BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m)
Asin: B0CB3QGXR8 | Model: US-RX2530 | PartNumber: US-RX2530
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Solder Wick Braid Wide Range Of Use: The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials：The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.20 x 0.20 inches
See On Amazon Similar To BEEYUIHF 3M 10ft 2.5mm Desoldering
#1
Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Asin: B094GZ6CPZ | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905286 | UPC: 606727905286
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
Brand: Lesnow | Manufacturer: Lesnow-FT
Dimensions: 0.50 x 5.00 x 4.00 Inches | Weight: 0.50 ounces
See On Amazon #2
VIRALLOY Solder Sucker No Clog Desoldering Pump Soldering Sucker Perfect Desoldering Tool for Solder Remover with Strong Suction, Heat Resistant Pinecil Nozzle for Smooth Solder Inrush
Asin: B0B1MM14J2 | Model: SS-786 | PartNumber: SS-786 | Ean: 0195893507962 | UPC: 195893507962
✅ Sturdy: This Solder Pump Sucker Is Built With Premium 6061 Aircraft-Grade Aluminum For Maximum Durability.
✅ Maintenance: To Enjoy Long-Lasting Desolder Functionality, It Is Best Practice To Wipe Off Solder Residue And Stains That Appear Inside Of The Cylinder. Unscrew The Nozzle Unit, Remove The Spring, Clean The Cylinder With Cotton Swabs And Apply Grease To Internal Parts After Cleaning. Enarios.
✅ Spare Tubes: Provided With 8 Pcs Of Spare Tubes Of Suitable Lengths In A Small Container Which Are Good To Last For Quite A While.
✅ Better Results: This Desoldering Vacuum Gun Has Torn Up The Desoldering Rule Book By Revolutionizing Its Design To Increase Efficiency And Performance.
✅ Convenient: Aluminum Desolder Tool Designed To Be Easily Used With One Hand, Leaving The Other Free To Manipulate The Board Or Heat Source.
✅ Flexible Tip: Replaceable Silicone Nozzle Tip Of Solder Vacuum Is Suitable To Use With Pine64 And For Many Uneven Or Awkward Surfaces.
✅ Self-Cleaning: Pressing Plunger Cleans The Nozzle Unit Ejecting Solder Waste From The Desolder Pump.
✅ Powerful Suction: This Desolder Kit Is True Testament To Its Quality, Reliability, And Ease Of Use.
✅ Streamlined: The Solder Removal Tool Quickly Extracts Molten Solder And Leaves A Clean Working Area.
Features
- No Clog Design: The VIRALLOY Solder Sucker Desoldering Pump has a unique design that prevents clogging of the nozzle tip. This allows you to quickly remove solder without having to stop and clean out the nozzle tip
- Streamlined: The solder removal tool quickly extracts molten solder and leaves a clean working area
- Sturdy: This solder pump sucker is built with premium 6061 aircraft-grade aluminum for maximum durability
- Self-Cleaning: Pressing plunger cleans the nozzle unit ejecting solder waste from the desolder pump
- Convenient: Aluminum desolder tool designed to be easily used with one hand, leaving the other free to manipulate the board or heat source
- Flexible Tip: Replaceable silicone nozzle tip of solder vacuum is suitable to use with pine64 and for many uneven or awkward surfaces
- Spare Tubes: Provided with 8 pcs of spare tubes of suitable lengths in a small container which are good to last for quite a while
- Better Results: This desoldering vacuum gun has torn up the desoldering rule book by revolutionizing its design to increase efficiency and performance
- Powerful Suction: This desolder kit is true testament to its quality, reliability, and ease of use
- Maintenance: To enjoy long-lasting desolder functionality, it is best practice to wipe off solder residue and stains that appear inside of the cylinder. Unscrew the nozzle unit, remove the spring, clean the cylinder with cotton swabs and apply grease to internal parts after cleaning. Enarios
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.79 x 6.52 x 0.79 inches
See On Amazon #3
YIHUA 929D-V Electric Desoldering Soldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering
Asin: B094ZCRXMN | Ean: 5060497923478
Different From The Traditional Use-And-Throw Desoldering Irons, The 929D-V Can Be Used, Easily Cleaned, And Reused. You Can Lift And Pull Out The Scrap Solder Storage Tube And Clean The Solder Out Like A Breeze. Meanwhile, We Also Included 2 Different And Interchangeable Diameters (Φ1.0Mm & Φ1.2Mm) Desoldering Nozzles For Different Sizes Of Through-Hole Components. Note: Change The Nozzle After The Desoldering Iron Has Cooled Completely..
