NICEYRIG Cold Shoe Mount Adapter with 1/4 Mounting Screw for Microphone Flash LED Video Light - 499
Asin: B09T5SVRPB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Tighten Via A Thumbscrew Without Needing Extra Tool.
Constructed From Sturdy Aluminum, Portable And Lightweight.
Works On Camera Cage, Top Handle Grip With Standard 1/4’’ Threaded Hole.
Features
- Enables you easily attach shoe mount accessories such as microphone, wireless transmitter receiver, flash light to your video rig
- Works on camera cage, top handle grip with standard 1/4 threaded hole
- Tighten via a thumbscrew without needing extra tool
- Constructed from sturdy aluminum, portable and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon Similar To NICEYRIG Cold Shoe Mount Adapter
#1
NICEYRIG Hot Shoe Mount Adapter for GoPro Hero 10/9/8/7/6/5, DJI Osmo Action, AKASO Brave 8/7/6 Applicable for Tripod Selfie Stick Monopod and DSLR Camera - 434
Asin: B08ZJ2RCLF | Ean: 0789219283885 | UPC: 789219283885
[ Swivel And Tilt Function ] 360 Degree Swivel And 180 Degree Tilt With Free-Stop In Any Position To Get Perfect Shooting Angle.
[ Made Of Aluminum Alloy ] The Holder Mount Is A Solid Piece Of Metal That Is Well Machined And Highly Anodized.
Please Note ▶On Some Equipment Like Housing Case For Gopro, If It Is A Bit Tight To Install, You Could Align The Mounting Parts And Then Put Some Force Into. Highly Recommed With A Tip Screwdriver To Make Subtle Adjustment Between The Mounting Fingers..
[ Anti-Twist And Anti-Scratch ] Rubbers Padding On The Contacting Points, It Increases The Friction And Protects Your Equipment From Scratching. Tighten Quickly With A Knurled Thumbscrew.
[ 1/4 & Shoe Mount Connection ] Allows To Mount On A Desktop Tripod, Selfie Stick, Light Stand , Monopod With A Standard 1/4''-20 Threaded Hole On The Bottom, Or Directly Attach To The Camera Via Hotshoe. Very Versatile.
Features
- [ HIGH COMPABILITY ] Exclusively design for GoPro HERO 10/9/8/7/6/5, DJI Osmo Action, AKASO Brave Series and any other action cameras with the same mounting system
- [ 1/4 & SHOE MOUNT CONNECTION ] Allows to mount on a desktop tripod, selfie stick, light stand , monopod with a standard 1/4''-20 threaded hole on the bottom, or directly attach to the camera via hotshoe. Very versatile
- [ SWIVEL AND TILT FUNCTION ] 360 degree swivel and 180 degree tilt with Free-Stop in any position to get perfect shooting angle
- [ ANTI-TWIST AND ANTI-SCRATCH ] Rubbers padding on the contacting points, it increases the friction and protects your equipment from scratching. Tighten quickly with a knurled thumbscrew
- [ MADE OF ALUMINUM ALLOY ] The holder mount is a solid piece of metal that is well machined and highly anodized
- PLEASE NOTE On some equipment like housing case for GoPro, if it is a bit tight to install, you could align the mounting parts and then put some force into. Highly recommed with a tip screwdriver to make subtle adjustment between the mounting fingers.
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.10 pounds
See On Amazon #2
NICEYRIG Vlog Selfie Mirror Camera/Phone TikTok Twitch YouTube Live Cold Shoe Mount 360 Flip Screen Mirror Applicable for iPhone 14/13/12/11/XS SE, Fujifilm, Panasonic, Sony - 377
Asin: B08CN7NKND | Ean: 0789219282727 | UPC: 789219282727
Flexible, Cheese Extension Arms | Total 40-Mm-Long On Both Sides, The Extension Arms With Built-In Joints, Allows To Make Further Adjustment In Height Of The Mirror. Besides, Features Multiple 1/4''-20 Loacting Holes On Each Arm For Rigging, E.G. To Attach Video Accessory Like Cold Shoe Adapter For Microphone, Led Light, Etc..
Full Metal Structure | Made Of Aluminum Alloy, The Selfie Mirror Mount Is Super Solid And Durable. Easy To Carry While Folding, Would Not Scratch The Mirror With Built-In Rubber Gaskets.
Kindly Note: Needs An Extra Phone Holder With Cold Shoe Mount For Smartphone Setup, Optional Niceyrig Tripod Mount Phone Holder 515.
