SUNLU 3D Printer Bed,PEI Magnetic Build Textured Surface, Gold Frosted PEI Sheet for 3D Printers, 9.25x9.25inchs (235x235mm), 2 PCS PEI Sheet Black+Gold +1 PC Base Sticker Sheet
Asin: B0BWXGHC4K
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.③【Durability Easy To Clean 】Sunlu Pei Magnetic Build Plate Has Long Service Life Of Stainless Steel.Sunlu Pei 3D Printer Bed Adhesive Use A Soft Cloth To Clean The Dust. Gently Wipe The Stain With Low Concentration Of Alcohol..
⑤【Super Easy Print Removal】 Sunlu 3D Printer Platforms Pei Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model. The Prints Are Pretty Easy To Remove Once You're Done Printing..
④【Stronger Magnetic Ddhesion】Sunlu Pei 3D Printer Bed More Flexible And Resistant To Bending.Great First-Layer Adhesion,Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform.Sunlu Magnetic 3D Printer Bed Platforms Had Solid Adhesion And The Print Went Well..
②【Frosted Surface】Sunlu Pei Magnetic Sheet Printing Board Has Smooth Surface, Which Will Not Leave Any Trace On The Bottom Of The Printed Material. There Is A Good Combination Of Hot Melt Material And Printing Layer, Which Can Reduce The Deformation Caused By Shrinkage And Avoid Warping..
Features
- Packing List (3PCS) SUNLU 3D printer PEI magnetic build plate size 235*235mm 9.25*9.25inch . 3 pieces sheet in total: 2 pieces of PEI Print Surface Sheet Gold+Black and 1 piece of sticker base sheet.
- Frosted Surface SUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.
- Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.
- Stronger Magnetic Ddhesion SUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
- Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon Similar To SUNLU 3D Printer BedPEI Magnetic
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 inches | Weight: 0.66 pounds
See On Amazon #2
Comgrow PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 235x235mm for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro
Asin: B07XBM24HN | Ean: 6973298330422
Easy Model Removal-The Pei Spring Steel 235X235 Is Easy To Adhere To The Printing Surface, Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Wide Application - The Pei Sheet 235X235 Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3V2/ Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High Ressistance-Our Ender 3 Pei Build Plate Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
All New Functionality - The Flexible Surface Of The Ender 3 Pro Pei Bed Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models.No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
Features
- WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.
- ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.
- EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.
- HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- WIDE APPLICATION - The PEI sheet 235x235 is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.79 x 7.87 x 7.87 inches
See On Amazon #3
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #4
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #5
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Black
Asin: B0C4SMLYCK | Model: DB-PEI-Black | PartNumber: DB-PEI-Black | Ean: 0850055848542 | UPC: 850055848542
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
First Available: 05/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.20 x 9.25 inches
Warranty: 1 year garantie
See On Amazon #7
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality 3D | Manufacturer: Creality 3D
See On Amazon #8
Creality Original Ender 3 Bed,Ultra-Flexible Removable Magnetic Build Plate, 3D Printer Build Surface for Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/CR 20/CR 20 Pro, 235X235MM
Asin: B09GM8NGXG | Model: platform001 | PartNumber: platform001
Easy To Install: The Build Surface Consists Of An Upper Magnetic Build Surface And A Lower Magnetic Adhesive Base. Place The Lower 3M Adhesive Surface On Top Of The 3D Printer Build Plate Then You Can Start To Print Your Models..
Note: Before Installation, Please Make Sure The Bottom Of The Soft Magnetic Adhesive Is Firmly Attached To The Upper Layer, If It Cannot Be Attached, Please Rotate 90 Degrees And Try Again Until It Is Fully Attached.Please Don't Use Acetone To Wipe The Thin Layer Left By The Models..
Customizable: This Magnetic Bed Replacement Can Be Easily Cut To Any Size. Suitable For All Fdm Printer Models, As Well As All Heated And Unheated 3D Printer Beds. Suitable Materials: Pla.
Excellent Performance: The Magnetic Bed Is Highly Flexible And Heat Resistant, Up To 70°C Without Demagnetization. The Heating Speed Is Fast And Uniform, Ensuring That The Bottom Of The Finished Model Is Delicate And Not Warped. It Is Durable, Easy To Clean With Alcohol And Can Be Used Repeatedly..
Features
- Easy to Remove the Print: The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.
- Excellent Performance: The magnetic bed is highly flexible and heat resistant, up to 70 C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.