Choose Yihua With Confidence - Our Us-Exclusive 12-Month Manufacturer Warranty Will Apply To Your Purchase. Plus, Our Team Is Providing Professional Assistance 24/7 On Amazon. Note: This Model Only Works On 110-127V With Its Usa Plug. This Product Contains Electrical Insulator Protective Material (Mica), It Is Normal For The Product To Emit White Fumes For No Longer Than 20 Minutes On First Use. This Is A Normal And Intended Occurrence For This Product, Please Rest Assure For Safe Usage..
This Desoldering Iron Comes With A Heat Deflector At The End Of The Heating Element, And This Prevents The Excess Heat From Transferring Onto The Hand When Desoldering Continuously. You Can Desolder Joints After Joints Without Your Hands Feeling Uncomfortably Hot..
This Is A Plug-N-Play Desoldering Iron. Plug In The Power Plug, Allow The Desoldering Iron To Preheat For Approximately 3 Minutes, And You Are Ready To Go. Yihua Exclusive Heating System Combined With A Strong Desoldering Pump Ensures You Experience Uninterrupted Desoldering..
Features
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters ( 1.0mm & 1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
- Choose YIHUA with Confidence - Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
- See more on Amazon...
Brand: YIHUA | Manufacturer: Guangzhou Yihua Electronic Equipment Co., Ltd.
Dimensions: 1.06 x 10.24 x 1.38 inches
See On Amazon #4
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 inches
See On Amazon #5
MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool
Asin: B08QW6HVX2 | Model: DP-01 | PartNumber: DP-01 | Ean: 0767583529211 | UPC: 767583529211
( Desoldering Wick With Copper Braid ) 1Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
( Widely Used Solder Remover ) The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
( Abs Body With Non-Slip Sponge And Nylon Nozzle Desoldering Pump ) The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
( One-Handed Solder Sucker With Powerful Suction ) You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
Features
- ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 Inches | Weight: 0.19 Pounds
See On Amazon #6
WEP 929D-V 2 IN 1 Desoldering Iron Electric Solder Sucker with 5 Nozzles 0.8/1.0/1.2/1.5mm Soldering Tool Kit with Built-in Desoldering Pump, Iron Stand, Sponge, Cleaning Pin Solder Remover
Asin: B0CFDVK6Q3 | Model: WEP 929D-V | PartNumber: WEP 929D-V | Ean: 6974443672497
Easy To Operate: It Needs 3 Minutes Of Preheating When Connected To Power. To Use, Charge The Piston, Melt The Solder 100%, And Press The Release To Extract The Solder. Our Desoldering Kit Includes 5 Desoldering Nozzles That Are Replaceble. (Nozzles Are Consumable Items) Note: Replace The Nozzle After The Desolder Iron Has Cooled Completely.
Choose Wep With Confidence: This Desoldering Iron Kit Is Covered By Our Usa Exclusive 1-Year Product Warranty, And Our Technical Support Team Has Your Back With Our 24-Hour Support. Note: This Product Is Rated For 110~127V Usa Specification, Do Not Connect This Iron To A 220V Power Socket..
Easy To Clean: Our Product Is Super Easy To Clean.Cleaning Can Effectively Prevent Blockages From Damaging The Product. The Scrap Solder Storage Tube Is Removable For Cleaning, And Our Desolder Removal Kit Comes With A Cleaning Pin That Is Used To Clean The Heating Element..
Safe Continuous Desoldering: This Product Is 2 In 1 Soldering Iron And Desoldering Iron That Can Be Operated With A Single Hand. Our Solder Sucker Tool Provides A Uninterrupted Desoldering Experience, And The Heat Deflector Reduces Heat For Your Hands, And You Can Desolder Components With Comfort. The Desoldering Kit Is Also Equipped With A Simple Soldering Iron Stand, Allowing The Solder Sucker Can Rest Securely On The Stand When Not In Use..
Features
- Complete set of accessories: Our desoldering tool kit includes WEP 929D-V Desoldering Iron, 5 interchangeable desoldering nozzles (0.8mm & 1.0mm & 1.2mm & 1.5mm ) for 4 different sizes of through-hole components, a heat-resistant iron stand, a cleaning sponge, some cleaning pins. If you are looking for a complete desoldering tool that can handle desoldering jobs for various through-hole components without clogging, it is time to buy this one.