Highly Compatibility | Could Directly Mount On Any Camera, E.G. Fujifilm Xt3 Xt20, Panasonic Lumix G85 G95, Sony A6000 A6300 A7sii A7iii Via Hot Shoe Interface Or Smartphone Via A Tripod Mount Holder (Optical Niceyrig 515).
360° Flip Screen Mirror | Allows To Up-And-Down 360 Degree Adjust The Selfie Mirror As To Get A Perfect Viewing Angle.
Features
- A PRATICAL SOLUTION FOR VLOG VLOGGING, LIVESTREAM, RECORD YOURSELF, SELFIE SHOTS WITH YOUR PHONE REAR-FACING CAMERA, OR A DSLR CAMRERA THAT WITHOUT A FLIP SCREEN
- 360 FLIP SCREEN MIRROR | Allows to up-and-down 360 degree adjust the selfie mirror as to get a perfect viewing angle
- FLEXIBLE, CHEESE EXTENSION ARMS | Total 40-mm-long on both sides, the extension arms with built-in joints, allows to make further adjustment in height of the mirror. Besides, features multiple 1/4''-20 loacting holes on each arm for rigging, e.g. to attach video accessory like cold shoe adapter for microphone, LED light, etc.
- HIGHLY COMPATIBILITY | Could directly mount on any camera, e.g. Fujifilm XT3 XT20, Panasonic Lumix G85 G95, Sony A6000 A6300 A7SII A7III via hot shoe interface or smartphone via a tripod mount holder (Optical NICEYRIG 515)
- FULL METAL STRUCTURE | Made of aluminum alloy, the selfie mirror mount is super solid and durable. Easy to carry while folding, would not scratch the mirror with built-in rubber gaskets
- KINDLY NOTE: Needs an extra phone holder with cold shoe mount for smartphone setup, optional Niceyrig Tripod Mount Phone Holder 515
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: Niceyrig
Weight: 0.18 Pounds
See On Amazon #3
NICEYRIG Aluminum Tripod Mount for iPad Pro 12.9'' 11''/Air 10.9'' 10.5''/Mini 8.3'' 7.9'' Video Recording Vlog Vlogging Lives, Professional Tablet Holder with QR Plate for Arca-Swiss - 502
Asin: B09T5QZXL2
Multiple Mounting Options | Features Dual Cold Shoe Extension Bar On The Top To Add Video Light, Mic; And Abundant Locating Holes - 1/4, 3/8 & Arri On The Back Side For Rich Rig Possibilities.
Quick Release Bottom Plate | With A Built-In Arca-Swiss Quick Release System, The Tablet Mount Allows A Fast Installation On Tripod, Or To Connect Merely Via 1/4 Thread.
Aluminum Alloy Preminum Material | Made Of All Metal Of The Main Structure, And Owing To Hollow-Out Design On The Back Side, The Tripod Mount Is Stylish, Yet Lightweight.
Anti-Twist Function | Angled Silicone Padding On The Clamp Is To Prevent The Tablet From Being Twisted & Scratched. Secure With A Thumbscrew And You Can Choose To Tighten Via A Spanner (Not Included) If Necessary.
130Mm - 250Mm Adjustable Mounting Clamp | Compatible With Most-Size Tablets, Easy To Adjust An Appropriate Height While Adopting Drawer-Type Instead Spring Structural Design, And Avoid Over Tension Putting On Your Tablet.
Features
- IPAD PROFESSIONAL TRIPOD HOLDER | Exclusively designed for iPad and other tablets vlog vlogging, Tik Tok, livestream, video meeting, online class or just used as a camera monitor
- 130MM - 250MM ADJUSTABLE MOUNTING CLAMP | Compatible with most-size tablets, easy to adjust an appropriate height while adopting drawer-type instead spring structural design, and avoid over tension putting on your tablet
- MULTIPLE MOUNTING OPTIONS | Features dual cold shoe extension bar on the top to add video light, mic; and abundant locating holes - 1/4, 3/8 & ARRI on the back side for rich rig possibilities
- ANTI-TWIST FUNCTION | Angled silicone padding on the clamp is to prevent the tablet from being Twisted & Scratched. Secure with a thumbscrew and you can choose to tighten via a spanner (not included) if necessary
- QUICK RELEASE BOTTOM PLATE | With a built-in Arca-Swiss quick release system, the tablet mount allows a fast installation on tripod, or to connect merely via 1/4 thread
- ALUMINUM ALLOY PREMINUM MATERIAL | Made of all metal of the main structure, and owing to Hollow-Out Design on the back side, the tripod mount is stylish, yet lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.50 Pounds
See On Amazon #4
NICEYRIG Dual Cold Shoe Mount Flash LED Light Microphone Vlog Vlogging Extension Bracket with Shoe Mount 1/4 Thread Applicable for DSLR Camera Mini Tripod Monopod - 432
Asin: B093PWB1LD
Flexible Mounting Ways | Features 1/4 Thread And Shoe Mount, So You Can Directly Attach The Bracket To Dslr Camera, Or To Desktop Tripod, Selfie Stick, Monopod Via The 1/4 Thread.
