LS Swap Exhaust Header 1-3/4 x 3 in. 304 Stainless Steel for 1960-1998 C10 C1500 Silverado Sierra Suburban 2WD Truck LS1 LS2 LS3 LS6 LS7
Asin: B09VD9ZDPS | Ean: 9339036835258
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fully Mandrel Bent Tubes Made Of 16-Gauge (1.5Mm Thickness) 304 Stainless Steel.
Polished Surface For Extra Resistance Against Rusting; All Joints Tig Welded For Great Resistance Against Cracking And Wearing.
Head Flange Laser-Cut From 3/8-Inch (9.5Mm) Thick Steel Plates And Flattened By Hydraulic Press; With Chrome Coating.
Full Length Pipe Layout For Power Gain At Mid To High Rpm.
Features
- Designed for swapping LS-based V8 engines (LS1, LS2, LS3, LS6, LS7, etc.) into older cars and truck
- Full length pipe layout for power gain at mid to high RPM
- Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel
- Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press; with chrome coating
- Polished surface for extra resistance against rusting; all joints TIG welded for great resistance against cracking and wearing
- See more on Amazon...
Brand: PG POWERGO MOTORSPORT | Manufacturer: PowerGo Motorsport
Dimensions: 9.00 x 37.00 x 15.00 Inches | Weight: 25.00 Pounds
See On Amazon Similar To LS Swap Exhaust Header 13
#1
Michigan Motorsports LS Multi Layer MLS Header Manifold Exhaust Gasket Like 12617944 LS1 LS2 LS3 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 6.2
Asin: B08D8PRTW7
Qty 2- Ls Multi Layer Exhaust Gasket.
Fits Gen Iii/Gen Iv 12617944 12600530.
Ls1 Ls2 Ls6 4.8 5.3 5.7 6.0.
These Exhaust Manifold Gaskets Will Provide A Leak-Free Seal When Installing Your Exhaust Manifolds. These Exhaust Manifold Gaskets Are Made Of High-Grade Materials To Reduce The Chance Of A Blowout Under High Exhaust Temperatures Or Pressure..
Features
- LS Multi Layer Exhaust Gasket Replacement for 12617944 12600530 LS1 LS2 LS6 LQ4 LQ9 4.8 5.3 5.7 6.0 A Pair of Gaskets
- These exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. These exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure.
- QTY 2- LS Multi Layer Exhaust Gasket
- LS1 LS2 LS6 4.8 5.3 5.7 6.0
- Fits Gen III/Gen IV 12617944 12600530
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.50 x 17.50 x 3.50 inches
See On Amazon #2
AUTO MART Exhaust Header LS Conversion Swap for Chevy C10 Camaro GMC Chevrolet Silverado LS1 LS2 LS3 4.8L 5.3L 5.7L
Asin: B0C4HNMF2F | Model: AM-28937 | PartNumber: AM-28937
Welding Process: Our Exhaust Manifold Is Crafted Using An Excellent Welding Process, Ensuring A Wear-Resistant And Anti-Cracking Product That Can Withstand High Temperatures. These Headers Are Engineered For Long Lasting Durability, Thanks To Their Robust Construction And Use Of Premium Materials..
Secure Packaging: Our Exhaust Headers Are Accompanied By Gaskets And Exhaust Manifold Bolts For Ease Of Installation. We Take Pride In Providing Firm Packaging To Make Sure The Package Doesn't Get Damaged During Shipping. In Case Of Any After-Sales Issues, Please Contact Us In Time..
Easy Installation: Our Engine Conversion Headers Feature A Unique Design That Simplifies Installation. However, For Optimal Results, We Suggest Taking It To A Pro Installation Shop..
Material: Our Exhaust Headers Are Made Of 304 Stainless Steel Material, Ensuring Exceptional Durability And Corrosion Resistance. Even In Bad Weather Conditions, The Robust Design Of Our Headers Includes A 7/16" Steel Plate Head Flange, Providing Superior Strength And Rigidity To Prevent Cracking Or Bending While Ensuring A Secure Seal..
Features
- COMPATIBILITY Is Swap Headers for 1960-1986 C10 LS Chevy GMC LS1 LS2 LS3 LS6 LS9, V8 Engines Only
- Material: Our exhaust headers are made of 304 stainless steel material, ensuring exceptional durability and corrosion resistance. even in bad weather conditions, The robust design of our headers includes a 7/16 steel plate head flange, providing superior strength and rigidity to prevent cracking or bending while ensuring a secure seal.
- Welding Process: Our exhaust manifold is crafted using an excellent welding process, ensuring a wear-resistant and anti-cracking product that can withstand high temperatures. These headers are engineered for Long lasting durability, thanks to their robust construction and use of premium materials.
- Easy Installation: Our engine conversion Headers feature a unique design that simplifies installation. However, for optimal results, we suggest taking it to a pro installation shop.
- Secure Packaging: Our Exhaust Headers are accompanied by gaskets and exhaust manifold bolts for Ease of installation. We take pride in providing firm packaging to Make sure the package doesn't get damaged during shipping. In case of any after-sales issues, Please contact us in time.
- See more on Amazon...
Brand: AUTO MART | Manufacturer: AUTO MART
Warranty: 90 Day
See On Amazon #3
iiLentes Exhaust Manifold Header Bolts Hardware Kit For LS1 HEADER BOLTS LSX LS2 LS3 LS6 LS7 GM Vortec 4.8L 5.3L 6.0L 6.2L 03413B 11518860 11609481
Asin: B0BZYFCXT4 | Model: BS-901-053 | PartNumber: BS-901-053
Long-Lasting Performance - Made From High-Quality Components, This Kit Is Built To Last And Ensure Reliable Performance For A Long Service Life..
