DOBSTFY 3D Printing Build Surface,with Premium Adhesive 3D Printer Heat Bed Platform Sticker Sheet,for Ender 3/Ender 3 Pro/Ender 3 V2 Neo/Ender 3 V3 KE/Ender 3 V3 SE/4Pack 8.7x8.7inch(220mmx220mm)
Asin: B08SQ95V9Q | Model: 4PK 220 | PartNumber: 4PK 220
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Install And Remove】Thick 1Mm Building Plates Will Not Warp Or Bend Under Heat. It Is Used On Top Of Your Heated Print Bed And Provides Excellent Results. Simply Remove The 3M Adhesive Paper On Back Side Then Stick It On Your Heat Bed. Or Fix It Just With Clip Around The Edges. Print Directly On To The Building Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
【Satisfaction Guaranteed】We're So Confident That You'll Love These Premium Print Surfaces, That We Offer A 90 Day Money Back Guarantee!.
【Fully Compatibly】 This 3D Printer Heatbed Platform Sheet Allows For Multiple Uses With Either The Same Or Different Filament Material. Compatible With Abs, Pla, Hips, Pet+, Brick, Wood, And Flexible (Tpe) Filaments. Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results..
【High Quality Material】High Strength And Heat Resistance (Up To 240°C) Allows The 3D Printer Surface To Perform Consistently In High Temperature Environments. The Durability Is Similar Pei Sheet But The Price Is Much Affordable Than Pei. This Hot Bed Sheet Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. And This 3D Build Plate Is Also Inherently Flame Resistant And Low In Smoke Production..
Features
- PACK of 4 The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2, MK2A, MK3, Anet A8, Anet A6 with large build areas. also fits Anet A8, Cocoon 3D Printer Touch, Wanhao Duplicator 6 and Duplicator i3 and i3 Plus, TronXY X2, TronXY P802M, Ultimaker 1, MonoPrice Maker Select Plus and Ultimate and V2, Robo R2. And you can also cut to any size as 220x210mm, 6.5"x6.5" and more.u want
- High Quality Material High strength and heat resistance (up to 240 C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
- Easy to Install and Remove Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
- Fully Compatibly This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
- SATISFACTION GUARANTEED We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!
- See more on Amazon...
Brand: DOBSTFY | Manufacturer: DOBSTFY
See On Amazon Similar To DOBSTFY 3D Printing Build Surfacewith
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 inches | Weight: 0.55 pounds
See On Amazon #2
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 inches
See On Amazon #3
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 Inches
See On Amazon #4
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235X235MM
Asin: B084YSZFXL | Model: MBE3 | PartNumber: MBE3 | Ean: 8414858708049
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints. Please Feel Free To Contact Us If You Have Any Problem, We Will Try Our Best To Help You..
Universal: With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Tpu, Nylon Etc, Not For Pla +, Not Recommended For Printing Abs Filaments..
Excellent Performance: This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
Features
- Super Convenient: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- Excellent Performance: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Easy to Install: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- Universal: With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon etc, not for PLA +, not recommended for printing ABS filaments.
- Note: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #5
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Ender | Manufacturer: Creality 3D
See On Amazon #6
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #7
Creality Ender 3 S1 Pro Build Plate, Original PEI Print Platform Kit Magnetic Flexible Spring Steel Texture Surface for Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/3 Neo/3V2 Neo K1/K1C 235x235mm
Asin: B0BBMKLG86 | Model: 3d-s1pro-pei | PartNumber: 3d-s1pro-pei
【Great Adhesion】Print Molds Onto Pei Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy Take Models】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke K1/K1c And Other Same-Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The design of the positioning hole makes the PEI Sheet installation more convenient.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE K1/K1C and other same-sized beds.
- Great Adhesion Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Models Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Creality Ender 3 Build Plate Kit Dual-Sided Printing Platform Board Glossy PET + Matte PEI Plate Build Surface for Ender 3 V3 SE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1 235x235mm
Asin: B0CQQZZSSQ
【Compatible 3D Printers】The Double-Sided Glossy Pet + Matte Pei Print Bed Suitable For 3D Printers With 235×235Mm Platform Size, Such As Suitable For Creality Ender 3 V3 Se/Ender 3 V3 Ke/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/Cr 10 Se, Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Flatness & Easy Demolding】High-Flatness Spring Steel Sheet With Excellent Elasticity, Remains Undistorted After Repeated Bending, Wear-Resistant And Durable, Facilitating Demolding..
