NICEYRIG Dual Cold Shoe Mount Flash LED Light Microphone Vlog Vlogging Extension Bracket with Shoe Mount 1/4 Thread Applicable for DSLR Camera Mini Tripod Monopod - 432
Asin: B093PWB1LD
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flexible Mounting Ways | Features 1/4 Thread And Shoe Mount, So You Can Directly Attach The Bracket To Dslr Camera, Or To Desktop Tripod, Selfie Stick, Monopod Via The 1/4 Thread.
Made Of Aluminum Alloy, Durable And Last Long.
Securely Design | The Anti-Off Cold Shoe Can Prevent Your Equipment From Accidentally Falling Off. Just Follow The Direction Of White Arrow To Install.
Two Cold Shoe Adapters | Enables You To Attach Two Cold Shoe Accessories Such As Video Light, Mic, Phone Holder On Both Sides Without Interference - 90Mm Enough Center Distance.
Features
- EASY VLOG VLOGGING SOLUTION | Only 1.3 oz, super lightweight for your camera / smartphone rig
- TWO COLD SHOE ADAPTERS | Enables you to attach two cold shoe accessories such as video light, mic, phone holder on both sides without interference - 90mm enough center distance
- FLEXIBLE MOUNTING WAYS | Features 1/4 thread and shoe mount, so you can directly attach the bracket to DSLR camera, or to desktop tripod, selfie stick, monopod via the 1/4 thread
- SECURELY DESIGN | The anti-off cold shoe can prevent your equipment from accidentally falling off. Just follow the direction of white arrow to install
- Made of aluminum alloy, durable and last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon Similar To NICEYRIG Dual Cold Shoe Mount
#1
NICEYRIG Hot Shoe Mount Adapter for GoPro Hero 10/9/8/7/6/5, DJI Osmo Action, AKASO Brave 8/7/6 Applicable for Tripod Selfie Stick Monopod and DSLR Camera - 434
Asin: B08ZJ2RCLF | Ean: 0789219283885 | UPC: 789219283885
[ Swivel And Tilt Function ] 360 Degree Swivel And 180 Degree Tilt With Free-Stop In Any Position To Get Perfect Shooting Angle.
[ Made Of Aluminum Alloy ] The Holder Mount Is A Solid Piece Of Metal That Is Well Machined And Highly Anodized.
Please Note ▶On Some Equipment Like Housing Case For Gopro, If It Is A Bit Tight To Install, You Could Align The Mounting Parts And Then Put Some Force Into. Highly Recommed With A Tip Screwdriver To Make Subtle Adjustment Between The Mounting Fingers..
[ Anti-Twist And Anti-Scratch ] Rubbers Padding On The Contacting Points, It Increases The Friction And Protects Your Equipment From Scratching. Tighten Quickly With A Knurled Thumbscrew.
[ 1/4 & Shoe Mount Connection ] Allows To Mount On A Desktop Tripod, Selfie Stick, Light Stand , Monopod With A Standard 1/4''-20 Threaded Hole On The Bottom, Or Directly Attach To The Camera Via Hotshoe. Very Versatile.
Features
- [ HIGH COMPABILITY ] Exclusively design for GoPro HERO 10/9/8/7/6/5, DJI Osmo Action, AKASO Brave Series and any other action cameras with the same mounting system
- [ 1/4 & SHOE MOUNT CONNECTION ] Allows to mount on a desktop tripod, selfie stick, light stand , monopod with a standard 1/4''-20 threaded hole on the bottom, or directly attach to the camera via hotshoe. Very versatile
- [ SWIVEL AND TILT FUNCTION ] 360 degree swivel and 180 degree tilt with Free-Stop in any position to get perfect shooting angle
- [ ANTI-TWIST AND ANTI-SCRATCH ] Rubbers padding on the contacting points, it increases the friction and protects your equipment from scratching. Tighten quickly with a knurled thumbscrew
- [ MADE OF ALUMINUM ALLOY ] The holder mount is a solid piece of metal that is well machined and highly anodized
- PLEASE NOTE On some equipment like housing case for GoPro, if it is a bit tight to install, you could align the mounting parts and then put some force into. Highly recommed with a tip screwdriver to make subtle adjustment between the mounting fingers.
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.10 pounds
See On Amazon #2
NICEYRIG Aluminum Tripod Mount for iPad Pro 12.9'' 11''/Air 10.9'' 10.5''/Mini 8.3'' 7.9'' Video Recording Vlog Vlogging Lives, Professional Tablet Holder with QR Plate for Arca-Swiss - 502
Asin: B09T5QZXL2
Multiple Mounting Options | Features Dual Cold Shoe Extension Bar On The Top To Add Video Light, Mic; And Abundant Locating Holes - 1/4, 3/8 & Arri On The Back Side For Rich Rig Possibilities.
