12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)
Asin: B08V8QC8Y1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, Home, School And Industry Welding Work; And The Wicks Adopt Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience For Your Daily Work.
Quality Material: The Desoldering Wicks Are Made Of Quality Copper Wires, And The Design Of Precise Weaving Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing The Work Efficiency.
Features
- Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
- Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
- Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
See On Amazon Similar To 12 Pieces Solder Wick Solder
#1
RepairBox Power Input Jack for Super NES
Asin: B07B93JHXV | Model: DSNESR-A01 | PartNumber: DSNESR-A01 | Ean: 0813048014300 | UPC: 813048014300
Soldering Required.
Works With The Snes Ac Adapter.
Features
- This item is only compatible with the original, first generation, US Super Nintendo Console
- Works with the SNES AC adapter
- Soldering required
- See more on Amazon...
First Available: 01/01/2013
Brand: RepairBox | Manufacturer: RepairBox
Weight: 0.03 Pounds
See On Amazon #2
TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
Asin: B093ZYF99G
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty ：If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
Dimensions: 0.39 x 118.11 x 0.08 inches | Weight: 0.01 pounds
See On Amazon #3
TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'
Asin: B09XGY9M5H | Model: SW-2515 | PartNumber: SW-2515
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty ：If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
See On Amazon #4
MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.6mm 50g)
Asin: B075WBDYZZ | Model: JF650 | PartNumber: JF650 | Ean: 0765470166716 | UPC: 765470166716
√ Flux Content 1.8%，Electrical Soldering Wire Dia Is 0.6Mm (0.0235Inch)，Gross Weight 50Gram (0.11Lbs),Good Size For Pocket.
√ Applications: Very Good Soldering Capability, Esp For Circuit Board, Diy, Home Improvement, Repairation Of Cable/Tv/Radio/Sterro/ Toys And Other Electrical Devices Etc. (Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Brith Defects Or Other Reproductive Harm. For More Information Go To The Offical Proposition 65 Warnings Website).
√ Low Melting Point: 361F/183C. Easy To Be Soldered, Flows Smoothly, Soldering Fast And Strong Soldering Point..
√ Parameters: Solder Wire Tin 63.
Features
- Tin Lead Solder Wire: High Quality Rosin Core Solder Wire
- Parameters: solder wire Tin 63
- Flux content 1.8% electrical soldering wire dia is 0.6mm (0.0235inch) gross weight 50gram (0.11lbs),good size for pocket
- Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point.
- Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website)
- See more on Amazon...
Brand: MAIYUM | Manufacturer: Shenzhen Joycefook Technology Co., Ltd
Dimensions: 2.17 x 2.17 x 1.18 inches | Weight: 0.12 pounds
See On Amazon #5
Lesnow Solder Wicks No-Clean Solder Wick 10ft Length 2 Pieces Desoldering Braided Wicks. Solder Removal Tool Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B0962XQ4HH | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905408 | UPC: 606727905408
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-FT
Weight: 0.50 ounces
See On Amazon #6
TOWOT Tin Lead Rosin Core Solder Wire for Electrical Soldering, Content 1.8% Solder Flux Sn60-Pb40 (1.0mm, 50g)
Asin: B0943RVQ5W | Model: SW1050 | PartNumber: SW1050
[Perfect Soldering Capability] -- This Wire Has A Low Melting Point, Flow Smoothly, Fast Soldering Speed And Strong Solder Joints..
[After-Sales Guarantee] -- In Order To Bring You A Better Shopping Experience, If You Have Any Questions, Please Feel Free To Contact Us. We Will Reply As Soon As Possible. Thank You!.
[Applications] -- The Features Of Solder Wire Can Help People Solder More Easier. Especially Suitable For Circuit Board, Tv, Radio And Other Home Appliances Repair, Diy, Home Decoration..
[Parameters Of Solder Wire] -- Diameter: 1.0Mm /Weight: 50 G.
Features
- [Alloy Parameters] -- Solder wire Tin 60%- Lead 40% (Sn60-Pb40) Solder flux Content:1.8%
- [Parameters of Solder Wire] -- Diameter: 1.0mm /Weight: 50 g
- [Perfect soldering capability] -- This wire has a low melting point, flow smoothly, fast soldering speed and strong solder joints.
- [Applications] -- The features of solder wire can help people solder more easier. Especially suitable for circuit board, TV, radio and other home appliances repair, DIY, home decoration.