Made Of Aluminum Alloy, Durable And Last Long.
Securely Design | The Anti-Off Cold Shoe Can Prevent Your Equipment From Accidentally Falling Off. Just Follow The Direction Of White Arrow To Install.
Two Cold Shoe Adapters | Enables You To Attach Two Cold Shoe Accessories Such As Video Light, Mic, Phone Holder On Both Sides Without Interference - 90Mm Enough Center Distance.
Features
- EASY VLOG VLOGGING SOLUTION | Only 1.3 oz, super lightweight for your camera / smartphone rig
- TWO COLD SHOE ADAPTERS | Enables you to attach two cold shoe accessories such as video light, mic, phone holder on both sides without interference - 90mm enough center distance
- FLEXIBLE MOUNTING WAYS | Features 1/4 thread and shoe mount, so you can directly attach the bracket to DSLR camera, or to desktop tripod, selfie stick, monopod via the 1/4 thread
- SECURELY DESIGN | The anti-off cold shoe can prevent your equipment from accidentally falling off. Just follow the direction of white arrow to install
- Made of aluminum alloy, durable and last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #5
NICEYRIG Pro Selfie Mirror Mount Vlog Vlogging for iPhone and Android Cell Phone 6.7'' 6.5'' 6.1'', 360 Flip Screen Mirror for YouTube Live Video Recording Blogging [Silver Version] - 556
Asin: B0CCXMHGHT
Filming In Both Positions | Allows To Take Selfie Shots Horizontally, And Yet Vertically With A Decent Reflection Display.
Full Metal Structure, Built To Last Long | Made Of Aluminum Alloy And Acrylic, The Selfie Mirror Mount Is Sturdy And Durable. Comes With A Pouch, Easy To Carry.
Recommended Product | Optional Niceyrig Tripod Mount Holder 515 For Smartphone Set-Up.
Rig Possibility | Features Multiple 1/4’’-20 Threaded Holes On The Side Arms To Accessorise The Phone Such As Attach Cold Shoe Adapter For Mic, Wireless Rod, Flash Light, Etc..
Easy To Get A Perfect Viewing Angle | 360°Unlimited Flip Mirror And 56Mm-Long Adjustable Extension Arms On Each Side Achieving Through The Flexible Joints.
Features
- PRO VERSION SELFIE MIRROR MOUNT | Specially designed for big size smartphone such as iPhone 14, 13, 12, 11, XS Pro Max 6.7 (also works on 6.1 ) and Android phone 6.5'' 6.8'' to record self, and creation content for social platforms via the better back camera
- EASY TO GET A PERFECT VIEWING ANGLE | 360 unlimited flip mirror and 56mm-long adjustable extension arms on each side achieving through the flexible joints
- FILMING IN BOTH POSITIONS | Allows to take selfie shots horizontally, and yet vertically with a decent reflection display
- RIG POSSIBILITY | Features multiple 1/4 -20 threaded holes on the side arms to accessorise the phone such as attach cold shoe adapter for mic, wireless rod, flash light, etc.
- FULL METAL STRUCTURE, BUILT TO LAST LONG | Made of aluminum alloy and acrylic, the selfie mirror mount is sturdy and durable. Comes with a pouch, easy to carry
- Recommended Product | Optional Niceyrig Tripod Mount Holder 515 for smartphone set-up
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: Niceyrig
Weight: 0.24 pounds
Warranty: 1 year
See On Amazon #6
NICEYRIG Aluminum Power Bank Clamp for DJI RS 2 / RS 3 / RS 3 Pro, 50mm - 88mm Wide Range Universal Portable Charger Holder with Detachable Cold Shoe Mount for DSLR Camera, Gimbal System - 540
Asin: B0BX28FC3X
50 Mm (1.96’’) - 88 Mm (3.56’’) Wide Clamp | Adjustable Clamp, With Up To 25 Mm (1’’) Depth, It Accomodates To Powerbanks Like Anker, Romoss, Miady And Other Brands In The Market, And Yet Mobile Phone, Led Light, Etc. Securely Lock Through Spring-Loaded Mechanism.
