IdeaFormer-3D 3pcs Magnetic Build Surface (220 X 220mm) Flexible Removable Print Bed (2 pcs Print Surface + 1 pcs Base) for 3D Printer Hotbed(220x220), not Suitable for Ender 3 235mm Hotbed
Asin: B09B71PSJL | Model: HBD-MSK | PartNumber: HBD-MSK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: We Are Pc Material, Long-Term 80 Degrees. More Than 80℃ Of Magnetic Performance Will Weaken But Not Lose Magnetism, So Can Be Applied To Polylactic Acid And Other Filaments. Pc Material Flame Retardant, Wear-Resistant..
Please Do Not Allow The Heated Nozzle To Come Into Direct Contact With The A-Plate! For Ease Of Operation, The Desktop Is Heated To 50 Degrees C When The Model Is Taken, And Then The Model Is Taken..
Specification: Aab Three Sides In The Package, A Side Is Greater Than B Side (Actual Size Is B Side) Dimensions: 150X150/200X200/214X214/220X220/235X235/310X310mm..
Easy To Use: Can Be Installed On Hot Beds And Glass Platforms. Printing Is Not Warping. No Glue Is Required. Can Be Printed On A Cold Bed. The A-Plate Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model..
Features
- Features: The product includes three pieces of stickers(2pcs A plate and 1pcs B plate). It s surprising that our product is more 1pcs A plate than other brands. It can be reused and means that replacing the new A side is more time-saving. (The A plate is 5mm wider than the B plate)Kindly Tips:Our magnetic platform A and B must be used in pairs.
- Easy to use: Can be installed on hot beds and glass platforms. Printing is not warping. No glue is required. Can be printed on a cold bed. The A-plate is flexible and magnetic, making it easy to move off the platform and take away the printing model.
- Material: We are PC material, long-term 80 degrees. More than 80 of magnetic performance will weaken but not lose magnetism, so can be applied to polylactic acid and other filaments. PC material flame retardant, wear-resistant.
- Specification: AAB three sides in the package, A side is greater than B side (actual size is B side) dimensions: 150x150/200x200/214x214/220x220/235x235/310x310mm.
- Please do not allow the heated nozzle to come into direct contact with the A-plate! For ease of operation, the desktop is heated to 50 degrees C when the model is taken, and then the model is taken.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
Dimensions: 0.00 x 0.01 x 0.01 inches | Weight: 0.91 Pounds
See On Amazon Similar To IdeaFormer3D 3pcs Magnetic Build Surface
#1
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 Pounds
See On Amazon #2
IdeaFormer-3D Double Print Bed Smooth Carbon Fiber Style PET+ Textured PEI Spring Steel Sheet Bed Plate+ Magnetic Base for Anet A8/Wanhao Duplicator i3 and Other Same Sized Hot Bed
Asin: B0BG6T7N95 | Model: PET-PEO-DBS | PartNumber: PET-PEO-DBS
【Compatible Filaments】Pet Construction Surface Only Prints Pla Filaments; Pei Surface Panels Print Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon..
【After-Service】If You Have Any Question Or Need Technical Support About The Product, Please Press "Ask A Question" Through Our Storefront's Page, Report An Issue Through The “Your Orders” Page. We Will Respond With 24 Hours..
【Attention】Our Double-Sided Textured Pei+Pet Printing Plate Fits For 3D Printer With 220X220 Platform Size, Such As Mk2/Mk2a, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator I3, Monoprice Maker, Not Suitable For Ender 3 , 5 Etc. Please Confirm Your Printer Platform Size Before Ordering..
【High Durability】The Pet Printing Surface Is Resistant To High Temperatures Of 120°C And The Pei Coating Is 260°C..
Features
- Textured PEI + Carbon Fiber Style PET + Magnetic Build Plate PEI + PET double-sided printing platform, one side is a smooth PET platform, the underside of the printed model is smooth and the model is easy to remove and clean. The other side is PEI frosted surface, the frosted sticker surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping.
- High Durability The PET printing surface is resistant to high temperatures of 120 C and the PEI coating is 260 C.
- Compatible filaments PET construction surface only prints PLA filaments; PEI surface panels print most filaments such as PLA / ABS / PETG / TPU / nylon.
- Attention Our double-sided textured PEI+PET printing plate fits for 3D printer with 220x220 platform size, such as MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker, NOT suitable for Ender 3 , 5 etc. Please confirm your printer platform size before ordering.
