Z Whip LS Cylinder Head Dowel Alignment Pin Assembly Split Roll Pin Compatible with all GM Chevy 1997-Current LS & LT Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L L83 L86 LT1 LT4 Vortec
Asin: B08QJNRQFW | Ean: 0810065200495 | UPC: 810065200495
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.These Are Required When Installing The Cylinder Heads To The Engine Block. Many Times These Are Lost Or Damaged On Disassembly..
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
Compatible With All Ls/Lt Series Engines 1997-Current Gen 3/4/5 Ls1, Ls2, Ls3, Ls6, Ls7, Ls9, Gm Vortec 4.8L 5.3L 6.0L 6.2L Lt1 Lt4 L83 L86.
Features
- Set of 4 Steel LS/LT Cylinder Head Alignment Pins
- Compatible with ALL LS/LT Series Engines 1997-Current GEN 3/4/5 LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8L 5.3L 6.0L 6.2L LT1 LT4 L83 L86
- These are required when installing the cylinder heads to the engine block. Many times these are lost or damaged on disassembly.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
See On Amazon Similar To Z Whip LS Cylinder Head
#1
YAKEFLY Brake Caliper Piston Rewind Tool, Brake Piston Wind Back Tool,Car Rear Brake Pad Wind Back Tool,Right Handle Set Brake Caliper Wind Back Tool for for Replacement of Rear Brake Pad
Asin: B0C8CH6TZM | Model: 586DSSCFBTZGJ001 | PartNumber: 586DSSCFBTZGJ001
[Easy To Use] The Car Rear Brake Pad Retraction Tool Is Easy To Use, And There Are Retraction Pistons On Both The Left And Right Threaded Piston Calipers, Making The Operation Simple..
[Applicable] The Handle Set Brake Caliper Winding Tool Is Very Suitable For Removing/Installing Press Fit Parts, Such As Ball Joints, Universal Joints, And Truck Brake Fixing Pins..
[Efficient Tool] The Brake Caliper Piston Winding Tool Is Used To Install The Brake Pads Of Domestic And Imported Cars And Trucks With Return Air Piston Calipers..
[Size]The Distance Between The Adapter Plates And The Centers Of The Pins Is Approximately 22 Millimeters To 32 Millimeters..
Features
- [Durable Material] The piston coiling tool of Disc brake caliper is made of 45 steel, which has a long service life, high hardness and is not easy to deform.
- [Size]The distance between the adapter plates and the centers of the pins is approximately 22 millimeters to 32 millimeters.
- [Easy to Use] The car rear brake pad retraction tool is easy to use, and there are retraction pistons on both the left and right threaded piston calipers, making the operation simple.
- [Efficient Tool] The brake caliper piston winding tool is used to install the brake pads of domestic and imported cars and trucks with return air piston calipers.
- [Applicable] The handle set brake caliper winding tool is very suitable for removing/installing press fit parts, such as ball joints, universal joints, and truck brake fixing pins.
- See more on Amazon...
Brand: YAKEFLY | Manufacturer: YAKEFLY
Warranty: no
See On Amazon #2
Zlirfy Brake Caliper Piston Rewind Tool,Car Accessories Car Rear Brake Pad Wind Back Tool for Disk Brake Pad,Right Handle Set Brake Caliper Wind Back Tool for Replacement of Rear Brake Pad
Asin: B0CF4BHJ7K | Model: 786DSSCFBTZZ002 | PartNumber: 786DSSCFBTZZ002
[Product Specification]The Distance Between The Adapter Board And The Center Of The Pin Is Approximately 22 Millimeters To 32 Millimeters..
[Applicable] The 3-Piece Brake Caliper Rewinding Tool Is Suitable For Most Disc Brake Calipers Installed On Right-Hand Threaded Vehicles, And Is Suitable For Most Domestic And Imported Cars With Right-Hand Threads..
[Easy To Use] The Retractable Tool For The Rear Brake Pads Of Automobiles Is Convenient To Use, And There Are Retractable Pistons On Both The Left And Right Threaded Piston Calipers. Easy To Operate..
