SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 Pounds
See On Amazon Similar To SUNLU Magnetic Build Surface Good
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 Inches | Weight: 0.55 pounds
See On Amazon #2
OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 2kg Spool (4.4lbs), Dimensional Accuracy Probability +/- 0.02mm, Fit Most FDM Printers (Black (2-Pack))
Asin: B0834428DQ | Model: OVPETG175 | PartNumber: OVPETG175 | Ean: 0810031290864 | UPC: 810031290864
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Insure These Tough Pla Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy (98%) + / - 0.02 Mm Without Any Exaggeration.
【Risk-Free & Lifetime Service】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Service. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Clog-Free & Bubble-Free】 Designed And Manufactured With Our Patented Clog-Free Formula To Get A Smooth And Seamless Printing Experience. All Spools Undergo Thorough Drying For 24 Hours Before Packaging And Are Vacuum-Sealed In Resealable Foil Packaging. To Maintain Optimal Performance, Store Petg Filament In Sealed Storage With Desiccants (Silica Gel) Or Dry For >6 Hours At 65˚C.
Features
- High Performance & Compatibility Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and improved mechanical properties of ABS, including enhanced impact resistance and superior layer adhesion
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to get a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store PETG filament in sealed storage with desiccants (silica gel) or dry for >6 hours at 65 C
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Service Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 Pounds
See On Amazon #3
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #4
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
ELEGOO 235x235mm PEI Sheet Magnetic Build Plate, PEI Spring Steel Flexible Platform with Adhesive Bed for Neptune 3 Pro 3D Printer
Asin: B0C8NXD22S
Easy To Install - Only Need To Put The Magnetic Bottom Sheet Onto Your Heated Bed. The Steel Platform With Pei Surface Is On The Top. No More Mess.
High Compatibility - Not Only Compatible With Elegoo Neptune 3 Pro, But Also Fit Most Fdm 3D Printers With 235X235mm Bed.
Easy To Remove Prints - Elegoo Build Plate Is Flexible Enough To Remove Your Prints Simply By Bending The Plate Without Losing Durability.
Excellent Adhesion - The Powder-Coated Pei Plate Is Heat-Resistant. It Ensures Great Bed Adhesion When Printing And Make Prints Not Easy To Warp.
Features
- Original Spare Part - ELEGOO flexible magnetic build plate with sprayed one-sided PEI coating, size 235x235mm/9.25 x9.25
- Excellent Adhesion - The powder-coated PEI plate is heat-resistant. It ensures great bed adhesion when printing and make prints not easy to warp
- Easy to Install - only need to put the magnetic bottom sheet onto your heated bed. The steel platform with PEI surface is on the top. No more mess
- Easy to Remove Prints - ELEGOO build plate is flexible enough to remove your prints simply by bending the plate without losing durability
- High Compatibility - Not only compatible with ELEGOO Neptune 3 Pro, but also fit most FDM 3D printers with 235x235mm bed
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #6
OVERTURE PLA Plus (PLA+) Filament 1.75mm PLA Professional Toughness Enhanced PLA Roll, Cardboard Spool, Premium PLA 1kg(2.2lbs), Dimensional Accuracy Probability +/- 0.02mm (Orange)
Asin: B07VCMSZ96 | Model: UK-MATTEPLA17511 | PartNumber: UK-MATTEPLA17511 | Ean: 0810031290055 | UPC: 810031290055
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Insure These Tough Pla Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy (98%) + / - 0.02 Mm Without Any Exaggeration.
【Risk-Free & Lifetime Service】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Service. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Clog-Free, Bubble-Free & Easy-To-Use】Designed And Manufactured With Clog-Free Patent To Insure A Smoother And More Stable Printing Experience With Overture Pla Plus Rolls. Complete Drying For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In A Transparent Bag, No Bubble And Easy To Print. Full Mechanical Winding And Strict Manual Examination, To Make Sure The Line Tidy And Less-Tangle, So As To Avoid Possible Snap And Line Breaking.
