3D Printer Detachable 3950 NTC 100K Thermistor Sensor for Creality Ender 3 5 CR10 CR-10 CR10 Anet A8 Prusa I3 (Pack of 5) (HT-NTC100K)
Asin: B099K2DKXJ | Ean: 0701715460782 | UPC: 701715460782
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For Creality Cr-10S Pro, Cr-X, Ender 3, Ender 3X, Ender-3 Pro, Prusa I3, Anet E10, Etc..
Package Included:5 X Ntc100k Thermistor.
Note: Light Shooting And Different Displays May Cause The Color Of The Item In The Picture A Little Different From The Real Thing. The Measurement Allowed Error Is +/- 1-3Cm..
Detachable Design, Easy To Install..
Features
- Temperature sensor 100K ohm accuracy +/- 1%, total length: 1 meter
- Detachable design, easy to install.
- Suitable for Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Prusa I3, Anet E10, etc.
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- Package included:5 x NTC100K thermistor
- See more on Amazon...
Brand: ATNSINC | Manufacturer: ATNSINC
See On Amazon Similar To 3D Printer Detachable 3950 NTC
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 Inches | Weight: 0.55 pounds
See On Amazon #2
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 Inches | Weight: 15.43 pounds
Warranty: 1 year
See On Amazon #3
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 Inches | Weight: 0.26 pounds
See On Amazon #4
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #5
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 Inches
See On Amazon #6
ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 8.85x8.85x11in Large Printing Size
Asin: B0BJCQ59JS | Model: US-EL-3D-N3P | PartNumber: US-EL-3D-N3P
【Nozzle Kit For Better Printing Effect】The Nozzle Kit Contains A Tc4 Titanium Alloy Throat Pipe, An Aluminum Alloy Flat Heat Sink Structure, And A Brass Nozzle.The Widened Aluminum Heat Sink Paired With The Front Close-Fitting Efficient Cooling Fan For A Better Heat Dissipation Effect And Lower The Temperature Of The Throat Pipe, Thereby Reducing The Possibility Of Nozzle Clogging..
【More Stable Printing】The Z-Axis With Dual Synchronized Lead Screws And Dual-Motor Drive For More Stable Movement Of The Print Head And Higher Printing Accuracy, Avoiding The Printing Deviation Driven By A Single Z-Axis Lead Screw Motor. The 4-Wheel V-Guide Rail Pulley Is Made Of Pom With More Stable Movement, Low Noise, Wear Resistance, And Longer Service Life..
【Smarter Printing Experience】Auto Mesh Bed Leveling Adopts A Non-Contact High Precision Sensor To Automatically Scan 36 (6X6) Points Of The Hotbed And Collect Data In Real-Time, And Then Adjust The Z-Axis Height To Compensate For Any Irregularities And Unevenness Of The Printing Platform. (Only Applicable To Metal Printing Platforms) Smart Resume Printing: The Printer Will Auto-Pause When The Filament Runs Out Or Breaks, And You Can Resume Printing After A Power Outage..
【Dual-Gear Direct Extruder】The New Dual-Gear Direct Drive Extruder Is Made Of Sus303 High-Quality Stainless Steel With A 3:1 Reduction Ratio And Stronger Extrusion Force For Smoother Filament Feeding And More Stable & Accurate Printing, Which Greatly Reduces Nozzle Clogging And Under-Extrusion Issues, Printing Effect Is Better Than Bowden Extruder. Compatible With Multiple Filaments Such As Pla, Tpu, Petg, And Abs..
Features
- Overview of Neptune 3 Pro 225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation.
- Dual-Gear Direct Extruder The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS.
- Nozzle Kit for Better Printing Effect The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging.
- Smarter Printing Experience Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage.
- More Stable Printing The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life.
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 19.00 x 23.00 x 9.00 Inches | Weight: 22.00 pounds
Warranty: 8 years manufacturer
See On Amazon #7
Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 Inches | Weight: 15.60 pounds
Warranty: 1 year warranty
See On Amazon #8
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo
Asin: B09NMJMPN1 | Model: Creality Ender 3 Mainboard | PartNumber: Creality Ender 3 Mainboard
【Driver】Tmc2225 Driver & V0.0.6 Firmware From Creality ( Based On Marlin 2.0.1) For V4.2.7 Board. The Bootloader Has Been Preinstalled..