【Quick Installation & Precise Positioning】Dual-Sided Printing Platform Board Kit – Glossy Pet + Matte Pei, With The Unique Dual-Handle + Dual-Locating Hole Design For Accurate Installation..
【High Adhesion & Stable Molding】Ender 3 V3 Se Pei Build Plate Thin Spring Steel Sheet With Surface Adhesion To High-Adhesion Materials, To Reduce Inertia During Platform Movement For Smoother 3D Printer Operation..
【Compatible Filaments】Ender 3 Build Plate Pet Sticker Build Plate Surface Can Withstand Temperatures Up To Approximately 80°C; Recommended For Printing Pla, Petg, Tpu. Matte Pei Surface Suitable For Printing Nearly All Mainstream Filaments: Pla, Petg, Abs, Tpu, Asa, Pet, Pa, Pc, Etc. Dual-Sided Platform Combining The Strengths Of Both, Allowing For Seamless Switching..
Features
- Upgraded Double Sided Printing Platform Board Double-sided PET+PEI printing platform meets diverse printing needs. one side is PET carbon fiber texture design, unique and innovative pattern, excellent texture effect on model bottom surface. The other side is matte PEI presenting the frosted sticker surface a distinctive frosted touch, high-adhesion, to prevent model warping.
- Compatible Filaments Ender 3 build plate PET sticker build plate surface can withstand temperatures up to approximately 80 C; recommended for printing PLA, PETG, TPU. Matte PEI surface suitable for printing nearly all mainstream filaments: PLA, PETG, ABS, TPU, ASA, PET, PA, PC, etc. Dual-sided platform combining the strengths of both, allowing for seamless switching.
- Compatible 3D Printers The double-sided glossy PET + matte PEI print bed suitable for 3D printers with 235 235mm platform size, such as suitable for Creality Ender 3 V3 SE/Ender 3 V3 KE/Ender 3/Ender 3Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/K1/CR 10 SE, Please confirm your 3D printer platform size before ordering.
- High Adhesion & Stable Molding Ender 3 V3 SE PEI build plate thin spring steel sheet with surface adhesion to high-adhesion materials, to reduce inertia during platform movement for smoother 3D printer operation.
- High Flatness & Easy Demolding High-flatness spring steel sheet with excellent elasticity, remains undistorted after repeated bending, wear-resistant and durable, facilitating demolding.
- Quick installation & Precise positioning Dual-Sided Printing Platform Board Kit Glossy PET + Matte PEI, with the Unique dual-handle + dual-locating hole design for accurate installation.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.31 x 10.43 x 9.84 Inches | Weight: 1.20 Pounds
See On Amazon #9
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 Pounds
See On Amazon #10
Official Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S/Ender 3 Max/Ender 3 Max Neo/SV06 Plus/SV04 IDEX/Longer LK5 Pro 3D Printer 310X310MM
Asin: B07JFH3MFK | Model: CR-10-Magnetic | PartNumber: CR-10-Magnetic | Ean: 0667797511692 | UPC: 667797511692
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands.
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.93 Pounds
See On Amazon #11
Creality Ender 3 Build Plate 235x235mm Double-Sided Magnetic Bed Plate Smooth/Textured Flexible Removable Printing Platform for Ender 3 V2/Ender 3 Pro/Ender 3 S1/3 S1 Pro/Ender 5/5S/5 Pro
Asin: B0C1GS8J8G | Ean: 0198549004419 | UPC: 198549004419
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Ender 3 Magnetic Bed Plate Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Original Quality】- You Will Get 100% Original Creality 235X235mm Double Side Pei Sheet X1. We Provide Fast And Friendly Customer Service To Solve Your Problem Within 24 Hours. If You Have Any Questions, Please Do Not Hesitate To Contact Us..
【Wide Application】- This Ender 3 Build Plate Is Compatible With Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To Be Compatible With Ender-3 S1/Ender-3 S1 Pro, Please Remove The Two Positioning Screws On The Hotbed First. The Double Side Pei Printing Surface Is Compatible With Pla, Petg, Peek, Abs And Any Other Filaments..
【Thin And Light】- The Thickness Of This Ender 3 Bed Plate Is Only 1.2Mm. Thin Thickness Can Reduce The Inertia Of The Platform's Movement And Prevent It From Shaking During Printing. This Helps 3D Printers Run Smoothly And Improve Printing Quality..
