Premium Quality Brand Stabilus Tailgate Lift Support Compatible With 2019-2017, Nissan Titan + more
Asin: B09MDKXJFQ | Model: 5B-945284 | PartNumber: 5B-945284 | Ean: 0194879018577, 0194879040097 | UPC: 194879040097, 194879018577
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extended Length [In] 14,96, Force [N] 1150.
Easy To Install In Just Minutes And No Special Tools Required For Installation.
Fit For 2019 - 2017, Nissan Titan, 2019 - 2016, Nissan Titan Xd.
Features
- Made in Mexico - Produced and Supplied to Automotive Manufacturer. Same performance and quality specifications. Exact replacement engineered for this application. Original opening and closing control of your hood, hatch or trunk.
- Fit for 2019 - 2017, Nissan Titan, 2019 - 2016, Nissan Titan XD
- Extended Length [in] 14,96, Force [N] 1150
- Easy to install in just minutes and no special tools required for installation
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 1.00 x 14.96 x 1.50 inches
Warranty: 2 year manufacturer
See On Amazon Similar To Premium Quality Brand Stabilus Tailgate
#1
C1608055 19.7 inch 120Lbs Shock Struts for are Leer Truck Bed Tonneau Cover RV Bed Lift Camper Shell, Shed Window Floor Hatch Door, and Other DIY Applications, Set of 2 Vepagoo.
Asin: B078T6SCW8 | Model: vepa0205A | PartNumber: vepa0205A | Ean: 0603728610836 | UPC: 603728610836
[Need Know] If You Used These Gas Shocks As A Replacement For The Truck Tonneau Cover Or Trailer Cover, You Have To Compare The Length Of Your Original Gas Spring' Compression And Extension, Type Of Connector, And Lift Capability Before Purchasing..
[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
[Tips] 120Lb Per Strut, Two Are 240Lb. Super Strong!! You Couldn’T Compress It By Your Hand! Suitable For Lids Or Doors Weighing Between 100B And 150Lb. Don't Buy For A Lightweight Project Less Than 80Lb. If You Think These 120Lb Gas Shocks Are Too Strong Or Too Heavy For Your Project, Please Contact Us For A More Suitable One..
[Parameter] Interchange Part Number C16-08055 C1608055. Extended Length:19.69", Compressed Length: 12.20"; End Fittings:10Mm Nylon Ball Sockets. Mounting Bracket Needed (Not Included ): 10Mm Ball Stud Mounting Bracket..
Features
- [APPLICATION] 20in 120lb per gas shock compatible with queen bed oversize mattress, ARE Leer truck pickup bed tonneau Cover, camper bed, travel trailer bed, murphy bed, shed window, and other heavy-duty DIY appliacation.
- [PARAMETER] Interchange Part Number C16-08055 C1608055. Extended Length:19.69, compressed Length: 12.20; End Fittings:10mm Nylon Ball Sockets. Mounting bracket needed (Not INCLUDED ): 10mm Ball Stud Mounting Bracket.
- [NEED KNOW] If you used these gas shocks as a replacement for the Truck Tonneau Cover or Trailer cover, you have to compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
- [TIPS] 120lb Per strut, two are 240lb. Super strong!! You couldn t compress it by your hand! Suitable for lids or doors weighing between 100b and 150lb. Don't buy for a lightweight project less than 80LB. If you think these 120lb gas shocks are too STRONG or too HEAVY for your PROJECT, please contact us for a more suitable one.
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #2
A-Premium Tailgate and Rear Window Lift Supports Shock Struts Gas Spring Compatible with Chevrolet and Gmc Models - Escalade/Tahoe/Yukon 2007-2014, Suburban 1500 2500 - Replace# 15827433 (4PC Set)
Asin: B07D7ZR3KY
[Reference Number]: The A-Premium Lift Support's Reference Number: 6156, 6157, Sg330076, Sg330077, 15827433, 15854712, 20952718, 15161943, 15161944---Please Enter Your Vehicle Information In The Top Left Corner Of The Listing And Check Our Special Notes Before Ordering..
[Buy With Confidence]: A-Premium Offers A One-Year Unlimited-Mileage Guarantee On Our Meticulously Crafted Lift Supports. We Offer A Wide Variety Of Automotive Accessory Categories, Ensuring That You Can Hit The Road With Peace Of Mind..
