Aopin Water Level Sensor Switch Stainless Steel,Liquid Level Sensor Float Switch, Plastic Ball Float Controller For Water Pump Fish Tank Cistern Sump Filter Aquarium Swim Pool Garden Pond Liquid 2 Pcs
Asin: B095HRKQDF | Ean: 0658099128367 | UPC: 658099128367
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★High Quality Materials★: The Liquid Level Switch Is Made Of High Quality Stainless Steel As A Whole, Seamless Laser Welding, No Burrs, Compact & Durable. High Temperature Resistance. Stainless Steel Even Can Work At Temperatures Up To 248˚F(120°C). The Maximum Pressure Resistance Of The Stainless Steel Float Can Reach 30Kg/Cm2. Contacts Are Plated With Rhodium, Its Life Span Can Reach 2 Million Times. Switch Liquid Controller Can Be Installed Above Or On Side Of The Liquid Level As Required..
★Diy Can Be Adjusted★: Normally Closed (Nc) And Normally Open (No) Can Be Adjusted Manually, You Need To Use A Vise To Pull Down The Circlip Under The Float Switch, Then Adjust The Direction Of The Float To Realize The Conversion Between "Nc" And "No". The Normal State Is "Nc". The Liquid With High Viscosity, Generally Should Choose A Larger Outer Diameter Float. If You Want To Control A Large Liquid Range, You Can Use 2 Different Length Combinations, Or Buy A Double Float Level Switch..
★High Sensitivity★: Our Ring Magnet Inside The Float Accurately Controls The On And Off Of The Reed Switch. Sealing Gasket Can Prevent Water From Leaking From The Mounting Hole. High Temperature Resistant Wire Copper Plated With Silver, Surface Braided Layer Insulation, High Temperature Resistant, Prevent Oxidation, Greatly Extending The Service Life. Connection Part Adopts Waterproof Solid Glue, Which Has Better Waterproof Performance And Good Sealing Effectand To Protect The Safety Of Users!.
★Application★: Liquid Level Sensor Is A Device Used To Sense The Liquid Level In The Storage Tank. This Product Can Be Used For Liquid Level Sensing, Alarm, Signal Transmission In Water Dispensers, Water Purifiers, Water Heaters, Coffee Machines, Small Refrigerators And Other Home Appliances. Specially Used For Fish Tanks, Water Pumps, Cooling Barrel, Ponds, Agricultural Equipment, Cistern Alarm, Sump Filter Aquarium Swim Pool, Garden, Well, Water Towers And Other Fields..
Features
- Specification : Max Switching Current : 0.5 A ; Max Breakdown Voltage : 220V ; Max Carry Current : 1.0 A ; Max Pressure: 100 PSI / 248 F (120 C) ; Wire Length : 300mm ; M10 Metric Thread. Model: ZS12010:.
- Application : Liquid level sensor is a device used to sense the liquid level in the storage tank. This product can be used for liquid level sensing, alarm, signal transmission in water dispensers, water purifiers, water heaters, coffee machines, small refrigerators and other home appliances. Specially used for fish tanks, water pumps, cooling barrel, ponds, agricultural equipment, cistern alarm, sump filter aquarium swim pool, garden, well, water towers and other fields.
- HIGH QUALITY MATERIALS : The liquid level switch is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistance. Stainless steel even can work at temperatures up to 248 F(120 C). The maximum pressure resistance of the stainless steel float can reach 30kg/cm2. Contacts are plated with rhodium, its life span can reach 2 million times. Switch liquid controller can be installed above or on side of the liquid level as required.
- HIGH SENSITIVITY : Our ring magnet inside the float accurately controls the on and off of the reed switch. Sealing gasket can prevent water from leaking from the mounting hole. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation, greatly extending the service life. Connection part adopts waterproof solid glue, which has better waterproof performance and good sealing effectand to protect the safety of users!
- DIY CAN BE ADJUSTED : Normally Closed (NC) and Normally Open (NO) can be adjusted manually, you need to use a vise to pull down the circlip under the float switch, Then adjust the direction of the float to realize the conversion between NC and NO. The normal state is NC. The liquid with high viscosity, generally should choose a larger outer diameter Float. If you want to control a large liquid range, you can use 2 different length combinations, or buy a double float level switch.
- See more on Amazon...
