3PCS BTS7960 DC Stepper Motor Driver Module 43A Current Limit Control Module H-Bridge PWM Smart Car Board Compatible with Raspberry Pi Smart Car
Asin: B09P17BGTK | Ean: 0701715505926 | UPC: 701715505926
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink..
High Power Motor Driver Module Just Need Four Lines From Mcu To Driver Module (Gn/ 5V/ Pwm1/Pwm2), Two Heat Flow Passing Through An Error Signal Output..
Bts7960 Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz..
Motor Driver Module Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V..
Features
- BTS7960 large current (43 A) H bridge driver, 5V power indicator on board; 5V isolate with MCU, and effectively protect MCU.
- Motor driver module isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- Voltage indication of motor driver output end; can solder heat sink.
- BTS7960 able to reverse the motor forward, two PWM input frequency up to 25kHZ.
- High power motor driver module just need four lines from MCU to driver module (GN/ 5V/ PWM1/PWM2), two heat flow passing through an error signal output.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon Similar To 3PCS BTS7960 DC Stepper Motor
#1
STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-Lead W/ 1m Cable and Connector Compatible with 3D Printer/CNC
Asin: B00PNEQKC0 | Model: 17HS19-2004S | PartNumber: 17HS19-2004S
Ean: 0701056358779, 0798167993654, 5915903798815, 0789164236554, 0715624560631, 0191579035491, 0191388825313, 0712322835252, 0190657686020
UPC: 191388825313, 798167993654, 191579035491, 701056358779, 190657686020, 712322835252, 789164236554, 715624560631
Nema 17 Bipolar 1.65"X1.65"X1.89" 4-Wire.
Rated Current 2.0A & Resistance 1.4Ohms.
Build With 39.37"( 1M) Cable And 0.1" Pitch Connector.
59Ncm(83.6Oz.In) Holding Torque.
Features
- 3D printer motor with high torque
- 59Ncm(83.6oz.in) holding torque
- NEMA 17 bipolar 1.65x1.65x1.89 4-wire
- Build with 39.37( 1m) Cable and 0.1 pitch Connector
- Rated current 2.0A & resistance 1.4ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: OSM Technology Co.,Ltd.
Dimensions: 1.89 x 1.65 x 1.65 Inches | Weight: 0.88 Pounds
See On Amazon #2
HiLetgo BTS7960 43A Dual H-Bridge Stepper Motor Drive Current Limit Control Semiconductor Refrigeration PWM for Smart Car Motor Drive Arduino
Asin: B00WSN98DC | Model: 3-01-0833 | PartNumber: 3-01-0833 | Ean: 0702949574993, 0696761773989 | UPC: 702949574993, 696761773989
Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2); Isolation Chip 5 V Power Supply (Can Share With Mcu 5 V)..
Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V..
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output..
Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink..
Features
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 5.00 x 5.00 x 5.00 inches | Weight: 0.11 Pounds
Warranty: Permanent warranty
See On Amazon #3
FYSETC 42-34 Stepper Motor, Ender 3 V2 CR6 SE CR10 Nema17 Motor for Ender 3 X/Y/Z Axis, for CR-10 10S Ender 3/ Pro/Max Ender 5 3D Printer, 2 Phase 1A 1.8 Degree 0.35N.M with 39.3inch Cable
Asin: B07GDBMT1D
Size: 42Mm X 42Mm X 34Mm. 2 Phase 4 Wires, With 39.3 In/ 1 Meter Cable..
Package Includes: 1 X 42-34 Nema 17 Stepper Motor; 1 X 39.3Inch Connecting Cable..
100% Brand New, Rohs And Ce Certified..
High Torque -Holding Torque Up To 0.35Nm. Low Loss Stators Have Better High Speed Performance..
Features
- Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.
- High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.
- Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.
- 100% brand new, ROHS and CE certified.
