any Type Of Project. In This Pack You Will Receive 25 Each Of The Following Color Coded Grits: 180 Grit, 240 Grit, 320 Grit 400 Grit. These Grits Are Perfect For Most General Sanding Applications Ranging From Woodworking To Model Building..
Each Detail Sanding Stick Is Approximately 6 Inches Long And 1/8 Inch Thick With The Abrasive On Both Sides Of The Twig. The Twigs Are The Same Dimension The Entire Length Of The Twig. This Makes Them Ideal For Small Projects. The Abrasive Sides Are Layered And Bonded On To A Foam Core Which Is Firm Enough For General Sanding Purposes And Forgiving Enough For Delicate Areas On Your Projects..
The Narrow Size Of The Keystone Sanding Twigs Make Them Ideal For Many Types Of Projects. Woodworkers Love These Unique Twigs For Sanding Applications Like Dowel Holes And Dovetail Corners For Great Fitting Joinery. Woodworkers Also Use These Sticks For Many Different Small Projects Like Wooden Toys And Wood Turnings. Many Scale Model Builders Use This Style Of Sanding Twig For Easily Working The Trim On The Plastic Parts When The Models Are Taken Apart From The Runner (Parts Holder).
Features
- Detail sanding can be very tedious work, especially when your sanding things like wooden toys, plastic scale models, wood turnings or most any small project. We often settle for a piece of sandpaper, fold it multiple times and struggle to get into tight spaces. With the perfectly sized Keystone Sanding Twigs, this becomes a thing of the past. With the 1/8 inch thick, flexible foam core, laminated with a double sided abrasive, you ll be able to sand those hard to reach areas and more!
- The narrow size of the Keystone Sanding Twigs make them ideal for many types of projects. Woodworkers love these unique twigs for sanding applications like dowel holes and dovetail corners for great fitting joinery. Woodworkers also use these sticks for many different small projects like wooden toys and wood turnings. Many scale model builders use this style of sanding twig for easily working the trim on the plastic parts when the models are taken apart from the runner (parts holder)
- You ll find multiple uses for these sanding twigs all around your home, workshop or hobby shop. From de-burring small pipes, to your working on your latest arts and crafts project, these twigs are the perfect choice to get the job done. The size and shape makes them perfect for just about any smaller object that needs to be detail sanded.
- Each detail sanding stick is approximately 6 inches long and 1/8 inch thick with the abrasive on both sides of the twig. The twigs are the same dimension the entire length of the twig. This makes them ideal for small projects. The abrasive sides are layered and bonded on to a foam core which is firm enough for general sanding purposes and forgiving enough for delicate areas on your projects.
- This convenient pack of sanding twigs comes with 25 each of 4 different sanding grits. This gives you a total of 100 sanding twigs for working most any type of project. In this pack you will receive 25 each of the following color coded grits: 180 grit, 240 grit, 320 grit 400 grit. These grits are perfect for most general sanding applications ranging from woodworking to model building.
- See more on Amazon...
Brand: Keystone | Manufacturer: Keystone Abrasive Sanding Products
See On Amazon #3
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Weight: 9.15 pounds
See On Amazon #4
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 2.50 Pounds
See On Amazon #5
Peachtree Woodworking Supply Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges Includes Setup Blocks and Quad Jig for 8 inch Grinders
Asin: B01HDEJGLE | Model: 7575 | PartNumber: 7575 | Ean: 0814310018552 | UPC: 814310018552
The Pro Grind Tool Rest Bar Attachment Offers You The Best Possible Way To Achieve A Precise Edge To Your Bevels Without Taking Of Too Much Material Off Of Your Tool. After All, We Need Our Tools To Last A Long Time, So Why Would You Want To Take Off To Much At A Time? The Tool Rest Bar Is Ideal For Sharpening Curved, Even Bevel Edges That Are Typically Used On Spindle And Roughing Gouges..