Brand: Aopin | Manufacturer: Aopin-Hardware
See On Amazon Similar To Aopin Water Level Sensor Switch
#1
1 pcs lot Non-Contact Level Switch Water Tower Water Tank Dedicated Water Level Switch Sensor
Asin: B077HVQ9Q4 | Model: Yu-yxhj1638 | PartNumber: Yu-yxhj1638 | Ean: 6440267866348
Brand: Unknown | Manufacturer: Taida
See On Amazon #2
Level Sense 15 Feet Water Level Float Switch with Mounting Bracket
Asin: B01A4RZULM | Model: LS-FLOAT-KIT | PartNumber: LS-FLOAT-KIT | Ean: 0635797716522 | UPC: 635797716522
Dc Only. Use Ith A Relay Or Contactor For Ac Pump Control.
Conductors Are Sealed An Internal To One Closed, Jacketed Capble..
Sealed For Use Underwater. Recommended Only For Clean Clear Water..
Float Switch Can Detect Either High Level Or Low Level.
Features
- Float Switch Bracket Can Be Used for Pipes from 1" to 4"
- Float Switch Can Detect Either High Level or Low Level
- DC Only. Use ith a relay or contactor for AC pump Control
- Sealed for Use Underwater. Recommended only for clean clear water.
- Conductors are sealed an internal to one closed, jacketed Capble.
- See more on Amazon...
Brand: LEVEL SENSE | Manufacturer: Sump Alarm
See On Amazon #3
Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200
Asin: B072QCHQ2P | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0723610128178 | UPC: 723610128178
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V Dc;Max Carry Current : 1.0A;Max Contact Resistance : 100M Ohm.
Cable Length : 39Cm / 15.3"；Switch Body Size : 65 X 22Mm / 2.6" X0.87" Thread Dia(Approx) : 16Mm / 0.63".
Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P.
Model No. : Dp5200;Max Contact Rating : 10W.
Features
- Package Content : 6 x Water Level Sensor ;Color :Light blue and yellow
- Model No. : DP5200;Max Contact Rating : 10W
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m ohm
- Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P
- Cable Length : 39cm / 15.3 Switch Body Size : 65 x 22mm / 2.6 x0.87 Thread Dia(Approx) : 16mm / 0.63
- See more on Amazon...
Brand: Anndason | Manufacturer: Anndason
Weight: 0.16 pounds
See On Amazon #4
DC0-110V Liquid Water Level Sensor, Float Sensor Switch, Male Thread 1/2 NPT 304 Stainless Steel, Suitable for Liquids of Different densities, pressures and temperatures
Asin: B083BP7Y9F | Model: Jectse6rqbg97h0m | PartNumber: Jectse6rqbg97h0m | Ean: 0738589387884 | UPC: 738589387884
【Premium Quality】This Float Switch For Water Tank Is Made Of High Quality Stainless Steel Material, Which Is Rustproof, Wear Resistant, High Temperature Resistant. It Can Be Used In Weak Acid And Alkali Places..
【Quality Support】A Wonderful Choice For You. If You Have Any Questions With Your Stainless Steel Float Switch For Water Pump, Please Contact Us, We Will Contact You Within 24 Hours And Provide A Complete Solution..
【Wide Application】This Float Switch Normally Closed Open Is Suitable For Liquids Of Different Densities, Pressures And Temperatures. Ideal For Water Dispensers, Water Heaters, Solar Energy, Air Conditioners, Humidifiers, Etc..
【Normal Open Or Close】The Male Thread Size Of This Liquid Float Switch Is 1/2Npt. Normally Open Or Normally Closed Can Be Adjusted According To Your Needs. It Can Do Multi-Point Control, The Control Switch Can Be Fixed With The Liquid Level Position..
Features
- PROFESSIONAL Working Voltage: DC0-110V; Working Current: 0-1A; Working Pressure: 0.2Mpa; Maximum Withstand Voltage: 0.2Mpa; Medium Specific Gravity: 0.7; Maximum Temperature Resistance: 150 .
- NORMAL OPEN OR CLOSE The male thread size of this liquid float switch is 1/2NPT. Normally open or normally closed can be adjusted according to your needs. It can do multi-point control, the control switch can be fixed with the liquid level position.
- PREMIUM QUALITY This float switch for water tank is made of high quality stainless steel material, which is rustproof, wear resistant, high temperature resistant. It can be used in weak acid and alkali places.