Features
- 2 in 1 - One side is a smooth PEI surface. The PEI material ensures that your 3D prints adhere well to the bed and do not warp or move during printing. The smooth PEI surface makes sure that your model has a flat bottom. The other side is a textured sticker. This results in better adhesion and less warping, which leads to better prints overall.
- Thin And Light - The thickness of this Ender 3 bed plate is only 1.2mm. Thin thickness can reduce the inertia of the platform's movement and prevent it from shaking during printing. This helps 3D printers run smoothly and improve printing quality.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The Ender 3 magnetic bed plate has excellent elasticity and it is not deformed after repeated bending.
- Wide Application - This Ender 3 build plate is compatible with Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-5, Ender-5S, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro. Note: To be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first. The double side PEI printing surface is compatible with PLA, PETG, PEEK, ABS and any other filaments.
- Original Quality - You will get 100% Original Creality 235x235mm double side PEI sheet x1. We provide fast and friendly customer service to solve your problem within 24 hours. If you have any questions, please do not hesitate to contact us.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #12
OVERTURE 3D Build Surface 200mm x 200mm (7.88 x 7.88 ) Upgraded 3D Printer Build Plate Sheet Heat Bed Platform Sticker with Laminated Transfer Adhesive, 10mm Grid, Black (5-Pack)
Asin: B07RSWXF4Q | Model: VAS200 | PartNumber: VAS200 | Ean: 0850006233373 | UPC: 850006233373
【Durable And Reusable】-- Scratch Resistant , Special Inorganic Finishing With Hardness Of 8 Mohs, Not Easy To Break Or Wear Out; Easy To Clean, It Is Acceptable To Touch Acids And Alcohols, You Can Wipe Down With Isopropyl Alcohol Between Prints For Best Results, So That You Can Reuse It For Multiple Prints..
【Service And Guarantee】-- Our Overture Build Platform Surface Is Designed To Achieve Very Good First Layer Adhesion And Increase The Chances Of Getting Beautiful Prints. In Order To Provide Our Customers With Better Shopping Experience, We Offer 90-Day Money Back. Feel Free To Contact Us And Get Full Refund Or New One If There Is Anything Unsatisfying..
【200*200 With 10Mm Rigid】 -- This Ultrabase Is Compatible With Small Size Desk 3D Fdm Printer. Works With Abs, Pla, Petg, Pett, Pva, Hips, Asa, Flexibles, Nylon And More. Easy To Remove The Prints By Hand Or With The Help Of Some Tools Such As Peeler Or Scrapper. 10 Mm Rigid Allows You To Cut It Into Your Desired Size..
【Good Flatness And Bubble Free】-- This Ultrabase Is Glass-Based, Bubble-Free When Being Installed, Which Provides Fast And Uniform Heating. Both The Laminated Adhesive And The Platform Sheet Are Heat Resistant, Which Not Only Provides A Strong Bond, But Also Are Not Like To Warp When Being Heated, Contributing To A Stable And Consistent Performance In Guarantee Beautiful Prints.
Features
- Upgraded 3D Build Surface -- We upgrade the 3M 300LSE Adhesive with new laminated adhesive transfer tape, which guarantees excellent adhesion, but at the same time, enable you to remove it easily from the heated bed when need replacing, easy to install and use
- Good Flatness and Bubble Free -- this Ultrabase is glass-based, bubble-free when being installed, which provides fast and uniform heating. Both the laminated adhesive and the platform sheet are heat resistant, which not only provides a strong bond, but also are not like to warp when being heated, contributing to a stable and consistent performance in guarantee beautiful prints
- Durable and Reusable -- scratch resistant , special Inorganic finishing with hardness of 8 Mohs, not easy to break or wear out; easy to clean, It is acceptable to touch acids and alcohols, you can wipe down with isopropyl alcohol between prints for best results, so that you can reuse it for multiple prints.
- 200*200 with 10mm Rigid -- This Ultrabase is compatible with small size desk 3D FDM printer. Works with ABS, PLA, PETG, PETT, PVA, HIPS, ASA, Flexibles, Nylon and more. Easy to remove the prints by hand or with the help of some tools such as peeler or scrapper. 10 mm rigid allows you to cut it into your desired size.
- Service and Guarantee -- Our Overture Build Platform surface is designed to achieve very good first layer adhesion and increase the chances of getting beautiful prints. In order to provide our customers with better shopping experience, we offer 90-day money back. Feel free to contact us and get full refund or new one if there is anything unsatisfying.
