HAPPYMODEL 2.4G ExpressLRS ELR ES24TX Slim Pro TX Module Compatible with X-lite Tango2
Asin: B09FXXTHK6 | Model: Z44889 | PartNumber: Z44889
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Slim Pro Module Comes With An Aluminum Alloy Shell And Is Equipped With A Cooling Fan That Automatically Works When The Module Is Working At 250M-W. Antenna Gain: 1.87Dbi..
Can Updated By Expresslrs Configurator Or Update The Firmware Via Connecting The Wifi Hot Spot Of The ?Expresslrs Tx Module?, Visit "10.0.0.1" By Browser (Password:Expresslrs)..
Open Source Expresslrs; Long Range, Low Latency And High Re-Flashed Rates; Telemetry Data Transmission Supported..
Supports Up To 1000M-W Rf Power (T-Lite Radio And Tango2 Radio Need External Power Supply) , Very Useful For Long Range Fpv..
Features
- The ES24TX Slim Pro Module Pre-load the ExpressLRS firmware and it?s plug and play, compatible with Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
- Supports up to 1000m-W RF power (T-lite radio and Tango2 radio need external power supply) , very useful for Long Range FPV.
- This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250m-W. Antenna gain: 1.87dBi.
- Open source ExpressLRS; Long range, Low latency and High re-flashed Rates; Telemetry data transmission supported.
- Can updated by ExpressLRS configurator or update the firmware via connecting the Wifi hot spot of the ?ExpressLRS TX Module?, visit 10.0.0.1 by browser (password:expresslrs).
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon Similar To HAPPYMODEL 2.4G ExpressLRS ELR ES24TX
#1
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP2RX)
Asin: B092J1VP6S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165333 | UPC: 700512165333
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
The Pp Rx Is Designed By @Jye Smith From Expresslrs Development Team. Its Main Hardware Architecture Is Stm32l432kbu6 Mcu And Sx1280 Rf Chip. It Has A Built-In Ceramic Antenna, Which Is Super Light And Small In Size..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #2
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX)
Asin: B092J2QJ8S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165326 | UPC: 700512165326
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #3
HappyModel ELRS Module ES24TX Pro 1000mW 2.4G ExpressLRS Micro TX Module RGB LED Module for TX16S, QX7, TX12, X9D Transmitter Remote Control Drone Remote Accessories
Asin: B09MQHJSBB | Model: ES24TX Pro | PartNumber: ES24TX Pro | Ean: 0755454783022 | UPC: 755454783022
Note: This Micro Tx Module Support Most Of The Opentx Radio Transmitter Remote Controller That With Micro Jr Bay, Such As Tx16s, Tx12, Taranis X9d.
Please Make Sure The Applicability Before Purchasing, We Are Always Here To Assist..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- Note: This Micro TX module support most of the OpenTX radio transmitter remote controller that with Micro JR bay, such as TX16S, TX12, Taranis X9D
- Please make sure the Applicability before purchasing, we are always here to assist.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HappyModel
See On Amazon #4
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP1 RX)
Asin: B095JQ8F9J | Model: ELRS | PartNumber: ELRS | Ean: 0700512167825 | UPC: 700512167825
Peak-Gain Difference: Ep2 _Rx Is 3.7Db, While Ep1_Rx Is 2.23Db..
Elrs Receiver Comfortable With Racing, Long Range Dorne And Tinywhoop, As They Are Lightweight , Nano Size, And With Low-Latency And High-Refresh-Rate Rf Module..
Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6Mm, Sx1280imltrt Rf Module, Receive Refresh Rate: 25- 500, Type: Ism..
Mcu: Ep1 / Ep2_Rx With Esp8285 Mcu. Frequency Range: 2400 To 2500..
Features
- The Happymodel 2-4G ELRS nano series receiver is an open source program based on ExpressLRS, pre-loaded firmware are all beta versions.
- MCU: EP1 / EP2_RX with ESP8285 MCU. Frequency Range: 2400 to 2500.
- Peak-Gain Difference: EP2 _RX is 3.7dB, while EP1_RX is 2.23dB.
- Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6mm, SX1280IMLTRT RF Module, Receive Refresh Rate: 25- 500, Type: ISM.