Quick Release Bottom Plate | With A Built-In Arca-Swiss Quick Release System, The Tablet Mount Allows A Fast Installation On Tripod, Or To Connect Merely Via 1/4 Thread.
Aluminum Alloy Preminum Material | Made Of All Metal Of The Main Structure, And Owing To Hollow-Out Design On The Back Side, The Tripod Mount Is Stylish, Yet Lightweight.
Anti-Twist Function | Angled Silicone Padding On The Clamp Is To Prevent The Tablet From Being Twisted & Scratched. Secure With A Thumbscrew And You Can Choose To Tighten Via A Spanner (Not Included) If Necessary.
130Mm - 250Mm Adjustable Mounting Clamp | Compatible With Most-Size Tablets, Easy To Adjust An Appropriate Height While Adopting Drawer-Type Instead Spring Structural Design, And Avoid Over Tension Putting On Your Tablet.
Features
- IPAD PROFESSIONAL TRIPOD HOLDER | Exclusively designed for iPad and other tablets vlog vlogging, Tik Tok, livestream, video meeting, online class or just used as a camera monitor
- 130MM - 250MM ADJUSTABLE MOUNTING CLAMP | Compatible with most-size tablets, easy to adjust an appropriate height while adopting drawer-type instead spring structural design, and avoid over tension putting on your tablet
- MULTIPLE MOUNTING OPTIONS | Features dual cold shoe extension bar on the top to add video light, mic; and abundant locating holes - 1/4, 3/8 & ARRI on the back side for rich rig possibilities
- ANTI-TWIST FUNCTION | Angled silicone padding on the clamp is to prevent the tablet from being Twisted & Scratched. Secure with a thumbscrew and you can choose to tighten via a spanner (not included) if necessary
- QUICK RELEASE BOTTOM PLATE | With a built-in Arca-Swiss quick release system, the tablet mount allows a fast installation on tripod, or to connect merely via 1/4 thread
- ALUMINUM ALLOY PREMINUM MATERIAL | Made of all metal of the main structure, and owing to Hollow-Out Design on the back side, the tripod mount is stylish, yet lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.50 Pounds
See On Amazon #3
NICEYRIG Side Handle Grip for DJI RS3 / RS3 Pro / RS2 / RSC2, Gimbal Stablilizer Support Leather Handgrip with Extension Arm - 523
Asin: B0BB25H676
[ Sufficient Mounting Points ] Features Nato Rail With Multiple 1/4'' & 3/8'' And Arri Threaded Holes On The Extension Arm, Besides, Comes With A Cold Shoe Mount On The Top Of The Handle For Accessories And Attachments Such As Monitor, Microphone, Flash Light, Magic Arm, Etc..
[ Recommend Options ] Optional Two Units For Dual Handheld Video Shooting.
[ Solid And Lightweight ] Aluminum Alloy Main Structure With Leather Grip, Comfortable To Hand Hold And Make Low-Position Video.
Features
- [ HIGH COMPATIBILITY ] Dedicated for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, fast to install and remove
- [ SOLID AND LIGHTWEIGHT ] Aluminum alloy main structure with leather grip, comfortable to hand hold and make low-position video
- [ SUFFICIENT MOUNTING POINTS ] Features NATO rail with multiple 1/4'' & 3/8'' and ARRI threaded holes on the extension arm, besides, comes with a cold shoe mount on the top of the handle for accessories and attachments such as monitor, microphone, flash light, magic arm, etc.
- [ RECOMMEND OPTIONS ] Optional two units for dual handheld video shooting
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.47 Pounds
See On Amazon #4
NICEYRIG 15mm Single Rod Clamp to Cold Shoe Adapter, DSLR Camera Rig Rail Block for Monitor Mount LED Light Microphone - 426
Asin: B08XNQRVJD | Ean: 0789219283632 | UPC: 789219283632
Tighten Via A M5 Wingnut, Easy To Operate.
Made Of Aluminium Alloy, Max. Payload 1.1Lb.
The Single Rod Clamp Features A Cold Shoe Mount Base, So You Can Directly Attach Accessories Like Microphone, Monitor Mount, Phone Holder, Transmitter, Etc..
Features
- Compatible with standard 15mm rod rail support system
- The single rod clamp features a cold shoe mount base, so you can directly attach accessories like microphone, monitor mount, phone holder, transmitter, etc.
- Tighten via a M5 wingnut, easy to operate
- Made of aluminium alloy, max. payload 1.1lb
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #5
NICEYRIG 3-Side Triple Cold Shoe Extension Bracket Heavy-Duty Cheese Bar with 1/4 Threads for Tripod Selfie Stick Gimbal, Camera Phone Vlog Vlogging Light Mic Mount - 468
Asin: B09FXBPS71
[180 Degree Tilt Shoe Mount] Comes With 3 Cold Shoe Mounts And Arri Locating Holes To Satisfy With Your Shooting Needs. You Can Add Various Accessories And Attachments E.G. Microphone, Led Light, Phone Holder, Power Bank... And Adjust Any Angle!.
