HICTOP PEI Sheet PEI Spring Steel 235x235 and Magnetic Build Plate with Adhesive PEI Bed for Ender-3 Pro/Neo, Ender-3 V2/Neo Ender-3/Neo 3D Printers
Asin: B08PFHBR2D | Model: PEI | PartNumber: PEI | Ean: 0602309981976 | UPC: 602309981976
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On The Hictop Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Sheet Is 235*235Mm（9.25*9.25Inch）, It Is Applicable With Creality 3D Printer Such As Ender-3 Pro/Neo, Ender-3 V2/Neo，Ender-3/Neo, Ender-5, Ender-5 Pro，Cr-20, Cr-20 Pro And Similarly Sized Machines..
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Pei Spring Steel 235X235 Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Features
- 1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The Pei Spring Steel 235x235 is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI sheet is 235*235mm 9.25*9.25inch , it is applicable with Creality 3D printer such as Ender-3 Pro/Neo, Ender-3 V2/Neo Ender-3/Neo, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon Similar To HICTOP PEI Sheet PEI Spring
#1
Comgrow PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 235x235mm for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro
Asin: B07XBM24HN | Ean: 6973298330422
Easy Model Removal-The Pei Spring Steel 235X235 Is Easy To Adhere To The Printing Surface, Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Wide Application - The Pei Sheet 235X235 Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3V2/ Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High Ressistance-Our Ender 3 Pei Build Plate Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
All New Functionality - The Flexible Surface Of The Ender 3 Pro Pei Bed Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models.No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
Features
- WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.
- ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.
- EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.
- HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- WIDE APPLICATION - The PEI sheet 235x235 is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.79 x 7.87 x 7.87 inches
See On Amazon #2
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 pounds
See On Amazon #3
Double-Sided Textured PEI Sheet 3D Printer Bed 235mm*235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1-Pro/Ender 5-Pro/Ender 3 V3 KE/SE
Asin: B0C2D5NDX8 | Model: 1 | PartNumber: 1 | Ean: 0795847035253 | UPC: 795847035253
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 9.25 x 9.25 x 0.08 inches | Weight: 1.06 pounds
See On Amazon #4
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
Polymaker ASA Filament 1.75mm Grey, 1kg ASA 3D Printer Filament, Heat & Weather Resistant - ASA 3D Filament Perfect for Printing Outdoor Functional Parts, Dimensional Accuracy +/- 0.03mm
Asin: B09DKR3BTG | Model: PF01003 | PartNumber: PF01003 | Ean: 6938936709961
🔮 【Matte Finish】 - Polylite Asa Grey Is A 3D Filament Asa With A Very Special Matte Finish Which Makes The Final Print Look Very Smooth And High Quality. (Matter Surface Than Regular 3D Abs Grey Filament ) - Note: Turn Off The Fan For Better Mechanical Properties, Turn It On At 30% For Higher Print Quality. Selected Color: Grey Asa Filament 1.75Mm ( Similar To Grey Abs Filament 1.75Mm ).
⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50Mm/S (Settings Can Be Adjusted Depending On The 3D Printer, You Can Refer To The 3D Printer Abs 1.75Mm Filament Settings) To Print Large Parts Without Warping Issue, We Recommend Using An Enclosed Printer To Maintain A Warm Enviroment Around The Print.
🛡️ 【Risk Free & Lifetime Technical Support】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
♻️ 【Cardboard Spool】 - Comes In Upgraded 3.0 Version Packaging With Fully Recycled Cardboard Spool And Box.
🌡 ️【High Heat Resistance And Mechanical Properties】 - Polylite Asa Can Resist Temperatures Up To 100˚C (212°F) And Display High Toughness And Impact Resistance For Functional Application. ( Same Properties As 3D Printer Filament Abs ).