- WIDE APPLICATION This float switch normally closed open is suitable for liquids of different densities, pressures and temperatures. Ideal for water dispensers, water heaters, solar energy, air conditioners, humidifiers, etc.
- QUALITY SUPPORT A wonderful choice for you. If you have any questions with your stainless steel float switch for water pump, please contact us, we will contact you within 24 hours and provide a complete solution.
- See more on Amazon...
Brand: Jectse | Manufacturer: Jectse
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.26 Pounds
See On Amazon #5
12V DC Water Level Controller Module Water Level Detection Sensor Automatic Liquid Control Switch PCB Board Supports Automatic Water Pumping/Filling/Draining
Asin: B091ZJDJTG
➤【Anti‑Interference】-- Small Size, Low Power Consumption, Large Switch Capacity, Strong Anti‑Interference, High Functional Stability.
➤【Simple Easy Wiring】-- Using High‑Quality Materials, Excellent Performance, Easy Wiring, And Long Service Life.
➤【Working Principle】-- Stable Realization Of Water Pump When The Pool (Water Tower) Is Short Of Water, And Automatically Stops When It Is Full.
➤【Water Level Detect】-- According To Water Level Of The Detection Pool (Water Tower), The High‑Current Relay Is Controlled To Realize The Control.
Features
- SUPPORT FUNCTION -- Water level sensor controller, supports automatic water pumping, filling and draining. With a small, simple wiring
- WATER LEVEL DETECT -- According to water level of the detection pool (water tower), the high current relay is controlled to realize the control
- ANTI INTERFERENCE -- Small size, low power consumption, large switch capacity, strong anti interference, high functional stability
- WORKING PRINCIPLE -- Stable realization of water pump when the pool (water tower) is short of water, and automatically stops when it is full
- SIMPLE EASY WIRING -- Using high quality materials, excellent performance, easy wiring, and long service life
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.39 x 0.39 x 0.39 Inches | Weight: 0.07 Pounds
See On Amazon #6
Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch
Asin: B071ZG4Y34 | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0723610128154 | UPC: 723610128154
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V Dc;Max Carry Current : 1.0A;Max Contact Resistance : 100M Ohm.
Thread Dia(Approx) : 1.54Cm / 0.6";Hex Head Size(Approx) : 2.5Cm / 1";Body Total Length : 8.8Cm / 3.5";Cable Length : 40Cm / 15.8".
Temperature Rating : -10 ~ +85 C;Float Ball Material : P.P;Float Body Material : P.P;Float Ball Size(Approx) : 2.35 X 1.7Cm (L*D).
Max Contact Rating : 10W;Max Switching Voltage : 100V Dc.
Features
- Color : Black;Net Weight : 24g;Package Content : 6 x Water Level Sensor
- Max Contact Rating : 10W;Max Switching Voltage : 100V DC
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m Ohm
- Temperature Rating : -10 ~ +85 C;Float Ball Material : P.P;Float Body Material : P.P;Float Ball Size(Approx) : 2.35 x 1.7cm (L*D)
- Thread Dia(Approx) : 1.54cm / 0.6;Hex Head Size(Approx) : 2.5cm / 1;Body Total Length : 8.8cm / 3.5;Cable Length : 40cm / 15.8
- See more on Amazon...
Brand: Anndason | Manufacturer: Anndason
Dimensions: 3.30 x 3.30 x 0.60 Inches | Weight: 0.33 Pounds
See On Amazon #7
mxuteuk 2 Pcs Side Mounted Horizontal Liquid Float Switch Water Level Sensor Black for Aquariums Tank DPL-1-BK
Asin: B08B4JQHN9 | Model: DPL-1-BK | PartNumber: DPL-1-BK
Thread Dia(Approx): M16 Mm ; Thread Dia(Approx) : 1.55Cm / 0.61" ; Float Ball Size(Approx) : 2.3 X 1.7Cm /0.9" X 0.67" (L*D) ; Total Length : 84Mm / 3.31" ; Cable Length: 40Cm/15.8".
Package Content : 2 Pcs X Float Switch.
The Switch Has The Advantages Of High Sensitivity And Durability. Pp Material Is Environmentally Friendly And Has Excellent Acid And Alkali Resistance..
Max Contact: Rating 10W ; Max Switching Voltage: 100V Dc ; Max Switching Current: 0.5A ； Max Contact Resistance : 100M Ohm.