[Sturdy & Lightweight] Made Of Quality Aluminum Alloy, Duable To Last Long.
[Ultra Thick And Cheese Design Arm] The Extension Arm Is Threaded Over With Lots Of 1/4'' Holes. With 115Mm Long And 8Mm Thickness, It Is Very Solid..
[High Compatibility] Secure Via A 1/4'' Screw On Tripod, Selfie Stick, Monopod, Gimbal Stabilizer Like Zhiyun Weebill S/Lab, Dji Osmo Mobile 3/4.
Features
- [PRATICAL VLOG VLOGGING SOLUTION] The bracket is suitable for vlogging, stream video and sports photography with rich rig points and enough room.
- [HIGH COMPATIBILITY] Secure via a 1/4'' screw on tripod, selfie stick, monopod, gimbal stabilizer like Zhiyun Weebill S/Lab, DJI Osmo Mobile 3/4
- [180 DEGREE TILT SHOE MOUNT] Comes with 3 cold shoe mountS and ARRI locating holes to satisfy with your shooting needs. You can add various accessories and attachments e.g. microphone, LED light, phone holder, power bank... and adjust any angle!
- [ULTRA THICK AND CHEESE DESIGN ARM] The extension arm is threaded over with lots of 1/4'' holes. With 115mm long and 8mm thickness, it is very solid.
- [STURDY & LIGHTWEIGHT] Made of quality aluminum alloy, duable to last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.20 Pounds
See On Amazon #6
NICEYRIG Compact Cage for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III with NATO Rail Double Cold Shoe - 497
Asin: B09P7ZM9VH
Also Features Nato Rail With Threads On The Left Side, Compatible Niceyrig Side Handle 462/268; Cheese Right Side With Friendly Round Edge, Comfortable Handheld..
Intergrated With Arca Swiss Qr Plate, Quickly Attach And Detach On Arca Tripod. A Screwdriver Is Absorbed Underneath For Easy Installation.
Anti-Twist With Two Little Blocks And Rubber Pads. Secure Tightly Via A 1/4''-20 Screw..
Features Nato Rail With Arri & 1/4'' Threads On The Top, Available For Kinds Of Top Handle Like Niceyrig 450/452/393 Or Monitor Mount. Additionally, Built-In Two Cold Shoe Mounts At Each End For Flash, Microphone, Wireless Receiver..
Features
- Dedicated for A7R V/A7 IV/A7SIII, the cage protects your camera as well as provides abundant mounting points for rigging. Won't obstruct the camera original QD hole and ports.
- Features NATO rail with ARRI & 1/4'' threads on the top, available for kinds of top handle like Niceyrig 450/452/393 or monitor mount. Additionally, built-in two cold shoe mounts at each end for flash, microphone, wireless receiver.
- Also features NATO rail with threads on the left side, compatible Niceyrig Side Handle 462/268; cheese right side with friendly round edge, comfortable handheld.
- Anti-twist with two little blocks and rubber pads. Secure tightly via a 1/4''-20 screw.
- Intergrated with ARCA Swiss QR plate, quickly attach and detach on ARCA tripod. A screwdriver is absorbed underneath for easy installation
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.33 pounds
See On Amazon #7
NICEYRIG Cold Shoe Mount Adapter with 1/4 Mounting Screw for Microphone Flash LED Video Light - 499
Asin: B09T5SVRPB
Tighten Via A Thumbscrew Without Needing Extra Tool.
Constructed From Sturdy Aluminum, Portable And Lightweight.
Works On Camera Cage, Top Handle Grip With Standard 1/4’’ Threaded Hole.
Features
- Enables you easily attach shoe mount accessories such as microphone, wireless transmitter receiver, flash light to your video rig
- Works on camera cage, top handle grip with standard 1/4 threaded hole
- Tighten via a thumbscrew without needing extra tool
- Constructed from sturdy aluminum, portable and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #8
NICEYRIG Cold Shoe Extension Bracket Multi-Functional for DJI RS 3/3 PRO/RS 2/RSC 2/Ronin S/SC, Tripod and Camera Vlog Vlogging Holder Mount - 392
Asin: B08FHQXP16 | Ean: 0789219282970 | UPC: 789219282970
[Multiple Connections] Secure Via 1/4, 3/8 Quick Release Camera Screw. It Could Be Firmly Attached On Your Gimbal Tripod Or Mirrorless Camera.
Made Of Alumunium Alloy With Cheese Plate Design, Sturdy And Lightweight.