[Package Details]: Package Includes 4 Pieces Lift Supports. Strong Package With Thick Cardboard Which Provides Shock Absorption And Protection During Transportation..
[Perfect Fitment-2]: Compatible With Chevrolet Suburban 2014 Sport Utility, Suburban 1500/Tahoe 2007-2014 Sport Utility, Yukon Xl 2500 2007-2013 Sport Utility---Rear Tailgate And Window (Left And Right Side).
Features
- [Perfect Fitment-1]: Compatible with Cadillac Escalade/Escalade ESV 2007-2014 Sport Utility, Escalade EXT 2007-2013 Crew Cab Pickup; Compatible with GMC Yukon/Yukon XL 1500 2007-2014 Sport Utility, Yukon XL 2500 2007-2013 Sport Utility---Rear Tailgate and Window Glass (Left and Right Side)
- [Perfect Fitment-2]: Compatible with Chevrolet Suburban 2014 Sport Utility, Suburban 1500/Tahoe 2007-2014 Sport Utility, Yukon XL 2500 2007-2013 Sport Utility---Rear Tailgate and Window (Left and Right Side)
- [Reference Number]: The A-Premium Lift Support's reference number: 6156, 6157, SG330076, SG330077, 15827433, 15854712, 20952718, 15161943, 15161944---Please enter your vehicle information in the top left corner of the listing and check our Special Notes before ordering.
- [Package Details]: Package includes 4 pieces Lift Supports. Strong package with thick cardboard which provides shock absorption and protection during transportation.
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted lift supports. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
- See more on Amazon...
Brand: A-Premium | Manufacturer: PremiumpartsWhosale
Dimensions: 0.39 x 0.39 x 0.39 Inches
Warranty: One Year Unlimited Mileage Quality Guarantee. The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
See On Amazon #3
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches | Weight: 0.75 Pounds
See On Amazon #4
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07F946Z1V | Model: 157094-45-10 | PartNumber: 157094-45-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-23993 Or Stabilus #14269. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Medium Height And Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 60-80 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon #5
BOXI 2pcs Tailgate Lift Supports Struts Shocks Gas Struts Springs Fit for Volvo XC90 Hatchback 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 / Replaces SG315018 30634580 6133
Asin: B014P6OXRK | Ean: 0707837774530 | UPC: 707837774530
Replaces Part Numbers: 30 634 580,30 634 5802,31 218 511,612903, Sg315018,95666, 30634580, 306345800, 30634580-0, 31218511, 312185110, 31218511-0, 4981Qe, 6133, 9247Zz, C95666, Mr991807..
Important Note - Please Check The Description Or Use The Year/Make/Model Drop Down Bar And Interchangeable Part Numbers To Confirm The Compatibility Before Purchasing. If You Don't Make Sure Whether This Item Fit Your Vehicles, Please Message Us..
5-Year Limited Warranty.
Extended Length [In] 18.43 Compressed Length [In] 11.43.
Features
- Fit for Volvo XC90 2003 - 2014 Liftgate
- Extended Length [in] 18.43 Compressed Length [in] 11.43
- Replaces Part Numbers: 30 634 580,30 634 5802,31 218 511,612903, SG315018,95666, 30634580, 306345800, 30634580-0, 31218511, 312185110, 31218511-0, 4981QE, 6133, 9247ZZ, C95666, MR991807.
- 5-Year Limited Warranty
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing. If you don't make sure whether this item fit your vehicles, please message us.
- See more on Amazon...
Brand: BOXI | Manufacturer: ShangHai BOXI Auto Parts Co., Ltd.
See On Amazon #6
2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B074PYKFCY | Model: 12”, 40 lbs | PartNumber: 12”, 40 lbs | Ean: 0709832096709 | UPC: 709832096709
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Not For Steel Toolboxes- Will Not Hold Up Lid. Fit Most Weatherguard Aluminum Truck Bed Toolboxes Only, Models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible With Many Truck Canopy Types, Including Leer, Are, Century, Snugtop, And Atc Tops, & Many Other Brands That Utilize Gas Shocks / Gas Springs / Gas Lifts. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, & Suspa..
