HappyModel ELRS Module ES24TX Pro 1000mW 2.4G ExpressLRS Micro TX Module RGB LED Module for TX16S, QX7, TX12, X9D Transmitter Remote Control Drone Remote Accessories
Asin: B09MQHJSBB | Model: ES24TX Pro | PartNumber: ES24TX Pro | Ean: 0755454783022 | UPC: 755454783022
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Note: This Micro Tx Module Support Most Of The Opentx Radio Transmitter Remote Controller That With Micro Jr Bay, Such As Tx16s, Tx12, Taranis X9d.
Please Make Sure The Applicability Before Purchasing, We Are Always Here To Assist..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- Note: This Micro TX module support most of the OpenTX radio transmitter remote controller that with Micro JR bay, such as TX16S, TX12, Taranis X9D
- Please make sure the Applicability before purchasing, we are always here to assist.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HappyModel
See On Amazon Similar To HappyModel ELRS Module ES24TX Pro
#1
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP2RX)
Asin: B092J1VP6S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165333 | UPC: 700512165333
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
The Pp Rx Is Designed By @Jye Smith From Expresslrs Development Team. Its Main Hardware Architecture Is Stm32l432kbu6 Mcu And Sx1280 Rf Chip. It Has A Built-In Ceramic Antenna, Which Is Super Light And Small In Size..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #2
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP1 RX)
Asin: B095JQ8F9J | Model: ELRS | PartNumber: ELRS | Ean: 0700512167825 | UPC: 700512167825
Peak-Gain Difference: Ep2 _Rx Is 3.7Db, While Ep1_Rx Is 2.23Db..
Elrs Receiver Comfortable With Racing, Long Range Dorne And Tinywhoop, As They Are Lightweight , Nano Size, And With Low-Latency And High-Refresh-Rate Rf Module..
Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6Mm, Sx1280imltrt Rf Module, Receive Refresh Rate: 25- 500, Type: Ism..
Mcu: Ep1 / Ep2_Rx With Esp8285 Mcu. Frequency Range: 2400 To 2500..
Features
- The Happymodel 2-4G ELRS nano series receiver is an open source program based on ExpressLRS, pre-loaded firmware are all beta versions.
- MCU: EP1 / EP2_RX with ESP8285 MCU. Frequency Range: 2400 to 2500.
- Peak-Gain Difference: EP2 _RX is 3.7dB, while EP1_RX is 2.23dB.
- Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6mm, SX1280IMLTRT RF Module, Receive Refresh Rate: 25- 500, Type: ISM.
- ELRS Receiver Comfortable with racing, long range dorne and tinywhoop, as they are lightweight , Nano size, and with Low-latency and high-refresh-rate RF module.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #3
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP2 RX)
Asin: B095JQXCZ3 | Model: ELRS | PartNumber: ELRS | Ean: 0700512167832 | UPC: 700512167832
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #4
HAPPYMODEL 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output (ExpressLRS)
Asin: B0CB555NDT | Ean: 0647625053716 | UPC: 647625053716
Compact And Lightweight Design: The Mini Micro Epw6 Pwm Output Receiver Is Designed With A Compact And Lightweight Form Factor, Making It Suitable For Various Drone And Rc Model Configurations. Its Small Size Does Not Compromise Its Performance, Providing A Convenient Solution Without Adding Unnecessary Weight To Your Aircraft..
Package Contents: 2 X 2.4Ghz Antenna 1X 6Pin 2.54Mm.
Expresslrs Compatibility: This Receiver Module Is Fully Compatible With Expresslrs, An Open-Source Long-Range Radio System. By Utilizing The Power Of Expresslrs, You Gain Access To Features Such As Low Latency, Fast Data Transmission, And Extensive Configurability, Enhancing The Overall Control And Responsiveness Of Your Flying Experience..
Reliable And Extended Range: Experience A Reliable And Extended Control Range With The Happymodel Elrs Receiver. It Provides A Strong And Stable Signal Connection, Minimizing The Risk Of Signal Loss And Ensuring Consistent Control Over Your Drone Or Rc Model Even At Longer Distances..
Features
- Versatile Compatibility: The Happymodel 2.4GHz ELRS Receiver Mini Micro EPW6 PWM Output is compatible with a wide range of flight controllers and devices that support PWM signal input. This compatibility ensures seamless integration into your existing setup, allowing for easy and convenient installation.
- Reliable and Extended Range: Experience a reliable and extended control range with the Happymodel ELRS Receiver. It provides a strong and stable signal connection, minimizing the risk of signal loss and ensuring consistent control over your drone or RC model even at longer distances.