[Function] Use A T-Shaped Handle Or Outer Hexagonal Head 19 For Operation, Used To Reset The Brake Piston When Replacing The Brake Pads..
Features
- [Durable Material] The brake caliper piston winding tool is made of chrome vanadium steel, which is hard and not easy to break, has high reliability and practicality, is durable, and has a long service life.
- [Function] Use a T-shaped handle or outer hexagonal head 19 for operation, used to reset the brake piston when replacing the brake pads.
- [Product Specification]The distance between the adapter board and the center of the pin is approximately 22 millimeters to 32 millimeters.
- [Easy to Use] The retractable tool for the rear brake pads of automobiles is convenient to use, and there are retractable pistons on both the left and right threaded piston calipers. Easy to operate.
- [Applicable] The 3-piece brake caliper rewinding tool is suitable for most disc brake calipers installed on right-hand threaded vehicles, and is suitable for most domestic and imported cars with right-hand threads.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #3
RACOONA 2PCS Muffler Exhaust Wash Plug,Dirt Bike Accessories Muffler Exhaust Tail Pipe Plug,0.6"-1.5"/1.1"-1.8" Wash Plug,Fit for Most Motorcycle Bike 2 Stroke Rubber Exhaust Silencer (0.6"-1.5")
Asin: B0CHF6FYG3 | Model: 915XSQPQS001 | PartNumber: 915XSQPQS001
[Function] The Rubber Structure Ensures A Tight Fit And Effectively Seals The Exhaust Pipe, Ensuring Smooth And Uninterrupted Driving. And Provide Excellent Heat Resistance..
[Note] Please Measure The Exhaust Port To Ensure It Is Suitable. Do Not Use A Towing Cable To Remove The Cleaning Plug..
[Applicable]This Conical Design Exhaust Flushing Plug Comes In Two Sizes To Choose From: 0.6 "-1.5" And 1.1 "-1.8", Suitable For Most Two-Stroke Motorcycles And Bicycles. Please Measure Your Exhaust Port Before Purchasing To Ensure It Is Suitable..
[2 Streamers] The Muffler Exhaust Cleaning Plug Is Equipped With Streamer To Remind You To Remove The Dirty Bicycle Muffler Exhaust Cleaning Plug Before Departure. It Is Your Thoughtful Helper..
Features
- [High Quality Material] The exhaust tailpipe plug is made of new rubber, which has no odor, better toughness, high temperature resistance, high-quality durability, and can be used for a long time.
- [2 Streamers] The muffler exhaust cleaning plug is equipped with streamer to remind you to remove the dirty bicycle muffler exhaust cleaning plug before departure. It is your thoughtful helper.
- [Function] The rubber structure ensures a tight fit and effectively seals the exhaust pipe, ensuring smooth and uninterrupted driving. And provide excellent heat resistance.
- [Applicable]This conical design exhaust flushing plug comes in two sizes to choose from: 0.6 -1.5 and 1.1 -1.8, suitable for most two-stroke motorcycles and bicycles. Please measure your exhaust port before purchasing to ensure it is suitable.
- [Note] Please measure the exhaust port to ensure it is suitable. Do not use a towing cable to remove the cleaning plug.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #4
ESEWALAS Heavy Duty Trailer Hitch Lock,Hitch Receiver Pin Lock with 5/8" Pin for Class III IV 2" and 2-1/2" Receiver,Tow Hitch Lock for Hitch Bike Rack Tray Ball Tow Rope,Hitch Receiver Lock
Asin: B0C3H6X6NH | Model: 403TCS001 | PartNumber: 403TCS001
[Specification] The Heavy-Duty Trailer Hitch Lock Uses A 5/8 "Pin With An Effective Length Of 3-1/2", Which Is Very Suitable For Class Iii/Iv 2 ", 2-1/2" Hitch Receiver Pipes..
[Widely Used] The Trailer Hitch Lock Is Compatible With The Hitch Frame, Cargo Hitch Tray, Bicycle Frame, Hitch Ball, And Towing Rope, Making It Very Suitable For 2 "And 2-1/2" Receivers On Trailer Trucks, Rv Cars, And Ships..