Features
- Product Name: Water Level Sensor ; Float Ball Material: PP ; Color : Black ; Temperature Rating: -30~125 degree Centigrade ; Switch Forms N.O /N.C.
- Max Contact: Rating 10W ; Max Switching Voltage: 100V DC ; Max Switching Current: 0.5A Max Contact Resistance : 100m ohm
- Thread Dia(Approx): M16 mm ; Thread Dia(Approx) : 1.55cm / 0.61 ; Float Ball Size(Approx) : 2.3 x 1.7cm /0.9 x 0.67 (L*D) ; Total Length : 84mm / 3.31 ; Cable Length: 40cm/15.8
- The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.
- Package Content : 2 Pcs x Float Switch
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
Weight: 0.11 Pounds
See On Amazon #8
Ximimark 3 pc Water Level Sensor Horizontal PP Side Mount Float Switch for Tank Pool Arduino
Asin: B0B7WPBPBC | Model: LY1653 | PartNumber: LY1653 | Ean: 0735209931656 | UPC: 735209931656
Good Quality, Not Easily Damaged And Good Quality..
Thank You So Much For Your Purchasing From Our Store.Any Question ,Please Feel Free To Contact Us..
Package Indluced：3 Pc Water Level Sensor Horizontal Pp Side Mount Float Switch For Tank Pool Arduino.
Use Them With Hydroponics, Saltwater Tank, Freshwater Tank, Gardening, Aquariums For Power Head Control, Pet Bowls, Fish Tanks, Filtration, Heating Etc..
Features
- A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.
- Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating etc.
- Good quality, Not easily damaged and good quality.
- Package Indluced 3 pc Water Level Sensor Horizontal PP Side Mount Float Switch For Tank Pool Arduino
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #9
Roamoris DC12V Pump Switch Control Automatic Water Level Controller with 6.5ft Detector Sensor, Float Switch Replacement Liquid Level Switch Relay for Electric Solenoid Valve,Ball Valve,Pump,WC02
Asin: B0C5L69VQK | Model: DC 12V | PartNumber: DC 12V
【12V Equipment】You Can Choose The 12V Solenoid Valve, Electric Ball Valve, Water Pump To Use With The Controller.The Load Current Of The Controller Is 20A..
【Application】This Controller Can Help You Realize The Automatic Water Supply And Drainage Of Fish Ponds, Reservoirs, Swimming Pools, And Water Tanks..
【Noitce】Before Installation, Please Make Sure You Have Electrical Knowledge. If You Have Questions About Product Use, Please Contact Us. We Will Reply You Within 24 Hours..
【Stainless Steel Detector With 6.5Ft Wires】Corrosion, No Rust, Suitable For Long-Time Use..
【Water Supply And Drain Mode】Open Is Water Supply Mode.Close Is Drain Mode. Electric Ball Valve And Electric Solenoid Valve Just Can Be Used For Water Supply Mode. Pump Can Be Used For Water Supply Or Drain Mode..
Features
- Easy to use Only a screwdriver is needed to quickly install the power cable and detector cable on the water level controller.
- Water Supply and Drain Mode Open is Water Supply Mode.Close is Drain Mode. Electric ball valve and electric solenoid valve just can be used for water supply mode. Pump can be used for water supply or drain mode.
- 12V Equipment You can choose the 12v solenoid valve, electric ball valve, water pump to use with the controller.The load current of the controller is 20A.
- Stainless Steel Detector with 6.5ft Wires Corrosion, no rust, suitable for long-time use.
- Application This controller can help you realize the automatic water supply and drainage of fish ponds, reservoirs, swimming pools, and water tanks.
- Noitce Before installation, please make sure you have electrical knowledge. If you have questions about product use, please contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: Roamoris | Manufacturer: Roamoris
Dimensions: 2.40 x 3.20 x 1.70 Inches
See On Amazon #10
Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output
Asin: B07FC5RGC7 | Model: Y25-V | PartNumber: Y25-V | Ean: 0702004746242 | UPC: 702004746242
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #11
HiLetgo G1/2" Water Flow Hall Sensor Switch 1-30L/min 1.75MPa Flow Meter Flowmeter Counter Water Flow Sensor
Asin: B01N2NJQHD
Maximum Operating Current: 15 Ma (Dc 5V).
Load Capacity: 10 Ma (Dc 5V).