- Compact and Lightweight Design: The Mini Micro EPW6 PWM Output Receiver is designed with a compact and lightweight form factor, making it suitable for various drone and RC model configurations. Its small size does not compromise its performance, providing a convenient solution without adding unnecessary weight to your aircraft.
- ExpressLRS Compatibility: This receiver module is fully compatible with ExpressLRS, an open-source long-range radio system. By utilizing the power of ExpressLRS, you gain access to features such as low latency, fast data transmission, and extensive configurability, enhancing the overall control and responsiveness of your flying experience.
- Package Contents: 2 x 2.4GHz antenna 1x 6pin 2.54mm
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
Weight: 0.03 Pounds
See On Amazon #5
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP1 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5Z9FZGZ | Ean: 0755621760252 | UPC: 755621760252
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 Inches
See On Amazon #6
HAPPYMODEL ExpressLRS Micro TX Module ELRS Long Range ES900TX ES900RX 915Mhz 868MHz Compatible with Radiomaster TX16S Jumper T12 T16 T18 FPV Micro Long Range Drones (ES900TX 915MHz)
Asin: B09M37ZH35 | Model: Z45140-D4 | PartNumber: Z45140-D4
New Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Transmitter Module To Operate Stably Under High Power Conditions..
Features
- The module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the transmitter module to operate stably under high power conditions.
- New ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #7
HAPPYMODEL ES24TX Pro ELRS Micro TX Module 2.4G 1000mW with Cooling Fan RGB LED for FPV Drones
Asin: B09M71SSTS | Model: ZZ45639 | PartNumber: ZZ45639 | Ean: 0768432292140 | UPC: 768432292140
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V..
Customized Antenna: Happymodel 2.4Ghz Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version?This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000mw, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2.4GHz Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
Dimensions: 1.20 x 5.51 x 5.11 Inches
See On Amazon #8
Happymodel ExpressLRS FPV Long Range Module ELRS ES900TX 915MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (ES900TX+ES900RX Combo Kit)
Asin: B0CKZ2F29V | Ean: 0755621759959 | UPC: 755621759959
The Elrs Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Happymodel Transmitter Module To Operate Stably Under High Power Conditions..
Features
- This ELRS module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the happymodel transmitter module to operate stably under high power conditions.
- The ELRS ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: HAPPYMODEL
Dimensions: 1.00 x 5.00 x 4.00 inches
See On Amazon #9
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP2 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5ZXDQZN | Ean: 0755621760221 | UPC: 755621760221
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #10
Happymodel ES900 Dual RX ELRS ExpressLRS Diversity Receiver Iong Range Receiver for Micro Carbon Fiber FPV Racing Quadcopter Quad Frame kit RC Drone Frame Tiny Whoop (915MHz)
Asin: B0CKYGX7Q7 | Ean: 0735980953519 | UPC: 735980953519
Built-In A Tcxo (Temperature Compensated Crystal Oscillator) , Improved Frequency Stability Over Temperature: The Most Significant Benefit Is The Improvement In Frequency Stability Over A Wide Range Of Temperatures. While Standard Crystal Oscillators Can Drift In Frequency As The Temperature Changes, A Tcxo Is Designed To Compensate For This Drift..
Package Includes: 1 X Happymodel Es900 Dual Rx Elrs Diversity 915Mhz Long Range Receiver, 2 X Antennas.
Ultra-Compact & Lightweight: Designed With A Pcb Size Of Just 21.5Mm X 16Mm And A Feather-Light Weight Of 1.5 Grams (Excluding Antenna)..
Low Latency And High Refresh Rate, They Are Very Suitable For Fpv Racing And Long Range Fpv Cruising While Being Ultra-Light And Ultra-Small, Making Them Very Suitable For Tinywhoop..
Features
- True Diversity System: Features a genuine dual RX ELRS system for unmatched signal integrity and reception reliability. Perfect addition to any quadcopter or drone. With its advanced 915MHz radio frequency technology, it provides superior signal quality and lower latency. Enjoy a reliable, crystal-clear connection with the ES900 dual receiver.
- Low latency and high refresh rate, they are very suitable for FPV racing and long range FPV cruising while being ultra-light and ultra-small, making them very suitable for Tinywhoop.
- Built-in a TCXO (temperature compensated crystal oscillator) , Improved Frequency Stability Over Temperature: The most significant benefit is the improvement in frequency stability over a wide range of temperatures. While standard crystal oscillators can drift in frequency as the temperature changes, a TCXO is designed to compensate for this drift.
- Ultra-Compact & Lightweight: Designed with a PCB size of just 21.5mm x 16mm and a feather-light weight of 1.5 grams (excluding antenna).
