Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B09B9DF96D | Model: XXX00 | PartNumber: XXX00 | Ean: 0632296853406 | UPC: 632296853406
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Widely Used: No-Clean Solder Braid Is Suitable For Welding Work In Laboratories, Industries, Schools And Homes, It Is Suitable For All Kinds Of Electronics, Electrical Appliances, Precision Instruments And Meters. It Can Absorb Tin Quickly And A Large Amount Of Tin, And Is Dedicated To Remove Excess Solder..
5.Ingenuity Quality: 1 Piece Of No-Clean Solder Braided Wicks (0.078 Inch Wide, 9.84 Ft Length), Which Is Sufficient To Meet Your Work Requirements. If You Have Any Product Questions, You Can Contact Us At Any Time..
4.Easy To Use: Desoldering Braid Is Used To Absorb Excess Solder When Removing Tin, The Fine Woven Design Promotes Strong Capillary Action To Suck In Excess Solder. The Main Board Desoldering Spot Is Removed, And It Is Used With The Soldering Station..
2.Geometric Braid Design: The Desoldering Wick Adopts A Precise Geometric Braid Design, Which Ensures A Large Surface Tension And Tin Absorption Ability, And Reduces The Risk Of Thermal Damage To The Circuit Board..
Features
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
- See more on Amazon...
Brand: Herain | Manufacturer: Herain
Dimensions: 0.40 x 1.85 x 1.85 inches
See On Amazon Similar To Herain NoClean Solder Wick Desoldering
#1
Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Asin: B094GZ6CPZ | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905286 | UPC: 606727905286
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-FT
Dimensions: 0.50 x 5.00 x 4.00 Inches | Weight: 0.50 ounces
See On Amazon #2
VIRALLOY Solder Sucker No Clog Desoldering Pump Soldering Sucker Perfect Desoldering Tool for Solder Remover with Strong Suction, Heat Resistant Pinecil Nozzle for Smooth Solder Inrush
Asin: B0B1MM14J2 | Model: SS-786 | PartNumber: SS-786 | Ean: 0195893507962 | UPC: 195893507962
✅ Sturdy: This Solder Pump Sucker Is Built With Premium 6061 Aircraft-Grade Aluminum For Maximum Durability.
✅ Maintenance: To Enjoy Long-Lasting Desolder Functionality, It Is Best Practice To Wipe Off Solder Residue And Stains That Appear Inside Of The Cylinder. Unscrew The Nozzle Unit, Remove The Spring, Clean The Cylinder With Cotton Swabs And Apply Grease To Internal Parts After Cleaning. Enarios.
✅ Spare Tubes: Provided With 8 Pcs Of Spare Tubes Of Suitable Lengths In A Small Container Which Are Good To Last For Quite A While.
✅ Better Results: This Desoldering Vacuum Gun Has Torn Up The Desoldering Rule Book By Revolutionizing Its Design To Increase Efficiency And Performance.
✅ Convenient: Aluminum Desolder Tool Designed To Be Easily Used With One Hand, Leaving The Other Free To Manipulate The Board Or Heat Source.
✅ Flexible Tip: Replaceable Silicone Nozzle Tip Of Solder Vacuum Is Suitable To Use With Pine64 And For Many Uneven Or Awkward Surfaces.
✅ Self-Cleaning: Pressing Plunger Cleans The Nozzle Unit Ejecting Solder Waste From The Desolder Pump.
✅ Powerful Suction: This Desolder Kit Is True Testament To Its Quality, Reliability, And Ease Of Use.
✅ Streamlined: The Solder Removal Tool Quickly Extracts Molten Solder And Leaves A Clean Working Area.