- Safe continuous desoldering: This product is 2 IN 1 soldering iron and desoldering iron that can be operated with a single hand. Our solder sucker tool provides a uninterrupted desoldering experience, and the heat deflector reduces heat for your hands, and you can desolder components with comfort. The desoldering kit is also equipped with a simple soldering iron stand, allowing the solder sucker can rest securely on the stand when not in use.
- Easy to operate: It needs 3 minutes of preheating when connected to power. To use, charge the piston, melt the solder 100%, and press the release to extract the solder. Our desoldering kit includes 5 desoldering nozzles that are replaceble. (Nozzles are consumable items) Note: Replace the nozzle after the desolder iron has cooled completely
- Easy to clean: Our product is super easy to clean.Cleaning can effectively prevent blockages from damaging the product. The scrap solder storage tube is removable for cleaning, and our desolder removal kit comes with a cleaning pin that is used to clean the heating element.
- Choose WEP with confidence: This desoldering iron kit is covered by our USA exclusive 1-Year product warranty, and our technical support team has your back with our 24-Hour support. NOTE: this product is rated for 110~127V USA Specification, DO NOT connect this iron to a 220V power socket.
- See more on Amazon...
Brand: WEP | Manufacturer: Guangzhou Yihua Electronic Equipment Co., Ltd.
Dimensions: 1.06 x 10.24 x 1.38 Inches
See On Amazon #7
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
Asin: B07CB9V427 | Ean: 0601263548355 | UPC: 601263548355
High Quality Material - The Desoldering Pump Body Made Of Premium Quality Abs Material, With Non-Slip Sponge And Nylon Nozzle, Anti-Static, Heat Resistant And Durable.
7-In-1 Solder Removal Tool - 1Pcs Solder Sucker And 6Pcs Solder Wicks In 3 Size.
Wide Application - Correcting Mistakes On Small Pcb Boards, Removing Relays And Other Components From Printed Circuit Boards, Cleaning Small Components, Re-Soldering And Desoldering.
Desoldering Braid Wick With Rosin - 6 Pieces Copper Solder Braid In 3 Size, Width 2.0Mm/2.5Mm/3.0Mm, Length 1.5M, 2 Pieces For Each Size; Geometrically-Precise Weave, Can Be Used To Clean The Spare Solder On The Pin Away To Avoid Short Circuit, To Meet Your Various Of Soldering Needs.
Features
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
- See more on Amazon...
Brand: AUSTOR | Manufacturer: AUSTOR
Dimensions: 0.79 x 7.48 x 5.12 inches
See On Amazon #8
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
Asin: B09BBBY4HP | Model: 366D | PartNumber: 366D | Ean: 0751242241705 | UPC: 751242241705
【One-Handed Solder Sucker With Powerful Suction】: Whether You Are Right Or Left-Handed, You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
【Widely Used Solder Remover】:The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
Abs Body With Non-Slip Sponge And Nylon Nozzle Solder Wick - The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold. Right Or Left Handed Design Allows Easy One-Handed Use..
Desoldering Wick With Copper Braid - Solder Wire, Replacement Tip, 2Pcs Solder Braid (3.5Mm/2.0Mm Width, 1.5M Length). 100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder..
Features
- 6-in-1 Solder Removal Tool : 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
- One-handed solder sucker with powerful suction : Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use.
- Widely used Solder Remover :The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 inches | Weight: 0.22 pounds
See On Amazon #9
HANDSKIT Electric Desoldering Pump Desoldering Iron Solder Sucker with Shorter Charging Handle and Desoldering Suction Nozzles for Through Hole Desoldering Repairing
Asin: B09QMLVCW4
【Convenient And Safe】Compact And Lightweight To Carry Everywhere.Plug And Play,No Soldering Station Needed.Non-Slip Grip Ensures It Won't Be Let Go While Using.The Heat Deflector Can Reduce The Heat Transferring To Your Hand.
【Service And Guarantee】We Offer Warranty Service.If Any Questions About This Desoldering Pump,Please Contact Us,We Will Always Online For You.
【Reusable And Wide Application】Handskit Desoldering Solder Sucker Can Be Reused After The Solder Cleaning Up.It Can Be Widely Used In Soldering Or Repairing Of Small Appliances Watches,Mobile Phones,Jewelry,Home Diy And Desoldering Of Circuit Board And So On.