Working Voltage Range: Dc 5~18 V.
The Lowest Rated Working Voltage: Dc4.5 5V-24V.
Features
- 1-30L/min 1.75MPa 1/2" Hall Effect Flowmeter Control Water Flow Sensor
- The lowest rated working voltage: DC4.5 5V-24V
- Maximum operating current: 15 mA (DC 5V)
- Working voltage range: DC 5~18 v
- Load capacity: 10 mA (DC 5V)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
Taidacent Automatic Water Level Controller Water Pump Controller Water Tank Automatic Filling System Either to Fill or Empty a Tank Two Non Contact Water Tank Water Level Sensors 1 Meter Cable
Asin: B07RD7Y39P | Model: TD-DJL-2Y | PartNumber: TD-DJL-2Y
Relay Dry Contact Output, Can Be Applied To A Variety Of Load..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
Control Diversification, Can Control The Pump In Manual Or Automatic Mode..
Ac95 ~ 265V Wide Voltage Power Supply..
Features
- When the liquid level of the container is too low, the low liquid level alarm signal from the low liquid level sensor is triggered to trigger the controller to close the relay to start the water pump to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the controller to disconnect the relay to automatically stop the water pump. You can use the controller to either to fill or empty a tank
- AC95 ~ 265V wide voltage power supply.
- Relay dry contact output, can be applied to a variety of load.
- Control diversification, can control the pump in manual or automatic mode.
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida Century Technology
Dimensions: 0.00 x 4.53 x 0.00 Inches
See On Amazon #13
Maxmoral 2pcs M16 Water Level Sensor Flow Inductance Water Pump Controller DC 110V Side Mount Horizontal Liquid Float Switch for Aquariums Fish Tank Hydroponics Pool
Asin: B07QRGTVYD | Ean: 0713871355772 | UPC: 713871355772
Mainly Used To Sense The Liquid Level In A Tank To Turn On/Off A Pump, An Indicator , An Alarm Or Other Device..
Suitable For Hydroponics, Saltwater , Freshwater , Gardening, Aquariums For Power Control, Pet Bowls, Fish Tanks, Filtration, Heating Etc..
2 Way Optional To Install As Normally Closed/Open Switch According To Your Needs..
Float Level Switch Is A Kind Of Liquid Level Control Device With Simple Structure, No External Power Supply, No Complicated Circuit, Convenient To Use. Has The Advantage Of Smaller Size And Longer Service Life Than Mechanical Switch..
Features
- Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC; Switching current (Max): 0.5A.
- Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch.
- Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device.
- 2 Way optional to install as normally closed/open switch according to your needs.
- Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc.
- See more on Amazon...
Brand: Maxmoral | Manufacturer: Maxmoral
See On Amazon #14
Gikfun M8 Liquid Level Sensor Fish Tank Water Float Switch PP Plastic Ball Float Controller DIY Kit for Arduino EK1373x3
Asin: B07G13JB57 | Ean: 8002124225606
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #15
Aopin Water Level Sensor Switch Stainless Steel,Liquid Level Sensor Float Switch, Plastic Ball Float Controller For Water Pump Fish Tank Cistern Sump Filter Aquarium Swim Pool Garden Pond Liquid 1 Pcs
Asin: B095HRQV5Z | Ean: 0658099128107 | UPC: 658099128107
★High Quality Materials★: The Liquid Level Switch Is Made Of High Quality Stainless Steel As A Whole, Seamless Laser Welding, No Burrs, Compact & Durable. High Temperature Resistance. Stainless Steel Even Can Work At Temperatures Up To 248˚F(120°C). The Maximum Pressure Resistance Of The Stainless Steel Float Can Reach 30Kg/Cm2. Contacts Are Plated With Rhodium, Its Life Span Can Reach 2 Million Times. Switch Liquid Controller Can Be Installed Above Or On Side Of The Liquid Level As Required..
★Diy Can Be Adjusted★: Normally Closed (Nc) And Normally Open (No) Can Be Adjusted Manually, You Need To Use A Vise To Pull Down The Circlip Under The Float Switch, Then Adjust The Direction Of The Float To Realize The Conversion Between "Nc" And "No". The Normal State Is "Nc". The Liquid With High Viscosity, Generally Should Choose A Larger Outer Diameter Float. If You Want To Control A Large Liquid Range, You Can Use 2 Different Length Combinations, Or Buy A Double Float Level Switch..