【After Sale Service】Any Issues Or Questions About Our Product Please Feel Free To Contact Us At Any Time. We Have Professional Technical Team To Provide Technical Supports For You Within 24 Hours..
【Update Firmware Method】Please Copy The Correct Firmware File To A Formated Sd Card With No Other Files In It. Turn Off The Printer And Unplug The Power Cord. Insert The Sd Card & Power Cord, And Turn On The Printer. Wait 10S To Complete The Firmware Updating Process..
【Widely Application】Compatible With Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D Printers. Please Notice: It Only Plug And Play For Ender-3. If You Want To Install It On Other Machine, Please Flash The Relative Machine V4.2.7 Firmware. You Can Download Firmware From Official Website..
Features
- Super Quiet The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- Widely Application Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D printers. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- Driver TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- Update Firmware Method Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- After Sale Service Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.26 pounds
See On Amazon #9
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #10
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
Asin: B0714MR5BC | Model: 3D-RMDZ-5PCS | PartNumber: 3D-RMDZ-5PCS | Ean: 0649910034431 | UPC: 649910034431
Ntc Thermistor: Used For Heated Bed Or Hot End. Our Ender 3 Pro Thermistor Replacement Is Compatible With Most 3D Printers..
After-Sales Service: If You Have Any Unsolvable Problems While Using The Ender 3 Thermistor Replacement, Please Feel Free To Contact Us. Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Long Life Service: High Precision, High Sensitivity, And Fast Temperature Conduction, High-Temperature Resistance..
Note Before Buying: Our Ender 3 Thermistor Is Not Fit For Ender 3 V2/Ender 3S/Cr-10S Pro V2/Cr-10S Pro/Ender 2 Pro/Ender 6/Prusa I3 3D Printer. Please Measure The Length Of Your 3D Printer's Thermistor And Confirm Whether This Thermistor Is Compatible With Yours Before Buying..
Features
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #11
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches | Weight: 0.66 Pounds
See On Amazon #12
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
🌡【Single-Ended Glass Sealed】The Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
🌡【Official Creality 3D Store】Official Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🌡【Easy To Install】Only 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
🌡【The Temperature Measurement】 -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #13
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #14
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #15
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers Resume Print and Model Preview 8.66*8.66*9.84 inch
Asin: B08BL41ZMY | Model: Ender 3 V2 Neo | PartNumber: Ender 3 V2 Neo | Ean: 8935672542577, 8935672542508, 8935672542539, 0735209618557 | UPC: 735209618557
3.Brand New 4.3 Inch Ui User Interface: The Upgraded Ui Adds A Model Preview Function, Making It Easier To Observe The Printing Shape And Progress For Customers. Which Is Convenient For You To Know About The Model Status. Also, It Supports Nine Languages For Different Customers Demand..
5.Silent Motherboard: The Mainboard Is 4.2.2 Version But It Is Silent Mainboard Which Is Different From Ender 3 Mainboard. This Ender-3 V2 Neo Equipped With Self-Developed Silent Motherboard, Which Has Stronger Anti-Interference, Faster And More Stable Motion Performance, Silent Printing And Low Decibel Operation, Create A Quiet Environment.The Extruder Is Upgraded To Full-Metal Extruder, Which Has Greater Extrusion Force And Is More Durable, Reducing The Risk Of Nozzle Blockage..
4.Pc Spring Steel Magnetic Build Plate: Different From Ender 3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Magnetic Build Plate. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion For Filament, And The Finished Models Can Be Easily Removed By Bending The Print Sheet..
2.Cr Touch Auto Bed Leveling: Upgraded Cr Touch 16-Point Automatic Bed Leveling Technology Saves You In The Trouble Of Manual Leveling. Easy To Use, The Intelligent Leveling System Can Automatically Compensate For The Printing Height Of Different Points Of The Hot Bed. It Saves Much More Time For Customers In Long-Time Leveling Adjustment, Quickly Finish The Leveling Process..
Features
- 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.
- 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
- 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.
- 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel magnetic build plate. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.