- [After-sales guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will reply as soon as possible. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
Weight: 0.11 pounds
See On Amazon #7
Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B09B9DF96D | Model: XXX00 | PartNumber: XXX00 | Ean: 0632296853406 | UPC: 632296853406
3.Widely Used: No-Clean Solder Braid Is Suitable For Welding Work In Laboratories, Industries, Schools And Homes, It Is Suitable For All Kinds Of Electronics, Electrical Appliances, Precision Instruments And Meters. It Can Absorb Tin Quickly And A Large Amount Of Tin, And Is Dedicated To Remove Excess Solder..
5.Ingenuity Quality: 1 Piece Of No-Clean Solder Braided Wicks (0.078 Inch Wide, 9.84 Ft Length), Which Is Sufficient To Meet Your Work Requirements. If You Have Any Product Questions, You Can Contact Us At Any Time..
4.Easy To Use: Desoldering Braid Is Used To Absorb Excess Solder When Removing Tin, The Fine Woven Design Promotes Strong Capillary Action To Suck In Excess Solder. The Main Board Desoldering Spot Is Removed, And It Is Used With The Soldering Station..
2.Geometric Braid Design: The Desoldering Wick Adopts A Precise Geometric Braid Design, Which Ensures A Large Surface Tension And Tin Absorption Ability, And Reduces The Risk Of Thermal Damage To The Circuit Board..
Features
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
- See more on Amazon...
Brand: Herain | Manufacturer: Herain
Dimensions: 0.40 x 1.85 x 1.85 inches
See On Amazon #8
AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g
Asin: B074CFBQS7 | Ean: 0601263548508 | UPC: 601263548508
Relative Parameters:60% Tin And 40% Lead Are Apply For Electronic Assembly Perfectly. 1.8% Flux Is Good For Soldering, Diameter 0.8Mm Is Good Joint And Avoid Components Overheating.
Wide Application: The Rosin Core Solder Wire Is Designed For Electrical Repairs, Such As Radios, Tvs, Vcrs, Stereos, Wires, Motors, Circuit Board And Other Electronics Devices.
Easy To Carry: You Can Take The Solder Wire Anywhere In Your Pocket. And The Plastic Tube Protect Solder From Dirt And Moisture(Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To The Official Proposition 65 Warnings Website).
Easy To Use: Flows Well And Heats Evenly, The Melting Point Of Soldering Iron Wire Is 185°C - 190°C (365°F - 374°F).
Features
- High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron
- Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185 C - 190 C (365 F - 374 F)
- Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating
- Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website)
- Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices
- See more on Amazon...
Brand: AUSTOR | Manufacturer: AUSTOR
Dimensions: 0.06 x 3.54 x 3.54 inches | Weight: 0.26 pounds
See On Amazon #9
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 Inches
See On Amazon #10
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
Asin: B0195UVWJ8 | Model: SW02-10 | PartNumber: SW02-10 | Ean: 0768249099987 | UPC: 768249099987
100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 Pounds
See On Amazon #11
MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue
Asin: B008O9VLA2 | Model: 426 | PartNumber: 426 | Ean: 0779008426005 | UPC: 779008426005
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.04 x 0.04 x 0.01 inches | Weight: 0.02 pounds
See On Amazon #12
Solder Wire Rosin Core No Lead Electrical Solder Wire Thin 0.6mm 50g Fine Solder with Flux 2.5 PB Free Sn99 Ag0.3 Cu0.7 Flow 0.11lb Electronics Soldering DIY Repair Tiny Solder
Asin: B07XKHNN2Z
Wire Diameter Is Just 0.6Mm 0.024In, Ideal For Fine Soldering Work, Soldering The Tiny Part.
The Melting Point Temperature At 419F, Suitable For All Soldering Tools, Bright Soldering Pad.
Rohs Compliant Good For Electronics Soldering Task For Pcb, Wire, Smaller Ics, Tiny Resistor.
Alloy Materials Sn99 Ag0.3 Cu0.7, The Ag0.3 Is An Important Material Has Great Electricity Conductivity Which Is Great To Soldering The Amplifier Equipment And Others High End Product.
Features
- Rosin core with flux, well flow during electronics soldering, easy for use, good solder joint
- Alloy materials Sn99 Ag0.3 Cu0.7, the Ag0.3 is an important material has great electricity conductivity which is great to soldering the Amplifier equipment and others high end product
- Wire diameter is just 0.6mm 0.024in, ideal for fine soldering work, soldering the tiny part
- RoHS compliant good for electronics soldering task for PCB, wire, smaller ICs, Tiny resistor
- The melting point temperature at 419F, suitable for all soldering tools, bright soldering pad
- See more on Amazon...
Brand: E ENERSYSTEC | Manufacturer: Enersystec Electric Co.,Ltd
See On Amazon #13
Kester 83-7068-1402 SN96.5 / AG03 / CU.5 Lead Free Solder Pocket Pak, 0.031" Diameter, 0.43 oz.
