Ready-to-wrap Ready-to-Cut 3" Wide by 49 Feet Long Aluminium Oxide Abrasive for Drum Sander Sandpaper Continuous Roll (Grit:120)
Asin: B0969P4NV5 | Model: 120 | PartNumber: 120 | Ean: 0765819024332 | UPC: 765819024332
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Abrasive Sandpaper Roll Can Work With The Industry Standard Performax, Jet 16-32 Sanders And Other Machinery That Accepts 3” Wide Rolls..
Use For:Designed To Work With An Assortment Of General Purpose Sanding And Woodworking Applications..
Cut To Length,Prevents Waste And Increases Versatility.
Cloth Backed Resin Aluminum Oxide Abrasive Sanding Roll.
Features
- 3"x49' (76.2mmx15 meters) Sandpaper Roll
- Cloth Backed Resin Aluminum Oxide Abrasive Sanding Roll
- Abrasive sandpaper roll can work with the industry standard Performax, Jet 16-32 sanders and other machinery that accepts 3 wide rolls.
- Cut to Length,Prevents waste and increases versatility
- Use for:Designed to work with an assortment of general purpose sanding and woodworking applications.
- See more on Amazon...
Brand: AcbbMNS | Manufacturer: AcbbMns
Dimensions: 0.01 x 49.00 x 3.00 inches
See On Amazon Similar To Readytowrap ReadytoCut 3 Wide by
#1
120 Grit Sandpaper Roll, 3 Inch x 49 Feet Emery Cloth Roll Aluminum Oxide Abrasive Paper Roll Continuous Sandpaper for Metalworking, Woodworker, Furniture Repair, Sanding Automotive Plumbing
Asin: B0BRSCCPQ8 | Ean: 0779953193861 | UPC: 779953193861
Multi Grits Sandpaper: These Abrasive Strips Contain Most Commonly Used Grits 60 80 120 150 180 240 320 400 600 #. Stepping Your Abrasives From Low Grit To High Grit Is A Necessary Process, Choose The Right Grit According To Your Needs..
Widely Use: The Abrasive Sandpaper Could Be Widely Used In Carpentry, Auto Body Repair Project, Polishing And Home Improvement Projects. This Sandpaper For Wood Also Could Be Used For Both Powers As Well As Hand Woodworking Sanding..
Wet And Dry Use: The Continuous Sandpaper Roll Is Durable,Waterproof,Super Flexible,Wear-Resistant,Will Not Easily Break. Sandpaper For Metal Is Suitable For Dry Sanding And Wet Sanding Without Switching Sandpaper..
High Quality Material: These Abrasive Sandpaper Rolls Are Made Of Aluminum Oxide, Which Is Anti-Static, Wear Resisting And Prevent Clogging. This Brown Abrasive Paper Will Not Discolor The Surface You Are Sanding, Using Our Sandpaper Can Reduce Losses And Increase Efficiency..
Features
- Size: 120 grit emery cloth roll, extra coarse sandpaper, the size of each sandpaper roll is 3 inches wide and 49 feet long.
- High Quality Material: These abrasive sandpaper rolls are made of aluminum oxide, which is anti-static, wear resisting and prevent clogging. This brown abrasive paper will not discolor the surface you are sanding, using our sandpaper can reduce losses and increase efficiency.
- Multi Grits Sandpaper: These abrasive strips contain most commonly used grits 60 80 120 150 180 240 320 400 600 #. Stepping your abrasives from low grit to high grit is a necessary process, choose the right grit according to your needs.
- Wet and Dry Use: The continuous sandpaper roll is durable,waterproof,super flexible,wear-resistant,will not easily break. Sandpaper for metal is suitable for dry sanding and wet sanding without switching sandpaper.
- Widely Use: The abrasive sandpaper could be widely used in carpentry, auto body repair project, polishing and home improvement projects. This Sandpaper for wood also could be used for both powers as well as hand woodworking sanding.
- See more on Amazon...
Brand: XHKDSYMC | Manufacturer: XHKDSYMC
Dimensions: 0.10 x 590.60 x 3.00 inches
See On Amazon #2
Peachtree Woodworking Supply Performax Type Ready-to-Cut Ready-to-Wrap Abrasive Sandpaper Rolls 3 inch by 35 feet Long for 16-32 Drum Sanders
Asin: B000H5LY08 | Ean: 0810948010258 | UPC: 810948010258
The Right Amount Of Pressure You Exert On Your Boards Is Absolutely Critical. Too Much And It Will Shorten The Life Of Your Abrasive Roll, Burn The Material Or Cause Problems With The Motor On Your Machinery. To Avoid Too Much Pressure, With Your Machine Turned Off, Place The Material Under The Sanding Drum, The Raise Or Lower The Drum So The Drum Contacts The Material But Can Still Be Rotated By Hand. Take The Stock Out With No More Drum Adjustment And Proceed To Sanding Normally..
When Sanding Misshapen Stock Pieces You Should Always Start Sanding The Piece With The Crown Side Up. This Helps Prevent Tipping Or Rocking When The Piece Is Being Fed Through The Sander. Once The Down Is Gone, Flip The Stock Over And Sand The Other Side. As Always, Take Extreme Care And Caution When Sanding Boards That Are Bowed, Twisted Or Otherwise Imperfect..
Straight Feed? How About Angling Your Stock Feed Through The Drum Instead. Angling The Stock Offers Many Advantages Like Less Loading Due To Glue Lines, Better And More Even Wear And Reduced Motor Loads. Just A Slight Angle Provides You With More Effective Stock Removal. Keep In Mind That To Achieve The Best Finish, The Last Two Passes On The Material Should Always Be With The Grain..
The Rougher Or Lower Grits Like 60 Grit Can Be Used For Abrasive Planing And Dimensioning. The Medium Grits Like 80, 100 And 120 Are Typically Can Be Used For Lighter Dimensioning Projects And General Surface Prep. When Using 150 Grits And 220 Grits We Recommend Using Those Higher Grits For Finishing Passes Only..
Features
- Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and other machinery that accepts 3 wide rolls. These high performance aluminum oxide rolls are designed for all purpose sanding. The grain is resin bonded and have non-loading properties for extra long sanding life. MADE IN THE USA!
- The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be used for lighter dimensioning projects and general surface prep. When using 150 grits and 220 grits we recommend using those higher grits for finishing passes only.
- The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the material or cause problems with the motor on your machinery. To avoid too much pressure, with your machine turned off, place the material under the sanding drum, the raise or lower the drum so the drum contacts the material but can still be rotated by hand. Take the stock out with no more drum adjustment and proceed to sanding normally.
- Straight feed? How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue lines, better and more even wear and reduced motor loads. Just a slight angle provides you with more effective stock removal. Keep in mind that to achieve the best finish, the last two passes on the material should always be with the grain.
- When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the piece is being fed through the sander. Once the down is gone, flip the stock over and sand the other side. As always, take extreme care and caution when sanding boards that are bowed, twisted or otherwise imperfect.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Keystone
Dimensions: 0.01 x 35.00 x 3.00 inches
See On Amazon
Looking For Something Else?
Search