The Pro Grind Sharpening System Also Comes With A Number Of Setup Jigs And Accessories To Help In The Setup Process To Sharpen Your Tools To The Proper And Repeatable Angles. From The Built-In Projection Gauge On The Multi-Grind Arm To The Magnetic Micro Bevel Setup Block You’Ll Be Able To Achieve Consistent Repeatable Angles And Produce Excellent Results Each And Every Time You Use The Pro Grind Sharpening Jig System..
The Large, 3” X 5” Slotted Platform Is The Ideal Way To Sharpen Flat Edged Tools Like Wood Turning Skews, Chisels And Hand Plane Irons. The Platform Has A Slot Milled Horizontally Through It So It Can Accept The Included Tool Holder. The Tool Holder Is Designed To Keep Your Tools At The Correct Angle While Being Able To Slide Side To Side During The Sharpening Process..
The Included And Versatile Multi-Grind Jig Will Correctly Shape The Edge On Bowl Gouges, Side Grinds (Aka Ellsworth Grind, Liam O’Neil Grind/Irish Grind) Or Fingernail Grinds For Spindle Work And Detailing. Not Only Will It Correctly Shape Your Tools, You Will Also Be Able To Repeat The Process To Produce Consistent Results Every Time. The Multi-Grind Jig Is Designed To Be Used With The Included Multi-Grind Arm On The Pro Grind Sharpening System And Will Accept Tools Up To 1.125” In Diameter..
Features
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply
Dimensions: 30.00 x 9.00 x 4.00 Inches
See On Amazon #6
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #7
Incra PROTRAC06 6-Inch Precision Marking Protractor
Asin: B00002255K | Model: PROTRAC06 | PartNumber: PROTRAC06
Ean: 5526679998547, 5448095800498, 0772223372362, 0736126974566, 0732454333464, 0751922706012, 0885305306008, 0767654694640, 0735090658953
UPC: 735090658953, 751922706012, 772223372362, 736126974566, 732454333464, 767654694640, 885305306008
6-Inch Centering Scale With Micro-Fine Marking Holes At Every 1/32 Inches.
Micro-Fine Guide Holes At Every 45-, 30-, 22.5-, 5-, 1-, And 0.5-Degree Intervals.
Four Angle Scales, Including One For Marking Narrow Stock.
T-Bar And See-Through Crosshairs Provide Perfect Alignment.
Features
- Protractor lets you plot any angle with ease and absolute accuracy
- T-Bar and see-through crosshairs provide perfect alignment
- 6-inch centering scale with micro-fine marking holes at every 1/32 inches
- Four angle scales, including one for marking narrow stock
- Micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals
- See more on Amazon...
Brand: INCRA | Manufacturer: Incra
Dimensions: 0.95 x 5.90 x 11.45 inches | Weight: 0.20 Pounds
Warranty: See Manufacturer's Website for Details
See On Amazon #8
Peachtree Woodworking Supply Adjustable Replacement Tool Rest Sharpening Jig for 6 inch or 8 inch Bench Grinders and Sanders Includes a Pivoting Miter Slide and Flat Miter Slide for Easy Tool Honing
Asin: B0049RD9YO | Ean: 0810948016403 | UPC: 810948016403
The Sharpening Jig Can Be Used With 6" Or 8" Bench Grinders And On Many Belt Sanders/Grinders. It Quickly And Easily Mounts Directly To The Bench In Front Of The Grinder With A Track Style Base And Can Be Readily Folded Out Of The Way For Freehand Grinding If So Desired. It Can Also Be Completely Removed By Loosening The Large Wing Knob And Sliding The Jig From The Track Base..
The Unique Ratcheting Handles Lock The Adjustable Rest Solidly In Position And Can Be Moved Out Of The Way After Locking To Keep From Accidentally Bumping Them. You Can Easily Move The Tool Rest From One Grinder Wheel To Another Or Quickly Remove It From The Bench When Not Needed For Grinding. Some Assembly Required. The Bench Top Wood Mounting Screws Are Included..