[Anti-Scratch] Rubber Cushion On The Bottom Is Helpful To Protect From Scratching And Twist.
[Rich Extension Possibilities] Features An Abundance Of 1/4’’-20, 3/8’’-16 Locating Holes And A Cold Shoe Mount On The Extention Arm To Attach Accessories Such As Microphone, Monitor Mount, Articulating Arm, V Lock Quick Release Plate, Handle, Etc..
Features
- [UNIVERSAL] The extension bracket perfectly fits for DJI Ronin Series via 1/4'' & 3/8'' screws connection, and yet tripod, monopod, DSLR camera.
- [RICH EXTENSION POSSIBILITIES] Features an abundance of 1/4 -20, 3/8 -16 locating holes and a cold shoe mount on the extention arm to attach accessories such as microphone, monitor mount, articulating arm, V lock quick release plate, handle, etc.
- [MULTIPLE CONNECTIONS] Secure via 1/4, 3/8 quick release camera screw. It could be firmly attached on your gimbal tripod or mirrorless camera
- [ANTI-SCRATCH] Rubber cushion on the bottom is helpful to protect from scratching and twist
- Made of alumunium alloy with cheese plate design, sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.18 Pounds
See On Amazon #9
NICEYRIG Tablet Tripod Mount Handheld Video Holder Kit for iPad Mini 7.9/ Air 10.5 10.9/ Pro 11 12.9, Galaxy Tab S8/S7/S6 with 15mm Rod Handle Set, 12 15mm Rod and Rail Block [Aluminum Alloy] - 511
Asin: B0B218NK7S
131Mm - 245Mm Wide Range Mounting Clamp Adopting Drawer-Type Instead Of Spring-Loading System, Is Convenient To Adjust A Desired Height And Secure Via Thumbscrew. Padding Angled-Gel On The Mouth Prevents The Tablet From Twisting And Scratching.
Easy To Assemble, Connecting The Tablet Holder With The Handles Through 15Mm Rail Block And 15Mm Rod. Quickly Switch Between Hand-Held Shooting And Arca Tripod Shooting With Built-In Arca-Swiss Bottom Plate.
15Mm Rod Rail Grip Set With Unsmooth Surface Featuring Lines Increases Friction And Is More Comfortable To Hold. Built-In A 1/4’’-20 Threaded Hole On The End For Your Shoulder Strap Option.
Features Dual Cold Shoe Extension Bar On The Top Of The Tablet Holder For Accessories Like Microphone, Flash Light; Furthermore, Threaded 1/4’’, 3/8’’ & Arri Sufficient Locating Holes Over The Back Side For Diy Operation.
Features
- Dual handheld support kit for vlog vlogging, livestreaming, video record and even Run-and-Gun steady shoot on tablet
- Features dual cold shoe extension bar on the top of the tablet holder for accessories like microphone, flash light; furthermore, threaded 1/4 , 3/8 & ARRI sufficient locating holes over the back side for DIY operation
- 131mm - 245mm wide range mounting clamp adopting drawer-type instead of spring-loading system, is convenient to adjust a desired height and secure via thumbscrew. Padding angled-gel on the mouth prevents the tablet from twisting and scratching
- 15mm rod rail grip set with unsmooth surface featuring lines increases friction and is more comfortable to hold. Built-in a 1/4 -20 threaded hole on the end for your shoulder strap option
- Easy to assemble, connecting the tablet holder with the handles through 15mm rail block and 15mm rod. Quickly switch between hand-held shooting and Arca tripod shooting with built-in ARCA-Swiss bottom plate
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 1.40 pounds
See On Amazon #10
NICEYRIG Cage for Canon EOS R5 / R6 / R6 Mark II and R5 C Mirrorless Cinema Camera, with Double Locking Points - 537
Asin: B0BWYDPCCY
Securely Lock With Two Screws: Not Just Install The Cage With 1/4’’-20 Screws On The Bottom Of The Camera, But A Side Mount Thumbscrew Via Shoulder Strap Slot. Yet, Incorporates An Anti-Twist Design With Locating Pin On The Base To Protect The Camera From Twist.
[ Recommend Product ] Compatible With Niceyrig Hdmi Cable Clamp 479 To Prevent The Hdmi Cable From Pulling Or Accidentally Disconnecting.
Switch Quickly Between Tripod And Gimbal: Integrated With Quick Release Plate For Arca-Swiss Standard On The Base, Very Efficient To Switch Or Set-Up On Arca-Type Tripod, Gimbal. Built-In 3/8’’, 1/4’’ Locating Holes Underneath, So You Can Mount On Any Tripod, Plate.