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
See On Amazon #13
HICTOP Double Sided PEI Sheet Smooth/Textured PEI bed and Magnetic build plate with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2 Ender-3 3D printers
Asin: B08PFJKW5J | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 235*235Mm（9.25*9.25Inch）, It Is Applicable With Creality 3D Printer Such As Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，Cr-20, Cr-20 Pro And Similarly Sized Machines..
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Hictop Textured Pei And The Smooth Pei Sheet Are Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 120℃ On The Bed..
Features
- 1 The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 235*235mm 9.25*9.25inch , it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2 Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #14
Creality Original Heat Bed Platform Sticker Sheet,Build Surface Plate 235x235 for Creality Ender 3 S1,Ender 3 pro, Ender 3 v2/Ender 3 V2 Neo (Pack of 2)
Asin: B07FCBCS9K | Model: Ender-3-Mat | PartNumber: Ender-3-Mat | Ean: 0667797511500 | UPC: 667797511500
Compatible With Abs, Pla, Hips And Other Filament.
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Material.
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films.
Build Sheet Adheres To A Print Bed To Help The Filament Stick During Printing, While Also Enabling Clean Removal Of The Printed Part Afterward.
Features
- Size:235mm x 235mm,
- Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward
- Compatible with ABS, PLA, HIPS and other filament
- Single sheet design installs more quickly and with fewer bubbles than tape or films
- Durable construction allows for multiple uses with either the same or different filament material
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #15
Creality Ender 3 V3 SE Dual-Sided Printing Platform Board Kit (Glossy PET+Coated PEI) Build Plate 235x235mm for Ender-3 Ender 3 S1 Pro/Ender 5 S1 Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 KE/CR-10 SE/K1
Asin: B0CR47LNMY | Ean: 0850063141000 | UPC: 850063141000
High Flatness,Easy Demolding: High-Flatness Spring Steel Sheet With Excellent Elasticity,Remains Undistorted After Repeated Bending,Facilitating Demolding.
Quick Installation, Precise Positioning: Unique Dual-Handle+Dual-Locating Hole Design For Accurate Installation.
Compatible Printe: Fit For Fdm Printers With A Platform Size Of 235×235Mm,Like Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/Cp-01/Cr-20/Cr20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/K1 And Other Same-Sized Beds..
Strong Magnetic Adhesion,Resistant To Displacement: Powerful Magnetic Stickers Are Used To Maintaiin High Magnetism Even At High Temperatures,To Ensure Printing Stability.
High Adhesion,Stable Molding: Thin Spring Steel Sheet With Surface Adhesion To High-Adhesion Materials,To Reduce Inertia During Platform Movement For Smoother 3D Printer Operation.
Features
- Dual-use functionality,a powerful combination: One printing platform meets diverse printing needs, PET carbon fiber texture design,unique and innovative pattern,excellent texture effect on model bottom surface, high-adhesion black matte PEI,to prevent model warping
- High adhesion,stable molding: Thin spring steel sheet with surface adhesion to high-adhesion materials,to reduce inertia during platform movement for smoother 3D printer operation
- High flatness,easy demolding: High-flatness spring steel sheet with excellent elasticity,remains undistorted after repeated bending,facilitating demolding
- Strong magnetic adhesion,resistant to displacement: Powerful magnetic stickers are used to maintaiin high magnetism even at high temperatures,to ensure printing stability
- Quick installation, precise positioning: Unique dual-handle+dual-locating hole design for accurate installation
- Compatible Printe: Fit for FDM printers with a platform size of 235 235mm,like Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro/CP-01/CR-20/CR20 Pro/Ender 3 S1 Pro/Ender 5/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/K1 and other same-sized beds.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #16
Raise3D Build Plate with Handle and Buildtak Printing Surface (Pro3 Series Only)
Asin: B0CDN7B9FK | Model: [S]3.01.1.024.034A01 | PartNumber: [S]3.01.1.024.034A01 | Ean: 6970240723905
Brand: 3D Printlife | Manufacturer: Raise3D
Dimensions: 3.54 x 5.12 x 11.42 Inches
See On Amazon #17
Ready 3D Printer Build Plate Adhesive - Excellent Hold and Easy Release - Versatile, Non-Toxic and Ready
Asin: B0CJ8H8ZCL | Model: R3D-4583 | PartNumber: R3D-4583 | Ean: 0799793600770 | UPC: 799793600770
Great For Pla, Abs, Petg, Asa, Tpu, Pla+, Ht-Pla, Pla-Pro, Cf-Pla, Wood-Pla, Cf-Abs, Abs+, Ht-Petg, Cf-Petg, Cf-Asa, Petg Pro.