- Package Includes: 1 x 42-34 Nema 17 Stepper Motor; 1 x 39.3inch connecting cable.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 2.11 x 1.65 x 1.65 inches | Weight: 0.49 Pounds
See On Amazon #4
D-FLIFE 4pcs BTS7960 43A Dual H-Bridge Stepper Motor Drive Current Limit Control Semiconductor Refrigeration PWM for Smart Car Motor Drive Arduino
Asin: B0CTXY5P7J | Ean: 0687117732835 | UPC: 687117732835
Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2); Isolation Chip 5 V Power Supply (Can Share With Mcu 5 V)..
Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V..
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output..
Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink..
Features
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #5
Teyleten Robot BTS7960 43A High Power H-Bridge DC Motor Driver Module DC Motor Controller Module for Arduino Smart Car 2pcs
Asin: B099N8XS5P | Model: C9- | PartNumber: C9- | Ean: 9339272399118
Double Bts7960 H-Bridge Driver Circuit, With A Strong Drive And Braking, Effectively Isolating The Microcontroller And Motor Driver.
5V Power Indicator On Board; Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink; Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2).
High-Current 43A Features: Double Bts7960 Large Current (43 A) H Bridge Driver; 5V Isolate With Mcu, And Effectively Protect Mcu.
This Driver Uses Infineon Chips Bts7960 Composed Of High-Power Drive Full H-Bridge Driver Module With Thermal Over-Current Protection.
Features
- Since the pin header is easily broken, we have added foam to the pin header
- This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection
- Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver
- High-current 43A Features: Double BTS7960 large current (43 A) H bridge driver; 5V isolate with MCU, and effectively protect MCU
- 5V power indicator on board; voltage indication of motor driver output end; can solder heat sink; Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2)
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
See On Amazon #6
Geeetech Nema 17 Stepper Motor, 42-40 Stepper Motor, Ender 3 Extruder Motor with 27.5 inch Cable, 2 Phase 1.68A 1.8 Degree 0.4N.M, Compatible with Ender-3 Pro, X/Y/E-axis, CR-10 Series, CN D-Shape
Asin: B0BMZTQG4C | Model: D42HS3418-24B22 | PartNumber: D42HS3418-24B22
Runs Stably & Stays Cool: Keep Your Machine Running Smoothly And Quietly With Geeetech 1.8 Degree Stepper Motor. Epoxylite-Coated Rotor, Strengthened Pcb, And High-Accuracy Processing Work Together To Reduce Heat Generation..
After-Sales Service: Package Includes: 1 X 42-40 Stepper Motor; 1 X 27.5-Inch Cable. Every Motor Is Rigorously Tested Before Leaving The Factory, And It Is Provided With A One-Year Warranty And Lifetime Technical Support..
Low Noise & D-Shape: Using A Combination Of Pure Copper And Advanced Winding Techniques To Dissipate Heat, Reduce Noise, And Extend The Ender 3 V2 Motor's Lifespan. 5Mm(D-Shape) Perfectly Fits With The High-Strength Synchronous Wheel And Synchronous Gear, Ensuring It’S High Precision..
High Torque Stepper Motor: 1.8-Degree Step Angle, 0.4N.M Holding Torque, With 1.68 A Rated Current Per Phase. Cr10 Stepper Motor Produces Enough Torque For A Well-Designed Geared Extruder To Overcome Almost Any Jam..
Features
- DIY Dual Gear Extruded Upgrade: Ender 3 stepper motor is an ideal replacement for the extruder motor for a 3d printer. Ender 3 pro stepper motor is compatible with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3.
- High Torque Stepper Motor: 1.8-degree step angle, 0.4N.M holding torque, with 1.68 A rated current per phase. Cr10 stepper motor produces enough torque for a well-designed geared extruder to overcome almost any jam.
- Runs Stably & Stays Cool: Keep your machine running smoothly and quietly with Geeetech 1.8 degree stepper motor. Epoxylite-coated rotor, strengthened PCB, and high-accuracy processing work together to reduce heat generation.
- Low Noise & D-Shape: Using a combination of pure copper and advanced winding techniques to dissipate heat, reduce noise, and extend the Ender 3 v2 motor's lifespan. 5mm(D-shape) perfectly fits with the high-strength synchronous wheel and synchronous gear, ensuring it s high precision.