Asin: B003NTLQ6M | Model: 83-7068-1402 | PartNumber: 83-7068-1402 | Ean: 0661799766166, 0768249176466 | UPC: 768249176466, 661799766166
Core Size: 66 (3.3% By Weight).
Contains: 0.43 Oz.
Alloy: 96.5% Tin / 3% Silver / .5% Copper.
Features
- Wire Diameter: .031"
- Alloy: 96.5% Tin / 3% Silver / .5% Copper
- Core Size: 66 (3.3% by weight)
- Contains: 0.43 oz
- See more on Amazon...
Brand: Kester | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 Pounds
See On Amazon #14
2 Pack Carbon Felt Welding Blanket Fireproof, 1800 F Heat Resistant Flame Retardant Protective Mat Insulation Pad for Soldering Welding Brazing Plumbing Supplies, 12" x 36" Tailorable
Asin: B0CC5C62RM
🔥[Premium Material] Our Felt Welding Blankets Are Made Of High-Quality Carbon Fiber, Which Is Super Heat Resistant, Making It Virtually Unburnable, While Being Resistant To Tearing. In Addition, They Are Soft And Non-Irritating To The Human Body..
🔥[Security Guardian] With Ideal Size And Quantity, Super Performance, Premium Material And Wide Applications, Our Carbon Felt Welding Blankets Really Protect Property And Personal Safety..
🔥[Wide Applications] You Can Cover The Equipment Or Ground In The Welding Area With These Soldering Blankets To Prevent Damage From Heat, Sparks And Slag. They Are Also Suitable As Protective Covers For Wires And Cables Or As Heat Insulation For Flue And Gas Ducts..
🔥[Super Performance] Our Fireproof Welding Blankets Have A Low Thermal Conductivity Of 0.13 W/(M-K) And Can Withstand Temperatures Up To 1800°F (982°C). The Excellent Cooling Efficiency Allows Them To Provide Maximum Thermal Protection For Most Of Welding Work Area..
Features
- [Extra-Long & Tailorable] The product includes 2 pieces of carbon felt welding blankets, each with a width of 12 inches and a length of up to 36 inches, allowing you to easily tailor them to any desired size or shape. This will bring more practicality and flexibility.
- [Super Performance] Our fireproof welding blankets have a low thermal conductivity of 0.13 W/(m-K) and can withstand temperatures up to 1800 F (982 C). The excellent cooling efficiency allows them to provide maximum thermal protection for most of welding work area.
- [Premium Material] Our felt welding blankets are made of high-quality carbon fiber, which is super heat resistant, making it virtually unburnable, while being resistant to tearing. In addition, they are soft and non-irritating to the human body.
- [Wide Applications] You can cover the equipment or ground in the welding area with these soldering blankets to prevent damage from heat, sparks and slag. They are also suitable as protective covers for wires and cables or as heat insulation for flue and gas ducts.
- [Security Guardian] With ideal size and quantity, super performance, premium material and wide applications, our carbon felt welding blankets really protect property and personal safety.
- See more on Amazon...
Brand: Biggun | Manufacturer: Biggun
See On Amazon #15
4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire (1.76 oz / 50 g) + Rosin Solder Flux Paste (0.35 oz / 10 g), no-clean soldering core (2.0mm, 29.5 inches)
Asin: B07XZHN4W6 | Model: 01 | PartNumber: 01 | Ean: 0783710641281 | UPC: 783710641281
Rosin - Weighs 0.35 Oz/10 G. Promote The Flow Of Solder, Improve The Efficiency Of Welding Process, Allow Solder To Form Solid, Less Residue, No Need To Clean, Lasting Mechanical And Electrical Connections..
Welded 4-In-1 Set Contains 4 Necessary Welding Products, Saving You Time To Purchase Multiple Times.Warning:This Product Contains Lead, Be Aware Of Cancer And Reproductive Harm - For More Information:Www.P65warnings.Ca.Gov.
No-Clean Desoldering Core - 2.0Mm Wide And 29.5 Inches Long, Made Of Pure Oxygen-Free Copper Wire, It Has Strong Ability To Absorb Tin. No Cleaning, Low Residue. Removes More Solder Than Traditional Wicks, Making It Easy To Correct Errors On Small Pcb Boards..
Solder Wire - Weight 1.76 Oz / 50 G. Good Fluidity, Uniform Heating, Uniform Solder Joints, Clean, Contribute To The Rapid Completion Of Welding..