[Easy To Operate Design] The Trailer Receiver Lock Adopts A Plum Blossom Keyhole Design, Equipped With Two Tubular Keys, Each Lock Cylinder Is Unique, And The Hook Lock Adopts A Push Lock Design. When You Hear A "Click" Sound, You Only Need To Pull The Lock Head To Ensure Its Operation. When Unlocking, Turn The Key, And The Bolt Will Automatically Pop Out..
[High Quality Material] The Trailer Receiver Lock Is Made Of Black Electrophoretic Painted Carbon Steel, Ensuring Wear Resistance And Rust Resistance. It Is Sturdy And Not Easily Bent, And The Key Cover Is Made Of High-Quality Rubber, Perfectly Embedded In The Lock Cylinder, Away From Moisture, Dust, And Rust, Improving Its Service Life..
Features
- [Package Includes] The package includes 1 receiver hook lock and 2 matching keys.
- [High Quality Material] The trailer receiver lock is made of black electrophoretic painted carbon steel, ensuring wear resistance and rust resistance. It is sturdy and not easily bent, and the key cover is made of high-quality rubber, perfectly embedded in the lock cylinder, away from moisture, dust, and rust, improving its service life.
- [Specification] The heavy-duty trailer hitch lock uses a 5/8 pin with an effective length of 3-1/2, which is very suitable for Class III/IV 2 , 2-1/2 hitch receiver pipes.
- [Easy to Operate Design] The trailer receiver lock adopts a plum blossom keyhole design, equipped with two tubular keys, each lock cylinder is unique, and the hook lock adopts a push lock design. When you hear a click sound, you only need to pull the lock head to ensure its operation. When unlocking, turn the key, and the bolt will automatically pop out.
- [Widely Used] The trailer hitch lock is compatible with the hitch frame, cargo hitch tray, bicycle frame, hitch ball, and towing rope, making it very suitable for 2 and 2-1/2 receivers on trailer trucks, RV cars, and ships.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #5
Z Whip M12 1.5 To 3/8 NPT LS Extended Length Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5
Asin: B08SR5K6LY | Ean: 0810065200679 | UPC: 810065200679
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 3/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Extended Length Coolant Adapter for Temp Sensors that need 2 depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 3/8 NPT threads (3/8 NPT is approx. 11/16 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 3/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 2.75 x 1.00 x 1.00 Inches
See On Amazon #6
Z Whip Billet LS Cylinder Head Coolant System Steam Vent Port Crossover Air Blead Plug Plates Compatible With Chevy Camaro Corvette LS1 LS2 LS3 LSA LQ4 LQ9 5.3L 6.0L 6.2L LSX Proudly Made In The USA
Asin: B08MQKTGRP | Ean: 0810065200204 | UPC: 810065200204
Proudly Made In The Usa From Aerospace Grade Billet Aluminum.
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Used To Cap Off The Front Or Rear Coolant System Air Blead Off Passages In The Cylinder Heads.
Features
- Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy)
- Used to Cap Off the front or rear Coolant System Air Blead Off Passages in the Cylinder Heads
- Proudly made in the USA from Aerospace Grade Billet Aluminum
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.10 x 0.50 x 0.70 Inches
See On Amazon #7
Z Whip M12 1.5 LS Coolant Temperature Sensor Plug Cylinder Head Temp Water Aluminum Hex Plug Metric Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR9XLXN | Ean: 0810065200716 | UPC: 810065200716
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Plug To Plug The Temp Sensor M12x1.5 Threaded Hole In The Cylinder Head.
Features
- Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy)
- Billet Aluminum Coolant Temperature Sensor Plug to Plug the Temp Sensor M12x1.5 Threaded Hole in The Cylinder Head
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #8
2PCS 2" Exhaust Gasket,Standard 2-Bolt Car Exhaust Flange Gasket Replacement OEM#120-06310-0002,Car Accessories Exhaust Manifold Gasket Made of High Temp Gasket Material (2 inch)
Asin: B0CTKFMMBL | Model: 2" Exhaust Gasket | PartNumber: 2" Exhaust Gasket
⭐ High Temp Resistant Material: As One Of The Main Heated Accessories Of Automotive Engines, The Exhaust Manifold Gasket Has A High Working Heat Load, High Vibration Intensity!.