- ELRS Receiver Comfortable with racing, long range dorne and tinywhoop, as they are lightweight , Nano size, and with Low-latency and high-refresh-rate RF module.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #5
HAPPYMODEL 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output (ExpressLRS)
Asin: B0CB555NDT | Ean: 0647625053716 | UPC: 647625053716
Compact And Lightweight Design: The Mini Micro Epw6 Pwm Output Receiver Is Designed With A Compact And Lightweight Form Factor, Making It Suitable For Various Drone And Rc Model Configurations. Its Small Size Does Not Compromise Its Performance, Providing A Convenient Solution Without Adding Unnecessary Weight To Your Aircraft..
Package Contents: 2 X 2.4Ghz Antenna 1X 6Pin 2.54Mm.
Expresslrs Compatibility: This Receiver Module Is Fully Compatible With Expresslrs, An Open-Source Long-Range Radio System. By Utilizing The Power Of Expresslrs, You Gain Access To Features Such As Low Latency, Fast Data Transmission, And Extensive Configurability, Enhancing The Overall Control And Responsiveness Of Your Flying Experience..
Reliable And Extended Range: Experience A Reliable And Extended Control Range With The Happymodel Elrs Receiver. It Provides A Strong And Stable Signal Connection, Minimizing The Risk Of Signal Loss And Ensuring Consistent Control Over Your Drone Or Rc Model Even At Longer Distances..
Features
- Versatile Compatibility: The Happymodel 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output is compatible with a wide range of flight controllers and devices that support PWM signal input. This compatibility ensures seamless integration into your existing setup, allowing for easy and convenient installation.
- Reliable and Extended Range: Experience a reliable and extended control range with the Happymodel ELRS Receiver. It provides a strong and stable signal connection, minimizing the risk of signal loss and ensuring consistent control over your drone or RC model even at longer distances.
- Compact and Lightweight Design: The Mini Micro EPW6 PWM Output Receiver is designed with a compact and lightweight form factor, making it suitable for various drone and RC model configurations. Its small size does not compromise its performance, providing a convenient solution without adding unnecessary weight to your aircraft.
- ExpressLRS Compatibility: This receiver module is fully compatible with ExpressLRS, an open-source long-range radio system. By utilizing the power of ExpressLRS, you gain access to features such as low latency, fast data transmission, and extensive configurability, enhancing the overall control and responsiveness of your flying experience.
- Package Contents: 2 x 2.4GHz antenna 1x 6pin 2.54mm
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
Weight: 0.03 pounds
See On Amazon #6
HAPPYMODEL ExpressLRS Micro TX Module ELRS Long Range ES900TX ES900RX 915Mhz 868MHz Compatible with Radiomaster TX16S Jumper T12 T16 T18 FPV Micro Long Range Drones (ES900TX 915MHz)
Asin: B09M37ZH35 | Model: Z45140-D4 | PartNumber: Z45140-D4
New Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Transmitter Module To Operate Stably Under High Power Conditions..
Features
- The module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the transmitter module to operate stably under high power conditions.
- New ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #7
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP1 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5Z9FZGZ | Ean: 0755621760252 | UPC: 755621760252
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #8
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP2 RX)
Asin: B095JQXCZ3 | Model: ELRS | PartNumber: ELRS | Ean: 0700512167832 | UPC: 700512167832
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #9
Happymodel ExpressLRS FPV Long Range Module ELRS ES900TX 915MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (ES900TX+ES900RX Combo Kit)
Asin: B0CKZ2F29V | Ean: 0755621759959 | UPC: 755621759959
The Elrs Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Happymodel Transmitter Module To Operate Stably Under High Power Conditions..
Features
- This ELRS module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the happymodel transmitter module to operate stably under high power conditions.
- The ELRS ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: HAPPYMODEL
Dimensions: 1.00 x 5.00 x 4.00 Inches
See On Amazon #10
HAPPYMODEL ES24TX Pro ELRS Micro TX Module 2.4G 1000mW with Cooling Fan RGB LED for FPV Drones
Asin: B09M71SSTS | Model: ZZ45639 | PartNumber: ZZ45639 | Ean: 0768432292140 | UPC: 768432292140
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V..
Customized Antenna: Happymodel 2.4Ghz Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version?This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000mw, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2.4GHz Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
Dimensions: 1.20 x 5.51 x 5.11 inches
See On Amazon
Looking For Something Else?
Search