Rich Rig Possibility: Features Nato Rail With Built-In Arri & 1/4’’ Threaded Holes On The Top Of The Cage To Attach Camera Top Handle Like Niceyrig 393 / 450 For Low-Angle Video Shooting. Moreover, It Comes With 2 Cold Shoe Mounts For Attachments Like Microphone, And Won’T Block Hot Shoe.
Features
- ALUMINUM ALLOY FULL CAGE [NICEYRIG VERSION 2: Form fitting Canon EOS R5C mirrorless cinema camera and R5, R6, R6 IIwhich provides a variety of mounting points for accessory and still maintains access to the camera controls. A basics for cameraman, filmmakers to rig their camera
- RICH RIG POSSIBILITY: Features NATO rail with built-in ARRI & 1/4 threaded holes on the top of the cage to attach camera top handle like Niceyrig 393 / 450 for Low-angle video shooting. Moreover, it comes with 2 cold shoe mounts for attachments like microphone, and won t block hot shoe
- SECURELY LOCK WITH TWO SCREWS: Not just install the cage with 1/4 -20 screws on the bottom of the camera, but a side mount thumbscrew via shoulder strap slot. Yet, incorporates an anti-twist design with locating pin on the base to protect the camera from twist
- SWITCH QUICKLY BETWEEN TRIPOD AND GIMBAL: Integrated with quick release plate for Arca-Swiss standard on the base, very efficient to switch or set-up on Arca-type tripod, gimbal. Built-in 3/8 , 1/4 locating holes underneath, so you can mount on any tripod, plate
- [ RECOMMEND PRODUCT ] Compatible with Niceyrig HDMI Cable Clamp 479 to prevent the HDMI cable from pulling or accidentally disconnecting
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #11
NICEYRIG Shock-Proof Shotgun Microphone Holder with 18.5-35 mm Adjustable Clamp, Microphone LED Flashlight Aluminum Holder for Camera, Cage Rig, Tripod - 549
Asin: B0C4H25TH8 | Model: US-549060532 | PartNumber: US-549060532
Shock And Noise Absorbed Design | Thanks To Soft Silicone Pads In The Microphone Clamp And Sufficient Silicone Dots - Between The Microphone And Clamp Two Parts, Especially Suitable For Run-And-Gun Shooting.
Made Of Aluminum Alloy And Staless Steel | Full Metal, High Quality With Solid Structure, Cnc Machined, The Microphone Holder Is Durable.
Dual Mounting Points | Built-In Cold Shoe Mount On The Bottom, Can Directly Attach To Camera Or Any Accessory With Cold Shoe Interface, E.G. Cage, Shoe Bracket, 15Mm Rod Clamp... Additionally, Comes With 1/4’’ Thread Underneath For Your Diy Operation.
360°Unlimited Rotation & 180°Front-And-Back Tilt | Can Get Any Angle As Per You Need, Very Functional! And No Need Extra Tools, Screws, Quickly To Achieve By Hand.
Features
- ADJUSTABLE RANGE WIDER CLAMP | Compatible with most shotgun microphones in the market, yet flashlights with 18.5mm-35mm (0.73 -1.37 ) diameter. Grasp different size of microphones by adjusting the knob. Recommend max. payload 0.66 lb
- 360 UNLIMITED ROTATION & 180 FRONT-AND-BACK TILT | Can get any angle as per you need, very functional! And no need extra tools, screws, quickly to achieve by hand
- SHOCK AND NOISE ABSORBED DESIGN | Thanks to soft silicone pads in the microphone clamp and sufficient silicone dots - between the microphone and clamp two parts, especially suitable for run-and-gun shooting
- DUAL MOUNTING POINTS | Built-in cold shoe mount on the bottom, can directly attach to camera or any accessory with cold shoe interface, e.g. cage, shoe bracket, 15mm rod clamp... Additionally, comes with 1/4 thread underneath for your DIY operation
- MADE OF ALUMINUM ALLOY AND STALESS STEEL | Full metal, high quality with solid structure, CNC machined, the microphone holder is durable
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Dimensions: 4.72 x 6.69 x 1.18 inches
See On Amazon #12
NICEYRIG Cage for Sony Alpha A6700 Mirrorless Camera, with QD Hole, NATO Rails and Cold Shoe Mounts - 567
Asin: B0CM8KSWDL
[Multiple Mountings] Equipped With An Abundance Of 1/4-20’’ & Arri Locating Holes, Nato Rails And Dual Cold Shoe Mounts For Various Rig Accessories, Such As Magic Arm, Hdmi Cable Clamp, Monitor Mount, Video Light, Mic....
Qr Plate For Arca-Swiss | Can Achieve A Fast Switch Among Handheld, Compatible Tripod And Stabilizer For Arca-Swiss Type. Efficiently Change To Gimbal Shooting Mode On Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro.