Features
- No Clog Design: The VIRALLOY Solder Sucker Desoldering Pump has a unique design that prevents clogging of the nozzle tip. This allows you to quickly remove solder without having to stop and clean out the nozzle tip
- Streamlined: The solder removal tool quickly extracts molten solder and leaves a clean working area
- Sturdy: This solder pump sucker is built with premium 6061 aircraft-grade aluminum for maximum durability
- Self-Cleaning: Pressing plunger cleans the nozzle unit ejecting solder waste from the desolder pump
- Convenient: Aluminum desolder tool designed to be easily used with one hand, leaving the other free to manipulate the board or heat source
- Flexible Tip: Replaceable silicone nozzle tip of solder vacuum is suitable to use with pine64 and for many uneven or awkward surfaces
- Spare Tubes: Provided with 8 pcs of spare tubes of suitable lengths in a small container which are good to last for quite a while
- Better Results: This desoldering vacuum gun has torn up the desoldering rule book by revolutionizing its design to increase efficiency and performance
- Powerful Suction: This desolder kit is true testament to its quality, reliability, and ease of use
- Maintenance: To enjoy long-lasting desolder functionality, it is best practice to wipe off solder residue and stains that appear inside of the cylinder. Unscrew the nozzle unit, remove the spring, clean the cylinder with cotton swabs and apply grease to internal parts after cleaning. Enarios
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.79 x 6.52 x 0.79 inches
See On Amazon #3
TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
Asin: B093ZYF99G
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
Dimensions: 0.39 x 118.11 x 0.08 inches | Weight: 0.01 pounds
See On Amazon #4
YIHUA 929D-V Electric Desoldering Soldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering
Asin: B094ZCRXMN | Ean: 5060497923478
Different From The Traditional Use-And-Throw Desoldering Irons, The 929D-V Can Be Used, Easily Cleaned, And Reused. You Can Lift And Pull Out The Scrap Solder Storage Tube And Clean The Solder Out Like A Breeze. Meanwhile, We Also Included 2 Different And Interchangeable Diameters (Φ1.0Mm & Φ1.2Mm) Desoldering Nozzles For Different Sizes Of Through-Hole Components. Note: Change The Nozzle After The Desoldering Iron Has Cooled Completely..
Choose Yihua With Confidence - Our Us-Exclusive 12-Month Manufacturer Warranty Will Apply To Your Purchase. Plus, Our Team Is Providing Professional Assistance 24/7 On Amazon. Note: This Model Only Works On 110-127V With Its Usa Plug. This Product Contains Electrical Insulator Protective Material (Mica), It Is Normal For The Product To Emit White Fumes For No Longer Than 20 Minutes On First Use. This Is A Normal And Intended Occurrence For This Product, Please Rest Assure For Safe Usage..
This Desoldering Iron Comes With A Heat Deflector At The End Of The Heating Element, And This Prevents The Excess Heat From Transferring Onto The Hand When Desoldering Continuously. You Can Desolder Joints After Joints Without Your Hands Feeling Uncomfortably Hot..
This Is A Plug-N-Play Desoldering Iron. Plug In The Power Plug, Allow The Desoldering Iron To Preheat For Approximately 3 Minutes, And You Are Ready To Go. Yihua Exclusive Heating System Combined With A Strong Desoldering Pump Ensures You Experience Uninterrupted Desoldering..
Features
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters ( 1.0mm & 1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
- Choose YIHUA with Confidence - Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
- See more on Amazon...
Brand: YIHUA | Manufacturer: Guangzhou Yihua Electronic Equipment Co., Ltd.
Dimensions: 1.06 x 10.24 x 1.38 inches
See On Amazon #5
TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'
Asin: B09XGY9M5H | Model: SW-2515 | PartNumber: SW-2515
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty :If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
See On Amazon #6
SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Asin: B09PZLZSNT | Model: SW-2.5-NC-10-3P | PartNumber: SW-2.5-NC-10-3P | Ean: 0742383847994 | UPC: 742383847994
Easy To Use: Simply Place Desolder Wick Over Work And Apply Heat To Remove Solder From Parts And Terminals, Break Solder Bridges, And Correct Other Soldering Mistakes..
Pcb Safe Residues: Desolder Wick Leaves Little Flux Residue That Is Non-Conductive And Non-Corrosive So It Requires No Cleaning. This Product Is Also Rohs Compliant..
Fast & Effective Wicking: Unique Gap-Weave Coated Solder Wick Braid Absorbs Solder Quickly Like A Sponge, Reducing The Likelihood Of Overheating And Lifted Pads..
High Quality Materials: Impurity-Free Woven Copper Desolder Braid Construction With 3% No-Clean Flux Provides Superior Conductivity, Even At Low Temperatures..
Features
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- See more on Amazon...