- Package includes: 1 x Happymodel ES900 DUAL RX ELRS Diversity 915MHz Long Range Receiver, 2 x antennas
- See more on Amazon...
Brand: Usmile | Manufacturer: Happymodel
Dimensions: 0.20 x 0.85 x 0.63 inches
See On Amazon #11
HAPPYMODEL 2.4G ExpressLRS ELR ES24TX Slim Pro TX Module Compatible with X-lite Tango2
Asin: B09FXXTHK6 | Model: Z44889 | PartNumber: Z44889
This Slim Pro Module Comes With An Aluminum Alloy Shell And Is Equipped With A Cooling Fan That Automatically Works When The Module Is Working At 250M-W. Antenna Gain: 1.87Dbi..
Can Updated By Expresslrs Configurator Or Update The Firmware Via Connecting The Wifi Hot Spot Of The ?Expresslrs Tx Module?, Visit "10.0.0.1" By Browser (Password:Expresslrs)..
Open Source Expresslrs; Long Range, Low Latency And High Re-Flashed Rates; Telemetry Data Transmission Supported..
Supports Up To 1000M-W Rf Power (T-Lite Radio And Tango2 Radio Need External Power Supply) , Very Useful For Long Range Fpv..
Features
- The ES24TX Slim Pro Module Pre-load the ExpressLRS firmware and it?s plug and play, compatible with Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
- Supports up to 1000m-W RF power (T-lite radio and Tango2 radio need external power supply) , very useful for Long Range FPV.
- This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250m-W. Antenna gain: 1.87dBi.
- Open source ExpressLRS; Long range, Low latency and High re-flashed Rates; Telemetry data transmission supported.
- Can updated by ExpressLRS configurator or update the firmware via connecting the Wifi hot spot of the ?ExpressLRS TX Module?, visit 10.0.0.1 by browser (password:expresslrs).
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #12
HAPPYMODEL ES24TX Pro 2-4G ExpressLRS ELRS Micro TX Module with Cooling Fan RGB LED Module for DIY RC Drone
Asin: B092ZPSG53 | Ean: 0030391997153 | UPC: 030391997153
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25 - 500, Power Supply Voltage: 5V~10V..
Customized Antenna: Happymodel 2-4G Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version: This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2-4G Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25 - 500, Power Supply Voltage: 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #13
HAPPYMODEL CrazyF405HD ELRS 1-2S AIO Flight Controller 12A ESC for Digital HD Bwhoop Toothpick DIY FPV Drone
Asin: B00137U7T8 | Ean: 0086972526922 | UPC: 086972526922
Item Name: Crazyf405hd Elrs 1-2S Aio Flight Controller, Mount Size: 25.5Mmx25.5Mm.
The Flight Controller Uses The F405 Chip, Supports Betaflight/Inav Firmware, Has 3 Sets Of Complete Uarts Available, And Integrates A Bmp280 Barometerand 8Mbp Blackbox, Which Greatly Enhances The Playability Of The Flight Controller..
Features
- A flight controller with a built-in Serial ELRS receiver and 4-IN-1 Blheli_S 12A ESC specially developed for Digital HD FPV, which removes the analog OSD chip 7456, optimizes the PCB layout, and supports 1-2S Lipo/LiHV lithium batteries, very Suitable for Digital HD Tinywhoop/Cinewhoop/Toothpick and other small FPV drones.
- The flight controller uses the F405 chip, supports Betaflight/INAV firmware, has 3 sets of complete UARTs available, and integrates a BMP280 barometerand 8Mbp blackbox, which greatly enhances the playability of the flight controller.
- Item Name: CrazyF405HD ELRS 1-2S AIO Flight controller, Mount size: 25.5mmx25.5mm
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #14
HAPPYMODEL ExpressLRS FPV ELRS ES900TX ES900RX 915MHz/868MHz Long Range Module for Radiomaster TX16S Micro Mini Long Range Drone (915MHZ ES900 RX)
Asin: B09X2PBSRB | Ean: 0086972526236 | UPC: 086972526236
2.Insert The Es900tx Or Es915tx Module To Radio Transmitter, And Choose External Rf Mode To Crsf Protocol, Then You Can Find Elrs Menu From The Radio Systems, Enter Into Elrs And Press [Bind], The Red Led On The Es900rx Module Will Turning Off Then Start Blinking Slowly And Finally Getting To Be Solid , This Means Bind Successfully..
2.Visit The Firmware Update Website By Enter ?10.0.0.1? , And Choose The Correct Firmware Then Click ?Update? , Wait For Around 1~2 Minutes, The Update Progress Would Finished And You Can Find ?Firmware Update Successful And Reboot? , That Means Update Is Finished..