[Vertical Handheld Shooting] Allows To Attach A Top Handgrip On The Left Side (Optional Niceyrig Arri Mount Handle 348/536 Or Niceyrig Quick Release Nato Handle 393) To Film In Vertical Shooting Scenerios.
[Double Locking Points] Secured Tightly Via 2 Screws - On The Right Side And Bottom. Yet, Two Pieces Of Rubber Pads Onto The Bottom For Arca-Swiss Are For Anti-Deflection.
Features
- [COMPABILITY] It's especially designed for Sony A6700 Alpha APS-C mirrorless camera, which protects your camera body from damaging and scratching, and offers ennourmous locating holes for videography accessories and attachments
- [DOUBLE LOCKING POINTS] Secured tightly via 2 screws - on the right side and bottom. Yet, two pieces of rubber pads onto the bottom for Arca-Swiss are for anti-deflection
- [MULTIPLE MOUNTINGS] Equipped with an abundance of 1/4-20 & ARRI locating holes, NATO rails and dual cold shoe mounts for various rig accessories, such as magic arm, HDMI cable clamp, monitor mount, video light, mic...
- [VERTICAL HANDHELD SHOOTING] Allows to attach a top handgrip on the left side (optional Niceyrig ARRI Mount Handle 348/536 or Niceyrig Quick Release NATO Handle 393) to film in vertical shooting scenerios
- QR PLATE FOR ARCA-SWISS | Can achieve a fast switch among handheld, compatible tripod and stabilizer for Arca-Swiss type. Efficiently change to gimbal shooting mode on DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.34 Pounds
Warranty: 1 Year
See On Amazon #13
NICEYRIG 15mm Rod Clamp with Cold Shoe Mount Adapter for Camera DSLR Rig Flash Led Light Monitor Video and More
Asin: B071DQPJT6 | Model: NA | PartNumber: NA | Ean: 0655630099001 | UPC: 655630099001
The 15Mm Rail Block Clamp Is For Rod Support Rail System, Follow Focus Support. Fits Standard 15Mm Rods, Strong, Simple, Great Price, Anodized Black Finish..
Materail:Aluminum Alloy.
Package Includes: 1 X Single Rod Clamp 1 X Cold Shoe Base.
This 15Mm Rail Clamp With 5Pcs 1/4" Female Thread Is Widely Used On Standard Dslr/Dv Support Rig To Attach Other Bracket Or Device For Convenient Shoot And Recording..
Features
- [VERSION 2] The Cold Shoe Rod Clamp Adapter provides a cold hot shoe slot, allow you connect the device with hot shoe base, such as video light.
- This 15mm Rail Clamp with 5pcs 1/4 female thread is widely used on standard DSLR/DV Support Rig to attach other bracket or device for convenient shoot and recording.
- The 15mm Rail Block clamp is for rod support rail system, follow focus support. Fits standard 15mm rods, strong, simple, great price, anodized black finish.
- Package Includes: 1 x Single Rod Clamp 1 x cold shoe base
- Materail:Aluminum Alloy
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.15 Pounds
See On Amazon #14
NICEYRIG Cold Shoe Extension Bar, Right Angle Dual Shoe Mounts Bracket with NATO Rail, 1/4'' Threads - 376
Asin: B087TY7G9X | Ean: 0644925431848 | UPC: 644925431848
Counter Bore Slot ∣ 36Mm Long, Secured Tightly With Two 1/4’’-20 Screws On Camera Cage, Top Handle, Tripod..
Super Light ∣ Made Of Almunuim Alloy, Sturdy And Lightweight.
Extension Possibilities ∣ Allowing To Mount Various Camera Accessories. The Cold Shoe Bar Extends Beyond The Cage.
Nato Rail ∣ Built-In A Nato Rail With 45Mm Long, It Enables You To Quickly Attach And Detach Nato Accessories (Like Niceyrig Nato Handle 122 / Niceyrig Monitor Mount 302).
Features
- L TYPE BRACKET It includes two cold shoe bases and 1/4 threaded holes on the top and side. Compatible with microphone, flash light, receivers, magic arm, etc.
- NATO RAIL Built-in a NATO rail with 45mm long, it enables you to quickly attach and detach NATO accessories (like NICEYRIG NATO Handle 122 / NICEYRIG Monitor Mount 302)
- COUNTER BORE SLOT 36mm long, secured tightly with two 1/4 -20 screws on camera cage, top handle, tripod.
- EXTENSION POSSIBILITIES Allowing to mount various camera accessories. The cold shoe bar extends beyond the cage
- SUPER LIGHT Made of almunuim alloy, sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #15
NICEYRIG Hot Shoe Mount Monitor Holder, Swivel and Tilt Function 5 Inch 7 Inch Field Monitor Mount for DSLR Camera Gimbal Stabilizer - 303
Asin: B082XNGV55 | Model: US-303-1 | PartNumber: US-303-1 | Ean: 0644925431640 | UPC: 644925431640
[Thumbscrew Lock] Features A Large Thumbscrew Easily To Lock And Unlock The Dslr Attachment.