Equivalent To Suspa #C16-11028, Stabilus #19068, Or Weatherguard 7009-2Pk . Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors & Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Other Toolbox Struts, Etc. These Gas Shock Lift Supports Can't Be Compressed By Hand. They Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position..
Truck Upfitters Pair (2 Total) Of 40 Pound (Each) Gas Struts. 12.2" Extended Length And 7.5" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 40 Lbs Of Pressure, For A Total Of 80 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 80 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2 extended length and 7.5 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
- NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 Inches | Weight: 0.69 Pounds
See On Amazon #7
2 Truck Upfitters Gas Props for Undercover Tonneau Covers ONLY. 27.5" Extended and 15.6" Compressed Length (Measured from Center of Ball mounts), 38 pounds of Pressure ea. Incl 4 Ball mounts!
Asin: B01K9BQ3TG | Model: Truck Upfitters | PartNumber: Truck Upfitters | Ean: 0709832096433 | UPC: 709832096433
These Undercover Bed Cover Shocks Do Not Match All Tonneau Cover Struts And Are Only Compatible With Undercover Pickup Bed Cover. If You Are Not Sure Of The Fit, Measure Your Gas Strut Lift Support From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure Gas Springs. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift..
These Undercover Replacement Parts Are Compatible With Undercover Tonneau Cover Parts Only! Although They May Fit Other Brands, We Have Only Tested These Undercover Bed Cover Parts To Be Compatible With Undercover Parts Only. When You Are Performing An Undercover Lock Replacement Or Swapping Out Other Undercover Truck Bed Cover Parts, It's A Good Idea To Also Replace The Gas Support Strut / Tonneau Cover Shocks As Well! These Gas Lift Support Are Strong An Durable, And Last Up To 5 Years..
Equivalent To # Gpst270p Or Stabilus # 0518. Fits All Se/Classic/Elite Undercover Truck Bed Covers Except For Ford Sporttrac Undercover. Will Not Fit Any Fiberglass Tonneau Covers. Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications. These Gas Shock Lift Supports Cannot Be Compressed By Hand. They Must Be Installed In The Extended / Open Position. Do Not Try To Install Them In The Closed Position. Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound Gas Struts. 27.5" Extended Length And 15.6" Compressed Length (Measured From Center Of Each Ball Mount). 29" Overall Extended Length (Measured From Tip To Tip). Use A Measuring Tape To Measure The Door Gas Strut That You Are Replacing. Measure From The Center Of The Gas Prop Head (Little Plastic End), To The Other Side. Do Not Measure From The End Of The Gas Prop, Your Measurement Will Be Too Long. Note That Most Applications Allow For 1-5% Size Variation..
Features
- CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL PLASTIC TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
- Truck Upfitters Pair of 38 pound gas struts. 27.5 extended length and 15.6 compressed length (measured from center of each ball mount). 29 overall extended length (measured from tip to tip). Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- These undercover bed cover shocks do not match all tonneau cover struts and are only compatible with undercover pickup bed cover. If you are not sure of the fit, measure your gas strut lift support from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure gas springs. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift.
- Equivalent to # GPSt270P or Stabilus # 0518. Fits all SE/Classic/Elite Undercover truck bed covers except for Ford Sporttrac Undercover. Will NOT FIT ANY FIBERGLASS tonneau covers. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications. These gas shock lift supports CANNOT be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. Do NOT try to install them in the CLOSED position. Refer to the install video for guidance on how to install.
- These undercover replacement parts are compatible with undercover tonneau cover parts only! Although they may fit other brands, we have ONLY tested these undercover bed cover parts to be compatible with Undercover parts only. When you are performing an undercover lock replacement or swapping out other undercover truck bed cover parts, it's a good idea to also replace the gas support strut / tonneau cover shocks as well! These gas lift support are strong an durable, and last up to 5 years.
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 28.00 x 0.50 Inches | Weight: 0.88 pounds
See On Amazon #8
16" 55Lbs/249N Gas Shock Strut for Leer are Camper Shell Topper Rear Window, Truck Cab Canopy Door, Set of 2 Vepagoo.
Asin: B08FJ1F2RY | Ean: 0724500131643 | UPC: 724500131643
🧡[Note] Please Confirm The Length Before Ordering. Measure The Distance From The Center Of The Socket To The Center Of The Socket..
🧡[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs!.