Es900rx Firmware Update By Wifi Procedure: 1.Make The Es900rx Enter Into Bind Mode And Then Wait Around 1 Minute And Don?T Bind With It , Then The Es900rx Would Get Into Wifi Mode Automatically, You Could Connected The Wifi Hot Pot ?Expresslrs Rx? By Enter The Password ?Expresslrs?.
Bind Procedure: 1.Supply Power To The Es900rx, Wait Until The Red Led On The Es900rx Are Off, Immediately Turn Off The Power, And Then Repeat Again The Above Steps. When The Es900rx Is Powered On For The Third Time, The Red Led Light Will Start To Double Flash Quickly, Which Means That The Es900rx Enters The Binding Mode.
Features
- Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module?ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the new target for ES900TX and ES900RX soon.
- Bind procedure: 1.Supply power to the ES900RX, wait until the red LED on the ES900RX are off, immediately turn off the power, and then repeat again the above steps. When the ES900RX is powered on for the third time, the red LED light will start to double flash quickly, which means that the ES900RX enters the binding mode
- 2.Insert the ES900TX or ES915TX module to Radio transmitter, and choose External RF mode to CRSF protocol, then you can find ELRS menu from the Radio systems, Enter into ELRS and press [Bind], the Red LED on the ES900RX module will turning off then start blinking slowly and finally getting to be solid , this means bind successfully.
- ES900RX firmware update by wifi procedure: 1.Make the ES900RX enter into Bind mode and then wait around 1 minute and don?t bind with it , then the ES900RX would get into Wifi mode automatically, you could connected the wifi hot pot ?ExpressLRS RX? by enter the password ?expresslrs?
- 2.Visit the firmware update website by enter ?10.0.0.1? , and choose the correct firmware then click ?update? , wait for around 1~2 minutes, the update progress would finished and you can find ?firmware update successful and reboot? , that means update is finished.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #15
HAPPYMODEL ExpressLRS FPV Long Range Module ELRS ES900TX 915MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (915MHZ ES900TX)
Asin: B09J8BJTSP | Model: MC45140-D4-D5 | PartNumber: MC45140-D4-D5 | Ean: 0757842238817 | UPC: 757842238817
The Module Is Compatible With Most Opentx Remote Controllers, Especially Suitable For Radiomaster Tx16s And Jumper T12 T16 T18 Series Remote Controllers, Basically Plug And Play. We Have Specially Customized The Heat Sink For The Transmitter Module, And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Transmitter Module To Operate Stably Under High Power Conditions..
Wifi Update Firmware Function For Es900tx Would Be Available In A Short Time.Rc7 Firmware For Es900rx Download:Expresslrs Rc7 Firmware For Es900 Rx 915Mhz And 868Mhz [Update By Wifi].
New Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw.As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Es900tx And Es900rx Modules Are A Set Of Long Range 915Mhz/868Mhz(Optional) Wireless Transmission Equipment Developed And Designed Based On The Open Source Software Expresslrs. This Set Of Modules Is Characterized By Ultra-Long Range, Stable Operation And Low Latency..
Features
- Notice: The New version ExpressLRS hardware 868MHz/900MHz TX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the new target for ES900TX and ES900RX soon.
- ES900TX and ES900RX modules are a set of Long Range 915MHz/868MHz(optional) wireless transmission equipment developed and designed based on the open source software ExpressLRS. This set of modules is characterized by ultra-long range, stable operation and low latency.
- The module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play. We have specially customized the heat sink for the transmitter module, and also reserve the installation position of the 2006 fan which can help the transmitter module to operate stably under high power conditions.
- New ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mw.As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Wifi update firmware function for ES900TX would be available in a short time.RC7 Firmware for ES900RX download:ExpressLRS RC7 firmware for ES900 RX 915MHz and 868MHz [update by wifi]
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #16
HAPPYMODEL DiamondF4 ELRS/FRSKY AIO 5in1 Flight Controller Built-in 400mW OPENVTX for RC Bwhoop Mobeetle6 Drone (ELRS SPI RX)
Asin: B0B49MN5RM | Ean: 0086972526595 | UPC: 086972526595
Onboard Elrs V2.0 Receiver Version: Packet Rate Option: 50Hz/150Hz/250Hz/500Hz Expresslrs Firmware Version: V2.0 Rf Frequency: 2.4Ghz Antenna : Enameled Copper Wire Antenna Telemetry Output Power: <12Dbm Receiver Protocol: Spi Expresslrs Compatible With Expresslrs V2.0 Tx Module Couldn?T Flash Separately Expresslrs Firmware.