⭐ Practical Car Accessories: We Insist On Providing The Best Car Accessories And Services For Our 40 Million Customers Worldwide. Each Of Our Gasket Is Carefully Tested And Inspected Before Delivery..
⭐ Easy To Install: The Packaging Contains 2X Muffler Gasket To Ensure Seamless Connection Between The Automotive Exhaust Manifold And Cylinder Head Flange. The Installation Of The Header Gasket Is Very Simple, And It Can Be Firmly Fixed In The Pipe Using Only Bolt Components..
⭐ Tightly Seal: If Your Car Exhaust Pipe Gasket Has Started To Age Or Become Damaged, It's Time To Replace It With A Premium Parts! Our Gasket Material Can Extend The Service Life Of The Engine Cylinder Head..
Features
- Buyer's Guide: Car exhaust gasket OEM#120-06310-0002. Its size is 120x80mm/4.72x3.16inch, thickness is 2mm/0.08inch, and inner diameter is 51mm/2inch. The flange gasket comes with 2 bolt holes spaced 69-105mm/2.69-4.15inch apart. It is suitable for bolt hardware smaller than 12mm or 1/2 inch.
- Tightly Seal: If your car exhaust pipe gasket has started to age or become damaged, it's time to replace it with a premium parts! Our gasket material can extend the service life of the engine cylinder head.
- High Temp Resistant Material: As one of the main heated accessories of automotive engines, the exhaust manifold gasket has a high working heat load, high vibration intensity!
- Easy to Install: The packaging contains 2x muffler gasket to ensure seamless connection between the automotive exhaust manifold and cylinder head flange. The installation of the header gasket is very simple, and it can be firmly fixed in the pipe using only bolt components.
- Practical Car Accessories: We insist on providing the best car accessories and services for our 40 million customers worldwide. Each of our gasket is carefully tested and inspected before delivery.
- See more on Amazon...
Brand: Stacool | Manufacturer: Stacool
Dimensions: 0.08 x 5.67 x 3.46 inches | Weight: 0.06 Pounds
Warranty: Warranty Within 3 Months
See On Amazon #9
RACOONA Radiator Pressure Tester Kit,Coolant Pressure Tester Radiator Pressure Leakage Tester Tool,Car Accessories Automotive Cooling System Water Tank Leak Test Detector Set for Car Motorcycle Truck
Asin: B0CN96R5YM | Model: 1174SRQYLCSY001 | PartNumber: 1174SRQYLCSY001
[Easy To Use] Remove The Original Radiator Cap, Select An Available Radiator Cap From The Test Kit, And Install It On The Radiator Opening. Operate The Hand Pump Until The Pressure Reaches 10-15Psi (Avoid Reaching 35Psi). Check The Instrument Reading. If The Reading Automatically Decreases, It Indicates That The Radiator May Be Leaking. Please Check The Radiator System And Repair It If Necessary. Normally, Testing For Leaks Takes About 10 Minutes And The Operation Is Very Simple And Fast..
[Widely Applicable] The Cooling System Pressure Test Kit Is Suitable For Cars, Trucks, Motorcycles, Atvs, Air Freight, Etc..
[Easy To Store And Carry] Radiator Test Kit Pressure Coolant Pressure Tester Vacuum Cooling System Kit Uses A Thick Blow Molding Toolbox To Keep All Tools In Place, Avoiding Damage Even Under Bumpy Conditions, Clean And Stable. It Also Facilitates Transportation, Storage, And Rapid Identification..
[Function] The Radiator Pressure Tester Helps To Detect Internal And External Leaks. It Is Very Suitable For Detecting Cylinder Head Gasket Faults On Which Side Or Cylinder Of The Cylinder Block Is Leaking. The Manual Pump Leak Detection Tool Pressurizes The Reservoir And Observes Whether The Pointer Decreases Over Time To Confirm System Leakage..