[High Quality] Made Of Aluminum Alloy, Sturdy And Lightweight.
[Loosen Or Retighten] Fatory Has Set Damping With Glue, No Need To Adjust. Comes With Allen Hex Drivers, If Necessory, You Can Use The Supplied Tools To Reset While Your Monitor/Light Attaching On This Shoe Mount.
[Angles Adjustable] Allows 160 Degree Tilt And 360 Degree Swivel, Adjust By Hand. Very Convenient For Vloggers, Photographers Or Youtubers In Run-And-Gun Shooting.
Features
- [MULTI-FUNCTION APPLICATION] DSLR monitor mount 303 enables to use on camera or any rig system with a standard cold shoe adapter. Upper with 1/4 screw which can quickly attach to field monitor, LED light, flash, microphone, etc.
- [ANGLES ADJUSTABLE] Allows 160 degree tilt and 360 degree swivel, adjust by hand. Very convenient for vloggers, photographers or YouTubers in Run-and-Gun shooting
- [THUMBSCREW LOCK] Features a large thumbscrew easily to lock and unlock the DSLR attachment
- [LOOSEN OR RETIGHTEN] Fatory has set damping with glue, no need to adjust. Comes with Allen hex drivers, if necessory, you can use the supplied tools to reset while your monitor/light attaching on this shoe mount
- [HIGH QUALITY] Made of aluminum alloy, sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.12 Pounds
See On Amazon #16
NICEYRIG Cold Shoe Extension Bar with Quick Release Plate for Arca-Swiss Dovetail, Vlog Vlogging Microphone LED Light Holder Mount Applicable for DSLR Camera, Mini Tripod - 433
Asin: B093P5K33N
Arca Swiss Quick Release System | Integrated With Arca Type Plate, It Allows Fast Switch Between Tripod Shooting, Handheld Shooting, And Gimbal Shooting.
Portable To Carry | Constructed From Aluminum Alloy, The Extension Bar Is Sturdy And Lightweight.
Securely Lock | Fixed To Any Mini Tripod, Monopod With 1/4 Thread On The Thumbscrew, Tighten Via Spanner If Necessary. Anti-Twist With All-Round Rubber Pads On The Top.
Multiple Mounting Points | Features Abundant 1/4 Threads And Anti-Off Cold Shoe On The Extension Bracket For Accessories, E.G. Flash Light, Microphone, Action Camera, Magic Arm....
Features
- Fits for SLR camera and mirrorless camera, connecting by 1/4 locating hole on the bottom of camera
- MULTIPLE MOUNTING POINTS | Features abundant 1/4 threads and anti-off cold shoe on the extension bracket for accessories, e.g. flash light, microphone, action camera, magic arm...
- ARCA SWISS QUICK RELEASE SYSTEM | Integrated with Arca type plate, it allows fast switch between tripod shooting, handheld shooting, and gimbal shooting
- SECURELY LOCK | Fixed to any mini tripod, monopod with 1/4 thread on the thumbscrew, tighten via spanner if necessary. Anti-twist with all-round rubber pads on the top
- PORTABLE TO CARRY | Constructed from aluminum alloy, the extension bar is sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.09 pounds
See On Amazon #17
NICEYRIG 15mm Rod Clamp with Locating Holes for ARRI & 1/4 , Dual 15mm Rod Rail Extension Applicable for DSLR Top Handle Articulating Magic Friction Arm - 568
Asin: B0CPLFR9KD
Rig Possibility: Allows To Attach Various Accessories On The Clamp, Such As Camera Top Grip, Cheese Bar, Cold Shoe Adapter, Magic Arm, Etc..
Full Metal, Solid Construction: Made Of Aluminum Alloy, It Is Sturdy And Lightweight.
Easy To Lock Or Release: Adjusted By The Wingnut Screw On Each End Of The Rod Clamp.
Abundant Mounting Points: Features Arri Locating Hole Each On The Top And Bottom Of The 15Mm Rod Clamp, And Multiple 1/4’’ Locating Holes Through Front And Back Sides.
Features
- PURPOSE: Designed for dual 15mm rod rail extension, Max. Payload 22lb
- ABUNDANT MOUNTING POINTS: Features ARRI locating hole each on the top and bottom of the 15mm rod clamp, and multiple 1/4 locating holes through front and back sides
- RIG POSSIBILITY: Allows to attach various accessories on the clamp, such as camera top grip, cheese bar, cold shoe adapter, magic arm, etc.