Features
- Soldering Iron Tip Cleaner - the best Soldering iron Tip Cleaner and base, no water,does not reduce the tip temperature. Made of brass wire, it is cleaner than traditional sponges. Safe and clean to use.
- Solder wire - weight 1.76 oz / 50 g. Good fluidity, uniform heating, uniform solder joints, clean, contribute to the rapid completion of welding.
- Rosin - weighs 0.35 oz/10 g. Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
- No-clean desoldering core - 2.0mm wide and 29.5 inches long, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, low residue. Removes more solder than traditional wicks, making it easy to correct errors on small PCB boards.
- Welded 4-in-1 set contains 4 necessary welding products, saving you time to purchase multiple times.Warning:This product contains lead, be aware of cancer and reproductive harm - For more information:www.p65Warnings.ca.gov
- See more on Amazon...
Brand: YCD | Manufacturer: YCD
Weight: 0.11 pounds
See On Amazon #16
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
Asin: B098X43NQ6
Quality Material: These No Clean Soldering Wicks Are Made Of Quality Copper Wire And Adopt Precise Weaving Technology, Which Can Enhance Tension On The Surface To Absorb Excess Solder; The Liquid Solder Pen Is Made Of Reliable Materials, No Leaking And Safe For Protecting The Flux, Preventing You From Touching The Organic Solvents.
Wide Applications: These Soldering Pens And Braided Solder Wicks Can Be Applied For Laboratory, Computer, Home Repairs And Correcting Small Pcb Board Errors And Through Hole Solder Joints, Electronics Welding, Etc., Bringing A Lot Of Convenience To Your Work And Improving Efficiency.
Practical Tools: 10-Ml Solder Pen With Soft Brush Tip Can Release The Liquid Flow Moderately, Which Can Clean The Components Without Harming The Pcb Board Copper Foil Or Ic Pin; The Solder Remover Wick Features Good Thermal Conductivity And Absorption, Useful To Reduce The Risk Of Thermal Injury To The Circuit Boards.
Suitable Size: The Rosin Pen Measures About 14.3 Cm/ 5.6 Inches In Length, And The Solder Braided Wick Is About 1.5M/ 59 Inches Long And 2.5Mm/ 0.1 Inches Wide, Which Is Convenient To Hold In Hand; Please Check The Size Carefully Before Purchasing.
Features
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
- See more on Amazon...
Brand: Ferraycle | Manufacturer: Ferraycle
See On Amazon #17
Weller WSW SCN M1 (T0051404799) Solder Wire, Dia: 0.5 mm / 0.020 in, Wt: 100 g / 3.527 oz, Alloy Sn99.3Cu0.6Ni0.05, Flux content 3.5%
Asin: B09LDHLM1F | Model: T0051404799 | PartNumber: T0051404799 | Ean: 0037103360137 | UPC: 037103360137
Brand: Weller | Manufacturer: Apex Tool Group
Weight: 0.22 Pounds
Warranty: No Warranty - Consumable
See On Amazon #18
Kester 186 Liquid Soldering Flux, RMA Rosin, 2-ounce Bottle
Asin: B01MR49JY1 | Ean: 0735255751758 | UPC: 735255751758
Brand: Kester | Manufacturer: Kester
See On Amazon #19
haisstronica 240PCS Solder Seal Wire Connectors Kit,26-10 Gauge Marine Grade Heat Shrink Wire Connectors,Waterproof Butt Connectors,Butt Splice Eletrical Wire Connectors Kit(5Colors/5Sizes)
Asin: B08F3ZM6Z9 | Ean: 0190372848697 | UPC: 190372848697
Long Term Reliability:We Can Handle Complex Wiring Connection Environments.Why?The Solder Seal Wire Connectors Heat-Shrink Tube Made Of Eva Materials Clearly Allows The User To See The Quality Of The Soldering Penetration.Heat Shrink Tubing Is Abrasion Resistant And Protects The Cable..
Rest Easy:The 240Pcs Solder Seal Wire Connectors Includes Yellow 20Pcs,Blue 50Pcs,Green 50Pcs,Red 70Pcs,White 50Pcs.Haisstronica Waterproof Wire Connectors Are Compliant With Rohs,Iso 9001:2008,Sgs,And Ce Standards.If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us.We Offer A 30-Day Money-Back Guarantee And A 12-Month Replacement Warranty,Giving Customers A 100% Satisfaction Guarantee For A Risk-Free Purchase!.
One And Only:Haisstronica's Waterproof Solder Wire Connectors Are Marked With Wire Gauges For Easy Identification.Just Measure The Wiring,And By Checking The Wire Gauge Markings On The Polyolefin Tubing,You Can Quickly Select The Appropriate Connector..
