uxcell Micro PCB Drill Bit Set, 1/8" Shank 0.4mm Solid Tungsten Carbide CNC Engraving Print Circuit Board Drill Bits Rotary Tool 10pcs
Asin: B09TVN4M3T | Model: a22011300ux0113 | PartNumber: a22011300ux0113
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Sharp Cutting Edge: Sharp Cutting Edge Provides Smooth Cutting, Reduces Cutting Force, Prevents Drill Broken, And Improves The Drilling Accuracy. Spiral Chip Space Design For Fast And Clean Chip Removal. The Tool Set Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed..
Tungsten Carbide Tool: Long-Lasting Bits Are Made From Tungsten Carbide For Precise And Easy Experience. Carbide Can Run At Higher Speed Than High-Speed Steel. Carbide Material With Good Milling And Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Drilling Pcb, Acrylic, Plastics, Fiberglass, Wood, Aluminium, Soft Metals. Used On Pcb Drilling Machines, Engraving Machine, Cnc Lathes, Machining Center. Use Vertically And Take Good Control Of Your Cnc Speed..
Features
- PCB Drill Bit: Cutting edge diameter: 0.4mm / 0.02"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
- Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
- Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
- Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Micro PCB Drill Bit
#1
uxcell PCB Drill Bits 1mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZW478JQ
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 5 Pcs 1mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 80mm for Aluminum Alloy
Asin: B09YH826HW | Model: a22022400ux0855 | PartNumber: a22022400ux0855
Extended Drill:The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 1mm / 0.04-inch, Flute Length: 50mm / 1.97-inch, Shank Diameter: 1mm / 0.04-inch, Total Length: 80mm / 3.15-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Micro PCB Drill Bit Set, 1/8" Shank 0.95mm Solid Tungsten Carbide CNC Engraving Print Circuit Board Drill Bits Rotary Tool 10pcs
Asin: B09TVLW3CH | Model: a22011300ux0119 | PartNumber: a22011300ux0119
Sharp Cutting Edge: Sharp Cutting Edge Provides Smooth Cutting, Reduces Cutting Force, Prevents Drill Broken, And Improves The Drilling Accuracy. Spiral Chip Space Design For Fast And Clean Chip Removal. The Tool Set Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed..
Tungsten Carbide Tool: Long-Lasting Bits Are Made From Tungsten Carbide For Precise And Easy Experience. Carbide Can Run At Higher Speed Than High-Speed Steel. Carbide Material With Good Milling And Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Drilling Pcb, Acrylic, Plastics, Fiberglass, Wood, Aluminium, Soft Metals. Used On Pcb Drilling Machines, Engraving Machine, Cnc Lathes, Machining Center. Use Vertically And Take Good Control Of Your Cnc Speed..
Features
- PCB Drill Bit: Cutting edge diameter: 0.95mm / 0.04"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
- Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
- Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
- Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell PCB Drill Bits 1.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWCDRDF | Model: a19091500ux0195 | PartNumber: a19091500ux0195
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.5mm; cutting edge length: 10.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSNLX8 | Model: a19091500ux0218 | PartNumber: a19091500ux0218
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.5mm; cutting edge length: 7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
uxcell PCB Drill Bits 0.3mm-1.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVT1W4L | Model: a19091500ux0227 | PartNumber: a19091500ux0227
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #8
uxcell 10 Pcs 0.4mm HSS(High Speed Steel) W6542 Micro Drill Bits, Fully Ground Jobber 20mm Length Drill Bit for Mild Steel Copper Aluminum
Asin: B09YRJF5H6 | Model: a22030800ux0108 | PartNumber: a22030800ux0108
Fully Ground:The Fully Ground Flute Design, Reduces Friction And Heat, And Increases Drilling Performance..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Flute Treatment:Fully ground, Drill Bit Diameter: 0.4mm / 0.02-inch, Flute Length: 5mm / 0.2-inch, Shank Diameter: 0.4mm / 0.02-inch, Total Length: 20mm / 0.79-inch; 10 x Drill Bits
- High Speed steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Fully Ground The fully ground flute design, reduces friction and heat, and increases drilling performance.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell Micro PCB Drill Bit Set, 1/8" Shank 1.45mm Solid Tungsten Carbide CNC Engraving Print Circuit Board Drill Bits Rotary Tool 10pcs
Asin: B09T374KWJ | Model: a21122300ux0766 | PartNumber: a21122300ux0766
Sharp Cutting Edge: Sharp Cutting Edge Provides Smooth Cutting, Reduces Cutting Force, Prevents Drill Broken, And Improves The Drilling Accuracy. Spiral Chip Space Design For Fast And Clean Chip Removal. The Tool Set Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed..