🧡[Interchange Part Number] C16-23994. Stabilus # 025657. Easy To Install, No Special Tools Required. End Fiting: 10Mm Ball Stud Sockets..
🧡[Parameter] Compressed Length (Center-To-Center): 9.4In (239Mm). Extended Length (Center-To-Center): 15.7In (399Mm). Force: 55 Lbs/249N Per Strut..
Features
- [Most used for] 16inch 55Lb/249N gas shock struts compatible with Leer ARE SnugTop camper shell truck topper rear window, Truck Pickup Cab Canopy Door and other custom Applications.
- [Parameter] Compressed Length (Center-to-Center): 9.4in (239mm). Extended Length (Center-to-Center): 15.7in (399mm). Force: 55 Lbs/249N per Strut.
- [Note] Please confirm the length before ordering. Measure the distance from the center of the socket to the center of the socket.
- [Interchange Part Number] c16-23994. Stabilus # 025657. Easy to install, no special tools required. End Fiting: 10mm Ball Stud Sockets.
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs!
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #9
Premium Quality Brand Stabilus Tailgate Lift Support Compatible with 2019-2007, Toyota Tundra, Black (4B-256726)
Asin: B09MDH8SWL | Model: 4B-256726 | PartNumber: 4B-256726 | Ean: 0194879008271, 0194879032597 | UPC: 194879032597, 194879008271
Extended Length [In] 16,85, Force [N] 275.
Interchange Part Number: 7066.
Fit For 2019 - 2007, Toyota Tundra.
Features
- Made in Mexico - Produced and Supplied to Automotive Manufacturer. Same performance and quality specifications. Exact replacement engineered for this application. Original opening and closing control of your hood, hatch or trunk.
- Fit for 2019 - 2007, Toyota Tundra
- Extended Length [in] 16,85, Force [N] 275
- Interchange Part Number: 7066
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 1.00 x 16.85 x 1.50 Inches | Weight: 0.70 pounds
Warranty: 2 year manufacturer
See On Amazon #10
Premium Quality Brand Stabilus Hood Lift Supports Compatible With 2011-2019, DODGE DURANGO + more,Black
Asin: B09L5J2FNX | Model: 4B-877865 | PartNumber: 4B-877865 | Ean: 0194879017297 | UPC: 194879017297
Extended Length [In] 22,33, Force [N] 245.
Easy To Install In Just Minutes And No Special Tools Required For Installation.
Interchange Part Numbers: 55113748Aa, Sg214069, 6468.
Fit For 2011 - 2019, Dodge Durango / 2011 - 2019, Jeep Grand Cherokee.
Features
- Made in USA - Produced and Supplied to Automotive Manufacturer. Same performance and quality specifications. Exact replacement engineered for this application. Original opening and closing control of your hood, hatch or trunk.
- Fit for 2011 - 2019, DODGE DURANGO / 2011 - 2019, JEEP GRAND CHEROKEE
- Extended Length [in] 22,33, Force [N] 245
- Interchange Part Numbers: 55113748AA, SG214069, 6468
- Easy to install in just minutes and no special tools required for installation
- See more on Amazon...
Brand: Stabilus | Manufacturer: Stabilus
Dimensions: 1.00 x 223.03 x 1.50 inches
Warranty: 2 year manufacturer
See On Amazon #11
Vepagoo C16-21220 18.7 inch 28Lb/125N Gas Shocks Struts Sping for are Leer Snugtop Camper Topper Shell Rear Window, Truck Canopy Cap Cover, Cabinets Door Toolbox Lid, Set of 2
Asin: B093GYMV7X | Ean: 0746827170877 | UPC: 746827170877
🌳18.5 Inch 28Lbs/125N Window Struts🌳Vepagoo Gas Shock Struts Fit For Leer/Are/Tonneau Camper Shell Rear Window Topper Door Tonneau Cover Lift Supports Rv Truck Car's Window And So On..
🌳18.5 Inch 28Lbs/125N Window Struts🌳End Fiting: 10Mm Ball Stud Sockets..
🌳18.5 Inch 28Lbs/125N Window Struts🌳Interchange Part Number C16-21220. Easy To Install, No Special Tools Required..
🌳18.5 Inch 28Lbs/125N Window Struts🌳--Compressed Length (Center-To-Center): 10.7In (275Mm), Extended Length (Center-To-Center): 18.5In (475Mm), Force: 28 Lbs (125 N) (Per Strut).
