10s BMS, 36V BMS, 10s BMS 36V, Active Balancer, 35A 10S 36V Lithium Battery Board, Li-on Battery Board with Balance for Ternary Cobalt Cells
Asin: B08PFZ4DN5 | Model: Yosoo Health Geartexh2f7b98 | PartNumber: Yosoo Health Geartexh2f7b98
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Stability ]: This 36V Lithium Battery Board Can Provide Stable , Such As Overcurrent , Overdischarge , Short Circuit Detection Delay, Etc.
[Applicable]: This Li-On Battery Board Can Be Used For Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries.
[Correct Board]: This Bms Board Must Select The Correct Board And Use Method, Otherwise It Will Greatly Affect The Battery Life.
[Balance Function]: This Battery Board Has A Balance Function, Which Can Effectively Ensure The Uniformity Of Charging.
Features
- [Separated Interface]: The charging and discharging connectors of this board with balance are separated, the maximum charging current is 8A, and the continuous discharge current is 35A
- [Balance Function]: This battery board has a balance function, which can effectively ensure the uniformity of charging
- [Stability ]: This 36v lithium battery board can provide stable , such as overcurrent , overdischarge , short circuit detection delay, etc
- [Correct Board]: This bms board must select the correct board and use method, otherwise it will greatly affect the battery life
- [Applicable]: This li-on battery board can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
- See more on Amazon...
Brand: Yosoo Health Gear | Manufacturer: Yosoo Health Gear
Dimensions: 0.79 x 5.91 x 3.94 Inches | Weight: 0.14 pounds
See On Amazon Similar To 10s BMS 36V BMS 10s
#1
Bisida 16S BMS 60V 50A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (16S 60V 50A)
Asin: B0CC2M1Y6S | Model: 16S 60V 50A | PartNumber: 16S 60V 50A | Ean: 0749755120976 | UPC: 749755120976
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 year
See On Amazon #2
Bisida 24S BMS 72V 50A Lifepo4 Battery Management System PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Lifepo4 Battery Pack (24S 72V 50A)
Asin: B0CC9BGK1B | Model: 24S 72V 50A | PartNumber: 24S 72V 50A | Ean: 0749755334755 | UPC: 749755334755
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.2V) Lifepo4 Battery Charging And Discharging In Zones From 2.3V To 3.65V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, Downtime protection Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.2V) Lifepo4 battery charging and discharging in zones from 2.3V to 3.65V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 Year
See On Amazon #3
HiLetgo 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance
Asin: B07X28845M | Model: 3-01-1548 | PartNumber: 3-01-1548
Working Current: 30A .Charging Voltage: 16.8V-18V,The Best Is 17V.Size:56*48*4Mm..
Main Function: Over Charge Protection, Over Discharge Protection Function, Short Circuit Protection Function, Over Current Protection Function, Balance..
High-Accuracy Voltage Detection Circuit, Fine Workmanship And Durable..
Features
- 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance.
- High-accuracy voltage detection circuit, fine workmanship and durable.
- Working current: 30A .Charging voltage: 16.8V-18V,the best is 17v.Size:56*48*4mm.
- Main function: Over charge protection, over discharge protection function, short circuit protection function, over current protection function, balance.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
36V 35A 10Series Cell Li Ion Batteries BMS PCB Board with Balancing Overcharge for Li-ion Battery Cell Pack, Ternary, Manganese Acid and Cobalt Acid Batteries
Asin: B075MDQ92X | Model: Walfrontu1y8fwvpsg | PartNumber: Walfrontu1y8fwvpsg | Ean: 0736691576042 | UPC: 736691576042
Wide Battery Compatibility: Our Protection Board Is Suitable For Li Ion Batteries Of Ternary, Manganese Acid, And Cobalt Acid Batteries. A Versatile Solution For A Variety Of Battery Types..
And Reliable: Built To Withstand Long-Term Use, Ensuring Protection For Your Batteries Without Compromising Performance. Invest In The Health Of Your Batteries Through Our And Dependable Protection Board..
User-Friendly: Easy Installation And Straightforward Operation. Our Protection Board Aims To Make Your Battery Use A Hassle- Experience. A Must-Have Accessory For Maintaining Your Batteries' Health..