Features
- [High Quality Materials]The radiator pressure tester is made of high-quality aluminum alloy, rubber, and nylon, which has better sealing performance, higher strength, and good toughness, providing higher stability to extend service life, and has better vacuum effect.
- [Function] The radiator pressure tester helps to detect internal and external leaks. It is very suitable for detecting cylinder head gasket faults on which side or cylinder of the cylinder block is leaking. The manual pump leak detection tool pressurizes the reservoir and observes whether the pointer decreases over time to confirm system leakage.
- [Easy to Use] Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator opening. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the instrument reading. If the reading automatically decreases, it indicates that the radiator may be leaking. Please check the radiator system and repair it if necessary. Normally, testing for leaks takes about 10 minutes and the operation is very simple and fast.
- [Easy to Store and Carry] Radiator test kit Pressure coolant pressure tester Vacuum cooling system kit uses a thick blow molding toolbox to keep all tools in place, avoiding damage even under bumpy conditions, clean and stable. It also facilitates transportation, storage, and rapid identification.
- [Widely Applicable] The cooling system pressure test kit is suitable for cars, trucks, motorcycles, ATVs, air freight, etc.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
Warranty: no
See On Amazon #10
LS Engine Block Oil & Coolant Galley Plug & Cylinder head Dowel Pin Kit Expansion Freeze Barbell Compatible with all GM Chevy LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 4.8L 5.3L 6.0L 6.2L Vortec
Asin: B091D5TDZP | Ean: 0810065201089 | UPC: 810065201089
Lsx Blocks Require Additional Plugs..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve..
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Compatible With All Chevrolet Gm Ls Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) Ls1, Ls2, Ls3, Ls6, Ls7, Ls9, Gm 4.8L 5.3L 6.0L 6.2L. Also Fits Lsx Lm7 Lr4 Lq4 Lq9 L33 Lh6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
Features
- Comes with 4ea Cylinder Head Dowel Pins, 1ea Oil Galley Barbell, 1ea Threaded Coolant Passage Plug, 3ea Threaded Oil Galley Plugs, and 1ea Press in Freeze Plug. Contains all Required Plugs for Completing an Engine Rebuild.
- Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines.
- LSX Blocks Require Additional Plugs.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
See On Amazon #11
Z Whip M12 1.5 To 1/8 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR9RYGN | Ean: 0810065200693 | UPC: 810065200693
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 1/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Coolant Adapter for Temp Sensors that need 1.12 or less depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 1/8 NPT threads (1/8 NPT is approx. 13/32 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 1/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.75 x 0.75 x 0.75 Inches
See On Amazon #12
Zlirfy Multi-Use Transfer Pump,Siphon Pump,Car Accessories Siphon Pump for Gasoline,Automotive Gas Siphon Gasoline Transfer Pump,Fluid Transfer Pump,Siphon Fuel Transfer Pump Kit
Asin: B0CD7CJF3G | Model: 771SDCYGTJ001 | PartNumber: 771SDCYGTJ001
[Design] With A 3In1 Function, It Can Be Used For Conveying, Emptying, And Compressing Liquids. The Gas Siphon Manual Pump Has A Smooth Operating Handle And Two Long Red Hoses That Can Be Extended To Any Location. The Extractor Dipstick Tube Can Suck Oil From Any Vehicle..
[Multipurpose]The Siphon Transfer Pump Kit Can Be Used For Oil Change,Overfilled Fuel Tanks,Off-Season Storage, Refueling Empty Fuel Tanks From Gasoline Tanks,Discharging And Transferring Gasoline, Diesel, And Natural Gas From Cars, Trucks,Tractors, Snow Blowers, Boats, Lawnmowers, And Outdoor Power Equipment.When Brewing Beer Or Wine, Sediment Should Be Separated, And A Pressure Adapter Should Be Used To Supply Tires Inflate The Balloon..