Features
- 18.5 inch 28Lbs/125N Shocks Struts --A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance!
- 18.5 inch 28Lbs/125N Window Struts --Compressed Length (Center-to-Center): 10.7in (275mm), Extended Length (Center-to-Center): 18.5in (475mm), Force: 28 Lbs (125 N) (Per Strut)
- 18.5 inch 28Lbs/125N Window Struts Vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on.
- 18.5 inch 28Lbs/125N Window Struts Interchange Part Number C16-21220. Easy to install, no special tools required.
- 18.5 inch 28Lbs/125N Window Struts End Fiting: 10mm Ball Stud Sockets.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #12
HelloAuto C1616411 C16-02648 17 inch 35lb/156N Per Prop, Gas Struts Shock Spring Lift Support for Leer A.R.E Camper Shell Truck Cap Topper Rear Windows Replacement Pickup Cab Canopy Door, Pack of 2
Asin: B0CGH9QG92
✅Easy To Replace: Every Part Of Helloauto Gas Strut Is Constructed As Per Oem Specification, Only 3 Steps With A Flat Screwdriver Is Able To Finish The Installation, No Drilling Needed, And No Other Tools Required!.
✅Helloauto Care: 18 Months Product Support - If You Encounter Any Questions Before Or After Purchasing, Just Click "Ask Seller" Beside Your Order From Us, We Will Solve The Problem For You Within 12 Hours!.
✅C1616411 17 Inch Gas Prop Struts: C16-14732 Struts Could Be Used As The Replacement Parts For Truck Topper, Motorcycle Trailer Door, Truck Cap Shell, Camper Shell Window Glass, Leer Window, Etc..
✅17 Inch Gas Spring: Interchange Part Number: 1592Em, C1616411, C16-16411, C16-14732, C1602648,Ml1635, Ml16-35, Ml-16-35, Ml3635, Ml36-35, Ml-36-35, Se172p35, Sl1635, Sl16-35, Sl-1635, Sl-16-35, Sl16351, Sl16-35-1, Sl-16351, Sl-16-35-1, Sl16355, Sl16-35-5, Sl-16355, Sl-16-35-5, Sl3635, Sl36-35, Sl-3635, Sl-36-35, Please Check The Interchange Number On Your Old Struts (If Has) Before Purchasing!.
Features
- 17 inch Gas Strut: Extended length: 17 Inch(center to center), Compressed length: 10Inch(center to center). 35 Lb / 156 N per strut, 2 PACK. Package contains 17in camper shell struts*2.
- 17 inch Gas Spring: Interchange Part number: 1592EM, C1616411, C16-16411, C16-14732, c1602648,ML1635, ML16-35, ML-16-35, ML3635, ML36-35, ML-36-35, SE172P35, SL1635, SL16-35, SL-1635, SL-16-35, SL16351, SL16-35-1, SL-16351, SL-16-35-1, SL16355, SL16-35-5, SL-16355, SL-16-35-5, SL3635, SL36-35, SL-3635, SL-36-35, please check the interchange number on your old struts (if has) before purchasing!
- Easy To Replace: Every part of Helloauto Gas Strut is constructed as per OEM specification, only 3 steps with a flat screwdriver is able to finish the installation, no drilling needed, and no other tools required!
- C1616411 17 inch Gas Prop Struts: C16-14732 struts could be used as the replacement parts for truck topper, motorcycle trailer door, truck cap shell, camper shell window glass, leer window, etc.
- HelloAuto Care: 18 months product support - if you encounter any questions before or after purchasing, just click ask Seller beside your order from us, we will solve the problem for you within 12 hours!
- See more on Amazon...
Brand: HelloAuto | Manufacturer: HelloAuto
See On Amazon #13
C16-04145 15 inch 24Lbs/107N Gas Shocks Struts for are Leer Snugtop Camper Topper Shell Rear Window, Truck Canopy Cap Cover, Cabinets Door, Set of 2 Vepagoo.
Asin: B08JYXBL8B | Model: SH240A | PartNumber: SH240A | Ean: 0746827165163, 0746827173083 | UPC: 746827173083, 746827165163
🍎【Note】Please Compare The Length Of Your Original Gas Spring' Compression And Extension, Type Of Connector, And Lift Capability Before Purchasing..