【No Jam And Easy To Clean】Easily Handle The Desoldering Jobs Of Through-Hole Components With Only One Hand.No Jam On Removing Excess Solder (Solder Bridges),Just Lift And Pull Out The Scrap Solder Storage Tube And Clean Them Up.
Features
- Desoldering Solder Sucker HANDSKIT desoldering pump is more friendly to single handed and continuous desoldering.Also,1.35m power cord help you to rid the hassle of changing grip positions
- No Jam and Easy to Clean Easily handle the desoldering jobs of through-hole components with only one hand.No jam on removing excess solder (solder bridges),just lift and pull out the scrap solder storage tube and clean them up
- Convenient and safe Compact and lightweight to carry everywhere.Plug and play,no soldering station needed.Non-slip grip ensures it won't be let go while using.The heat deflector can reduce the heat transferring to your hand
- Reusable and Wide Application HANDSKIT desoldering solder sucker can be reused after the solder cleaning up.It can be widely used in soldering or repairing of small appliances watches,mobile phones,jewelry,home DIY and desoldering of circuit board and so on
- Service and Guarantee We offer warranty service.If any questions about this desoldering pump,please contact us,we will always online for you
- See more on Amazon...
Brand: HANDSKIT | Manufacturer: YU-154
See On Amazon #10
EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool - Blue
Asin: B01N1EZNVF | Model: i025 | PartNumber: i025 | Ean: 0014286208562 | UPC: 014286208562
Excellent Thermal Transfer For Faster, Safer Desoldering Using Lower Temperature Irons.
Special Design: Right Or Left Handed Design Allows Easy One-Handed Use.
High Quality Solder Sucker & Light Material: Super High Pressure Vacuum With Aluminum Body Frame With Right Size: 7-1/2" Length X 3/4" Diameter.
Pure Oxygen Free Copper Wire With 0.1"W X 5'L, Weight 0.4Oz.
Features
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1W x 5'L, weight 0.4oz
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2 length x 3/4 diameter
- Special Design: Right or Left handed design allows easy one-handed use
- See more on Amazon...
Brand: EVERMARKET | Manufacturer: EVERMARKET
See On Amazon #11
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Asin: B0777LMVTT | Model: . | PartNumber: . | Ean: 0766894880417 | UPC: 766894880417
【Premium Desoldering Pump】The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
【Widely Used Solder Remover】The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
【3-In-1 Solder Removal Tool】1Pcs Desoldering Vacuum Pumps And 2Pcs Solder Wicks, A Must-Have Tool For Electronics Kit, The Desoldering Wick Absorbs Solder, The Desoldering Pump Pulls It Away Quick, While The Solder Wick Is Better For Small Amounts Of Solder, The Solder Sucker Takes Up Large Amounts..
【Desoldering Wick With Copper Braid】2Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Features
- Easy to Use Solder Sucker Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- Desoldering Wick with Copper Braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- Premium Desoldering Pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Widely Used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
Brand: Tabiger | Manufacturer: TABIGER
Dimensions: 0.70 x 9.00 x 4.00 inches | Weight: 0.17 Pounds
See On Amazon #12
Preciva 929D-V Electric Desoldering Iron Solder Sucker, Portable Desoldering Gun,110V Desoldering Pumps with Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering
Asin: B09MZ16JBV
✿Thoughtful Design: We Have Matched 2 Kinds Of Desoldering Tips With Different Diameters (Φ1.0Mm & Φ1.2Mm), Which Can Be Replaced With Different Desoldering Tips According To Different Solder Joints To Prevent Clogging, We Also Paired With A Cleaning Needle To Further Prevent Clogging Problems,Note: Replace The Nozzle After The Soldering Iron Has Cooled Down Completely..
✿Value Prodact: There Are Also Two Built-In Gaskets. If You Feel That The Suction Is Too Small, It May Be That The Gaskets Are Aging, And The Strong Suction Can Be Restored After Replacement. 30 Days No Reason To Return Or Exchange, Please Feel Free To Contact Us If You Have Any Questions!.
✿Widely Used: Desoldering Pumps Can Be Used To Correct Small Board Errors On The Pcb, Re-Soldering And Desoldering,Removing Relays And Other Components From The Printed Circuit Board, Etc. To Meet Your Various Soldering Needs..