Pplease Note ◀ If You Need To Attach The Cold Shoe Mount On The Back Side Of The Holder, Firstly Remove The Gimbal Fast-Assembling Part By Phillips Screwdriver.
Multiple Mounting Points | Rig Possibility With 1/4’’-20 Threaded Holes E.G. Adding Supper Clamp Ballhead Magic Arm To The Holder, Cold Shoe Adapter For Microphone.
Constructed From Aluminum Alloy | Sturdy And Durable Material, Build To Last Long.
Shock-Proof, Non-Slip Function | Comes With Thick Rubber Cushions On Each Side Of The Inner Clamp With Matte Surface Increasing Friction And Also Provides Your Device All-Around Protection.
Detachable Cold Shoe Mount | Equipped With Counterbores On The Bottom, Back Side Of The Clamp, Very Flexible To Install The Shoe Mount Horizontally & Vertically. Versatile For Dslr Camera, Camera Cage Rig, Tripod.
Features
- GIMBAL QUICK SET-UP | Allows to directly attach to DJI RS2, RS3 or RS3 Pro just in seconds with built-in fast-assembling part of the power bank holder, no need additional accessory! No need to worry of running out of power!
- DETACHABLE COLD SHOE MOUNT | Equipped with counterbores on the bottom, back side of the clamp, very flexible to install the shoe mount horizontally & vertically. Versatile for DSLR camera, camera cage rig, tripod
- 50 MM (1.96 ) - 88 MM (3.56 ) WIDE CLAMP | Adjustable clamp, with up to 25 mm (1 ) depth, it accomodates to powerbanks like Anker, ROMOSS, Miady and other brands in the market, and yet mobile phone, LED light, etc. Securely lock through spring-loaded mechanism
- SHOCK-PROOF, NON-SLIP FUNCTION | Comes with thick rubber cushions on each side of the inner clamp with matte surface increasing friction and also provides your device all-around protection
- MULTIPLE MOUNTING POINTS | Rig possibility with 1/4 -20 threaded holes e.g. adding supper clamp ballhead magic arm to the holder, cold shoe adapter for microphone
- CONSTRUCTED FROM ALUMINUM ALLOY | Sturdy and durable material, build to last long
- PPLEASE NOTE If you need to attach the cold shoe mount on the back side of the holder, firstly remove the gimbal fast-assembling part by Phillips screwdriver
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.17 Pounds
See On Amazon #7
NICEYRIG Multifunctional Camera Cheese Easy Plate with Cold Shoe Mount for Railblocks, Dovetails and Short Rods
Asin: B078J6SDCR | Model: NA | PartNumber: NA | Ean: 0685646751976 | UPC: 685646751976
It Works As A Switching Plate When Mounted To The Bottom Of A Dslr Cage..
Package Includes: 1X Easy Plate, 1X Cold Shoe Mount, 3X 1/4" Screw, 1X 1/4" Tripod Screw, 1X Hex Spanner.
The Flexible Cold Hot Shoe Mount Adapter Can Attach To Any 1/4"-20 Threaded Hole For Flash Light,Camera Monitor, Microphone Etc..
It Could Be Attached On Railblocks, Dovetails And Short Rods..
Features
- This easy plate is equipped with various threaded holes( 1/4" 3/8" M3 M4) in 9mm spacing.
- It could be attached on railblocks, dovetails and short rods.
- It works as a switching plate when mounted to the bottom of a dslr cage.
- The flexible cold hot shoe mount adapter can attach to any 1/4-20 threaded hole for Flash light,Camera Monitor, Microphone etc.
- Package Includes: 1x easy plate, 1x cold shoe mount, 3x 1/4 screw, 1x 1/4 tripod screw, 1x hex spanner
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.22 pounds
See On Amazon #8
NICEYRIG 15mm Single Rod Clamp to Cold Shoe Adapter, DSLR Camera Rig Rail Block for Monitor Mount LED Light Microphone - 426
Asin: B08XNQRVJD | Ean: 0789219283632 | UPC: 789219283632
Tighten Via A M5 Wingnut, Easy To Operate.
Made Of Aluminium Alloy, Max. Payload 1.1Lb.
The Single Rod Clamp Features A Cold Shoe Mount Base, So You Can Directly Attach Accessories Like Microphone, Monitor Mount, Phone Holder, Transmitter, Etc..