🍎【12+1 Month Replacement Service】Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
🍎【Interchange Number】C16-04145 C16-04145. Easy To Install, No Special Tools Required. End Fitting: 10Mm Sockets..
🍎【Parameter】Compressed Length (Center-To-Center):14.45"(367Mm), Extended Length (Center-To-Center): 8.98" (228Mm), Force: 24 Lbs Per Strut, Two Are 48Lb..
Features
- Most used for C16-04154 14.45 inch 24Lbs/107N gas shock strut compatible with 14''-15''/19lb-26.5lbLeer ARE SnugTop camper shell truck topper rear window, Truck Pickup Cab Canopy Door, Cabinets Door and other custom Applications.
- Parameter Compressed Length (Center-to-Center):14.45(367mm), Extended Length (Center-to-Center): 8.98 (228mm), Force: 24 Lbs Per Strut, two are 48LB.
- Note Please compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
- INTERCHANGE NUMBER C16-04145 C16-04145. Easy to install, no special tools required. End Fitting: 10mm Sockets.
- 12+1 MONTH REPLACEMENT SERVICE Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #14
2 Truck Upfitters 12" Gas Props (12.2" Extended, 8.6" Compressed, 24 lbs of Press ea) for are ATC Snugtop Leer Camper Top Side/Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B01MQRPK6P | Model: 122086-24-10 | PartNumber: 122086-24-10 | Ean: 0709832096631 | UPC: 709832096631
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa #C16-03795 Or Stabilus #1906. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair (2 Total) Of 24 Pound (Each) Gas Struts. 12.2" Extended Length And 8.6" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 24 Lbs Of Pressure, For A Total Of 48 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 48 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 20-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 24 pound (each) gas struts. 12.2 extended length and 8.6 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 24 lbs of pressure, for a total of 48 lbs of pressure. Please note that this does not mean that it can lift something that is 48 lbs. the typical hinged-style door weight for this prop is approximately 20-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa #C16-03795 or Stabilus #1906. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 inches | Weight: 0.69 Pounds
See On Amazon #15
A-Premium Tailgate Lift Supports Shock Struts Spring Prop Compatible with Honda Pilot 2009-2015 2-PC Fit with Power Liftgate
Asin: B08BCR3H4T
[Package Details]: Package Includes 2 Pieces Lift Supports. Strong Package With Thick Cardboard, Which Provides Shock Absorption And Protection During Transportation.
[Buy With Confidence]: A-Premium Offers A One-Year Unlimited-Mileage Guarantee On Our Meticulously Crafted Lift Supports. We Offer A Wide Variety Of Automotive Accessory Categories, Ensuring That You Can Hit The Road With Peace Of Mind..
[Directly Fit]: Oe Replacement Lift Supports Shock Struts, Directly Fit. Easy Installation, No Special Tools Required. High Strength Leak-Proof Piston Seal; Superior Rod Finish Resists Corrosion; Easy Lifting And Reduce Closing Effort.
[Reference Number]: The A-Premium Lift Support's Reference Number: 74820-Sza-A21, 74820-Sza-Aca21, 6648, 74820Szaa21, 74820Szaaca21---Please Enter Your Vehicle Information In The Top Left Corner Of The Listing And Check Our Special Notes Before Ordering.
Features
- [Perfect Fitment]: Compatible with Honda Pilot 2009-2015 Sport Utility---Rear Tailgate (Left and Right Side); It fits the model with Power Liftgate
- [Reference Number]: The A-Premium Lift Support's reference number: 74820-SZA-A21, 74820-SZA-ACA21, 6648, 74820SZAA21, 74820SZAACA21---Please enter your vehicle information in the top left corner of the listing and check our Special Notes before ordering
- [Package Details]: Package includes 2 pieces Lift Supports. Strong package with thick cardboard, which provides shock absorption and protection during transportation
- [Directly Fit]: OE replacement Lift Supports Shock Struts, directly fit. Easy installation, no special tools required. High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort
- [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted lift supports. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
- See more on Amazon...