[Easy To Use] This Oil Pump Is Designed With A User-Friendly Design And Easy To Operate, Allowing For Cleaning And Disassembly Without The Use Of Specialized Tools..
[Fast Transfer] The Efficient Liquid Transfer Pump Has A Displacement Of Up To 3 Gallons/12L Per Minute, Providing Perfect Pressure And Fast Siphon Transfer..
Features
- [High Quality]This safety siphon pump is made of durable materials, ensuring long-lasting and reliable performance. It is durable and can be used normally in various environments.
- [Fast Transfer] The efficient liquid transfer pump has a displacement of up to 3 gallons/12L per minute, providing perfect pressure and fast siphon transfer.
- [Design] With a 3in1 function, it can be used for conveying, emptying, and compressing liquids. The gas siphon manual pump has a smooth operating handle and two long red hoses that can be extended to any location. The extractor dipstick tube can suck oil from any vehicle.
- [Easy to Use] This oil pump is designed with a user-friendly design and easy to operate, allowing for cleaning and disassembly without the use of specialized tools.
- [Multipurpose]The siphon transfer pump kit can be used for oil change,overfilled fuel tanks,off-season storage, refueling empty fuel tanks from gasoline tanks,discharging and transferring gasoline, diesel, and natural gas from cars, trucks,tractors, snow blowers, boats, lawnmowers, and outdoor power equipment.When brewing beer or wine, sediment should be separated, and a pressure adapter should be used to supply tires Inflate the balloon.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #13
Z Whip M12 1.5 To 3/8 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR7XDDN | Ean: 0810065200686 | UPC: 810065200686
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 3/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Standard Length Coolant Adapter for Temp Sensors that only need 1 depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 3/8 NPT threads (3/8 NPT is approx. 11/16 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 3/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.75 x 1.00 x 1.00 Inches
See On Amazon #14
Z Whip M12 1.5 To 1/2 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR87BP7 | Ean: 0810065200709 | UPC: 810065200709
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 1/2” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Coolant Adapter for Temp Sensors that need 1.75 or less depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 1/2 NPT threads (1/2 NPT is approx. 27/32 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 1/2 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 2.50 x 1.00 x 1.00 Inches
See On Amazon #15
AOCISKA Oil Catch Can with Drain Valve,2 Port Air Oil Separator Kit Catch Can Kit,Universal Oil Catch Tank Kit,Fit for Most Cars
Asin: B0BYCHXJPK | Model: 198JYG001 | PartNumber: 198JYG001
[2 Ports] This Gas-Oil Separator Has Two Ports And One Outlet For Installation On Pcv/Ccv System..
[Widely Applicable] The Body Of This Two-Hole Oil Pot Is Very Small, Which Can Save Engine Speed. It Can Be Used In Many Cars. Just Make Sure There Is Enough Space In The Engine For Installation..
[Function] The Compact Oil Collecting Tank Is Designed To Separate Oil Particles From Pcv/Ccv Air, Prevent Misfire Caused By Carbon Deposition, Keep The Engine Clean And Extend The Engine Life..
[High Quality] The Oil Collecting Tank Is Made Of High-Quality Aluminum Alloy, Which Is Corrosion Resistant, Durable And Can Be Used For A Long Time..
Features
- [Package Includes] The package contains 1 oil pot,2 connectors,2 screws and 2 washers,1 nut, and 1 drain valve.
- [High Quality] The oil collecting tank is made of high-quality aluminum alloy, which is corrosion resistant, durable and can be used for a long time.
- [2 Ports] This gas-oil separator has two ports and one outlet for installation on PCV/CCV system.
- [Function] The compact oil collecting tank is designed to separate oil particles from PCV/CCV air, prevent misfire caused by carbon deposition, keep the engine clean and extend the engine life.
- [Widely Applicable] The body of this two-hole oil pot is very small, which can save engine speed. It can be used in many cars. Just make sure there is enough space in the engine for installation.
- See more on Amazon...