★High Sensitivity★: Our Ring Magnet Inside The Float Accurately Controls The On And Off Of The Reed Switch. Sealing Gasket Can Prevent Water From Leaking From The Mounting Hole. High Temperature Resistant Wire Copper Plated With Silver, Surface Braided Layer Insulation, High Temperature Resistant, Prevent Oxidation, Greatly Extending The Service Life. Connection Part Adopts Waterproof Solid Glue, Which Has Better Waterproof Performance And Good Sealing Effectand To Protect The Safety Of Users!.
★Application★: Liquid Level Sensor Is A Device Used To Sense The Liquid Level In The Storage Tank. This Product Can Be Used For Liquid Level Sensing, Alarm, Signal Transmission In Water Dispensers, Water Purifiers, Water Heaters, Coffee Machines, Small Refrigerators And Other Home Appliances. Specially Used For Fish Tanks, Water Pumps, Cooling Barrel, Ponds, Agricultural Equipment, Cistern Alarm, Sump Filter Aquarium Swim Pool, Garden, Well, Water Towers And Other Fields..
Features
- Specification : Max Switching Current : 0.5 A ; Max Breakdown Voltage : 220V ; Max Carry Current : 1.0 A ; Max Pressure: 100 PSI / 248 F (120 C) ; Wire Length : 300mm ; M10 Metric Thread. Model: ZS10010:.
- Application : Liquid level sensor is a device used to sense the liquid level in the storage tank. This product can be used for liquid level sensing, alarm, signal transmission in water dispensers, water purifiers, water heaters, coffee machines, small refrigerators and other home appliances. Specially used for fish tanks, water pumps, cooling barrel, ponds, agricultural equipment, cistern alarm, sump filter aquarium swim pool, garden, well, water towers and other fields.
- HIGH QUALITY MATERIALS : The liquid level switch is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistance. Stainless steel even can work at temperatures up to 248 F(120 C). The maximum pressure resistance of the stainless steel float can reach 30kg/cm2. Contacts are plated with rhodium, its life span can reach 2 million times. Switch liquid controller can be installed above or on side of the liquid level as required.
- HIGH SENSITIVITY : Our ring magnet inside the float accurately controls the on and off of the reed switch. Sealing gasket can prevent water from leaking from the mounting hole. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation, greatly extending the service life. Connection part adopts waterproof solid glue, which has better waterproof performance and good sealing effectand to protect the safety of users!
- DIY CAN BE ADJUSTED : Normally Closed (NC) and Normally Open (NO) can be adjusted manually, you need to use a vise to pull down the circlip under the float switch, Then adjust the direction of the float to realize the conversion between NC and NO. The normal state is NC. The liquid with high viscosity, generally should choose a larger outer diameter Float. If you want to control a large liquid range, you can use 2 different length combinations, or buy a double float level switch.
- See more on Amazon...
Brand: Aopin | Manufacturer: Aopin-Hardware
See On Amazon #16
Gikfun Non-Contact Liquid Level Sensor Water Level Switch XKC-Y25-NPN for Arduino EK1954
Asin: B086QX726M | Model: EK1954 | PartNumber: EK1954 | Ean: 8002124223787
The Liquid Level Sensor Can Detect The Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In High-Pressure Closed Containers, Has No Special Requirements On The Material Of The Liquid Medium And The Cont.
Brown Wire : Vcc(Dc 5-12V Connects Power Positive) Yellow Wire:Out( Signal Output) Blue Wire: Gnd(Connects Power Negative) Black Wire:M(Mode Of No/Nc).
The Liquid Level Sensor Has Instruction, Please Find On The Product Information..
Non-Contact Liquid Level Sensor Is Not Afraid Of Affecting Water Quality, Does Not Need Regular Cleaning, Long Service Life.
Features
- Intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break the influence of container wall thickness and achieve a true non-level Contact detection.
- Non-contact liquid level sensor is not afraid of affecting water quality, does not need regular cleaning, long service life
- The liquid level sensor can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure closed containers, has no special requirements on the material of the liquid medium and the cont
- The liquid level sensor has instruction, please find on the product information.