Onboard Frsky Spi D8 Receiver Version: Spi Bus Receiver Frsky D8 Compatible Compatible Non Eu Transmitter D8 Modelchannels: 8Ch Failsafe Support No Ground Interference ( Transmitter And Receiver 1 M From The Ground): 200M~300M.
Onboard 4In1 Esc: Mcu Upgraded To Efm8bb21 Power Supply: 1S Lipo/Lipo Hvcurrent: 5A Continuous Peak 6A (3 Seconds) Support Blhelisuite Programmable Factory Firmware: O_H_5_Rev16_8.Hex Default Protocol: Dshot600.
Features
- Flight controller: (ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280 (Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G OPEN VTX Built-in SPI ELRS V2.0/Frsky receiver Built-in 5V 1A BEC
- Onboard 4in1 ESC: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT600
- Onboard ELRS V2.0 receiver Version: Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn?t flash separately ExpressLRS firmware
- Onboard Frsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #17
HAPPYMODEL TBS Power Adapter Plug-and-Play Compatible with Transmitter Tango 2, ES24TX Slim Pro, ES24TX Pro RF Module Up to 1000mW
Asin: B09PDMSFR6 | Model: Z46107 | PartNumber: Z46107
Tbs Power Adapter Part 1: Which Is A Pcb Board Directly Glued To The Back Of The Main Board Of The Tango2..
Plug-And-Play Design: The Overall Replacement Does Not Need To Be Soldered, So Convenient To Plug-And-Play. Just Careful During The Modification Process..
Tbs Power Adapter Part 2: Another Pcb With Pins That Directly Replaces The Original External Expansion Module..
Up To 1000Mw: Can Run An External Tx Module Such As Es24tx Slim Pro And Es24tx Pro Normally And Smoothly..
Features
- TBS Power adapter: Compatible with Transmitter Tango 2, ES24TX Slim Pro, ES24TX Pro RF Module.
- Up To 1000mW: Can run an external TX module such as ES24TX Slim Pro and ES24TX Pro normally and smoothly.
- TBS Power adapter Part 1: Which is a PCB board directly glued to the back of the main board of the Tango2.
- TBS Power adapter Part 2: Another PCB with pins that directly replaces the original external expansion module.
- Plug-and-Play Design: The overall replacement does not need to be soldered, so convenient to plug-and-play. Just careful during the modification process.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #18
HAPPYMODEL ExpressLRS FPV Long Range Module ELRS ES900TX ES900RX 915MHz/868MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (915MHZ ES900 RX)
Asin: B09J539YQZ | Model: MC45140-D5 | PartNumber: MC45140-D5 | Ean: 0054114641048 | UPC: 054114641048
The Module Is Compatible With Most Opentx Remote Controllers, Especially Suitable For Radiomaster Tx16s And Jumper T12 T16 T18 Series Remote Controllers, Basically Plug And Play. We Have Specially Customized The Heat Sink For The Transmitter Module, And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Transmitter Module To Operate Stably Under High Power Conditions..
Wifi Update Firmware Function For Es900tx Would Be Available In A Short Time.Rc7 Firmware For Es900rx Download:Expresslrs Rc7 Firmware For Es900 Rx 915Mhz And 868Mhz [Update By Wifi].
New Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw.As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Es900tx And Es900rx Modules Are A Set Of Long Range 915Mhz/868Mhz(Optional) Wireless Transmission Equipment Developed And Designed Based On The Open Source Software Expresslrs. This Set Of Modules Is Characterized By Ultra-Long Range, Stable Operation And Low Latency..
Features
- Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module-ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the new target for ES900TX and ES900RX soon.
- ES900TX and ES900RX modules are a set of Long Range 915MHz/868MHz(optional) wireless transmission equipment developed and designed based on the open source software ExpressLRS. This set of modules is characterized by ultra-long range, stable operation and low latency.
- The module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play. We have specially customized the heat sink for the transmitter module, and also reserve the installation position of the 2006 fan which can help the transmitter module to operate stably under high power conditions.
- New ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mw.As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Wifi update firmware function for ES900TX would be available in a short time.RC7 Firmware for ES900RX download:ExpressLRS RC7 firmware for ES900 RX 915MHz and 868MHz [update by wifi]
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #19
HAPPYMODEL ExpressLRS ES900TX Transmitter Module
Asin: B093593GQS | Ean: 0736952008657 | UPC: 736952008657
Features
- The ES900TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES900TX is characterized by ultra-long-range, stable operation, and low latency. This module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers - basically plug and play. The heat sink has been specially customized for the transmitter module, which can help the t
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.20 Pounds
See On Amazon
Looking For Something Else?
Search