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
See On Amazon #7
No Clean Soldering Flux Paste & Solder Wick, Solder Flux for Electronics Soldering 10cc/Bottle (2PACK), 10Ft Desoldering Wick Braid Remover Solder
Asin: B0CH6LBTK4 | Model: RMA100X2+XXX2530 | PartNumber: RMA100X2+XXX2530
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily.
Works Excellent For Desoldering Items.
Features
- Lead-Free, Excellent Wetting, No Need To Clean After Using
- Works Excellent for Desoldering Items
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- See more on Amazon...
Brand: Essmetuin | Manufacturer: ZHUOBAO
Dimensions: 4.00 x 1.00 x 2.00 inches
See On Amazon #8
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 inches
See On Amazon #9
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
Asin: B0195UVWJ8 | Model: SW02-10 | PartNumber: SW02-10 | Ean: 0768249099987 | UPC: 768249099987
100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 Pounds
See On Amazon #10
MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue
Asin: B008O9VLA2 | Model: 426 | PartNumber: 426 | Ean: 0779008426005 | UPC: 779008426005
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.04 x 0.04 x 0.01 inches | Weight: 0.02 pounds
See On Amazon #11
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
Asin: B098X43NQ6
Quality Material: These No Clean Soldering Wicks Are Made Of Quality Copper Wire And Adopt Precise Weaving Technology, Which Can Enhance Tension On The Surface To Absorb Excess Solder; The Liquid Solder Pen Is Made Of Reliable Materials, No Leaking And Safe For Protecting The Flux, Preventing You From Touching The Organic Solvents.
Wide Applications: These Soldering Pens And Braided Solder Wicks Can Be Applied For Laboratory, Computer, Home Repairs And Correcting Small Pcb Board Errors And Through Hole Solder Joints, Electronics Welding, Etc., Bringing A Lot Of Convenience To Your Work And Improving Efficiency.
Practical Tools: 10-Ml Solder Pen With Soft Brush Tip Can Release The Liquid Flow Moderately, Which Can Clean The Components Without Harming The Pcb Board Copper Foil Or Ic Pin; The Solder Remover Wick Features Good Thermal Conductivity And Absorption, Useful To Reduce The Risk Of Thermal Injury To The Circuit Boards.
Suitable Size: The Rosin Pen Measures About 14.3 Cm/ 5.6 Inches In Length, And The Solder Braided Wick Is About 1.5M/ 59 Inches Long And 2.5Mm/ 0.1 Inches Wide, Which Is Convenient To Hold In Hand; Please Check The Size Carefully Before Purchasing.
Features
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
- See more on Amazon...
Brand: Ferraycle | Manufacturer: Ferraycle
See On Amazon #12
MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool
Asin: B08QW6HVX2 | Model: DP-01 | PartNumber: DP-01 | Ean: 0767583529211 | UPC: 767583529211
( Desoldering Wick With Copper Braid ) 1Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
( Widely Used Solder Remover ) The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
( Abs Body With Non-Slip Sponge And Nylon Nozzle Desoldering Pump ) The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
( One-Handed Solder Sucker With Powerful Suction ) You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
Features
- ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 inches | Weight: 0.19 pounds
See On Amazon #13
YIHUA 948 Standard Desoldering Station, 80W, with Auto Shutoff, Variable Precise Temperature (716 F ~ 896 F), C/ F display, Sleep Function and More.
Asin: B08BK69H2M | Model: 948 | PartNumber: 948 | Ean: 5060497922310
Single-Handed – The 948 Is Unlike Any Conventional Desoldering Methods, Where You Hold The Iron In One Hand And The Desoldering Tool In The Other. Our 948 Desoldering Station Allows You To Aim And Desolder With Just One Hand..
Choose Yihua With Confidence- This Product Includes Quality Accessories And Tools To Provide An Optimal Experience For Your Work. 12-Month Usa Warranty (Exclusive). Plus, Our Team Is Providing Professional Assistance 24/7 Right On Amazon. Questions And Suggestions Are Welcome. Note: Spare Parts Are Readily Available In This Store. This Model Works On 110-127V With Its Usa Plug. Caution: Must Not Be Plugged Directly Into A 220V~240V Electrical Outlet.