Features
- Compatible with standard 15mm rod rail support system
- The single rod clamp features a cold shoe mount base, so you can directly attach accessories like microphone, monitor mount, phone holder, transmitter, etc.
- Tighten via a M5 wingnut, easy to operate
- Made of aluminium alloy, max. payload 1.1lb
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #9
NICEYRIG Quick Release NATO Lock Clamp with 1/4'' 3/8'' Thread for NATO Rail Ball Head Friction Arm- 024
Asin: B08RJ3KPP2 | Ean: 0789219283472 | UPC: 789219283472
Features 1/4"-20 And 3/8"-16 Locating Holes On The Top, Allows To Mount Ballhead, Friction Arm, Cold Shoe Adapter, Etc..
Constructed From Aluminum Alloy, The Mini Nato Clamp Is Sturdy And Lightweight.
The Nato Clamp Is Pre-Adjusted To Accomodate To The 20.5Mm Width Nato Rail. If Your Nato Rail Is Narrow Or Wider, It Requires To Re-Adjust The Nato Clamp's Width.
The Nato Clamp Comes With A Locking Lever For Quickly Lock And Release.
Features
- HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS | 1) Take out the 2 Phillip head screws 2) Remove the little cover and red lever 3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail 4) Re-install the cover
- The NATO Clamp comes with a locking lever for quickly lock and release
- Features 1/4-20 and 3/8-16 locating holes on the top, allows to mount ballhead, friction arm, cold shoe adapter, etc.
- The NATO clamp is pre-adjusted to accomodate to the 20.5mm width NATO rail. If your NATO rail is narrow or wider, it requires to re-adjust the NATO clamp's width
- Constructed from aluminum alloy, the mini NATO clamp is sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #10
NICEYRIG 15mm Single Rod Holder Camera Hot Shoe Mount 15mm Rod Rail Support for Follow Focus, EVF Mount - 478
Asin: B0B6HB1VXC
Rail Extension Use By Connecting A 15Mm Rod For Follow Focus, T5 Ssd Holder, Microphone, Etc..
Construct From Aluminum Alloy, Small And Solid.
Secure The 15Mm Single Rod Clamp With A Thumbscrew, Built-In Loacting Hole And If Necessary You Can Choose To Tighten Via Spanner.
Can Attach To The Camera Hot Shoe Or Cold Shoe Adapter Directly.
Features
- Shoe mount to standard 15mm rod rail clamp
- Can attach to the camera hot shoe or cold shoe adapter directly
- Rail extension use by connecting a 15mm rod for follow focus, T5 SSD holder, microphone, etc.
- Secure the 15mm single rod clamp with a thumbscrew, built-in loacting hole and if necessary you can choose to tighten via spanner
- Construct from aluminum alloy, small and solid
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.08 pounds
See On Amazon #11
NICEYRIG 3-Side Triple Cold Shoe Extension Bracket Heavy-Duty Cheese Bar with 1/4 Threads for Tripod Selfie Stick Gimbal, Camera Phone Vlog Vlogging Light Mic Mount - 468
Asin: B09FXBPS71
[180 Degree Tilt Shoe Mount] Comes With 3 Cold Shoe Mounts And Arri Locating Holes To Satisfy With Your Shooting Needs. You Can Add Various Accessories And Attachments E.G. Microphone, Led Light, Phone Holder, Power Bank... And Adjust Any Angle!.
[Sturdy & Lightweight] Made Of Quality Aluminum Alloy, Duable To Last Long.
[Ultra Thick And Cheese Design Arm] The Extension Arm Is Threaded Over With Lots Of 1/4'' Holes. With 115Mm Long And 8Mm Thickness, It Is Very Solid..
[High Compatibility] Secure Via A 1/4'' Screw On Tripod, Selfie Stick, Monopod, Gimbal Stabilizer Like Zhiyun Weebill S/Lab, Dji Osmo Mobile 3/4.
Features
- [PRATICAL VLOG VLOGGING SOLUTION] The bracket is suitable for vlogging, stream video and sports photography with rich rig points and enough room.
- [HIGH COMPATIBILITY] Secure via a 1/4'' screw on tripod, selfie stick, monopod, gimbal stabilizer like Zhiyun Weebill S/Lab, DJI Osmo Mobile 3/4
- [180 DEGREE TILT SHOE MOUNT] Comes with 3 cold shoe mountS and ARRI locating holes to satisfy with your shooting needs. You can add various accessories and attachments e.g. microphone, LED light, phone holder, power bank... and adjust any angle!