Features
- Designed for exceptional performance Overture PLA Professional features a dramatically improved fracture toughness (5X of regular PLA). Our professional-grade PLA also features high purity, low shrinkage, and superb layer bonding, ensuring optimized printing quality
- Clog-Free, Bubble-Free & Easy-to-use Designed and Manufactured with Clog-Free patent to insure a smoother and more stable printing experience with Overture PLA Plus Rolls. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubble and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Service Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 pounds
See On Amazon #7
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #8
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #9
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #10
Official Creality Ender 3 V3 SE Build Plate 235x235 Original Textured PEI Sheet Magnetic Flexible Spring Steel Build Plate for Ender 3/Ender 3 V2/Ender 3 V3 KE/Ender 3 V3 SE/K1/K1C
Asin: B0CTQSMSJZ
High Quality Spring Steel - Crafted From High-Precision Spring Steel, Our Build Plate Ensures Exceptional Flatness, Guaranteeing Uniform Layer Adhesion During Printing. Its Elasticity Eases Prints Removal By Gently Bending. The Durable Plate Withstands Heating, Cooling Cycles, And Bending For Extended Use. Excellent Thermal Conductivity Ensures Even Heat Distribution, Preventing Object Contraction Or Deformation, Significantly Enhancing 3D Printing Quality, Convenience, And Durability..
In Order To Save Your Costs And Minimize Unnecessary Waste, This Product Only Includes An Ender 3 V3 Se Pei Sheet Without Magnetic Sheet. Therefore, It Is Suitable For Users Whose Original Magnetic Sticker Is Still Functional. If The Original Magnetic Sticker Is Damaged, Please Consider Purchasing The Build Plate Kit That Includes Magnetic Sheet..
Efficient Magnetic Board Design - The Printing Board Features A Magnetic Suction Design, Greatly Simplifying Base Replacement For Enhanced Convenience. With Dual Handles For Improved Grip, It Facilitates Easy And Secure Disassembly And Installation. Cleverly Positioned Holes Ensure Swift, Accurate Alignment, Preventing Model Displacement During Printing. Overall, The Design Prioritizes Swift Installation And Convenient Disassembly, Meeting Users' Demands For Efficient 3D Printing..
The Pei Coating Is Characterized By Its Wear Resistance And High-Temperature Durability. It Is Not Easily Scratched And Is Widely Applicable To Various Printing Materials. It Provides Reliable Adhesion To The Model Under Both High And Low Temperatures, Ensuring Stable 3D Printing Without Warping And Significantly Improving The Success Rate Of Prints..
Features
- Official Original Build Plate - Offical Creality Ender 3 V3 SE build plate, with dimensions of 235x235mm and a printing area of 220x220mm. Additionally, it is compatible with other FDM printers of the same size, such as Ender 3, Ender 3S, Ender 3 S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2, Ender 3 V2 Neo, Ender 3 V3, Ender 3 V3 KE, Ender 3 V3 SE, Ender 5, Ender 5S, Ender 5 S1, Ender 5 Pro, K1, K1C, KR, CR 10 SE, CR20, CP 01, etc.
- The PEI coating is characterized by its wear resistance and high-temperature durability. It is not easily scratched and is widely applicable to various printing materials. It provides reliable adhesion to the model under both high and low temperatures, ensuring stable 3D printing without warping and significantly improving the success rate of prints.
- High Quality Spring Steel - Crafted from high-precision spring steel, our build plate ensures exceptional flatness, guaranteeing uniform layer adhesion during printing. Its elasticity eases prints removal by gently bending. The durable plate withstands heating, cooling cycles, and bending for extended use. Excellent thermal conductivity ensures even heat distribution, preventing object contraction or deformation, significantly enhancing 3D printing quality, convenience, and durability.
- Efficient Magnetic Board Design - The printing board features a magnetic suction design, greatly simplifying base replacement for enhanced convenience. With dual handles for improved grip, it facilitates easy and secure disassembly and installation. Cleverly positioned holes ensure swift, accurate alignment, preventing model displacement during printing. Overall, the design prioritizes swift installation and convenient disassembly, meeting users' demands for efficient 3D printing.