- Easy to Install: The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.
- Customizable: This magnetic bed replacement can be easily cut to any size. Suitable for all FDM printer models, as well as all heated and unheated 3D printer beds. Suitable materials: PLA
- Note: Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models.
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.79 pounds
See On Amazon #9
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #10
Official Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S/Ender 3 Max/Ender 3 Max Neo/SV06 Plus/SV04 IDEX/Longer LK5 Pro 3D Printer 310X310MM
Asin: B07JFH3MFK | Model: CR-10-Magnetic | PartNumber: CR-10-Magnetic | Ean: 0667797511692 | UPC: 667797511692
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands.
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.93 pounds
See On Amazon #11
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 inches
Warranty: 2 years
See On Amazon #12
Creality Official Ender 3 Bed Upgraded, PEI Sheet Removable Magnetic Flexible Heated Bed Build Plate Surface Bed Cover for Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE 235X235mm
Asin: B09WK7BDBX
❤【Great Adhesion & Easy Take Mold】Print Molds Onto Pei Sheet Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety. With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Mold Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
👍【Simple Installation】Our Pei Steel Sheet Is Easy To Install And The Installation Time Is Less Than 2 Minutes. Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
⭕【Wide Application】The Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c, Please Remove The Two Positioning Screws On The Hotbed First.) Pei Sheets Can Withstand The Numerous Heat Cycles That A 3D Printer Bed Goes Through From Print To Print..
Features
- Quality Assurance 100% Official Creality 3D Printer PEI Sheet Removable Magnetic Flexible Heated Bed Platform has three overlaps, heat resistant and durable. The flexible spring steel platform is in the middle, covered with an imported PEI surface on it, which can be resistant to 200 C and has high strength with no deformation. And a magnetic base at the bottom can withstand a long time of work with the 3d printer heated bed at a high temperature of 70 C.
- Wide Application The PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C, please remove the two positioning screws on the hotbed first.) PEI sheets can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Great Adhesion & Easy Take Mold Print molds onto PEI sheet surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Simple Installation Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #13
PEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Neptune 3 Pro/Neptune 4/Kobra/Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1 3D Printer
Asin: B082PFL8TX
Easy To Install - The Build Surface Adhesive Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower Adhesive Surface On Top Of Normal Build Plate. High Strength And Reusable..
Note - If You Have Any Question Or Need Technical Support About The Product, Please Press "Ask A Question" Through Our Storefront's Page, Report An Issue Through The “Your Orders” Page. We Will Respond With 24 Hours..
Excellent Adhesion & Removable - Upgrades Magnetic Build Surface Provides The Best Adhesion. Once The Hotbed Cools Back To Room Temperature, Lift Off The Mat And Gently Bend The Magnetic Surface, The Base Will Release The Model Which Can Be Easily Removed By Hand..
Excellent Adhesion & Removable - Upgrades Magnetic Build Surface Provides The Best Adhesion. Once The Hotbed Cools Back To Room Temperature, Lift Off The Mat And Gently Bend The Magnetic Surface, The Base Will Release The Model Which Can Be Easily Removed By Hand..
Features
- Size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3/Kobra, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.
- Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
- Note - If you have any question or need technical support about the product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.01 x 9.25 x 9.25 inches
See On Amazon #14
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 Pounds
See On Amazon #15
YOOPAI Double-Sided PEI+PEO Sheet and Flexible Magnetic Build Plate, 235 * 235mm 3D Printer Bed Platform for Creality K1/K1C/Ender 3/Ender 5 S1/Ender 3 Pro/Ender 3 V3/Ender 3 S1 Pro/Ender 3 Neo
Asin: B0CNP6KJX9 | Model: PEI+PEO-235-BK | PartNumber: PEI+PEO-235-BK | Ean: 0850055848245 | UPC: 850055848245
Simple Set-Up: The Build Plate Consists Of Two Parts - A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive Backing. Simply Attach The Magnetic Base Plate To The Printer's Hotbed And Affix The Pei+Peo Sheet To The Bottom For Instant Printing Without Any Complex Setup Procedures..
Wide Application: With A Size Of 235*235Mm (9.25*9.25Inch), This Build Plate Is Compatible With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, And Other Similarly-Sized Fdm 3D Printers. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Peo Surface Is Perfect For Printing Pla Filaments, While The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Not Only Gain Two Different Printing Effects But Also Double The Usage Time, Making It A Cost-Effective Choice..