Brand: A-Premium | Manufacturer: PremiumpartsWhosale
Warranty: One Year Unlimited Mileage Quality Guarantee. The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
See On Amazon #16
C1608584 14" 60Lbs/267N Gas Struts Spring Lift Support Shock for are Snugtop Leer Camper Shell Truck Topper Rear Window Truck Hood Bed Cap Canopy Door Boat Hatch Toolbox Lid 2pcs by IAQWE
Asin: B0BNBQSJ7K | Model: C1608584 | PartNumber: C1608584 | Ean: 0746827178439 | UPC: 746827178439
♦️60Lbs Gas Struts♦️ Suitable For Camper Shell, Truck Topper Window, Leer Are Atc Camper Topper, Rear Window, Truck Topper Bed And So On. Scope Of Application: 45-66Lbs. Your Diy Can Create More Possibilities For Gas Shocks, Looking Forward To Your Diy Creations!.
♦️Package Contents.♦️ 2Pcs* 14Inch Gas Struts, 1Pc*Installation Manual. Welcome Guide And Friendly Customer Service..
♦️Premium 14 Inch Gas Struts♦️ Iaqwe Gas Spring Can Work Normally In Patio, Topper Window, Underground Hatch, Boat, Garbage Bin Cover, Tool Box Lid, Tent And Other Outdoor Areas. As The Best And Reliable Gas Spring Manufacturer, Iaqwe Will Always Stand Behind You To Provide You With The Strongest Support..
♦️14 Inch Gas Shocks♦️ Interchange Number: 6921,C1608584..
Features
- GAS SPRING PARAMETER Force: 60 Pound 14 inch per Strut, a pair of 2 shocks. Extended Length( hole to hole): 13.98 , Compressed Length( hole to hole): 8.50 . Very Strong! Can not compress directly by your hands.
- 14 INCH GAS SHOCKS Interchange number: 6921,C1608584.
- 60Lbs GAS STRUTS Suitable for Camper Shell, Truck Topper Window, Leer ARE ATC Camper Topper, Rear Window, Truck Topper Bed and so on. Scope of application: 45-66lbs. Your DIY can create more possibilities for Gas Shocks, looking forward to your DIY creations!
- PREMIUM 14 INCH GAS STRUTS IAQWE gas spring can work normally in patio, topper window, Underground hatch, boat, garbage bin cover, tool box lid, tent and other outdoor areas. As the best and reliable gas spring manufacturer, IAQWE will always stand behind you to provide you with the strongest support.
- Package contents. 2Pcs* 14inch Gas Struts, 1Pc*Installation Manual. Welcome guide and friendly customer service.
- See more on Amazon...
Brand: IAQWE | Manufacturer: IAQWE
See On Amazon #17
2 Truck Upfitters 13" Gas Props (13" Extended, 8.1" Compressed, 30 pounds of Pressure ea) for A.R.E, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K9DF5RA | Model: 13”, 30 lbs | PartNumber: 13”, 30 lbs | Ean: 0709832096426 | UPC: 709832096426
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04464 Or C16-04464A Or Stabilus # 0516. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 30 Pound (Each) Gas Struts. 13.0" Extended Length & 8.1" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Windows / Camper Shell Doors. Each Canopy Shock Has 30 Lbs Of Pressure, For A Total Of 60 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 60 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-50 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure camper struts from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 30 pound (each) gas struts. 13.0 extended length & 8.1 compressed length. This size of door shock absorber is for tall medium weight rear or side camper windows / camper shell doors. Each canopy shock has 30 lbs of pressure, for a total of 60 lbs of pressure. Please note that this does not mean that it can lift something that is 60 lbs. the typical hinged-style door weight for this prop is approximately 30-50 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-04464 or c16-04464A or Stabilus # 0516. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 13.50 x 0.50 Inches | Weight: 0.75 pounds
See On Amazon #18
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B074MF3HMP | Model: 17”, 45 lbs | PartNumber: 17”, 45 lbs | Ean: 0709832096785 | UPC: 709832096785
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 60-80 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 1.00 x 18.00 x 2.00 inches | Weight: 0.81 Pounds
See On Amazon #19
2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
Asin: B07PRZKWY8 | Model: 16”, 55 lbs | PartNumber: 16”, 55 lbs
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible With Suspa # C16-23994 & Compatible With Stabilus # 025657 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 55 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium/Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 55 Lbs Of Pressure, For A Total Of 110 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 110 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 70-90 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.70 x 15.70 x 0.70 inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search