- [ULTRA THICK AND CHEESE DESIGN ARM] The extension arm is threaded over with lots of 1/4'' holes. With 115mm long and 8mm thickness, it is very solid.
- [STURDY & LIGHTWEIGHT] Made of quality aluminum alloy, duable to last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.20 Pounds
See On Amazon #12
NICEYRIG 15mm Single Rod Clamp with Cold Shoe Extension Plate for Wireless Transmitter/Reciever, Monitor, Mic, EVF Mount - 457
Asin: B099RSLC1T
Multi Use | The 15Mm Rod Mount Adapter Enables You To Attach Various Accessories And Attachments Like Microphone, Led Light, Web Cam, Action Camera Holder, Etc.
Recommend Product | Compatible With Niceyrig Fx6/Fs5 Extension 15Mm Rod Mount 456.
Easy To Mount / Unmount | Can Connects A 15Mm Rod, Tighten And Loosen With A Wingnut Screw.
Multiple Mounting Points | Features A Mini Extension Plate With Cold Shoe Mount, Arri And 1/4-20 Locating Holes.
Features
- UNIVERSAL USAGE | Fits for any industial standard 15mm rod support system
- MULTIPLE MOUNTING POINTS | Features a mini extension plate with cold shoe mount, ARRI and 1/4-20 locating holes
- MULTI USE | The 15mm rod mount adapter enables you to attach various accessories and attachments like microphone, LED light, web cam, action camera holder, etc
- EASY TO MOUNT / UNMOUNT | Can connects a 15mm rod, tighten and loosen with a wingnut screw
- RECOMMEND PRODUCT | Compatible with NICEYRIG FX6/FS5 Extension 15mm Rod Mount 456
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #13
NICEYRIG Hot Shoe Top Cheese Handle Grip Mount for DSLR Camera Applicable for Panasonic GH5 GH4 Compatible with Sony A6400 A6500 A7Riii A7iii A7Sii - 086
Asin: B07ZPRDR9W | Model: HANDLE086 | PartNumber: HANDLE086 | Ean: 0644925431466 | UPC: 644925431466
The Cheese Top Handle Provides An Abundance Of 1/4''-20, 3/8''-16 Mounting Points So You Can Mount Additional Accessories And Use The Shoe Mount Combine With Other Devices.
High Quality, Made Of Sturdy Aluminum Alloy.
Quick Release Attach And Detach On The Camera, Without Needing Screws.
Features A Cold Shoe Mount On The Top To Mount Standard Shoe Accessories, Such As A Articulating Arm, Or Ball Head Adapter For A Monitor Or Flash.
Features
- Niceyrig hot shoe handle 086 - fits for any mirrorless cameras with a standard cold shoe mount, such as Panasonic GH5 GH5S GH4, Sony A7Riii A7iii FS5, Canon, Nikon, etc.
- Features a cold shoe mount on the top to mount standard shoe accessories, such as a articulating arm, or ball head adapter for a monitor or flash
- The cheese top handle provides an abundance of 1/4''-20, 3/8''-16 mounting points so you can mount additional accessories and use the shoe mount combine with other devices
- Quick release attach and detach on the camera, without needing screws
- High quality, made of sturdy aluminum alloy
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.37 pounds
See On Amazon #14
NICEYRIG NATO Lock Clamp with Quick Release Safety Rail 7cm for Video Light Monitor Microphone
Asin: B07HNYHLXS | Model: 80 | PartNumber: 80 | Ean: 0685646809073, 0655630036495, 0655630034569 | UPC: 685646809073, 655630034569, 655630036495
Cold Shoe Mount Can Be Attached On The Top, Additional Accessories Also Can Be Mounted, Such As Led Light, Monitor And Microphone,Etc..
Package Includes: 1X Swat Rail Clamp And 1X 7Cm Safety Rail.
How To Adjust The Clamp For Multiple Different Spec Rails | 1) Take Out The 2 Phillip Head Screws 2) Remove The Little Cover And Red Lever 3) Slip The Clamp Over Your Rail, Re-Position And Then Tighten Down The Star Wheel With The Red Lever, Set The Clamp Pressure Where You Like It For Your Rail 4) Re-Install The Cover.
Nato Clamp With A Locking Lever For Quick Lock And Release..
The Nato Clamp Is Adjusted To Fit The Nato Rail Of 20.5Mm Width, So It Works For Most Of The Nato Rails On The Market, It Do Need To Get The Lock At The Right Position When Works For Some Nato Rail With Particular Width..
Features
- 1/4"-20 and 3/8"-16 Thread Holes on the top, allows to mount small camera/monitor or wireless receiver.