- After-sales Service: Package includes: 1 x 42-40 stepper motor; 1 x 27.5-inch cable. Every motor is rigorously tested before leaving the factory, and it is provided with a one-year warranty and lifetime technical support.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
Dimensions: 2.56 x 1.57 x 1.65 inches
See On Amazon #7
SOULUCK Nema 23 Stepper Motor 57x57x82mm Body 1.8 Stepper Angle 3.0A,Torque 2.2N,2 Phase 4-Lead with 80cm Cable for 3D Printer, CNC Machine and Robotics
Asin: B0CNZ73TVL | Model: D- 57x57x82mm(2.2N) | PartNumber: D- 57x57x82mm(2.2N) | Ean: 0764725236808 | UPC: 764725236808
【Precise Control】: The Stepper Motor Has A Step Angle Of 1.8 Degrees, Allowing For Accurate And Precise Motion Control. This Makes It Ideal For Applications That Require Precise Positioning And Movement, Ensuring High-Quality Results In Cnc Engraving, Milling, And Lathe Operations..
【Easy Installation And Compatibility】: The Stepper Motor Comes With A 2-Phase 4-Lead Design, Along With An 80Cm Cable, Making It Convenient To Connect With Controllers And Drivers. It Follows The Standard Nema 23 Mounting Configuration, Ensuring Compatibility With A Wide Range Of Cnc Routers, Engraving Machines, Milling Machines, And Lathes..
【Efficient Power Output:】: Rated At 3.0A, This Stepper Motor Provides A Reliable Power Output For Driving Various Loads. It Delivers A Torque Of 2.2N, Enabling It To Handle Tasks That Require Moderate Torque, Such As Cutting, Drilling, And Engraving With Ease..
【Step Angle】: 1.8° /Step 【Working Voltage】: 24 V 【Current】: 3.0 A/Phase 【Resistance】: 1.2 Ω/Phase 【Inductance】: 】: 5.1 Mh/Phase 【Holding Torque】:2.2N. M 【Insulation Class】: :B.
Features
- Nema 23 Stepper Motor Body :57x57x82mm = 2.24x2.24x3.23 inches with 80cm Cable
- STEP ANGLE : 1.8 /STEP WORKING VOLTAGE : 24 v CURRENT : 3.0 A/PHASE RESISTANCE : 1.2 /PHASE INDUCTANCE : : 5.1 mH/PHASE HOLDING TORQUE :2.2N. m INSULATION CLASS : :B
- Precise control : The stepper motor has a step angle of 1.8 degrees, allowing for accurate and precise motion control. This makes it ideal for applications that require precise positioning and movement, ensuring high-quality results in CNC engraving, milling, and lathe operations.
- Efficient power output: : Rated at 3.0A, this stepper motor provides a reliable power output for driving various loads. It delivers a torque of 2.2N, enabling it to handle tasks that require moderate torque, such as cutting, drilling, and engraving with ease.
- Easy installation and compatibility : The stepper motor comes with a 2-phase 4-lead design, along with an 80cm cable, making it convenient to connect with controllers and drivers. It follows the standard NEMA 23 mounting configuration, ensuring compatibility with a wide range of CNC routers, engraving machines, milling machines, and lathes.
- See more on Amazon...
Brand: SOULUCK | Manufacturer: SOULUCK
See On Amazon #8
2pcs BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit
Asin: B09HXXG3DM | Ean: 0768470321550 | UPC: 768470321550
Just Need Four Lines From Mcu To Driver Module (Gnd. 5V. Pwm1. Pwm2); Isolation Chip 5 V Power Supply (Can Share With Mcu 5 V)..
Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V..
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output..
Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink..
Features
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- See more on Amazon...