- 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.The extruder is upgraded to full-metal extruder, which has greater extrusion force and is more durable, reducing the risk of nozzle blockage.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.58 x 17.24 x 16.70 Inches | Weight: 17.20 pounds
Warranty: 1 year
See On Amazon #16
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
【Independent Research And Development Stable Function】Cr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Package Include】1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【About Reflash The Firmware】1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 pounds
See On Amazon #17
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon #18
Creality Ender 3 Auto Bed Leveling Kit, Official CR Touch for Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard, 3D Printer Leveler Sensor Tool Kit Silicone Mounts
Asin: B0BXGCHZDL
More Professional Design: Compared With The Old Bl Touch, The New Cr Touch Uses A Combination Of Optical And Metal Probes, Which Increases The Service Life And Reduces Errors Caused By Magnetic Fields And Temperatures. 3D Automatic Bed Leveling Is Compatible With Pei, Stickers, Glass, Metal Platform. The Number Of Detections Has Reached A Revolutionary 100,000 Times, And The Positioning Accuracy Is ≤0.04Mm..
Package Includes: 1*Cr Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4M Power Cord, 3*Tie Straps, 4*Screws. Download The Firmware From The Official Website Of Creality And Copy It To The Blank Sd Card, Insert It Into The Card Slot Of The 3D Printer, Turn On The Power, And The Printer Will Read And Install The Firmware..
Strong Compatibility: Cr Touch Is An Automatic Leveler Specially Designed For Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/Cr-10 Models, Only Applicable To 32-Bit V4.2.2 And V4.2.7 Motherboards. The Included 3 Brackets Can Be Easily Installed On The Above Models..
Automatic Leveling: Cr Touch Conducts Multi-Point Detection On The Printing Platform, Records The Distance Of Each Point, And Constructs A Virtual Plane. Carry Out Distance Compensation Calculation When Printing, And Automatically Adjust The Nozzle Distance. Matched With The Silicone Leveling Column, It Can Be Leveled For A Long Time After One Leveling. Multiple Use Only Needs To Be Checked With Cr Touch..
Features
- After-sales Service: In order to let more 3D printing enthusiasts enjoy the comfort of CR Touch, we wholeheartedly provide you with 24-hour online after-sales service. Regardless of the various problems you encounter during the installation and use of CR Touch, please contact us in time, and our professional technical team will provide you with detailed solutions.
- Automatic Leveling: CR Touch conducts multi-point detection on the printing platform, records the distance of each point, and constructs a virtual plane. Carry out distance compensation calculation when printing, and automatically adjust the nozzle distance. Matched with the silicone leveling column, it can be leveled for a long time after one leveling. Multiple use only needs to be checked with CR Touch.
- More Professional Design: Compared with the old BL Touch, the new CR Touch uses a combination of optical and metal probes, which increases the service life and reduces errors caused by magnetic fields and temperatures. 3D automatic bed leveling is compatible with PEI, Stickers, Glass, Metal platform. The number of detections has reached a revolutionary 100,000 times, and the positioning accuracy is 0.04mm.
- Strong Compatibility: CR Touch is an automatic leveler specially designed for Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/CR-10 models, Only applicable to 32-bit V4.2.2 and V4.2.7 motherboards. The included 3 brackets can be easily installed on the above models.
- Package Includes: 1*CR Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4m Power Cord, 3*Tie Straps, 4*Screws. Download the firmware from the official website of Creality and copy it to the blank SD card, insert it into the card slot of the 3D printer, turn on the power, and the printer will read and install the firmware.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #19
Creality Ender-3 V3 KE 3D Printer, 500 mm/s High-Speed Printing with Auto-Leveling, Sprite Direct Extruder Supports 300 Printing, Smooth Detail, 220 220 250 mm Print Volume
Asin: B0CVVR6W27 | Model: Ender-3 V3 KE | PartNumber: Ender-3 V3 KE
Ultra-Smooth & Stable Motion: Ender-3 V3 Ke 3D Printer Robust Structure And Precision-Engineered Components Guarantee Smooth And Steady Movements. Upgraded The X-Axis Has A Carriage Slide Containing Ball Bearings, Yielding High-Quality Prints Every Time.
Hassle-Free Printing, User-Friendly: Creality 3D Printers Support Three Ways Of Printing, Phone Control, Wifi, And Usb Drive. Upgraded Easy To Install All-In-One Design, As Well As Filament Shift Sensor And Power Failure Recovery Function To To Save Time And Filament. Ideal 3D Printer Gift For Home, Beginners, Kids.