- The NATO clamp is adjusted to fit the NATO rail of 20.5mm width, so it works for most of the NATO rails on the market, it do need to get the lock at the right position when works for some NATO rail with particular width.
- Cold shoe mount can be attached on the top, additional accessories also can be mounted, such as led light, monitor and microphone,etc.
- NATO Clamp with a locking lever for quick lock and release.
- Package Includes: 1x Swat Rail Clamp and 1x 7cm Safety Rail
- HOW TO ADJUST THE CLAMP FOR MULTIPLE DIFFERENT SPEC RAILS | 1) Take out the 2 Phillip head screws 2) Remove the little cover and red lever 3) Slip the clamp over your rail, re-position and then tighten down the star wheel with the red lever, set the clamp pressure where you like it for your rail 4) Re-install the cover
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #15
NICEYRIG 15mm Rod Clamp, Single Rod Holder for 15mm Rail Support System, EVF Mount, LED Light, Microphone - 331
Asin: B07XSP436Q | Model: US-331 | PartNumber: US-331 | Ean: 0644925431190 | UPC: 644925431190
Still, Can Be Used A 15Mm Rod To Connect Evf Mount, Monitor Mount, Microphone Mount Or Ssd T5 Mount - Any Other Rigs With 15Mm Rod Clamp.
Made Of Aluminum Alloy, Durable To Last Long.
3 X Rubber Pads On Bottom To Protect From Scratching & Twisting.
Built-In Two 1/4’’-20 Threaded Holes On The Bottom, The Single Rail Clamp Allows To Install Either A Cold Shoe Adapter Or A Magic Arm.
Features
- Niceyrig 15mm rod clamp 331 is equipped with one counterbore hole so that it can be mounted on top handle, camera rig cage or bmpcc 4k directly through 1/4 screw !
- Built-in two 1/4 -20 threaded holes on the bottom, the single rail clamp allows to install either a cold shoe adapter or a magic arm
- Still, can be used a 15mm rod to connect EVF mount, monitor mount, microphone mount or SSD T5 mount - any other rigs with 15mm rod clamp
- 3 x rubber pads on bottom to protect from scratching & twisting
- Made of aluminum alloy, durable to last long
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.09 pounds
See On Amazon #16
NICEYRIG 15mm Rod Holder to Cold Shoe Compatible with ARRI Thread Applicable for EVF Mount Follow Focus Microphone - 494
Asin: B09M6W15D8
It Provides An Easy Way To Add Microphone To Your Rig.
Made Of Aluminum Alloy, Sturdy And Lightweight.
Lock Via A 3/8’’-16 Screw And Tighten With Screwdriver.
Can Attach To The Camera Cage Or Top Grip For 15Mm Railblock Extension Or On The Cage Side For Evf Mount, Follow Focus, Etc..
Features
- ARRI mount 15mm single rod clamp with a cold shoe
- Can attach to the camera cage or top grip for 15mm railblock extension or on the cage side for EVF mount, follow focus, etc.
- It provides an easy way to add microphone to your rig
- Lock via a 3/8 -16 screw and tighten with screwdriver
- Made of aluminum alloy, sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
See On Amazon #17
NICEYRIG Cold Shoe Extension Bracket Multi-Functional for DJI RS 3/3 PRO/RS 2/RSC 2/Ronin S/SC, Tripod and Camera Vlog Vlogging Holder Mount - 392
Asin: B08FHQXP16 | Ean: 0789219282970 | UPC: 789219282970
[Multiple Connections] Secure Via 1/4, 3/8 Quick Release Camera Screw. It Could Be Firmly Attached On Your Gimbal Tripod Or Mirrorless Camera.
Made Of Alumunium Alloy With Cheese Plate Design, Sturdy And Lightweight.
[Anti-Scratch] Rubber Cushion On The Bottom Is Helpful To Protect From Scratching And Twist.
[Rich Extension Possibilities] Features An Abundance Of 1/4’’-20, 3/8’’-16 Locating Holes And A Cold Shoe Mount On The Extention Arm To Attach Accessories Such As Microphone, Monitor Mount, Articulating Arm, V Lock Quick Release Plate, Handle, Etc..
Features
- [UNIVERSAL] The extension bracket perfectly fits for DJI Ronin Series via 1/4'' & 3/8'' screws connection, and yet tripod, monopod, DSLR camera.
- [RICH EXTENSION POSSIBILITIES] Features an abundance of 1/4 -20, 3/8 -16 locating holes and a cold shoe mount on the extention arm to attach accessories such as microphone, monitor mount, articulating arm, V lock quick release plate, handle, etc.