Tungsten Carbide Tool: Long-Lasting Bits Are Made From Tungsten Carbide For Precise And Easy Experience. Carbide Can Run At Higher Speed Than High-Speed Steel. Carbide Material With Good Milling And Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Drilling Pcb, Acrylic, Plastics, Fiberglass, Wood, Aluminium, Soft Metals. Used On Pcb Drilling Machines, Engraving Machine, Cnc Lathes, Machining Center. Use Vertically And Take Good Control Of Your Cnc Speed..
Features
- PCB Drill Bit: Cutting edge diameter: 1.45mm / 0.057"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
- Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
- Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
- Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 5 Pcs 0.5mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 60mm for Aluminum Alloy
Asin: B09YH6QFP5 | Model: a22022400ux0819 | PartNumber: a22022400ux0819
Extended Drill:The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 0.5mm / 0.02-inch, Flute Length: 35mm / 1.38-inch, Shank Diameter: 0.5mm / 0.02-inch, Total Length: 60mm / 2.36-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 36pcs Pin Vise Hand Drill Bit Set, 0.1mm-1.0mm PCB Drill Bits 10pcs, 0.5mm-3.0mm Micro Twist Drill Bits 25pcs, Precision Pin Vise Rotary Tools, for Metal Wood Plastic
Asin: B0B4WB2NXY | Model: a21121400ux1144 | PartNumber: a21121400ux1144
Precise Pin Vise: Made Of Aluminum Alloy, The Pin Vise Hand Drill Is Durable And Firm. Vise Head Can Be Easily Adjustable To Clamp Different Drill Bits Sizes. Pen Style Design, Compact Size, And Light Weight..
Package Included: 1Pcs X Pin Vise Hand Drill, 10Pcs X 0.1Mm-1.0Mm Pcb Drill Bits (1Pcs Of Each Size), 25Pcs X Twist Drill Bits (5Pcs Of 0.5Mm 0.6Mm Size, 3Pcs Of 1.0Mm Size, 2Pcs Of 1.2Mm 1.5Mm 1.8Mm 2.0Mm 2.35Mm 3.0Mm Size).
Wide Applications: 3-Claw Hardened Steel Chuck Can Firmly Hold Micro Drill Bits. Widely Used For Drilling Precise Holes On Wood, Plastic, Walnut, Amber, Beads, Beeswax, Olive Nut, Small Model Kit And Other Diy Projects. Tips: The Pin Vise Is A Manual Tool Instead Of A Power Tool..
Twist Drill Bits: 9 Different Bits Sizes: 0.5Mm, 0.6Mm, 1.0Mm, 1.2Mm, 1.5Mm, 1.8Mm, 2.0Mm, 2.35Mm, 3.0Mm. High Hardness And Toughness, Wear Resistance. Spiral Chip Space Design For Fast And Clean Chip Removal. Tips: The Drill Bits Are Too Tiny, So It Is Very Fragile. Please Be Careful And Take Good Control Of The Drilling Speed..
Features
- PCB Drill Bits: 10 different sizes: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm; Shank Dia.: 3.175mm / 1/8". High hardness, high wear resistance, high strength, resistance to bending. Used for precision drilling in PC boards, plastic, fiberglass, wood, soft metal.