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides - one diamond textured PEO coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to a wide range of filaments, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEO surface is perfect for printing PLA filaments, while the PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you not only gain two different printing effects but also double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of two parts - a flexible steel platform and a magnetic bottom sheet with adhesive backing. Simply attach the magnetic base plate to the printer's hotbed and affix the PEI+PEO sheet to the bottom for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Wide Application: With a size of 235*235mm (9.25*9.25inch), this build plate is compatible with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, and other similarly-sized FDM 3D printers. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
First Available: 02/02/2024
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.10 x 9.25 x 9.25 inches
Warranty: 180 Days Garantie
See On Amazon #16
Official Creality Ender 3 V3 SE 3D Printer, Upgraded Ender 3, 250mm/s 2500mm/s Fast 3D Printer, Auto Leveling, Direct Extruder, PC Spring Steel Bed, Auto-Load Filament, Print Size 8.66x8.66x9.84in
Asin: B0CK22DMXT
【Quick Assembly & Pc Spring Steel Build Plate】Creality Ender 3 V3 Se 3D Printer Equiped Pc Spring Steel Build Plate，The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Creality Ender 3 V3 Se 3D Printer Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assembly, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Responsible After-Sales Service And Lifetime Technical Support】If You Have Any Problems About Official Creality Ender 3 V3 Se 3D Ptinter, Please Feel Free To Contact Us Through Amazon, We Will Quickly Respond Within 24 Hours..
【Auto Filament Loading & Unloading】The Creality Ender 3 V3 Se 3D Printer Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Sprite Direct Extruder & Hassle-Free Auto Leveling】Creality Ender-3 V3 Se "Sprite" Direct Extruder Works Well With Pla, Petg, And Flexible Tpu, Unlocking Your Creative Potential. And The Extruder Is Market-Proven For Its Reliability. Creality Ender-3 V3 Se Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset, Making Leveling Much Easier..
Features
- 250mm/s 2500mm/s High Speed Printing & High Precision Quality Creality Ender 3 V3 SE supports a maximum printing speed of 250mm/s, 2500mm/s acceleration, saving 73% of the time compared with other regular 3D printers. The speed has been greatly improved while maintaining the printing quality.
- Sprite Direct Extruder & Hassle-free Auto Leveling Creality Ender-3 V3 SE Sprite direct extruder works well with PLA, PETG, and flexible TPU, unlocking your creative potential. And the extruder is market-proven for its reliability. Creality Ender-3 V3 SE features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset, making leveling much easier.
- Quick Assembly & PC spring steel build plate Creality Ender 3 V3 SE 3D Printer equiped PC spring steel build plate The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Creality Ender 3 V3 SE 3D Printer Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assembly, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading The Creality Ender 3 V3 SE 3D Printer Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- Responsible After-Sales Service and Lifetime Technical Support If you have any problems about Official Creality Ender 3 V3 SE 3D Ptinter, Please feel free to contact us through Amazon, we will quickly respond within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.00 x 22.00 x 15.00 inches | Weight: 15.77 pounds
Warranty: 1 Year Warranty
See On Amazon #17
Creality Ender 3 S1 Build Plate, Magnetic Bed Ender 3 for Ender 3 V2 for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07J9VGX54 | Model: creality ender 3 glass build plate | PartNumber: creality ender 3 glass build plate
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
More Flat For Precision: Super Flatness. Fast And Uniform Heating. More Precise On Printing, Especially The Bottom Of The Prints..
Ender 3 Plate Replacement：Durability & Easy Clean: It Is Capable To Work At 70ºc. Easy Clean With Alcohol..
Easy Removal Of Prints: Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands. The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible..
Features
- SIZE: 235mm x 235mm. Ender 3 mat is suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
- EASY REMOVAL OF PRINTS: Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- Ender 3 plate replacement DURABILITY & EASY CLEAN: It is capable to work at 70 C. Easy clean with alcohol.
- MORE FLAT FOR PRECISION: Super Flatness. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #18
Creality 3D Printer Magnetic Build Surface Flexible Removable Heated Bed Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro/CR 20/CR 20 Pro Cover 235X235MM
Asin: B0899ZF9QW | Ean: 6971636400097
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower Adhesive Surface On Top Of Normal Build Plate..
More Flat For Precision: Super Flatness. Fast And Uniform Heating. More Precise On Printing, Especially The Bottom Of The Prints..