Features
- Weather Resistant - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories
- High Heat Resistance and Mechanical Properties - PolyLite ASA can resist temperatures up to 100 C (212 F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS )
- Matte finish - PolyLite ASA Grey is a 3D filament ASA with a very special matte finish which makes the final print look very smooth and high quality. (Matter surface than regular 3D ABS Grey Filament ) - Note: turn off the fan for better mechanical properties, turn it on at 30% for higher print quality. Selected color: Grey ASA filament 1.75mm ( similar to Grey ABS filament 1.75mm )
- Cardboard Spool - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- Printing Settings - Nozzle: 250 C; Bed: 90 C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm enviroment around the print
- RISK FREE & LIFETIME TECHNICAL SUPPORT - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 2.76 x 6.30 x 6.30 Inches | Weight: 2.20 Pounds
See On Amazon #6
Creality Official Ender 3 Bed Upgraded, PEI Sheet Removable Magnetic Flexible Heated Bed Build Plate Surface Bed Cover for Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE 235X235mm
Asin: B09WK7BDBX
❤【Great Adhesion & Easy Take Mold】Print Molds Onto Pei Sheet Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety. With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Mold Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
👍【Simple Installation】Our Pei Steel Sheet Is Easy To Install And The Installation Time Is Less Than 2 Minutes. Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
⭕【Wide Application】The Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c, Please Remove The Two Positioning Screws On The Hotbed First.) Pei Sheets Can Withstand The Numerous Heat Cycles That A 3D Printer Bed Goes Through From Print To Print..
Features
- Quality Assurance 100% Official Creality 3D Printer PEI Sheet Removable Magnetic Flexible Heated Bed Platform has three overlaps, heat resistant and durable. The flexible spring steel platform is in the middle, covered with an imported PEI surface on it, which can be resistant to 200 C and has high strength with no deformation. And a magnetic base at the bottom can withstand a long time of work with the 3d printer heated bed at a high temperature of 70 C.
- Wide Application The PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C, please remove the two positioning screws on the hotbed first.) PEI sheets can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Great Adhesion & Easy Take Mold Print molds onto PEI sheet surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Simple Installation Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #7
PEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Neptune 3 Pro/Neptune 4/Kobra/Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1 3D Printer
Asin: B082PFL8TX
Easy To Install - The Build Surface Adhesive Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower Adhesive Surface On Top Of Normal Build Plate. High Strength And Reusable..
Note - If You Have Any Question Or Need Technical Support About The Product, Please Press "Ask A Question" Through Our Storefront's Page, Report An Issue Through The “Your Orders” Page. We Will Respond With 24 Hours..
Excellent Adhesion & Removable - Upgrades Magnetic Build Surface Provides The Best Adhesion. Once The Hotbed Cools Back To Room Temperature, Lift Off The Mat And Gently Bend The Magnetic Surface, The Base Will Release The Model Which Can Be Easily Removed By Hand..
Excellent Adhesion & Removable - Upgrades Magnetic Build Surface Provides The Best Adhesion. Once The Hotbed Cools Back To Room Temperature, Lift Off The Mat And Gently Bend The Magnetic Surface, The Base Will Release The Model Which Can Be Easily Removed By Hand..
Features
- Size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3/Kobra, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Note - If you have any question or need technical support about the product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.01 x 9.25 x 9.25 Inches
See On Amazon #8
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 Inches
Warranty: 2 years
See On Amazon #9
HzdaDeve Textured PEI Sheet and Smooth PEO Build Plate 235x235mm Spring Steel Print Bed Magnetic Base for K1/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1 Pro/Ender 3 V2 Neo/Sovol SV05/SV06/SV07 (PEO+PEI)
Asin: B0CCL2NJS8
Peo+Pei Design: One Side Is A Textured Pei Bed Which Presents The Frosted Sticker Surface With A Distinctive Frosted Touch. Another Side Is A Smooth Diamond Peo Sheet Which Is Easy To Remove And Clean. The Pei Bed Can Be Resistant To 200°C For The Nozzle Without Deformation. The Black Magnetic Sticker Can Work At A High Temperature Of 130°C..
It's Easy To Remove The Prints When The Pei Sheet 235X235 Cools Down To Around 40°C. If It's Stuck, Please Gently Bend The Build Plate To Pop It Off..
Simple Installation: Peel Off The Backing Paper And Stick It To The Bed, Finally Place The Pei Steel Plate On The Magnetic Sheet..
Package Includes: Pei And Peo Sheet + Adhesive Magnetic Sticker (Total 2 Packs), The Bed Sheet Size Is 235X235mm..