Brand: AOCISKA | Manufacturer: AOCISKA
Warranty: no
See On Amazon #16
RACOONA 10 Sets Engine Splash Shield Screw Kit,Car Accessories T30 Engine Splash Shield Guard Undertray Cover Bolt Kit with Screw Seat and Gasket,Use for Undertray Engine Fender Liner Deflector Grille
Asin: B0CJR5LGFC | Model: 1004FJZLS002 | PartNumber: 1004FJZLS002
[Easy To Use] Engine Mudguard Chassis Cover Screw Push-In Installation, Quick Tightening, And Easy To Use..
[Other Names] Plum Head Screws Other Names: Fender Lining Bolts, Splash Plate Screws, Outer Bracket Screws. Other Names For Underbody Protective Nuts: Front Deflector Fixing Nut, Side Shield Nut, Bottom Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Fixing Nut. Other Names For U-Shaped Nuts Under The Cover: Reservoir Nut, Side Reinforcement Nut, Lower Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Panel Grille Nut..
[Widely Used] These Push Clips Are Widely Used For Replacing Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Hood And Splash Shield Retainers..
[Durable Material] The Engine Mudguard Screws Are Made Of High-Quality Nylon, Which Is Wear-Resistant And Durable, Not Easy To Break During Use, Anti-Corrosion And Rust Proof, And Have A Long Service Life..
Features
- [Including Packaging] The packaging includes 10 sets of T30 engine splash proof screws, in sufficient quantity to meet your daily needs.
- [Durable Material] The engine mudguard screws are made of high-quality nylon, which is wear-resistant and durable, not easy to break during use, anti-corrosion and rust proof, and have a long service life.
- [Easy to Use] Engine mudguard chassis cover screw push-in installation, quick tightening, and easy to use.
- [Widely Used] These push clips are widely used for replacing trim panel clips, door trim clips, door panel clips, bumper clips, fender clips, engine hood and splash shield retainers.
- [Other Names] Plum head screws Other names: fender lining bolts, splash plate screws, outer bracket screws. Other names for underbody protective nuts: front deflector fixing nut, side shield nut, bottom cover nut, rear deflector nut, deflector nut, lower shield fixing nut. Other names for U-shaped nuts under the cover: reservoir nut, side reinforcement nut, lower cover nut, master cylinder nut, side support nut, cowl panel grille nut.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #17
4pcs Cylinder Head, Heavy Duty CNC Cylinder Head Dowels Pin Fits for LS LS1 LS2 LS6 5.3 6.0 5.7 LQ9 LQ4
Asin: B0BG314ZDY
Stable Performance: Professional Manufacturing, Excellent Sensitivity And High Reliability. The Cylinder Head Has Stable Performance And Is A Good Accessory..
Professional Design: Professional And Practical Design, Beautiful Appearance.Exquisite And Applicable, High Hardness, Strong And Durable..
Easy Installation: Without Many Complex And Difficult Tool And Steps, You Can Easily Install A New Cylinder Head. After Installing, Your Machine Will Have A Better Performance Compared With The Old One..
Strong Performance:Professional Manufacturing, High Accuracy, Good Reliability.Conform To Strict Quality Control Standards, Dependable To Use.Original Standard, Direct Replacement For The Old Or Broken One..
Features
- High Quality: Made of high quality CNC materials, high strength, high toughness, and corrosion resistance, also very durable with high temperature. These features decides the top performance of our cylinder head.
- Strong Performance:Professional manufacturing, high accuracy, good reliability.Conform to strict quality control standards, dependable to use.Original standard, direct replacement for the old or broken one.
- Stable Performance: Professional manufacturing, excellent sensitivity and high reliability. The cylinder head has stable performance and is a good accessory.
- Easy Installation: Without many complex and difficult tool and steps, you can easily install a new cylinder head. After installing, your machine will have a better performance compared with the old one.
- Professional Design: Professional and practical design, beautiful appearance.Exquisite and applicable, high hardness, strong and durable.
- See more on Amazon...
Brand: Yuecoom | Manufacturer: Yuecoom
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.07 Pounds
See On Amazon
Looking For Something Else?
Search