Impeccable Build Quality:Weatherproof.The Waterproof Solder Wire Connectors Is Made Of High-Quality Hot Melt Adhesive Material That Is Heated To Melt The Rich Adhesives And Wrap The Solder Wire Connectors.Form A Seal.Additional Moisture Resistance And Strength Are Key To A Durable And Strong Wire Connection Application In Wet Conditions!.
Features
- How To Choose The Right Wire Connectors In a Cookie-Cutter Product:A product is only as good as the materials it s made from.These solder seal wire connectors are composed of high-purity and thick solder rings,and the molten solder flows and adheres completely after heating wire for a rock-solid connection!Includes large wire connection applications.
- Impeccable Build Quality:Weatherproof.The Waterproof solder wire connectors is made of high-quality hot melt adhesive material that is heated to melt the rich adhesives and wrap the solder wire connectors.Form a seal.Additional moisture resistance and strength are key to a durable and strong wire connection application in wet conditions!
- Long Term Reliability:We can handle complex wiring connection environments.Why?The solder seal wire connectors heat-shrink tube made of EVA materials clearly allows the user to see the quality of the soldering penetration.Heat shrink tubing is abrasion resistant and protects the cable.
- One And Only:Haisstronica's waterproof solder wire connectors are marked with wire gauges for easy identification.Just measure the wiring,and by checking the wire gauge markings on the polyolefin tubing,you can quickly select the appropriate connector.
- Rest Easy:The 240pcs solder seal wire connectors includes Yellow 20pcs,Blue 50pcs,Green 50pcs,Red 70pcs,White 50pcs.Haisstronica waterproof wire connectors are compliant with ROHS,ISO 9001:2008,SGS,and CE standards.If for any reason you are not satisfied with your purchase, please contact us.We offer a 30-day money-back guarantee and a 12-month replacement warranty,giving customers a 100% satisfaction guarantee for a risk-free purchase!
- See more on Amazon...
Brand: haisstronica | Manufacturer: haisstronica
Dimensions: 0.50 x 4.72 x 2.36 inches
See On Amazon #20
Oudain 4 Pcs 12" x 9" High Temperature Carbon Felt Flame Resistant Welding Blanket Soldering Fire Blanket Brazing Fireproof Mat Protective Fabric Plumberpad for Soldering Welding Brazing Repairs
Asin: B0BM3QNKNF | Model: IE-Oudain-564 | PartNumber: IE-Oudain-564
Diverse Advantages: The Carbon Felts Have Thermal Stability After Exposure To Heat, Thick And Tear Resistant, Not Easy To Deform, With Soft Flame Retardant Felt Fibers To Be Applied For A Welding Table, Preventing Your Table From Burning.
Wide Applications: The Soldering Blanket Is Safe And Serviceable, Can Help To Keep Away From Burning Risks, Also Suitable For Grills, Auto Repair, Glass Blowing, Soldering Repairs And So On.
2 Grommets Design: The Welding Heat Blanket Is Designed With 2 Grommets At One End Of The Blanket, So You Can Hang Or Pin It In Place As You Want, Bringing You Much Convenience When You Use It In Daily Life.
Flame Retardant Felt Fiber Material: The Fireproof Mat Is Made Of Flame Retardant Felt Fiber, Can Stand Temperatures Up To 2000°Fahrenheit, Fireproof Enough To Effectively Prevent Flame And Avoid Fire Risks, So You Can Use It With Ease.
Features
- Specific Size: there are 4 pieces of welding blankets in the package, about 12 x 9 inches/ 30.5 x 23 cm, about 0.25 inches/ 0.6 cm in thickness, about 1.59 oz/ 45 g in weight, can be applied when you are welding
- Flame Retardant Felt Fiber Material: the fireproof mat is made of flame retardant felt fiber, can stand temperatures up to 2000 Fahrenheit, fireproof enough to effectively prevent flame and avoid fire risks, so you can use it with ease
- Diverse Advantages: the carbon felts have thermal stability after exposure to heat, thick and tear resistant, not easy to deform, with soft flame retardant felt fibers to be applied for a welding table, preventing your table from burning
- 2 Grommets Design: the welding heat blanket is designed with 2 grommets at one end of the blanket, so you can hang or pin it in place as you want, bringing you much convenience when you use it in daily life
- Wide Applications: the soldering blanket is safe and serviceable, can help to keep away from burning risks, also suitable for grills, auto repair, glass blowing, soldering repairs and so on
- See more on Amazon...
Brand: Oudain | Manufacturer: Oudain
See On Amazon
Looking For Something Else?
Search