Brand: Azuocn | Manufacturer: Azuocn
See On Amazon #9
JESSINIE 3PCS BTN7960 43A High Power Motor Driver Module BTN7960 Smart Car Driver Module for Arduino Current Limit
Asin: B0C1C3LKKM
Able To Reverse The Motor Forward, Two Pwm Input Frequency Up To 25Khz; Two Heat Flow Passing Through An Error Signal Output..
Protection: Over Temperature, Over Voltage, Under Voltage, Over Current, Short Circuit Protection; Function: With Current Diagnosis Function And Slope Adjustment Function.
Input Voltage: 6V-27V; Maximum Current: 43A; Input Level: 3.3-5V; Control Mode: Pwm Or Level; Duty Ratio: 0-100 Hundred.
This Drive Adopts An H-Bridge Drive Module Composed Of A High-Power Drive Chip Btn7960, Which Has The Function Of Overheating And Overcurrent Protection..
Features
- Double BTN7960 large current H bridge driver with a strong drive and brake effects; uses 74HC244 chip to effectively isolate the microcontroller and motor drive.
- This drive adopts an H-bridge drive module composed of a high-power drive chip BTN7960, which has the function of overheating and overcurrent protection.
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Input voltage: 6V-27V; Maximum current: 43A; Input level: 3.3-5V; Control mode: PWM or level; Duty ratio: 0-100 hundred
- Protection: over temperature, over voltage, under voltage, over current, short circuit protection; Function: With current diagnosis function and slope adjustment function
- See more on Amazon...
Brand: JESSINIE | Manufacturer: JESSINIE
See On Amazon #10
RATTMMOTOR 4 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft with Brackets, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
Asin: B09VKV26CW | Model: 4 Axis | PartNumber: 4 Axis
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430b 2-Phase Stepper Motor With Dual Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch And Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Upgraded 4.5A Stepper Motor Driver】Using The Latest Tb6600 New Installation Chip, There Are Low-Voltage Shutdown, Thermal Over-Stop And Over-Current Circuit Protection, And Compared With The Tb6560 Increased Short-Circuit Protection. Tb6600 Driver Operating Voltage Of Dc 10-45Vdc, Support For Sub-Division Of The Whole Step, Half-Step, 1/4, 1/8, 1/16 Step, Up To 42/57/86 Two-Phase / Four-Phase / Four-Wire / Six-Wire Stepper Motors Within 4.2A. / Six-Wire Stepper Motor..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Clk-" Connects To Control Card's Xp Pin , Driver's "Cw-" Connects To Control Card's Xd Pin , Driver's "5V" Connects To Control Card's 5V Pin.(The Usb Mach3 Control Card Can't Support Connection En- And En+)..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's CLK- connects to control card's XP pin , Driver's CW- connects to control card's XD pin , Driver's 5V connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Upgraded 4.5A Stepper Motor Driver Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #11
(Pack of 4pcs) NEMA17 Stepper Motor High Torque Bipolar DC Step Motor Kit by MOTOU
Asin: B07RZHWYQ9 | Model: 17HS3401 | PartNumber: 17HS3401 | Ean: 0791300576776 | UPC: 791300576776
『 Low Resistance 』- Compared With The Same Thickness And Torque Motor, Stepper Motor A Lower Resistance Value Can Be Obtained. This Greatly Increases The Thermal Conductivity Of The Motor, And Effectively Reduces The Rise In Temperature..
『 Refund Satisfaction Guarantee 』- We Are Committed To All The Precious Customers With Quality Products. If The Product Let You Down, Just Contact Us And We Will Refund Your Purchase Price As Soon As Possible. 100% Satisfaction..
『 Smooth Movement 』- High Motor Stability, Uniform Speed, Low Noise, Long Life, Feel Good..
『 High Torque 』- The Stepper Motor Uses High-Quality Motor Steel Material, Providing High Torque, Low Inductance Reactance, Responsive, Thereby Avoiding System Errors..
Features
- WIDELY USED - This small stepper motor may be used in various fields such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; mounter; non-standard equipment; automation equipment, etc.
- HIGH TORQUE - The stepper motor uses high-quality motor steel material, providing high torque, low inductance reactance, responsive, thereby avoiding system errors.