- In order to save your costs and minimize unnecessary waste, this product only includes an Ender 3 V3 SE PEI sheet without magnetic sheet. Therefore, it is suitable for users whose original magnetic sticker is still functional. If the original magnetic sticker is damaged, please consider purchasing the build plate kit that includes magnetic sheet.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #11
3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
Asin: B09WZSGXFL | Model: CR-Power PEI-235mm | PartNumber: CR-Power PEI-235mm | Ean: 0747976885032 | UPC: 747976885032
Two-In-One Type Of Pei Powder Coated Hardended Steel Spring Sheet Nerver Disforming, Magnetic Base With Strong Magnetism.
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
Easy To Install, Easy To Remove The Models By Bending Or Popping It Off.
Size: 235Mm X 235Mm..
Features
- Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Ender 5 ,Ender 5 Pro ,CR 20 Pro. Aquila X2.
- Size: 235mm x 235mm.
- Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
- Easy to install, easy to remove the models by bending or popping it off
- No more tape, no more glue, no more shovel, and release your printing anxiety
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 1.12 Pounds
See On Amazon #12
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 Inches
Warranty: 2 years
See On Amazon #13
YOOPAI Double-Sided PEI+PEO Sheet and Flexible Magnetic Build Plate, 235 * 235mm 3D Printer Bed Platform for Creality K1/K1C/Ender 3/Ender 5 S1/Ender 3 Pro/Ender 3 V3/Ender 3 S1 Pro/Ender 3 Neo
Asin: B0CNP6KJX9 | Model: PEI+PEO-235-BK | PartNumber: PEI+PEO-235-BK | Ean: 0850055848245 | UPC: 850055848245
Simple Set-Up: The Build Plate Consists Of Two Parts - A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive Backing. Simply Attach The Magnetic Base Plate To The Printer's Hotbed And Affix The Pei+Peo Sheet To The Bottom For Instant Printing Without Any Complex Setup Procedures..
Wide Application: With A Size Of 235*235Mm (9.25*9.25Inch), This Build Plate Is Compatible With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, And Other Similarly-Sized Fdm 3D Printers. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Peo Surface Is Perfect For Printing Pla Filaments, While The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Not Only Gain Two Different Printing Effects But Also Double The Usage Time, Making It A Cost-Effective Choice..
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides - one diamond textured PEO coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to a wide range of filaments, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEO surface is perfect for printing PLA filaments, while the PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you not only gain two different printing effects but also double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of two parts - a flexible steel platform and a magnetic bottom sheet with adhesive backing. Simply attach the magnetic base plate to the printer's hotbed and affix the PEI+PEO sheet to the bottom for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Wide Application: With a size of 235*235mm (9.25*9.25inch), this build plate is compatible with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, and other similarly-sized FDM 3D printers. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
First Available: 02/02/2024
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.10 x 9.25 x 9.25 inches
Warranty: 180 Days Garantie
See On Amazon #14
Kingroon PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool(2.2lbs), 1.75 mm, White
Asin: B0BR81QQRJ | Model: yyds1 | PartNumber: yyds1 | Ean: 0793127238363 | UPC: 793127238363
No Edge Warping, Fluidity And Smooth Discharge: High-Precision Printing, High Translucency, No Edge Warping, No Clogs, No Bubbles..
Petg Filament Setting Recommendations: Printing Temperature 210-230°C (230°C Recommended), Build Plate Temperature 65-80°C,Printing Speed 40-80Mm/S.
Strong Impact Resistance: With Outstanding Toughness And High Resistance, Petg Combines The Good Mechanical Properties Of Abs With High Toughness. At The Same Time, It Has Good Printing Performance That Pla Is Easy To Use And Not Easy To Warp..
Features
- Transparency and stability:The surface of the PETG filament has good gloss, the layer lines are seamless, and invisible, it is not easy to absorb moisture, the stability is good, and it is hard to produce cracks.
- Strong impact resistance: With outstanding toughness and high resistance, PETG combines the good mechanical properties of ABS with high toughness. At the same time, it has good printing performance that PLA is easy to use and not easy to warp.