✿High-Quality Materials: Made Of Abs Material, With Anti-Skid Handle, Nylon Nozzles,Unlike The Old-Fashioned Desoldering Gun, This Solder Sucker Is Plugged Into The Power Plug, And The Desoldering Is Preheated For About 3 Minutes, And The Process Of Tin Melting/Absorption Can Be Performed, Comfortable Grip..
Features
- EASY TO OPERATE: The 929D-V desoldering pump is a combination of soldering iron and desoldering, designed with a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up,which can enjoy one-hand continuous desoldering.
- HIGH-QUALITY MATERIALS: Made of ABS material, with anti-skid handle, nylon nozzles,Unlike the old-fashioned desoldering gun, this solder sucker is plugged into the power plug, and the desoldering is preheated for about 3 minutes, and the process of tin melting/absorption can be performed, Comfortable grip.
- THOUGHTFUL DESIGN: We have matched 2 kinds of desoldering tips with different diameters ( 1.0mm & 1.2mm), which can be replaced with different desoldering tips according to different solder joints to prevent clogging, We also paired with a cleaning needle to further prevent clogging problems,Note: Replace the nozzle after the soldering iron has cooled down completely.
- WIDELY USED: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering,removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
- VALUE PRODACT: There are also two built-in gaskets. If you feel that the suction is too small, it may be that the gaskets are aging, and the strong suction can be restored after replacement. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!
- See more on Amazon...
Brand: Preciva | Manufacturer: Preciva
Dimensions: 2.00 x 11.00 x 3.00 inches
See On Amazon #13
TOWOT Desoldering Wick Braid With Flux No-Clean Electronic,Solder Wick Braid Remover.Desolder Soldering 3mm W 0.12'' L 9.8'
Asin: B0943VKMZM | Model: W 0.12'' L 9.8' | PartNumber: W 0.12'' L 9.8'
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty ：If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Brand: TOWOT | Manufacturer: TOWOT
See On Amazon #14
BEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Asin: B0CPTTFS5D | Model: US-RX25300 | PartNumber: US-RX25300
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Wide Range Of Use:The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials：The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Features
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 1.00 x 2.30 x 2.30 Inches | Weight: 0.20 pounds
See On Amazon #15
12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)
Asin: B08V8QC8Y1
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, Home, School And Industry Welding Work; And The Wicks Adopt Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience For Your Daily Work.
Quality Material: The Desoldering Wicks Are Made Of Quality Copper Wires, And The Design Of Precise Weaving Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing The Work Efficiency.
Features
- Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
- Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
- Extensive applications: the braided solder wicks are suitable for labs, home, school and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work
- See more on Amazon...
Brand: Hotop | Manufacturer: Hotop
See On Amazon #16
Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B09K6KP8CT | Model: XXX00 | PartNumber: XXX00 | Ean: 0632296853659 | UPC: 632296853659
3.Widely Used: No-Clean Solder Braid Is Suitable For Welding Work In Laboratories, Industries, Schools And Homes, It Is Suitable For All Kinds Of Electronics, Electrical Appliances, Precision Instruments And Meters. It Can Absorb Tin Quickly And A Large Amount Of Tin, And Is Dedicated To Remove Excess Solder..
5.Ingenuity Quality: 1 Piece Of No-Clean Solder Braided Wicks (0.078 Inch Wide, 9.84 Ft Length), Which Is Sufficient To Meet Your Work Requirements. If You Have Any Product Questions, You Can Contact Us At Any Time..
4.Easy To Use: Desoldering Braid Is Used To Absorb Excess Solder When Removing Tin, The Fine Woven Design Promotes Strong Capillary Action To Suck In Excess Solder. The Main Board Desoldering Spot Is Removed, And It Is Used With The Soldering Station..
2.Geometric Braid Design: The Desoldering Wick Adopts A Precise Geometric Braid Design, Which Ensures A Large Surface Tension And Tin Absorption Ability, And Reduces The Risk Of Thermal Damage To The Circuit Board..
Features
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
- See more on Amazon...
Brand: Herain | Manufacturer: Herain
Dimensions: 0.40 x 1.85 x 1.85 inches
See On Amazon #17
caihongwei caihv-Welding Rod, Solder Wick 1.0mm-2.5mm 3.0mm 3.5mm 4.0mm Desoldering Braid Wire, Tin Remover BGA Welding Soldering Tools, Strong and Durable (Diameter : 4.0mm)
Asin: B09BDVC9JD | Model: caihongwei | PartNumber: caihongwei | Ean: 7375995158535
Function : Used To Remove Excess Solder..