Durability & Easy Clean: It Is Capable To Work At 70ºc. Easy Clean.
Easy Removal Of Prints: Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands. The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible..
Features
- SIZE: 235mm x 235mm. Suitable for all FDM printer models all heated and non-heated 3D printer beds.
- EASY REMOVAL OF PRINTS: Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate.
- DURABILITY & EASY CLEAN: It is capable to work at 70 C. Easy clean
- MORE FLAT FOR PRECISION: Super Flatness. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
- See more on Amazon...
Brand: Creality | Manufacturer: TOPLINKALL
See On Amazon #19
Creality Ender 3 Build Plate 235x235mm Double-Sided Magnetic Bed Plate Smooth/Textured Flexible Removable Printing Platform for Ender 3 V2/Ender 3 Pro/Ender 3 S1/3 S1 Pro/Ender 5/5S/5 Pro
Asin: B0C1GS8J8G | Ean: 0198549004419 | UPC: 198549004419
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Ender 3 Magnetic Bed Plate Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Original Quality】- You Will Get 100% Original Creality 235X235mm Double Side Pei Sheet X1. We Provide Fast And Friendly Customer Service To Solve Your Problem Within 24 Hours. If You Have Any Questions, Please Do Not Hesitate To Contact Us..
【Wide Application】- This Ender 3 Build Plate Is Compatible With Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To Be Compatible With Ender-3 S1/Ender-3 S1 Pro, Please Remove The Two Positioning Screws On The Hotbed First. The Double Side Pei Printing Surface Is Compatible With Pla, Petg, Peek, Abs And Any Other Filaments..
【Thin And Light】- The Thickness Of This Ender 3 Bed Plate Is Only 1.2Mm. Thin Thickness Can Reduce The Inertia Of The Platform's Movement And Prevent It From Shaking During Printing. This Helps 3D Printers Run Smoothly And Improve Printing Quality..
Features
- 2 in 1 - One side is a smooth PEI surface. The PEI material ensures that your 3D prints adhere well to the bed and do not warp or move during printing. The smooth PEI surface makes sure that your model has a flat bottom. The other side is a textured sticker. This results in better adhesion and less warping, which leads to better prints overall.
- Thin And Light - The thickness of this Ender 3 bed plate is only 1.2mm. Thin thickness can reduce the inertia of the platform's movement and prevent it from shaking during printing. This helps 3D printers run smoothly and improve printing quality.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The Ender 3 magnetic bed plate has excellent elasticity and it is not deformed after repeated bending.
- Wide Application - This Ender 3 build plate is compatible with Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first. The double side PEI printing surface is compatible with PLA, PETG, PEEK, ABS and any other filaments.
- Original Quality - You will get 100% Original Creality 235x235mm double side PEI sheet x1. We provide fast and friendly customer service to solve your problem within 24 hours. If you have any questions, please do not hesitate to contact us.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #20
Official Creality Ender 3 Double Sided PEI Sheet Magnetic Flexible Steel Build Plate 235*235mm, Smooth +Textured Heated Bed Platform for 3D Printer Ender-3 S1/3 S1 Pro/5S1 Ender-3 Neo/3 V2 Neo/3 V3 SE
Asin: B0BCGJQCRF | Model: 3D-Double-PEI-Black-Gold | PartNumber: 3D-Double-PEI-Black-Gold
【Easy To Remove】With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Model Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】The Double Sided Pei Sheet Can Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Pei Sheet 3D Printer Bed Perfect Printing Size Works Well With Ender 3/Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender-3 Neo/Ender-3 V2 Neo/Ender-3 V3 Se, Please Remove The Two Positioning Screws On The Hotbed First.).
【Double Sided】One Side Is A Smooth Pei Surface, Which Used For The Flat Model, Great Adhesion And Easy To Remove Printings. And The Textured Side Has Excellent Adhesion And Easy Printing Without Any Warping. You Can Get Two Different Printing Experiences With One Plate..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Smooth one side with coated PEl and Textured the other side with textured sticker. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Double Sided One side is a smooth PEI surface, which used for the flat model, great adhesion and easy to remove printings. And the textured side has excellent adhesion and easy printing without any warping. You can get two different printing experiences with one plate.
- Easy to remove With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the model can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- Wide Application The double sided PEI sheet can compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3/Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender-3 Neo/Ender-3 V2 Neo/Ender-3 V3 SE, please remove the two positioning screws on the hotbed first.)
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search