- No edge warping, fluidity and smooth discharge: High-precision printing, high translucency, no edge warping, no clogs, no bubbles.
- PETG Filament Setting Recommendations: Printing temperature 210-230 C (230 C recommended), Build plate temperature 65-80 C,Printing speed 40-80mm/s
- See more on Amazon...
Brand: Kingroon | Manufacturer: Kingroon
Weight: 2.20 Pounds
Warranty: 1 year
See On Amazon #15
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality 3D | Manufacturer: Creality 3D
See On Amazon #16
Creality Smooth PEI Build Plate, Original Magnetic K1 3D Printer Build Bed, for Creality K1, Ender 3 V3 SE/KE, Ender-3 S1, Ender-3 S1 Pro, Ender-5 S1 and All 235 * 235mm Size 3D Printer
Asin: B0CGWP9NNL | Model: 3DP-ACC42-GFS-315310-PEO | PartNumber: 3DP-ACC42-GFS-315310-PEO | Ean: 9356813081646
High-Strength Spring Steel Plate: Not Easy To Deform, Made Of High-Strength Spring Steel Plate, With Good Flatness, Good Elasticity, And No Deformation After Repeated.
After Sales Support : We Provide Professional After-Sales Service. Please Kindly Contact Us Directly Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question. Note:Compatible Fdm 3D Printers With A Build Plate Size Of 235×235Mm.
Easy Model Removal: Easy To Remove Printed Models, One Second To Take Off Printed Models Without Tools, Just By Bending The Plate. Suit For K1/ Ender 3 V3 Se/ Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo. Note: Not Work With K1c.
High Strength And Wear Resistance: Pei Material Has The Characteristics Of High Temperature Resistance, Excellent Flame Retardancy, High Strength And High Rigidity, Suitable For Long-Term Use Under High Temperature Conditions.
Features
- Excellent Adhesion: Good adhesion between smooth PEI and various filaments, the model is easy to stick to PEI and the bottom surface is smooth. Strong magnetic force not easy to dislocate
- High Strength and Wear Resistance: PEI material has the characteristics of high temperature resistance, excellent flame retardancy, high strength and high rigidity, suitable for long-term use under high temperature conditions
- High-strength Spring Steel Plate: Not easy to deform, made of high-strength spring steel plate, with good flatness, good elasticity, and no deformation after repeated
- Easy Model Removal: Easy to Remove Printed Models, One second to take off printed models without tools, just by bending the plate. Suit for K1/ Ender 3 V3 SE/ Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo. Note: Not work with K1C
- After Sales Support : We provide professional after-sales service. Please kindly contact us directly our customer service will respond to you within 24 hours no matter what the question. Note:Compatible FDM 3D printers with a build plate size of 235 235mm
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 12.20 x 12.40 x 0.04 Inches | Weight: 1.00 Pounds
See On Amazon #17
Wefuit 3D Upgraded PEO+PET Sheet 235x235m, Smooth PEO PET Build Plate Spring Steel Print Bed for Creality K1/K1C/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender V3 KE/Ender3 V3 SE (Without Magnetic Base)
Asin: B0CNPV9YN6
【 Easy To Remove】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness..
【Compatible 3D Printers】The Double-Sided Smooth Peo+Smooth Pet Print Bed Suitable For 3D Printers With 235X235mm Platform Size, Such As Suitable For Ender-3 S1/Ender-3 S1 Pro /Ender-5 S1/Eal/K1/K1c/Ender-3 V3 Ke/Ender-3 V3 Se. The Design Of The Positioning Hole Makes The Pei Sheet Installation More Convenient.Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Resistance And Compatible Filaments】The Peo Print Bed Surface Is Resistant To High Temperature 150℃ And Smooth Pet Coating Bed Is 120℃. After Our Extensive Testing, We Recommend Peo+Pet To Print Pla / Tpu /Petg，If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion For First Printing Layer】The Model Can Be Firmly Attached To The Surface Of The Print Bed.Easily Print Even For A Newbie. Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
Features
- Upgraded build plate Double-sided PEO+PET spring steel plate,One side is upgraded PEO film .PEO looks like countless diamonds on the surface,which make your eyes light up.The other side is classic carbon fiber pattern-PET film.the bottom of the printed model is smooth One build plate has two beautiful patterns. The bottom of the prints will leave a unique pattern.