- [MULTIPLE CONNECTIONS] Secure via 1/4, 3/8 quick release camera screw. It could be firmly attached on your gimbal tripod or mirrorless camera
- [ANTI-SCRATCH] Rubber cushion on the bottom is helpful to protect from scratching and twist
- Made of alumunium alloy with cheese plate design, sturdy and lightweight
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 0.18 Pounds
See On Amazon #18
NICEYRIG Tablet Tripod Mount Handheld Video Holder Kit for iPad Mini 7.9/ Air 10.5 10.9/ Pro 11 12.9, Galaxy Tab S8/S7/S6 with 15mm Rod Handle Set, 12 15mm Rod and Rail Block [Aluminum Alloy] - 511
Asin: B0B218NK7S
131Mm - 245Mm Wide Range Mounting Clamp Adopting Drawer-Type Instead Of Spring-Loading System, Is Convenient To Adjust A Desired Height And Secure Via Thumbscrew. Padding Angled-Gel On The Mouth Prevents The Tablet From Twisting And Scratching.
Easy To Assemble, Connecting The Tablet Holder With The Handles Through 15Mm Rail Block And 15Mm Rod. Quickly Switch Between Hand-Held Shooting And Arca Tripod Shooting With Built-In Arca-Swiss Bottom Plate.
15Mm Rod Rail Grip Set With Unsmooth Surface Featuring Lines Increases Friction And Is More Comfortable To Hold. Built-In A 1/4’’-20 Threaded Hole On The End For Your Shoulder Strap Option.
Features Dual Cold Shoe Extension Bar On The Top Of The Tablet Holder For Accessories Like Microphone, Flash Light; Furthermore, Threaded 1/4’’, 3/8’’ & Arri Sufficient Locating Holes Over The Back Side For Diy Operation.
Features
- Dual handheld support kit for vlog vlogging, livestreaming, video record and even Run-and-Gun steady shoot on tablet
- Features dual cold shoe extension bar on the top of the tablet holder for accessories like microphone, flash light; furthermore, threaded 1/4 , 3/8 & ARRI sufficient locating holes over the back side for DIY operation
- 131mm - 245mm wide range mounting clamp adopting drawer-type instead of spring-loading system, is convenient to adjust a desired height and secure via thumbscrew. Padding angled-gel on the mouth prevents the tablet from twisting and scratching
- 15mm rod rail grip set with unsmooth surface featuring lines increases friction and is more comfortable to hold. Built-in a 1/4 -20 threaded hole on the end for your shoulder strap option
- Easy to assemble, connecting the tablet holder with the handles through 15mm rail block and 15mm rod. Quickly switch between hand-held shooting and Arca tripod shooting with built-in ARCA-Swiss bottom plate
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: NICEYRIG
Weight: 1.40 pounds
See On Amazon #19
NICEYRIG Grip for Sigma FPL FP, Camera Right Handle with Premium Leather (Brown Color) - 370
Asin: B08CN8SN46 | Ean: 0789219282734 | UPC: 789219282734
There Is A Small Lug On The Front Aligned With Your Thumb, More Stable While Holding. Round Edge Protects Hand From Scratch.
Alumium Alloy And Leather Material, Lightweight And Sturdy.
Secured Via A 1/4 Screw And Positioning Pin. Besides, The Grip Comes With A Flat Screw Driver Absorbed Underneath For You To Tighten And Loosen Quickly.
Add Plenty Of 1/4''-20 And Arri Locating Points To Attach More Accessories. Also Features 1/4 And M2.5 Threads On The Top To Mount A Cold Shoe Adapter For Microphone, Flash Light, Etc..
Features
- Dedicated for Sigma FPL/FP, Niceyrig grip 370 is form-fitting the camera like its original skin. Provides a good grasp for your handheld shooting.
- Add plenty of 1/4''-20 and Arri locating points to attach more accessories. Also features 1/4 and M2.5 threads on the top to mount a cold shoe adapter for microphone, flash light, etc.
- There is a small lug on the front aligned with your thumb, more stable while holding. Round edge protects hand from scratch
- Secured via a 1/4 screw and positioning pin. Besides, the grip comes with a flat screw driver absorbed underneath for you to tighten and loosen quickly
- Alumium alloy and leather material, lightweight and sturdy
- See more on Amazon...
Brand: NICEYRIG | Manufacturer: Niceyrig
Weight: 0.22 pounds
See On Amazon
Looking For Something Else?
Search