Features
- Compatible Printer: This 235X235mm PEY+PEI bed is compatible with Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/K1/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender 3 V2 Neo/Ender 3 V2/SV05/SV06/SV07 3D Printer.
- Package Includes: PEI and PEO sheet + adhesive magnetic sticker (total 2 packs), the bed sheet size is 235x235mm.
- PEO+PEI Design: One side is a textured PEI bed which presents the frosted sticker surface with a distinctive frosted touch. Another side is a smooth diamond PEO sheet which is easy to remove and clean. The PEI bed can be resistant to 200 C for the nozzle without deformation. The black magnetic sticker can work at a high temperature of 130 C.
- Simple Installation: Peel off the backing paper and stick it to the bed, finally place the PEI steel plate on the magnetic sheet.
- It's easy to remove the prints when the PEI sheet 235x235 cools down to around 40 C. If it's stuck, please gently bend the build plate to pop it off.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #10
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Gold
Asin: B0C2HNZWTG | Model: PEI Build Plate Platform | PartNumber: PEI Build Plate Platform | Ean: 0850055848238 | UPC: 850055848238
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
First Available: 02/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.16 x 9.25 Inches
Warranty: 1 year garantie
See On Amazon #11
Gizmo Dorks PEI Sheet 3D Printer Build Surface 300mm x 300mm (11.8" x 11.8") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVL1SYF | Model: GD-PEI3M-300MM | PartNumber: GD-PEI3M-300MM | Ean: 0887503182125 | UPC: 887503182125
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 300Mm X 300Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 300mm x 300mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 11.80 x 11.80 Inches
See On Amazon #12
Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Neptune 3 Pro/Neptune 4/Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo 3D Printer
Asin: B09TVYJXDH
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #13
SUNLU 3D Printer Bed,PEI Magnetic Build Textured Surface, Gold Frosted PEI Sheet for 3D Printers, 9.25x9.25inchs (235x235mm), 2 PCS PEI Sheet Black+Gold +1 PC Base Sticker Sheet
Asin: B0BWXGHC4K
③【Durability Easy To Clean 】Sunlu Pei Magnetic Build Plate Has Long Service Life Of Stainless Steel.Sunlu Pei 3D Printer Bed Adhesive Use A Soft Cloth To Clean The Dust. Gently Wipe The Stain With Low Concentration Of Alcohol..
⑤【Super Easy Print Removal】 Sunlu 3D Printer Platforms Pei Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model. The Prints Are Pretty Easy To Remove Once You're Done Printing..
④【Stronger Magnetic Ddhesion】Sunlu Pei 3D Printer Bed More Flexible And Resistant To Bending.Great First-Layer Adhesion,Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform.Sunlu Magnetic 3D Printer Bed Platforms Had Solid Adhesion And The Print Went Well..
②【Frosted Surface】Sunlu Pei Magnetic Sheet Printing Board Has Smooth Surface, Which Will Not Leave Any Trace On The Bottom Of The Printed Material. There Is A Good Combination Of Hot Melt Material And Printing Layer, Which Can Reduce The Deformation Caused By Shrinkage And Avoid Warping..
Features
- Packing List (3PCS) SUNLU 3D printer PEI magnetic build plate size 235*235mm 9.25*9.25inch . 3 pieces sheet in total: 2 pieces of PEI Print Surface Sheet Gold+Black and 1 piece of sticker base sheet.
- Frosted Surface SUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.
- Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.
- Stronger Magnetic Ddhesion SUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
- Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon #14
Double Sided Textured PEI Sheet, 3D Printer Parts Printing Plate Frosted PEI Surface 310 x 310 mm for CR-10 CR-10S Anet A8+, E12,3D Printers(Without Magnetic Bottom Sheet)
Asin: B09YY4L4K1 | Model: MY001 | PartNumber: MY001 | Ean: 0705548422535 | UPC: 705548422535
【High Temperature Resistance】:Genuine Pei Powder Coating Is Heat Resistant Which Temperature Resistance Can Be Up To 200℃ With No Deformation.
【Easy To Use】Pei Spring Steel Easy To Remove The Plastic Parts By Bending And Popping It Off When Cooling, Easy To Print, Easy To Maintain.