- LOW RESISTANCE - Compared with the same thickness and torque motor, stepper motor a lower resistance value can be obtained. This greatly increases the thermal conductivity of the motor, and effectively reduces the rise in temperature.
- SMOOTH MOVEMENT - High motor stability, uniform speed, low noise, long life, feel good.
- REFUND SATISFACTION GUARANTEE - We are committed to all the precious customers with quality products. If the product let you down, just contact us and we will refund your purchase price as soon as possible. 100% satisfaction.
- See more on Amazon...
Brand: MOTOU | Manufacturer: MOTOU
Weight: 0.49 pounds
See On Amazon #12
iMetrx Nema 17 Stepper Motor 42x60mm 2.1A 2 Phase 4 Wires 1.8 Degrees with 1Meter Cable for 3D Printer Motors
Asin: B097PD2JW3 | Model: DE-42-60*1 | PartNumber: DE-42-60*1
Imetrx 3D Printer Motor Has A Stable Internal Structure Which Enabled The Stepper Motor To Provide Low Noise..
Imetrx Stepper Motor Have Durable Bearing For Long Time Use..
2 Phase, 1.8 Degrees, Compatible With All Fdm 3D Printer That Need 42X60mm Motor..
Imetrx Nema 17 Stepper Motor Has High Torgue And Stronger Power (20-25% Higher Than Normal Motors) And A Lower Resistance Value To Reduce Heating..
Features
- Package include: iMetrx Nema 17 Stepper Motor 42x60mm x1pcs, 1Meter Wiring x1pcs
- iMetrx Nema 17 Stepper Motor has high torgue and stronger power (20-25% higher than normal motors) and a lower resistance value to reduce heating.
- iMetrx 3D printer motor has a stable internal structure which enabled the stepper motor to provide low noise.
- 2 Phase, 1.8 Degrees, Compatible with all FDM 3D printer that need 42x60mm motor.
- iMetrx stepper motor have durable bearing for long time use.
- See more on Amazon...
Brand: iMetrx | Manufacturer: iMetrx
Dimensions: 1.50 x 1.65 x 1.65 inches
See On Amazon #13
Tofelf 2pcs Stepper Motor Driver, Upgraded Version TB6600 Stepper Driver,4A 9-42V 32 Subdivision for Nema 17/23 Stepper Motor Single Axis Hybrid CNC Controller for CNC/42 57 86 Stepper Motor
Asin: B0C64RDCVD | Ean: 0760606098527 | UPC: 760606098527
✿Applicable To Various Stepper Motors Of Nema 17, 23 And 24, Which Work Well With Nema Motors And Can Also Be Used In Various Machines, Such As X-Y-Z Table, Labeling Machine, Laser Cutting Machine, Engraving Machine, Picking Device, Etc..
✿Suitable For College Students, Engineers, Technicians, Factory Individuals, Diy Electronics Enthusiasts, Etc..
✿Built-In Overheat Protection, Under-Voltage Protection And Over-Current Protection, With Energy-Saving Semi-Automatic Current-Lock Function, Single-Chip Pwm Bipolar Sinusoidal Chopper Ensures Low Vibration And High Efficiency.
✿9V-42V Dc Power Supply, Up To 4A In 8 Output Currents, H-Bridge Bipolar Constant Phase Current Drive, Fast Operation And Easy To Connect, Suitable For Long-Term Use.
Features
- Total 32 subdivisions in 6 modes to choose, can control 2-phase stepper motor forward and reverse, smooth operation and high power
- 9V-42V DC power supply, up to 4A in 8 output currents, H-bridge bipolar constant phase current drive, fast operation and easy to connect, suitable for long-term use
- Applicable to various stepper motors of Nema 17, 23 and 24, which work well with Nema motors and can also be used in various machines, such as X-Y-Z table, labeling machine, laser cutting machine, engraving machine, picking device, etc.