Precision-Focused Design: With Smart Algorithms Function, It Mitigates The Printer's Vibrations For Minimal Ringing Or Ghosting. Precise 0.1 Mm Printing Accuracy. Also Has Dual Fans For Fast Model Cooling, Making Your Prints Always In Good Shape.
Reliability & Versatile Printing: High Configuration Sprite Direct Extruder, 60W Ceramic Heater, Bi-Metal Heatbreak, And Copper Nozzle Enable 300℃ Printing And Smooth Feeding Of Various Filaments. Ender V3 Ke Can Handle Hyper Pla, Petg, Abs, Tpu(95A) And Asa Filaments.
Features
- Enhanced Faster & Smarter: Creality Ender 3 V3 KE can print at up to 500mm/s speed with 8000mm/s acceleration, lessening your waiting time. The intuitive touch UI screen and real-time model preview make your printing process smoother. Also features a CR Touch sensor for auto leveling, ensures accurate leveling of the build platform
- Reliability & Versatile Printing: High configuration Sprite Direct Extruder, 60W ceramic heater, Bi-metal heatbreak, and copper nozzle enable 300 printing and smooth feeding of various filaments. Ender V3 KE can handle Hyper PLA, PETG, ABS, TPU(95A) and ASA filaments
- Ultra-Smooth & Stable Motion: Ender-3 V3 KE 3d printer robust structure and precision-engineered components guarantee smooth and steady movements. Upgraded the X-axis has a carriage slide containing ball bearings, yielding high-quality prints every time
- Precision-focused Design: With smart algorithms function, it mitigates the printer's vibrations for minimal ringing or ghosting. Precise 0.1 mm Printing Accuracy. Also has dual fans for fast model cooling, making your prints always in good shape
- Hassle-free Printing, User-friendly: Creality 3D printers support three ways of printing, phone control, WiFi, and USB drive. Upgraded easy to install all-in-one design, as well as filament shift sensor and power failure recovery function to to save time and filament. Ideal 3D printer gift for home, beginners, kids
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.84 x 8.66 x 8.66 inches | Weight: 17.20 pounds
Warranty: 1 Years
See On Amazon #20
Creality Official Ender 3 V3 KE Ceramic Hotend Kit, Ender 3 V3 KE Ceramic Heating Block Kit, 300 C High Temperature Resistance Extruder Hot End, All Metal Thermal Conductivity Hotend Replacement
Asin: B0CRDQGR3F
Faster Printing Experience - Ender 3 V3 Ke Assembled Extruder Hot End Kit Has Been Assembled In Advance , All You Have To Do Is Plug In The Wires. Ender 3 V3 Ke 3D Printer Can Print At Up To 600Mm/S Speed , Faster Than Most Of Printers On The Market. You Can Complete Models Efficiently, Saving Time To Wait For Print Jobs..
All-Metal Design - Support 300℃ High Temperature Printing. Compatible With More Filaments, Such As Pla, Abs, Petg, Tpu, Pa, Pc, Pla-Cf, Pa-Cf, Pet-Cf, Etc..
Process Upgrades For Better Printing - The Throat Is Made Of Titanium Alloy, Thin-Walled And Thick Throat, Brings Excellent Heat Insulation Performance. A0.4 High Thermal Conductivity Uniform Heating - Ceramic Heating Ring For Improved Heating Efficiency And Faster Heat Transfer, More Uniform Heating..
Features
- Ender 3 V3 KE Ceramic Hotend Kit - 100% Creality official heating block kit, compatible for Creality Ender 3 V3 KE 3D Printer.
- High Thermal Conductivity Uniform Heating - Ceramic heating ring for improved heating efficiency and faster heat transfer, more uniform heating.
- Faster Printing Experience - Ender 3 V3 KE assembled extruder hot end kit has been assembled in advance , all you have to do is plug in the wires. Ender 3 V3 KE 3d printer can print at up to 600mm/s speed , faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs.
- Process Upgrades for Better Printing - The throat is made of titanium alloy, thin-walled and thick throat, brings excellent heat insulation performance. a0.4
- All-metal Design - Support 300 high temperature printing. Compatible with more filaments, such as PLA, ABS, PETG, TPU, PA, PC, PLA-CF, PA-CF, PET-CF, etc.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search