It Is Non-Toxic, Tasteless And Very Safe To Use..
Made Of High-Quality Materials..
Feature : Anti-Oxidation,Anti-Corrosion..
Features
- Width : 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm.
- Feature : Anti-oxidation,anti-corrosion.
- Function : Used to remove excess solder.
- Made of high-quality materials.
- It is non-toxic, tasteless and very safe to use.
- See more on Amazon...
Brand: caihongwei | Manufacturer: caihongwei
See On Amazon #18
HighTop Automatic Desoldering Pump Vacuum Solder Sucker Tool Portable AC110V 30W Electric Desoldering Gun Repair Solder Removal Tool Solder Sucker Iron Tin for DIY with 3 Soldering Suction Tips
Asin: B0932TJX9X | Model: BO-IV-solder-20210421-001 | PartNumber: BO-IV-solder-20210421-001
【Heat Up Quickly 】Solder Sucker Power Source 110V 30W With Us Plug Let It Warm Up 5 Minutes , And Press The Side Button For Suction Note :The Item Is Not Full-Automatic, You Need To Use Heating Equipment Together As Assist.
【Easy Operate】Hollow Tip Design Makes Desoldering Through-Hole Components A Breeze.
【Widely Used As You Want】Soldering Sucker Iron Tool Is Widely Used For Welding Circuit Board, Appliance Repair, Home Diy Hobby, Jewelry Welding. You Can Take It Anywhere And You Will Be Able To Find The Tools You Need In The Carry Bag.
【Diy】 It Is A Stand Alone Unit. Simply Plug It In, Let It Warm Up, And Press The Side Button For Suction.
【 Price Is Cheaper And 3 Soldering Suction Tips】Desoldering Suction Pump Is Less Expensive, But It Does Its Job Well Enough.
【 Perfect Desoldering Tool】This Desoldering Tool For Thick-Film Integrated Circuits And Large Components With Big Welding Joints.It Pulls The Solder Right Away Leaving A Clean Solder Pad..
Features
- Strong suction This desoldering pump with Strong suction . hollow tip design makes desoldering through-hole components a breeze .
- Perfect desoldering tool This desoldering tool for thick-film integrated circuits and large components with big welding joints.It pulls the solder right away leaving a clean solder pad.
- Heat up Quickly Solder sucker Power source 110V 30W with US Plug let it warm up 5 minutes , and press the side button for suction Note :The item is not full-automatic, you need to use heating equipment together as assist
- Price is cheaper and 3 Soldering Suction Tips Desoldering suction pump is less expensive, but it does its job well enough
- Widely Used As You Want soldering sucker iron Tool is widely used for welding circuit board, appliance repair, Home DIY hobby, jewelry welding. You can take it anywhere and you will be able to find the tools you need in the carry bag
- DIY it is a stand alone unit. Simply plug it in, let it warm up, and press the side button for suction
- Easy Operate hollow tip design makes desoldering through-hole components a breeze
- See more on Amazon...
Brand: hightop | Manufacturer: HighTop
Dimensions: 2.00 x 10.00 x 3.00 inches | Weight: 1.00 Pounds
See On Amazon #19
MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length
Asin: B08X3DJ86C | Ean: 0014813992056 | UPC: 014813992056
❤ Premium Material - The Braided Desoldering Wicks Are Made Of 100% Copper Wires With Fine Braid Design.Using Flat Stitch Weaving, Fast Heat Conduction, Strong Capillary Action To Pull In Excess Solder..
❤ Applicable Occasions - The No-Clean Desoldering Wicks Are Suitable For Industry Welding, Labs Work Or Home Work.Not Only Improves Work Efficiency, But Also Does Not Damage The Pcb Board..
❤ Solder Braided Wicks - The Solder Wicks With No-Clean Design To Make Sure That Just Little Residues Left Behind And The Residues Are Halide Free, Non-Corrosive And Non-Conductive, Greatly Saving Working Time..
❤ Appropriate Size - The Size Of The Solder Wick Is 2.5Mm X 3M / 0.1Inch X 10 Ft..
Features
- Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random.
- Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft.
- Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.
- Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time.
- Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.
- See more on Amazon...
Brand: MIKIMIQI | Manufacturer: MIKIMIQI
Dimensions: 0.70 x 2.50 x 2.50 inches
See On Amazon
Looking For Something Else?
Search