Another Great Feature Is That The Jig Can Be Adjusted Forward And Backward For Just The Right Angle. Some Aftermarket And Expensive Tool Rests Don’T Move And Adjust In This Fashion. This Can Be Very Limiting Your Ability To Be Accurate With Your Angles. The Platform Straddles Wheels Up To 1" Wide. The Jig Also Now Includes Internal Lock Washer For Even More Stability!.
The Sharpening Jig Works With Most Power Or Hand Grinders That Has Or Had A Tool Rest. It Is The Ideal Replacement For The Factory Tool Rest That Comes With Many Bench Grinders. The Jig Offers Much More Flexibility In Terms Of What You Can Get Done Than With The Standard Factory Tool Rest. The Plate Is Offset For Short Chisels, Such As Japanese Or Western Butt Chisels..
Features
- The Adjustable Replacement Tool Rest Sharpening Jig will allow you to locate all the basic sharpening positions with your bench grinder (grinder not included). The unique miter slide tool holder design allows the jig to be used more or less as a stone, which easily guides your blades, turning tools and chisels. Solid aluminum construction provides you with a smooth sliding, side to side action when sharpening.
- The sharpening jig works with most power or hand grinders that has or had a tool rest. It is the ideal replacement for the factory tool rest that comes with many bench grinders. The jig offers much more flexibility in terms of what you can get done than with the standard factory tool rest. The plate is offset for short chisels, such as Japanese or western butt chisels.
- The Sharpening jig can be used with 6 or 8 bench grinders and on many belt sanders/grinders. It quickly and easily mounts directly to the bench in front of the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base.
- Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests don t move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1 wide. The Jig also now includes internal lock washer for even more stability!
- The unique ratcheting handles lock the adjustable rest solidly in position and can be moved out of the way after locking to keep from accidentally bumping them. You can easily move the tool rest from one grinder wheel to another or quickly remove it from the bench when not needed for grinding. Some assembly required. The bench top wood mounting screws are included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.20 pounds
See On Amazon #9
Snappy Tools Quick-Change 5-Pc. Countersink Drill Bit Set. Proudly Made in The USA.
Asin: B000XXZME8 | Model: 40030 | PartNumber: 40030 | Ean: 5915903786669, 0787721610090, 0735090674038, 0762234400307, 0043968596710 | UPC: 735090674038, 787721610090, 043968596710, 762234400307
Ideal For Plugs Or Dowel Buttons. The 1/4" Hex Shank Can Be Used With Power Drills And Quick-Change Chucks..
Made In Usa By Snappy; Includes 5 Gold Screw Countersinks: 5/64X3/8, 3/32X3/8, 7/64X3/8, 1/8X3/8 & 9/64X1/2.
Experience The Higher Quality Of Snappy Tools. Combining Higher Quality Materials And Patented Technology, Snappy Delivers Industrial Quality Tools To The Tradesman And Do-It-Yourself Markets At An Affordable Price..
Snappy Tools Countersinks Will Drill The Pilot Hole And Countersink Or Counter-Bore For Screws In One Step. Countersink To Drive The Head Of The Screw Flush With Or Slightly Below The Surface.
Features
- In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws.
- Snappy Tools Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface
- Ideal for plugs or dowel buttons. The 1/4 hex shank can be used with power drills and quick-change chucks.
- Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price.
- Made in USA by Snappy; Includes 5 Gold Screw Countersinks: 5/64x3/8, 3/32x3/8, 7/64x3/8, 1/8x3/8 & 9/64x1/2
- See more on Amazon...
Brand: Make it Snappy | Manufacturer: Make it Snappy
Dimensions: 0.80 x 8.50 x 5.65 inches | Weight: 0.44 pounds
See On Amazon #10
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)
Asin: B07ZTJT9GC | Model: 2206 | PartNumber: 2206 | Ean: 0817918022440 | UPC: 817918022440
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 8-1/2 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search