- Built-in overheat protection, under-voltage protection and over-current protection, with energy-saving semi-automatic current-lock function, single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency
- Suitable for college students, engineers, technicians, factory individuals, DIY electronics enthusiasts, etc.
- See more on Amazon...
Brand: Tofelf | Manufacturer: Tofelf
See On Amazon #14
Geeetech Nema 42-40 Stepper Motors for 3D Printer with 70CM Cable, X/Y/E-Axis Extruder Step Motor 2 Phase 1.68A 1.8 Degree 40N.M
Asin: B0BMV2F5V4
【Precise Rotation】Perfectly Matched With High-Strength Synchronous Wheels And Synchronous Gears To Achieve Precise And Constant Transmission Ratio, Uniform Rotation And High Transmission Efficiency, While Avoiding System Errors And Obtaining Accurate Results..
【After Sales Guarantee 】If You Need Help, Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly, Our Customer Service Will Respond To You Within 24 Hours..
【Quality Motor】Geeetech 42-40 Stepper Motor Suitable For X/Y/E-Axis Extruder Step Motor 2 Phase 1.68A 1.8 Degree 40N.M. The Connecting Cable Is Included!.
【Low Noise】It's High Quality Motor With Small Power, Uniform Speed, Stable Performance, High Precision, Low Noise, No Loss Of Step In Operation, And Ensures Stable Operation Of The 3D Printer Or Extrusion Mechanism..
Features
- High-Quality This motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 0.4N.m holding torque. Durable and long-lasting.
- Low Noise It's high quality motor with small power, uniform speed, stable performance, high precision, low noise, no loss of step in operation, and ensures stable operation of the 3d printer or extrusion mechanism.
- Precise Rotation Perfectly matched with high-strength synchronous wheels and synchronous gears to achieve precise and constant transmission ratio, uniform rotation and high transmission efficiency, while avoiding system errors and obtaining accurate results.
- Quality Motor Geeetech 42-40 stepper motor suitable for X/Y/E-Axis Extruder Step Motor 2 Phase 1.68A 1.8 Degree 40N.M. The connecting cable is included!
- After Sales Guarantee If you need help, Please kindly contact us(seller) via ask a question find us directly, our customer service will respond to you within 24 hours.
- See more on Amazon...
Brand: Geeetech | Manufacturer: Geeetech
See On Amazon #15
DEVMO BTS7960B 43A Double DC Stepper Motor Driver Module H-Bridge PWM Smart Car Compatible with Ar-duino,Raspberry Pi
Asin: B07SZ4T699 | Ean: 0796753378274 | UPC: 796753378274
★Double Bts7960 H-Bridge Driver Circuit, With A Strong Drive And Braking, Effectively Isolating The Microcontroller And Motor Driver! High-Current 43A.
★Isolated Chip 5V Power Supply (Can Be Shared With The Mcu 5V), Can Also Use The On-Board 5V Supply; The Supply Voltage 5.5V To 27V.
★Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink;.
★Voltage Indication Of Motor Driver Output End; Can Solder Heat Sink.
Features
- Double BTS7960 large current (43 A) H bridge driver . 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board;
- Voltage indication of motor driver output end; can solder heat sink
- Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A
- Voltage indication of motor driver output end; can solder heat sink;
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #16
HiLetgo 2pcs 3D Printer TMC2209 Stepper Motor Drive Module Replace TMC2208 A4988 LV8729 Super Silent
Asin: B0832SK397
Working Voltage: 3V/5V.
Configuration: Step/Dir Or Uart.
Microstepping: 256 Microstepping Subdivisions.
Drive Chip: Tmc2209.
Features
- TMC2209 Stepper Motor Drive Module
- Drive chip: TMC2209
- Working voltage: 3V/5V
- Microstepping: 256 microstepping subdivisions
- Configuration: STEP/DIR OR UART
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
DAOKAI BTS7960 Motor Driver Module 43A High Power Double DC Stepper Motor Driver Module H-Bridge Semiconductor Refrigeration PWM Smart Car Driver Module, for Arduino
Asin: B0B82GXBYF | Model: WE-DA-124 | PartNumber: WE-DA-124
🔋[Motor Forward And Reverse]Can Achieve The Motor Forward Rotation And Reversal Rotation. Two Pwm Input Up To 25Khz Frequency. Two Heat Flow Passing Through An Error Signal Output..