- After-Service If you have any question or need technical support about the product, Please press Ask a question through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #3
TIOPY 3D Printer Build Surface Set 310x310mm,2 Pcs Magnetic Build Plate +1Pcs Magnetic Adhesive Base,Flexible Removable Magnetic Hot Bed Sticker,for Ender 3 Max/3 Max Neo/Ender3 S1 Plus
Asin: B0BHSNH6FH | Model: PC MAG 310 | PartNumber: PC MAG 310
✅【 Adhesive Print Bed】Our Magnetic Build Surface Has A Great Adhesion For Pla And Tpu Filament When The Temperature Of The Heat Bed Is About 50℃.
✅【Warm Note】You Should Relevel The Print Platform Because The Different Sizes Of Print Bed. A Hot Printer Nozzle Will Damage The Print Surface. A Little Gap Between The Nozzle And The Surface When You Leveling The Platform Will Be Perfect, Which Provides A Good Adhesion While Making It Easier To Remove The Printed Models..
✅【Easy To Use】Simply Stick The Bottom Sheet Onto Your Hot Bed, Then The Magnetic Surface Can Be Easily Attached To The Bottom And Removed..
✅【Applicable Printers】 310X310mm / 12.2*12.2 Inch. Compatible With Artillery Sw-X1, Sw-X2, Cr-10, Cr-10S, Cr-10S Pro, Cr-10 V2, V3, Tevo Tornado, Nereus, Anet E12/E16 A8plus/Et5 Serie Etc. Plz Make Sure The Size Of Your Printer Heated Bed Before You Buy It, There Are Items Of Different Sizes Available.And You Can Also Cut To Any Size As U Want.And You Can Also Cut To Any Size As 220X210mm, 6.5"X6.5" And More U Want..
Features
- Magnetic 3d Print Mats Set With a replacement plate:There are 2pcs print surface and 1pc base plate of this item, which provides twice the service life and saves you money.
- Applicable printers 310x310mm / 12.2*12.2 inch. Compatible with Artillery SW-X1, SW-X2, CR-10, CR-10S, CR-10S pro, CR-10 V2, V3, Tevo Tornado, Nereus, ANET E12/E16 A8PLUS/ET5 Serie etc. Plz make sure the size of your printer heated bed before you buy it, there are items of different sizes available.And you can also cut to any size as u want.And you can also cut to any size as 220x210mm, 6.5x6.5 and more u want.
- Adhesive print bed Our magnetic build surface has a great adhesion for PLA and TPU filament when the temperature of the heat bed is about 50
- Easy to use Simply stick the bottom sheet onto your hot bed, then the magnetic surface can be easily attached to the bottom and removed.
- Warm note You should relevel the print platform because the different sizes of print bed. A hot printer nozzle will damage the print surface. A little gap between the nozzle and the surface when you leveling the platform will be perfect, which provides a good adhesion while making it easier to remove the printed models.
- See more on Amazon...
Brand: TIOPY | Manufacturer: TIOPY
Dimensions: 0.12 x 12.20 x 12.20 inches
See On Amazon #4
SOOWAY 3D Printer Flexible Removable Magnetic Build Surface Hotbed Sticker Magnetic Platform with Calibration Build Surface Sticker(235mm)
Asin: B089KDSDY2 | Ean: 0791541319736 | UPC: 791541319736
Brand: SOOWAY | Manufacturer: SOOWAY
See On Amazon #5
Creality Original Build Surface Plate Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro/Ender 5 3D Printer 235X235MM
Asin: B0BHY5J417 | Model: Removable Magnetic Build Surface 235X235 | PartNumber: Removable Magnetic Build Surface 235X235 | Ean: 0671891705437 | UPC: 671891705437
【Durability】This Magnetic Bed Has Strong Flexibility And Heat Resistance Up To 70 ℃ Without Degauss. Wear-Resistant, Scratch-Resistant, Stain-Resistant, Hand-Sweat Resistant, Can Be Used Repeatedly..
【Universal】With 235Mm X 235Mm Size, This 3D Printer Kit Is Suitable For All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds. Applicable Materials: Pla, Abs, Tpu, Nylon Etc..
【Simple Installation】Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Simply Place The Top Layer Of Flexible Magnetic Build Surface On Top And It Will Be Firmly Attached To The Printer..
Features
- Easy Model Removal This surface is flexible and models can be easily removed. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- Simple Installation Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Simply place the top layer of flexible magnetic Build surface on top and it will be firmly attached to the printer.
- Durability This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.
- Universal With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, ABS, TPU, nylon etc.
- See more on Amazon...
Brand: FDMLLCD | Manufacturer: FDMLLCD
See On Amazon
Looking For Something Else?
Search