【Textured Surface】:The Textured Side Makes The Bottom Of The Prints Show A Matte Texture And Retain The Frosted Feeling.And Perfect For Pla/Abs/Tpu/Pefg/Nylon..
【Double-Sided】】:Pei Magnetic Flexible Bed Has Double-Sided Pei Coating, Both Sides Can Be Used..
Features
- Upgrade PEI Sheet :310mm x 310mm/12.2x12.2 inch, compatible with CR-10 10S Pro CR-X MP Maker Pro, Long LK1/ PRO LK5 PRO/Artilery X1ease measure your bed, not rely on build volume/printing size.
- Double-sided :PEI magnetic Flexible bed has double-sided PEI coating, both sides can be used.
- High Temperature Resistance :Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200 with no deformation
- Textured Surface :The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling.And perfect for PLA/ABS/TPU/PEFG/Nylon.
- Easy to use PEI Spring steel Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain
- See more on Amazon...
Brand: MYOSOTIS | Manufacturer: china
See On Amazon #15
ENOMAKER CR-10 PEI Spring Steel Bed Plate Magnetic Double Sided Sheet Smooth and Textured Platform Removable Bed Sticker Flexible Build Surface for Creality CR-10 CR-10S,310x310mm
Asin: B0BDL6YGBJ | Model: ENO-Dual-PEI-310 | PartNumber: ENO-Dual-PEI-310 | Ean: 0764481225610 | UPC: 764481225610
【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture + Smooth Pei Sheet】One Side Frosted, One Side Smooth, Two Kinds Of Surface To Meet Your Different Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR10,CR-10S, CR-10 S3, Sidewinder X1/X2 etc.
- Double Sided Texture + Smooth PEI Sheet One side frosted, one side smooth, two kinds of surface to meet your different printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #16
Creality Official Double Sided PEI Sheet and Magnetic Sticker 235*235mm, Golden PEI Smooth + Textured Spring Flexible Build Plate for 3D Printer Ender-3/3 S1/3 S1 Pro/5S1 Ender-3 Neo/3 V2 Neo/3 V3 SE
Asin: B0BCGFLJHD | Model: 3D-Double-PEI-G | PartNumber: 3D-Double-PEI-G
【More Stable Molding】The High-Strength Spring Steel Plate Is Only 0.4Mm Thick, And The Strong Magnetic Stickers Can Maintain High Magnetic Properties Under High Temperature, Which Reduces The Inertia Of The Platform Movement During Printing And Help The 3D Printer Run Smoothly..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy To Remove】With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Model Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【Double Sided】Two Different Build Surfaces Meet Different Printing Needs. One Side Is Pel Film With Smooth Surface, And Has A Good Effect On The Model Bottom Surface; Another Side Is The Golden Textured Pei Has High Adhesion, And The Model Is Not Easy To Warp. The Double-Sided Build Plate Combines The Advantages Of The Textured/Smooth Pel And Can Be Switched Freely..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Gold PEI surface is of strong high temperature stability, flame retardant, heat resistance, high strength, wear resistance and good printing stability.The spring steel plate not only has high flatness but also has good elasticity, it is not deformed after repeated bending.
- Double Sided Two different build surfaces meet different printing needs. One side is PEl film with smooth surface, and has a good effect on the model bottom surface; Another side is the golden textured PEI has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEl and can be switched freely.
- More Stable Molding The high-strength spring steel plate is only 0.4mm thick, and the strong magnetic stickers can maintain high magnetic properties under high temperature, which reduces the inertia of the platform movement during printing and help the 3D printer run smoothly.
- Easy to remove With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the model can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Creality Ender 3 Removable PEI Magnetic Flexible Spring Steel Plate Heated Bed 235x235mm for Ender 3 S1/Ender 3 V2/Ender 3 V2 Neo/Ender 3/Ender 3 Pro/Ender 5/Voxelab Aquila C2 3D Printer
Asin: B08B84QSQG | Model: CR-PEI-235 | PartNumber: CR-PEI-235 | Ean: 0738627014222 | UPC: 738627014222
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Compatible With Pla、Petg、Peek、Abs And Any Other Filaments..
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance
- Compatible with PLA PETG PEEK ABS and any other filaments.