Advanced Balancing System: Our Product Features An Intricate Balancing System To Maintain Your Batteries In Perfect Harmony Ensuring Their Optimal Functionality And Longevity..
Features
- High-Quality Protection: 36V 35A 10Series Cell Li Ion Batteries BMS PCB Protection Board offers top-rate overcharge protection for 10 Series Cell Li Ion Batteries. Efficient in shielding your Ternary, Manganese Acid, and Cobalt Acid Batteries from potential damages.
- Advanced Balancing System: Our product features an intricate balancing system to maintain your batteries in perfect harmony ensuring their optimal functionality and longevity.
- Wide Battery Compatibility: Our Protection Board is suitable for Li Ion Batteries of Ternary, Manganese Acid, and Cobalt Acid Batteries. A versatile solution for a variety of battery types.
- User-Friendly: Easy installation and straightforward operation. Our Protection Board aims to make your battery use a hassle- experience. A must-have accessory for maintaining your batteries' health.
- and Reliable: Built to withstand long-term use, ensuring protection for your batteries without compromising performance. Invest in the health of your batteries through our and dependable protection board.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.11 pounds
See On Amazon #5
DKARDU 4 pcs 3S 40A PCB Protection Board 18650 Lithium Battery Protection Board Li-ion Lithium Battery Charger PCB BMS 11.1V 12V 12.6V with Balance Charging with Nickel Strip
Asin: B0CD2DJPKK | Model: JK-US-689 | PartNumber: JK-US-689
【Current And Voltage】: Charging Voltage: Dc 12.6V~13.6V;Continuous Discharge Current: Maximum 40A (If The Heat Dissipation Environment Is Not Good, Please Reduce The Load Current);Continuous Charging Current: Maximum 20A..
【Scope Of Application】: The Protection Board Is Suitable For Lithium-Ion Batteries, And Can Also Be Used For Ternary Batteries, Manganese Acid Batteries, And Cobalt Acid Batteries..
【Note】: Do Not Mix Good Batteries And Bad Batteries Together, And New And Old Batteries Can't Be Used Together.Strictly According To The Diagram Wiring，0V/4.2V/8.4V/12.6V..
【Multiple Protection】: The Protection Board Has Precise Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection And Other Protection Functions..
Features
- What it does : The 3S 40A protection board can effectively prevent various problems encountered when charging the battery and avoid accidents.
- Multiple protection : The protection board has precise overcharge protection, over discharge protection, overcurrent protection, short circuit protection and other protection functions.
- Current and voltage : Charging voltage: DC 12.6V~13.6V;Continuous discharge current: maximum 40A (if the heat dissipation environment is not good, please reduce the load current);Continuous charging current: maximum 20A.
- Note : Do not mix good batteries and bad batteries together, and new and old batteries can't be used together.Strictly according to the diagram wiring 0V/4.2V/8.4V/12.6V.
- Scope of application : The protection board is suitable for lithium-ion batteries, and can also be used for ternary batteries, manganese acid batteries, and cobalt acid batteries.
- See more on Amazon...
Brand: DKARDU | Manufacturer: DKARDU
See On Amazon #6
Bisda 13S BMS 48V 50A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (13S 48V 50A)
Asin: B0CC1VZ5DT | Ean: 0749755120822 | UPC: 749755120822
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
See On Amazon #7
3S 11.1V/12V/12.6V 50A Balance Battery BMS PCB Board with Balance
Asin: B07DNJL1F8 | Ean: 0763741472245 | UPC: 763741472245
Stable: Stable Various Protective Functions For Charging And Discharging, Such As Overcharge , Over-Discharge And Short Circuit . This Battery Board Is Committed To Providing Optimized Performance By Managing The Battery Discharge And Ensuring The Battery Capacity Reaches Its Optimal State..
Complete Cycle Balancing: The Battery Board Ensures Balanced Charging And Discharging Of Your Battery Cells Throughout The Complete Cycle, Compromising Neither The Effectiveness Nor The Lifespan Of Your Batteries..
Use Safety: 3S 12V Bms Board Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time. Choosing The Correct Board And Applying It Appropriately Is Vital To The Longevity Your Batteries..