- Twist Drill Bits: 9 different bits sizes: 0.5mm, 0.6mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.35mm, 3.0mm. High hardness and toughness, wear resistance. Spiral chip space design for fast and clean chip removal. Tips: The drill bits are too tiny, so it is very fragile. Please be careful and take good control of the drilling speed.
- Precise Pin Vise: Made of aluminum alloy, the pin vise hand drill is durable and firm. Vise head can be easily adjustable to clamp different drill bits sizes. Pen style design, compact size, and light weight.
- Wide Applications: 3-claw hardened steel chuck can firmly hold micro drill bits. Widely used for drilling precise holes on wood, plastic, walnut, amber, beads, beeswax, olive nut, small model kit and other DIY projects. Tips: the pin vise is a manual tool instead of a power tool.
- Package Included: 1pcs x Pin Vise Hand Drill, 10pcs x 0.1mm-1.0mm PCB Drill Bits (1pcs of each size), 25pcs x Twist Drill Bits (5pcs of 0.5mm 0.6mm size, 3pcs of 1.0mm size, 2pcs of 1.2mm 1.5mm 1.8mm 2.0mm 2.35mm 3.0mm size)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell PCB Drill Bits 0.1mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSSQBQ | Model: a19091500ux0225 | PartNumber: a19091500ux0225
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.1mm; cutting edge length: 1.7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 26pcs Pin Vise Hand Drill Bit Set, 0.5mm-3.0mm Micro Mini Twist Drill Bits Set 25pcs, Precision Pin Vise Rotary Tools Black, for Metal Wood Plastic PCB Model DIY Making
Asin: B0B4WCNQ29 | Model: a21121400ux1138 | PartNumber: a21121400ux1138
Durable And Precise: Made Of Aluminum Alloy, The Pin Vise Hand Drill Is Durable And Firm. Vise Head Can Be Easily Adjustable To Clamp Different Drill Bits Sizes. Pen Style Design, Compact Size, And Light Weight..
Package Included: 1Pcs X Pin Vise Hand Drill, 25Pcs X Twist Drill Bits (5Pcs Of 0.5Mm 0.6Mm Size, 3Pcs Of 1.0Mm Size, 2Pcs Of 1.2Mm 1.5Mm 1.8Mm 2.0Mm 2.35Mm 3.0Mm Size).
Wide Applications: 3-Claw Hardened Steel Chuck Can Firmly Hold Micro Drill Bits. Widely Used For Drilling Precise Holes On Wood, Plastic, Walnut, Amber, Beads, Beeswax, Olive Nut, Small Model Kit And Other Diy Projects. Tips: The Pin Vise Is A Manual Tool Instead Of A Power Tool..
High-Speed Steel Bits: Features High Hardness And Toughness, Heat Resistance, Wear Resistance, Suitable For A Wide Range Of Applications. Sharp Cutting Edge Provides Smooth Cutting. Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Features
- Drill Bits Set: 9 different bits sizes: 0.5mm, 0.6mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.35mm, 3.0mm. Spiral chip space design for fast and clean chip removal. Tips: The drill bits are too tiny, so it is very fragile. Please be careful and take good control of the drilling speed.
- High-speed steel Bits: Features high hardness and toughness, heat resistance, wear resistance, suitable for a wide range of applications. Sharp cutting edge provides smooth cutting. Can work quickly and cleanly, no glitches or scrap left.
- Durable and Precise: Made of aluminum alloy, the pin vise hand drill is durable and firm. Vise head can be easily adjustable to clamp different drill bits sizes. Pen style design, compact size, and light weight.
- Wide Applications: 3-claw hardened steel chuck can firmly hold micro drill bits. Widely used for drilling precise holes on wood, plastic, walnut, amber, beads, beeswax, olive nut, small model kit and other DIY projects. Tips: the pin vise is a manual tool instead of a power tool.