- Excellent adhesion for first printing layer The model can be firmly attached to the surface of the print bed.Easily print even for a newbie. Please let the build plate cool down before remove the model to avoid damaging the coating.
- Easy to Remove The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness.
- High Resistance and Compatible Filaments The PEO print bed surface is resistant to high temperature 150 and smooth PET coating bed is 120 . After our extensive testing, we recommend PEO+PET to print PLA / TPU /PETG If you want to print other filaments, please adjust the parameters.
- Compatible 3D Printers The double-sided smooth PEO+smooth PET print bed suitable for 3D printers with 235x235mm platform size, such as suitable for Ender-3 S1/Ender-3 S1 Pro /Ender-5 S1/eal/K1/K1C/Ender-3 V3 KE/Ender-3 V3 SE. The design of the positioning hole makes the PEI Sheet installation more convenient.Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #18
Creality Ender 3 S1 Original Print Platform Kit Magnetic Flexible Removable Spring Steel Texture Surface Print Build Plate Sheet for Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1 Pro/Ender 3 V3 SE 235x235mm
Asin: B0B297V4Z5 | Model: 3D-AC-3S1-Bed | PartNumber: 3D-AC-3S1-Bed
✨【Great Adhesion】Print Molds Onto Pc Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🎁【Easy Take Mold】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
🎈【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/Ender 3 Neo/ Ender 3 S1/ Ender 3 S1 Pro/ Ender 3 V2/ Ender 3 V2 Neo/ Ender 5/ Ender 5 S1/ Ender 3 V3 Se/Ender 3 V3 Ke/Cr 10 Se K1/K1c And Other Same Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The Soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/Ender 3 Neo/ Ender 3 S1/ Ender 3 S1 Pro/ Ender 3 V2/ Ender 3 V2 Neo/ Ender 5/ Ender 5 S1/ Ender 3 V3 SE/Ender 3 V3 KE/CR 10 SE K1/K1C and other same sized beds.
- Great Adhesion Print molds onto PC build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Mold Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #19
Ender 3 S1 Plus Frosted PC Build Plate Magnetic Flexible Bed 310x315mm for CR-10/10S Pro/MP Maker Pro Long LK1/ PRO LK5 PRO/Ender 3 Max 3D Printer
Asin: B0B8HDRSYF | Model: CR-PC Plate-310mm | PartNumber: CR-PC Plate-310mm
【The Pc Texture Surface With Good Adhesion, The Model Can Be Firmly Attached To The Surface Of The Print Platform. 】.
【Size:310X315mm,Fit For Cr-10/10S Pro/Cr-10 Smart/Cr-10 Smart Pro/Mp Maker Pro Long Lk1/ Pro Lk5 Pro/Ender 3 Max/Ender 3 S1 Plus 】.
【The Spring Steel Can Be Flexed And Bended Thousands Of Times Without Deformation. 】.
【The Pc Spring Steel Plate With Flexibility And Tenacity In The Middle Makes It Easier To Take Out The Prints, Flex Slightly To Pop Your Print Right Off.】.
Features
- Note: This product is not for use with high-temperature printing applications above 60*C..The innovative platform included two plates, the top plate is spring steel plate with PC surface, the bottom plate is magnetic plate with sticker.
- The PC Spring steel plate with flexibility and tenacity in the middle makes it easier to take out the prints, flex slightly to pop your print right off.
- the PC texture surface with good adhesion, the model can be firmly attached to the surface of the print platform.
- The spring steel can be flexed and bended thousands of times without deformation.
- Size:310x315mm,fit for CR-10/10S Pro/CR-10 Smart/CR-10 Smart Pro/MP Maker Pro Long LK1/ PRO LK5 PRO/Ender 3 Max/Ender 3 S1 Plus
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search