Materia: Charging Connector And Discharging Connector Are Same, Continuous Discharging Current Is 50A. Discover The Benefit Of A 3S 50A Lithium-Ion Battery Board, Designed To Significantly Increase The Lifespan And Efficiency Of Your Batteries..
Features
- WIDE APPLICATION:The li-ion battery board is for 3 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
- MATERIA: Charging connector and discharging connector are same, continuous discharging current is 50A. Discover the benefit of a 3S 50A lithium-ion battery board, designed to significantly increase the lifespan and efficiency of your batteries.
- STABLE: Stable various protective functions for charging and discharging, such as overcharge , over-discharge and short circuit . This Battery Board is committed to providing optimized performance by managing the battery discharge and ensuring the battery capacity reaches its optimal state.
- USE SAFETY: 3S 12V BMS board has balance function which would ensure each battery cell being fully charged at same time. Choosing the correct board and applying it appropriately is vital to the longevity your batteries.
- COMPLETE CYCLE BALANCING: The battery board ensures balanced charging and discharging of your battery cells throughout the complete cycle, compromising neither the effectiveness nor the lifespan of your batteries.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #8
ALMOCN 5PCS 3S BMS Module 12V 10A 18650 Lithium Battery Protection Board Charger Module
Asin: B08JPYSWTV | Model: DA09221 | PartNumber: DA09221 | Ean: 0701715441149 | UPC: 701715441149
Over-Discharge Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection Functions..
Applicable To : Vacuum Cleaner, Massager Battery Pack, Led Light Backup Power Supply, 12V Electronic Products, Solar Street Light Battery Pack, Monitoring Standby Power Supply, Etc..
Built-In Three-Stage Over-Current Detection Circuit (Over-Current 1, Over-Current 2, Or Load Short Circuit).
High-Accuracy Voltage Detection Circuit, Fine Workmanship And Durable,Compact Size And Lightweight..
Features
- Can be applied to various 3.7V lithium core.
- High-accuracy voltage detection circuit, fine workmanship and durable,compact size and lightweight.
- Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection functions.
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit)
- Applicable to : vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- See more on Amazon...
Brand: ALMOCN | Manufacturer: ALMOCN
See On Amazon #9
Bisida 15S BMS 54V 30A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (15S 54V 30A)
Asin: B0CC2DH25B | Model: 15S 54V 30A | PartNumber: 15S 54V 30A | Ean: 0749755120914 | UPC: 749755120914
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Dimensions: 3.00 x 5.00 x 4.00 Inches
Warranty: 1-year
See On Amazon #10
AEDIKO 6pcs 3S 20A BMS 18650 Li-ion Lithium Battery Charger Module BMS Protection Board PCB 11.1V 12V 12.6V Module Over-Discharge/Over-Current
Asin: B09MLXFH81 | Ean: 0701715501195 | UPC: 701715501195
Charging Voltage: 12.6V;Continuous Discharge Current (Upper Limit) : 20A (When The Heat Dissipation Environment Is Not Good,Please Reduce The Load Current ).
Applications:Vacuum Cleaner,Massager Battery Pack, Led Light Backup Power Supply,12V Electronic Products, Solar Street Light Battery Pack, Monitoring Standby Power Supply Etc..
It Can Meet Various Performance Requirements And Ensure The Absolute Safety And Reliability Of The Battery Pack.
High Accuracy Voltage Detection Circuit, Fine Workmanship And Reliable Quality.
Features
- 3S 20A BMS:Maximum Output Current: 20A;Quiescent Current: <30uA
- High Accuracy Voltage Detection Circuit, Fine Workmanship and Reliable Quality
- Charging Voltage: 12.6V;Continuous Discharge Current (upper limit) : 20A (When the Heat Dissipation Environment is NOT Good,Please Reduce the Load Current )
- It can Meet Various Performance Requirements and Ensure the Absolute Safety and Reliability of the Battery Pack
- Applications:Vacuum Cleaner,Massager Battery Pack, LED Light Backup Power Supply,12V Electronic Products, Solar Street Light Battery Pack, Monitoring Standby Power Supply etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon
Looking For Something Else?
Search