No Harsh Solvents Included. Non-Toxic And Odorless Formula.
Easy To Apply With Long Lasting Sponge Applicator.
Goes On Clean And Dries Clear. No Flakey Mess On The The Build Plate.
One Application And Be Used For Multiple Prints.
Superior Build Plate Adhesion And Easy Release When The Build Plate Is Cooled Down.
Excellent For Use During Long Print Times And Parts That Have A Small Surface Area Contact With The Build.
Features
- Ready 3D is the go to 3D printer build plate adhesive when first layer perfection is you goal. Made in the USA with high quality materials to acheive superior consistency. Ready 3D is the most versatile on the market to prevent warping and easy release and clean up.
- Excellent for use during long print times and parts that have a small surface area contact with the build
- Great for PLA, ABS, PETG, ASA, TPU, PLA+, HT-PLA, PLA-Pro, CF-PLA, Wood-PLA, CF-ABS, ABS+, HT-PETG, CF-PETG, CF-ASA, PETG Pro
- Superior build plate adhesion and easy release when the build plate is cooled down
- Goes on clean and dries clear. No flakey mess on the the build plate
- One application and be used for multiple prints
- No harsh solvents included. Non-Toxic and odorless formula
- Easy to apply with long lasting sponge applicator
- See more on Amazon...
Brand: ACMAXPRO | Manufacturer: ACMAXPRO LLC
Dimensions: 6.00 x 1.38 x 1.38 Inches | Weight: 0.21 Pounds
See On Amazon #18
2-Pack Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed for Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer 235X235MM
Asin: B09V25RV96 | Model: rr-ct | PartNumber: rr-ct
Easy To Install: Magnetic Bed Comes With Upper Matte Magnetic Build Plate And Lower Magnetic Adhesive Build Plate. Post The Lower Adhesive Plate On Printing Platform, Make The Upper Magnetic One Match Well With It, Then You Can Start Print..
Please Note: If The Two Parts Of The Magnetic Bed Fail To Adsorb, Please Rotate It 90 Degrees And Try Again. Do Not Use Acetone To Wipe Off Thin Layers Left From Prints..
Customizable: 235Mm X 235Mm Size, The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models. Applicable Materials Like Pla, Abs, Tpu, Nylon Etc..
Easy To Use: This Magnetic Sheet Has Great Adhesion, Prints Can Be Sticked On The Surface Firmly. After Printing, Take Off The Upper Magnetic Build Plate From The Lower One, Bend The Flexible Plate Carefully, The Prints Can Be Removed Easily..
Features
- EXCELLENT PERFORMANCE: This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- EASY TO USE: This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.
- EASY TO INSTALL: Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.
- CUSTOMIZABLE: 235mm x 235mm size, The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models. Applicable materials like PLA, ABS, TPU, nylon etc.
- PLEASE NOTE: If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints.
- See more on Amazon...
Brand: Lutyr | Manufacturer: Creality
See On Amazon #19
Creality Original Ender 3 Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover, with 15pcs Nozzle, for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Pro, 235X235MM
Asin: B0CC5CVFXY
Soft Magnetic Sticker Of Strong Flexibility, Directly Remove The Model By Bending The Sticker, Easy To Be Installed And Removed..
Product Size: 235X235x1mm..
Simple Installation, Quick And Convenient, Tear The Gum, Flatten The Sticker Without Bubbles And Direct Adhesion, Down To Print After Simple Adjustment..
Package Include: 1Pcs Heated Bed Cover, 15Pcs Nozzles(5Pcs Mk Nozzles, 5Pcs Brass Nozzles, 5Pcs Mk8 Nozzles)..
Features
- Compatible Models: for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro, Ender 5, Ender 5 Pro 3d printer.
- Package include: 1pcs Heated Bed Cover, 15pcs nozzles(5pcs mk nozzles, 5pcs brass nozzles, 5pcs mk8 nozzles).
- Soft magnetic sticker of strong flexibility, directly remove the model by bending the sticker, easy to be installed and removed.
- Simple installation, quick and convenient, tear the gum, flatten the sticker without bubbles and direct adhesion, down to print after simple adjustment.
- Product size: 235X235X1MM.
- See more on Amazon...
Brand: SQWAN | Manufacturer: SQWAN
See On Amazon
Looking For Something Else?
Search