- Package Included: 1pcs x Pin Vise Hand Drill, 25pcs x Twist Drill Bits (5pcs of 0.5mm 0.6mm size, 3pcs of 1.0mm size, 2pcs of 1.2mm 1.5mm 1.8mm 2.0mm 2.35mm 3.0mm size)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Micro PCB Drill Bit Set, 1/8" Shank 3.175mm Solid Tungsten Carbide CNC Engraving Print Circuit Board Drill Bits Rotary Tool 10pcs
Asin: B09TVM5NZZ | Model: a22011300ux0106 | PartNumber: a22011300ux0106
Sharp Cutting Edge: Sharp Cutting Edge Provides Smooth Cutting, Reduces Cutting Force, Prevents Drill Broken, And Improves The Drilling Accuracy. Spiral Chip Space Design For Fast And Clean Chip Removal. The Tool Set Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed..
Tungsten Carbide Tool: Long-Lasting Bits Are Made From Tungsten Carbide For Precise And Easy Experience. Carbide Can Run At Higher Speed Than High-Speed Steel. Carbide Material With Good Milling And Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Drilling Pcb, Acrylic, Plastics, Fiberglass, Wood, Aluminium, Soft Metals. Used On Pcb Drilling Machines, Engraving Machine, Cnc Lathes, Machining Center. Use Vertically And Take Good Control Of Your Cnc Speed..
Features
- PCB Drill Bit: Cutting edge diameter: 3.175mm / 0.13"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
- Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
- Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
- Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell PCB Drill Bits 1.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 5 Pcs
Asin: B07ZWH4C1P | Model: a19091500ux0188 | PartNumber: a19091500ux0188
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.2mm; cutting edge length: 10.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 5 Pcs 2mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 100mm for Aluminum Alloy
Asin: B09YR2Q41J | Model: a22022400ux0801 | PartNumber: a22022400ux0801
Extended Drill:The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 2mm / 0.08-inch, Flute Length: 60mm / 2.36-inch, Shank Diameter: 2mm / 0.08-inch, Total Length: 100mm / 3.94-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 10 Pcs 0.8mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 80mm for Aluminum Alloy
Asin: B09YH7M635 | Model: a22022400ux0850 | PartNumber: a22022400ux0850
Extended Drill:The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 0.8mm / 0.03-inch, Flute Length: 50mm / 1.97-inch, Shank Diameter: 0.8mm / 0.03-inch, Total Length: 80mm / 3.15-inch; 10 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)
Asin: B07ZVSZ123 | Model: a19091500ux0219 | PartNumber: a19091500ux0219
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.5mm; cutting edge length: 7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #19
uxcell PCB Drill Bits 0.3mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 2 Set (20 Pcs)
Asin: B07ZVSR2TX | Model: a19091500ux0215 | PartNumber: a19091500ux0215
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.3mm; cutting edge length: 5.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #20
uxcell 10pcs 0.75mm Tip Spiral Flute Tungsten Carbide Micro PCB Drill Bits
Asin: B00PZYKOIO | Model: a14082700ux0303 | PartNumber: a14082700ux0303 | Ean: 0702105782668 | UPC: 702105782668
Shank Diameter : 3.175Mm;Total Length : 37 Mm / 1.5".
Package Content : 10 X Pcb Drill Bits1 X Plastic Case.
Color : Silver Tone;Weight : 43G.
Cutting Diameter : 0.75Mm / 0.03";Cutting Depth : 10Mm / 0.39".
Features
- Product Name : PCB Drill Bit;Material : Tungsten Carbide
- Cutting Diameter : 0.75mm / 0.03;Cutting Depth : 10mm / 0.39
- Shank Diameter : 3.175mm;Total Length : 37 mm / 1.5
- Color : Silver Tone;Weight : 43g
- Package Content : 10 x PCB Drill Bits1 x Plastic Case
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.12 x 1.46 x 0.12 inches | Weight: 0.09 pounds
See On Amazon
Looking For Something Else?
Search