Replaceable Tube – Depending On Your Rate Of Application, You Can Choose To Either Clean Or Replace The Filter Tube And Its Components At Will. The Cleaning Option Is Quick And Easy For Users With A Lower Usage Rate, While The Disposable Option Is Great And Cost-Effective For Users Who Require Desoldering On A Daily Basis..
Like A Lawnmower – You Can Mow Down A Series Of Solder Joints With Absolute Ease And Efficiency, The 948 Desoldering Station Enables You To Desolder Continuously With Little Efforts Required. The Station Combines Stabilized Nozzle Temperature With Powerful Suction To Ensure A Guaranteed Solder Extraction For You..
Features
- A new way to desolder If you get a 948 desoldering station, you'll enjoy the full benefit of efficient desoldering. The use of solder wick and desoldering pumps can satisfy occasional desoldering applications. But when compared with the 948 desoldering station in removing a large number of joints, these methods will be significantly less efficient.
- Like a lawnmower You can mow down a series of solder joints with absolute ease and efficiency, the 948 desoldering station enables you to desolder continuously with little efforts required. The station combines stabilized nozzle temperature with powerful suction to ensure a guaranteed solder extraction for you.
- Single-handed The 948 is unlike any conventional desoldering methods, where you hold the iron in one hand and the desoldering tool in the other. Our 948 desoldering station allows you to aim and desolder with just one hand.
- Replaceable Tube Depending on your rate of application, you can choose to either clean or replace the filter tube and its components at will. The cleaning option is quick and easy for users with a lower usage rate, while the disposable option is great and cost-effective for users who require desoldering on a daily basis.
- Choose Yihua with confidence- this product includes quality accessories and tools to provide an optimal experience for your work. 12-Month USA Warranty (Exclusive). Plus, our team is providing professional assistance 24/7 right on Amazon. Questions and Suggestions are welcome. NOTE: Spare parts are readily available in this store. This model works on 110-127V with its USA plug. CAUTION: MUST NOT be plugged directly into a 220V~240V electrical outlet
- See more on Amazon...
Brand: YIHUA | Manufacturer: Guangzhou Yihua Electronic Equipment Co., Ltd.
Dimensions: 5.28 x 9.21 x 7.95 inches
See On Amazon #14
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
Asin: B07CB9V427 | Ean: 0601263548355 | UPC: 601263548355
High Quality Material - The Desoldering Pump Body Made Of Premium Quality Abs Material, With Non-Slip Sponge And Nylon Nozzle, Anti-Static, Heat Resistant And Durable.
7-In-1 Solder Removal Tool - 1Pcs Solder Sucker And 6Pcs Solder Wicks In 3 Size.
Wide Application - Correcting Mistakes On Small Pcb Boards, Removing Relays And Other Components From Printed Circuit Boards, Cleaning Small Components, Re-Soldering And Desoldering.
Desoldering Braid Wick With Rosin - 6 Pieces Copper Solder Braid In 3 Size, Width 2.0Mm/2.5Mm/3.0Mm, Length 1.5M, 2 Pieces For Each Size; Geometrically-Precise Weave, Can Be Used To Clean The Spare Solder On The Pin Away To Avoid Short Circuit, To Meet Your Various Of Soldering Needs.
Features
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
- See more on Amazon...
Brand: AUSTOR | Manufacturer: AUSTOR
Dimensions: 0.79 x 7.48 x 5.12 inches
See On Amazon #15
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
Asin: B09BBBY4HP | Model: 366D | PartNumber: 366D | Ean: 0751242241705 | UPC: 751242241705
【One-Handed Solder Sucker With Powerful Suction】: Whether You Are Right Or Left-Handed, You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
【Widely Used Solder Remover】:The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
Abs Body With Non-Slip Sponge And Nylon Nozzle Solder Wick - The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold. Right Or Left Handed Design Allows Easy One-Handed Use..
Desoldering Wick With Copper Braid - Solder Wire, Replacement Tip, 2Pcs Solder Braid (3.5Mm/2.0Mm Width, 1.5M Length). 100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder..
Features
- 6-in-1 Solder Removal Tool : 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
- One-handed solder sucker with powerful suction : Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use.