- Brown wire : VCC(DC 5-12V connects power positive) Yellow wire:OUT( signal output) Blue wire: GND(connects power negative) Black wire:M(mode of NO/NC)
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #17
Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output
Asin: B07FC8K28F | Model: Y26-V | PartNumber: Y26-V | Ean: 0702004746235 | UPC: 702004746235
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #18
5 Pcs Pack of Water Level Sensor Side Mounting PP Plastic Liquid Float Switch M16 Screw
Asin: B08HX8ZR9Z | Ean: 0779296206198 | UPC: 779296206198
Pp Plastic Material.
5 Pcs Pack.
Working Temperature : -20~80℃.
Side Mounting, Can Be Mounted On The Wall Of Tank.
Features
- M16 Screw mounting with T silicone seal
- Side mounting, can be mounted on the wall of tank
- PP plastic material
- Working temperature : -20~80
- 5 PCS Pack
- See more on Amazon...
Brand: GAGALOR | Manufacturer: GAGALOR
Weight: 140.00 Grams
See On Amazon #19
Aopin Thermal Control Switch KSD301 Normally Closed NC 85 Degrees 250V 16A Toast Oven Thermostat Temperature Switch-Degree 8Pcs
Asin: B09C8NB89Y | Model: Aopin-b21030401ap0003 | PartNumber: Aopin-b21030401ap0003 | Ean: 0785387259165 | UPC: 785387259165
③ Features: Bimetal Chip Contact Sensor, Sensitive Response, Fast Response Speed, Safety, Accurate Action Temperature, Durable, No Arc Phenomenon..
⑤Package: 8Pcs X 85 ° C Temperature Sensor..
④Application: Generally Used In Water Heater, Kettle, Coffee Maker, Microwave Oven, Toast, Oven, Etc. To Repair And Replace Necessary Accessories..
②State: The Original State Of The Temperature Control Switch Contact Is Normally Closed. When The Temperature Exceeds The Rated Temperature Of Rated Degrees Celsius, The Thermostat Will Be Disconnected..
Features
- Parameters: Product model: KSD301; operating temperature: 85 3; rated voltage: 250; volt rated current: 16 A; switch type: NC (normally closed):Material: ceramic metal;
- State: The original state of the temperature control switch contact is normally closed. When the temperature exceeds the rated temperature of Rated degrees Celsius, the thermostat will be disconnected.
- Features: Bimetal chip contact sensor, sensitive response, fast response speed, safety, accurate action temperature, durable, no arc phenomenon.
- Application: generally used in water heater, kettle, coffee maker, microwave oven, toast, oven, etc. to repair and replace necessary accessories.
- Package: 8pcs x 85 C temperature sensor.
- See more on Amazon...
Brand: Aopin | Manufacturer: Aopin-Hardware
Dimensions: 1.77 x 2.56 x 1.57 Inches | Weight: 52.00 Grams
See On Amazon #20
Madison M8000 Liquid Level Sensor, Miniature Vertical Float Switch, Polypropylene, 1/8" NPT
Asin: B00909404Y | Model: M8000 | PartNumber: M8000 | Ean: 0094700750341 | UPC: 094700750341
Stem Material: Polypropylene.
Note: Switches Are Rated For Resistive Loads. See Our Electrical Considerations For Ul Guidelines For Current (Amperes Resistive) At Different Voltages.
Max Pressure: 100 Psi/221˚F (105˚C).
Mounting: 1/8" Npt.
Float Sg: 0. 80.
Lead Wires: 24", 22 Awg, Mtw Insulated.
Float Material: Polypropylene.
Switch Rating: 30 Watt, Spst.
Electrical Ratings: 240 Vac, 0. 14A; 120 Vac, 0. 28A; 120 Vdc, 0. 07A; 24 Vdc, 0. 28A.
Features
- Approvals: CE, UL, CSA, NSF
- Electrical Ratings: 240 VAC, 0. 14A; 120 VAC, 0. 28A; 120 VDC, 0. 07A; 24 VDC, 0. 28A
- Stem Material: Polypropylene
- Float Material: Polypropylene
- Float SG: 0. 80
- Lead Wires: 24, 22 AWG, MTW Insulated
- Max Pressure: 100 PSI/221 F (105 C)
- Mounting: 1/8 NPT
- Switch Rating: 30 Watt, SPST
- Note: Switches are rated for resistive loads. See our Electrical Considerations for UL guidelines for current (Amperes resistive) at different voltages
- See more on Amazon...
Brand: Madison | Manufacturer: Madison Company
Dimensions: 1.20 x 4.50 x 3.30 inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search