🔋[Package Includes]You Will Get 1 X Bts7960 43A High Power Double Dc Stepper Motor Driver Module, 1 X 8Pin Female To Male Dupont Wire..
🔋[Protective Function]Overcurrent And Overheating Error Signal Output; Over Temperature, Overvoltage, Undervoltage, Overcurrent Protection, Short Circuit Protection..
🔋[74Hc244 Chip]Using 74Hc244 Chip To Effectively Isolate The Microcontroller And Motor Drive. With The Microcontroller 5V Isolation, Effective Protection Of Single-Chip..
Features
- [BTS7960 Chip]H-bridge drive module composed of high-power drive chip BTS7960, with overheating and overcurrent protection. Double BTS7960 large current H bridge driver, limit up to 43A large current output, with a strong drive and brake effects.
- [74HC244 chip]Using 74HC244 chip to effectively isolate the microcontroller and motor drive. With the microcontroller 5V isolation, effective protection of single-chip.
- [Motor forward and reverse]Can achieve the motor forward rotation and reversal rotation. Two PWM input up to 25kHZ frequency. two heat flow passing through an error signal output.
- [Protective function]Overcurrent and overheating error signal output; Over temperature, overvoltage, undervoltage, overcurrent protection, short circuit protection.
- [Package includes]You will get 1 x BTS7960 43A High Power Double DC Stepper Motor Driver Module, 1 x 8Pin Female to Male Dupont Wire.
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #18
3D Printer 42-40 Stepper Motor, 2 Phases 1A 1.8 Degrees 0.4 N.M Stepper Motor for 3D Printer Extruder, Compatible with E-axis of CR-10 Series and Ender-3 Series
Asin: B0B1ZM3R92 | Model: 2032 | PartNumber: 2032
High Quality Stepping Motor: The High Quality Motor With Low Power, Smooth Speed, Stable Performance, Low Noise And No Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
What You Get: 1X 42-40 Stepper Motor (Note: This Item Does Not Include A Connection Cable Or Screws.).
Low Noise: Stepper Motor With Low Noise Level And Efficient Heat Dissipation Has The Large Torque And High Precision Without Losing Step..
1.8 Degree Step Angle, 0.4 N.M Holding Torque, With 0.8 A Rated Current Per Phase..
Features
- Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.).
- 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.
- High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.
- What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)
- See more on Amazon...
Brand: Cyzn | Manufacturer: Cyzn
See On Amazon #19
BTS7960 43A High Power Motor Driver Module Smart Car Driver Current Limit
Asin: B0C2ZTFMXY | Ean: 0755752626359 | UPC: 755752626359
Brand: Reland Sun | Manufacturer: RELAND SUN
See On Amazon #20
STEPPERONLINE E Series Nema 17 Stepper Motor Bipolar Stepper Motor 60Ncm 2.1A Extruder Motor. 3 Pack
Asin: B0C5X36X9R | Model: 3-17HE24-2104S | PartNumber: 3-17HE24-2104S
Nema 17 Bipolar 1.65"X1.65"X2.36" 4-Wire.
Rated Current 2.1A & Resistance 1.7Ohms.
1.8 Deg. Step Angle(200 Steps/Rev).
60Ncm Holding Torque.
Features
- 3 packed, Very High Torque
- 60Ncm holding torque
- NEMA 17 bipolar 1.65x1.65x2.36 4-wire
- 1.8 deg. step angle(200 steps/rev)
- Rated current 2.1A & resistance 1.7ohms
- See more on Amazon...
Brand: STEPPERONLINE | Manufacturer: STEPPERONLINE
Dimensions: 3.00 x 8.00 x 7.00 inches | Weight: 1.20 pounds
See On Amazon
Looking For Something Else?
Search