- Widely used Solder Remover :The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 inches | Weight: 0.22 pounds
See On Amazon #16
BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m)
Asin: B0CB3QGXR8 | Model: US-RX2530 | PartNumber: US-RX2530
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Solder Wick Braid Wide Range Of Use: The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials:The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.20 x 0.20 inches
See On Amazon #17
No Clean Soldering Flux Paste & Solder Wick, Desoldering Wick 10Ft Braid for Remover Solder Solder Flux for Electronics Soldering 10cc/Bottle(2PACK)
Asin: B0CVZPCD3L | Model: RMA799X2+1 | PartNumber: RMA799X2+1
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
Flux Can Help To Remove The Oxide Layer On The Welding Surface Easily.
Works Excellent For Desoldering Items.
Features
- Lead-Free, Halogen Free, Non-Corrosive, Good Flow Ability
- Works Excellent for Desoldering Items
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- Flux Can Help To Remove The Oxide Layer On The Welding Surface Easily
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- See more on Amazon...
Brand: Essmetuin | Manufacturer: ZHUOBAO
See On Amazon #18
Blulu 6 Pcs 10ml 8341 No Clean Solder Flux Paste and Solder Wicks Tacky Soldering Flux with Plunger and Dispensing Tip 1.5 Meter Length Solder Wick Braid for Electronics
Asin: B0CBM7HNGR
No Clean Design: The No Clean Solder Wick Will Just Leave Little Residues After Use And The Residues Are Non Conductive And Non Corrosive, You Do Not Need To Spending Time Removing Them From The Boards.
Serviceable Quality: No Clean Flux Paste Has Instant Wetting, Excellent Fluxing Ability, No Washing, Strong Viscosity, Bright Solder Joints; The Solder Braid Wick Is Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
Boost Design: The Canned Push Design Of The Soldering Paste Makes The Flow Smoother, No Waste In The Soldering Process, And Is Easy To Store And Use; The Canned Push Design Does Not Contain Rubber Plugs, Which Is More Labor Saving And Easy To Operate; After Use, The Push Rod Can Be Taken Out And The Original Cover Can Be Put On For Easy Storage.
Convenient To Use: The Electronics Soldering Flux Is Equipped With Plunger And Dispensing Tip, Which Is More Convenient To Use, And Can Accurately Place The Flux To The Required Place, Making Your Circuit Board And Other Manufacturing And Maintenance More Convenient.
Features
- What You Will Get: you will receive 3 pieces of 10ml solder flux paste, 3 pieces of plunger and 6 pieces of dispensing tip, also coming with 3 pieces of no clean solder wicks; The quantity is sufficient to meet the needs of daily maintenance
- Convenient to Use: the electronics soldering flux is equipped with plunger and dispensing tip, which is more convenient to use, and can accurately place the flux to the required place, making your circuit board and other manufacturing and maintenance more convenient
- No Clean Design: the no clean solder wick will just leave little residues after use and the residues are non conductive and non corrosive, you do not need to spending time removing them from the boards
- Boost Design: the canned push design of the soldering paste makes the flow smoother, no waste in the soldering process, and is easy to store and use; The canned push design does not contain rubber plugs, which is more labor saving and easy to operate; After use, the push rod can be taken out and the original cover can be put on for easy storage
- Serviceable Quality: no clean flux paste has instant wetting, excellent fluxing ability, no washing, strong viscosity, bright solder joints; The solder braid wick is made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- See more on Amazon...
Brand: Blulu | Manufacturer: Blulu
See On Amazon #19
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Asin: B0777LMVTT | Model: . | PartNumber: . | Ean: 0766894880417 | UPC: 766894880417
【Premium Desoldering Pump】The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
【Widely Used Solder Remover】The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
【3-In-1 Solder Removal Tool】1Pcs Desoldering Vacuum Pumps And 2Pcs Solder Wicks, A Must-Have Tool For Electronics Kit, The Desoldering Wick Absorbs Solder, The Desoldering Pump Pulls It Away Quick, While The Solder Wick Is Better For Small Amounts Of Solder, The Solder Sucker Takes Up Large Amounts..
【Desoldering Wick With Copper Braid】2Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Features
- Easy to Use Solder Sucker Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- Desoldering Wick with Copper Braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- Premium Desoldering Pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Widely Used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: Tabiger | Manufacturer: TABIGER
Dimensions: 0.70 x 9.00 x 4.00 inches | Weight: 0.17 Pounds
See On Amazon
Looking For Something Else?
Search