- No more tape, no more glue, no more shovel, and release your printing anxiety
- Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 1.57 Pounds
See On Amazon #18
Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm (9.3" x 9.3") with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA
Asin: B07GSJSDWR | Model: GD-PEI3M-235MM | PartNumber: GD-PEI3M-235MM | Ean: 0887503182606 | UPC: 887503182606
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 235 X 235Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Ender 3 Or Creality Cr 20 Perfectly!.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 235 x 235mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality Ender 3 or Creality CR 20 perfectly!
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 9.25 x 9.25 inches | Weight: 0.13 pounds
See On Amazon #19
SUNLU PEI Sheet, Magnetic 3D Printer Bed with Frosted Textured, 235x235mm PEI Plate Flexible Printing Surface, 2 PCS PEI Sheet(Black+Gold)+1PC Base Sticker Sheet
Asin: B0C3G2NT54
✔【 Sunlu Pei Packaging List】Sunlu 3D Printer Pei Magnetic Build Plate Size 235*235Mm. You Will Receive 3 Pieces: 2 Pieces Of Pei Sheet (Gold+Black) And 1 Piece Of Sticker Base. Sunlu Pei Magnetic Bed Has A Long Service Life And Guaranteed Quality, Making It The Perfect Choice For 3D Printer Platforms..
✔ 【High Compatibility&Easy To Clean】 Sunlu Pei Magnetic Sheet Can Withstand Temp Up To Around 200°C, Making It The Perfect Choice For Most 3D Printing Materials Such As Pla, Petg, Abs, Tpu, Etc. → It's Easy To Clean The Sunlu Pei Surface, Using A Soft Cloth To Remove Surface Dust, Or Gently Wiping Stains With Low Concentration Alcohol..
✔ 【Frosted Surface With Stronger Magnetism】The Pei Coating On The Surface Makes It Durable, And Not Easily Scratched, Preventing Nozzle Damage To The Platform; The Surface Of The Sunlu Pei Sheet Surface Is Smooth, And The Hot Melt Material Adheres Well To The Printing Layer. It Is Resistant To Falling, And Not Easily Deformed (Without Glass Bed Breakage Issue)..
✔ 【Easy To Remove】The Pei 3D Printer Plate Is Excellent In 3D Printing Applications As It Can Withstand Countless Thermal Cycles By 3D Printing Platforms. This Pei Magnetic Sheet Is Easy To Remove, And The Flexible Pei Surface Can Be Bent Randomly. The Printing Model Is Easy To Remove And Be Smooth Without Leaving Any Marks At The Bottom..
Features
- Excellent adhesion SUNLU PEI Magnetic Sheet has excellent magnetic, adhesion, and elasticity. The printing surface can effectively adhere to various printing materials. Compared with traditional 3D printer bed, it can better prevent edge warping. You can easily remove your printed model by bending it slightly, which is efficient and useful.
- Easy to remove The PEI 3D printer plate is excellent in 3D printing applications as it can withstand countless thermal cycles by 3D printing platforms. This PEI magnetic sheet is easy to remove, and the flexible PEI surface can be bent randomly. The printing model is easy to remove and be smooth without leaving any marks at the bottom.
- SUNLU PEI Packaging List SUNLU 3D printer PEI magnetic build plate size 235*235mm. You will receive 3 pieces: 2 pieces of PEI sheet (gold+black) and 1 piece of sticker base. SUNLU PEI magnetic bed has a long service life and guaranteed quality, making it the perfect choice for 3D printer platforms.
- Frosted surface with stronger magnetism The PEI coating on the surface makes it durable, and not easily scratched, preventing nozzle damage to the platform; The surface of the SUNLU PEI sheet surface is smooth, and the hot melt material adheres well to the printing layer. It is resistant to falling, and not easily deformed (without glass bed breakage issue).
- High compatibility&easy to clean SUNLU PEI magnetic sheet can withstand temp up to around 200 C, making it the perfect choice for most 3D printing materials such as PLA, PETG, ABS, TPU, etc. It's easy to clean the SUNLU PEI surface, using a soft cloth to remove surface dust, or gently wiping stains with low concentration alcohol.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon
Looking For Something Else?
Search