- EASY TO LOCK OR RELEASE: Adjusted by the wingnut screw on each end of the rod clamp
- FULL METAL, SOLID CONSTRUCTION: Made of aluminum alloy, it is sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.14 Pounds
Warranty: 1 Y
See On Amazon #18
NICEYRIG 3-Side Cold Shoe Mount 360 Degree Swivel with Triple Anti-Off Shoe Adapters, 1/4 Threads for Microphone, Flash Light, Monitor Mount Camera Phone Vlog Vlogging - 328
Asin: B07X1VN7MW | Model: US-328 | PartNumber: US-328 | Ean: 0644925431138 | UPC: 644925431138
Features Cold Shoe Adapter On Top, Plus Left & Right Sides To Support Total Three Shoe Attachments Applicable For Sony, Canon, Nikon Universal Camera Or Cage Rig.
Durable Aluminum Alloy Construction, Updated Version.
Specially Offer Multiple 1/4’’ Thread Holes As Another Mounting Ways For Your Convenience.
360 Degree Horizontal Rotation For Adjusting The Cold Shoe’S Direction, Still Quickly Locked Via A Knurling Knob.
Features
- Niceyrig Triple Shoe Mount 328 allow you to attach microphone, flash, LED light, handle and any other accessories via the built-in cold shoe adapters or 1/4 threaded holes !
- 360 degree horizontal rotation for adjusting the cold shoe s direction, still quickly locked via a knurling knob
- Features cold shoe adapter on top, plus left & right sides to support total three shoe attachments applicable for Sony, Canon, Nikon universal camera or cage rig
- Specially offer multiple 1/4 thread holes as another mounting ways for your convenience
- Durable aluminum alloy construction, updated version
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.09 Pounds
See On Amazon #19
NICEYRIG Cage Kit with Wooden Grip for Sony Alpha A6100 A6400 Mirrorless Camera, with Double Locking Points - 342
Asin: B087JNYF4C | Ean: 0644925431763 | UPC: 644925431763
[Second Locking Point] Secured Tightly Via 2 Screws On The Right Side And Bottom. The Bottom Of The Cage Is An Arca Swiss Base Plate, Quick Attach And Detach On Your Tripod. Besides, There Are Many 1/4’’-20 Threaded Holes To Mount Other Quick Release Tripod Plate For Further Options..
[Qr Plate For Arca-Swiss] Can Achieve A Quick Switch Among Handheld, Compatible Tripod And Stabilizer For Arca-Type. Efficiently Change To Gimbal Shooting Mode On Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro.
[Strong Constructure] The Front Of The Cage With Two Stiffeners Is Anti-Twist Designed, Yet Helps To Dissipate Heat. Constructed From Lightweight And Durable Aluminum Alloy, The Cage Is Bulit To Last Long.
[Wooden Grip] Ergonomically Designed, The Handle Gives You Much Convenience When Handheld Shooting. Made Of Natural Rosewood, It Absorbs Sweat, Also Won’T Slip Out Of Your Grasp.
[Multiple Mountings] Features Two Cold Shoes, Nato Rail, 3/8’’ Arri And An Abundance Of 1/4’’ Locating Holes On The Top Of Camera Cage, So It Enables You To Mount Different Top Handle (Like Nato Handle 273, 1/4’’ Screw Top Handle, Arri Handle 348), Plus Other Accessories, Such As Microphone, Flash Led, Etc..
Features
- [VERSION 3] Niceyrig Sony A6100 /6400 cage kit 342 could protect the camera body from damaging, while offer a variety of mounting options to attach accessories attachments. With this cage, SD card slot, battery compartment and all camera controls are still accessed
- [MULTIPLE MOUNTINGS] Features two cold shoes, NATO rail, 3/8 ARRI and an abundance of 1/4 locating holes on the top of camera cage, so it enables you to mount different top handle (like NATO Handle 273, 1/4 Screw Top Handle, ARRI Handle 348), plus other accessories, such as microphone, flash LED, etc.
- [SECOND LOCKING POINT] Secured tightly via 2 screws on the right side and bottom. The bottom of the cage is an Arca Swiss base plate, quick attach and detach on your tripod. Besides, there are many 1/4 -20 threaded holes to mount other quick release tripod plate for further options.
- [WOODEN GRIP] Ergonomically designed, the handle gives you much convenience when handheld shooting. Made of natural rosewood, it absorbs sweat, also won t slip out of your grasp
- [QR PLATE FOR ARCA-SWISS] Can achieve a quick switch among handheld, compatible tripod and stabilizer for Arca-type. Efficiently change to gimbal shooting mode on DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro
- [STRONG CONSTRUCTURE] The front of the cage with two stiffeners is anti-twist designed, yet helps to dissipate heat. Constructed from lightweight and durable aluminum alloy, the cage is bulit to last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.42 pounds
See On Amazon
Looking For Something Else?
Search