This Kit Includes A Set Of 12 High-Quality Replacement Parts, Including Part Numbers 03413B, 11518860, 11546600, 11609481, 6506775Aa, And 6507423Aa..
Easy Fitment - To Ensure This Part Fits Your Exact Vehicle, Simply Input Your Make, Model, And Trim Level Into The Garage Tool..
Reliable Replacement - If You're Missing Or Have Damaged Or Failed Hardware, This Kit Is The Ideal Solution For A Reliable Replacement..
Features
- Perfect fit - This exhaust manifold hardware kit is designed to match the original hardware required to secure the exhaust manifold to the engine on specified vehicles, ensuring a perfect fit.
- Reliable replacement - If you're missing or have damaged or failed hardware, this kit is the ideal solution for a reliable replacement.
- Long-lasting performance - Made from high-quality components, this kit is built to last and ensure reliable performance for a long service life.
- Easy fitment - To ensure this part fits your exact vehicle, simply input your make, model, and trim level into the garage tool.
- This kit includes a set of 12 high-quality replacement parts, including part numbers 03413B, 11518860, 11546600, 11609481, 6506775AA, and 6507423AA.
- See more on Amazon...
Brand: iiLentes | Manufacturer: iiLentes
Dimensions: 0.50 x 6.50 x 5.50 inches | Weight: 0.49 pounds
Warranty: 1 YEAR
See On Amazon #4
HABIIID Exhaust Manifold Bolts, Manifold Header Bolts for GM LS1 LS3 LS2 LSX LT series engines Replaces ICT Billet 551696 12 PCS
Asin: B0B3Y55DHR | Ean: 0716035764304 | UPC: 716035764304
Fits All Gm Ls & Lt Series Engines 1997-Up.
Grade 10.9, M8-1.25 X 25Mm. Pack Of 12.
Reliable Replacement For The Original Hardware That Is Missing Or Damaged, Or Has Failed.
Compatible With Gm Chevrolet Chevy Ls1 Ls3 Ls2 Lsx Lt Engines 551696 Bolt Kit Only Silver.
Features
- Aftermarket exhaust manifold flanged bolts,contains 12 pcs
- Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver
- Fits all GM LS & LT series engines 1997-up
- Reliable replacement for the original hardware that is missing or damaged, or has failed
- Grade 10.9, M8-1.25 x 25mm. Pack of 12
- See more on Amazon...
Brand: HABIIID | Manufacturer: HABIIID
See On Amazon #5
ZBPRESS Exhaust Header, Universal LS Swap S10 Conversion Headers (LS1, LS2, LS3, LS6, LS Engines) Truck & SUV, 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Engines, V8 engines ONLY(Models Shown in Figure II)
Asin: B09YDCS3ZP | Ean: 0723496793200 | UPC: 723496793200
【Quality Materials】: Forged From High Quality Stainless Steel, Welding Process, Surface Polishing Treatment, With Good Corrosion Resistance And Sealing, Long Service Life, High Safety..
【Improve Performance】: The Inner Wall Is Smooth, No Burrs, Ultrasonic Cleaning, To Ensure That There Is No Impurities Inside The Tube,Smooth Airflow And Stable Performance，Can Increase 10-15 Horsepower..
【Precision Manufacturing】: Cnc Precision Casting Method Produces Flange, Making Its Surface Smooth And Not Easy To Deformation. Every Step Of Manufacturing Is Precisely Positioned To Ensure The Precision Of Products And Suitable For Loading..
【Easy To Install & Use】: Headers Kit Contains 2 Pieces Of Exhaust Pipe And Gaskets, Bolts And Screws Required For Installation. Meet Your Diy Needs. For Better Product Experience, You Are Advised To Install It Under Professional Guidance..
Features
- Compatible with : Fit for 1982-2004 Chevrolet S10 Truck/ GMC Sonoma Truck; Fit for 1982-2005 Chevrolet S10 Blazer/ GMC Jimmy; Fit for 1991-2001 Oldsmobile Bravada SUV.
- Easy to Install & Use : Headers Kit contains 2 pieces of exhaust pipe and gaskets, bolts and screws required for installation. Meet your DIY needs. For better product experience, you are advised to install it under professional guidance.
- Quality materials : Forged from high quality stainless steel, welding process, surface polishing treatment, with good corrosion resistance and sealing, long service life, high safety.
- Precision Manufacturing : CNC precision casting method produces flange, making its surface smooth and not easy to deformation. Every step of manufacturing is precisely positioned to ensure the precision of products and suitable for loading.
- Improve Performance : The inner wall is smooth, no burrs, ultrasonic cleaning, to ensure that there is no impurities inside the tube,Smooth airflow and stable performance Can increase 10-15 horsepower.
- See more on Amazon...
Brand: ZBPRESS | Manufacturer: BLTPress
See On Amazon #6
ARP 134-1202 Chromoly Header Bolt Kits, Chevrolet Gen III/LS Series, 3/8 wide
Asin: B00E5YSJ5U | Model: 134-1202 | PartNumber: 134-1202 | Ean: 0672036041984 | UPC: 672036041984
Fastener Style: Bolt.
Fastener Material: Steel.
Brand: ARP | Manufacturer: ARP, Inc.
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.60 pounds
Warranty: Manufacturer Warranty
See On Amazon #7
Z Whip Stainless Steel LS Header Exhaust Manifold Bolt Kit. Compatible with all GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L Hardened SS 304 (18-8) Bolts
Asin: B08N1LD6LX | Model: 99447804 | PartNumber: 99447804 | Ean: 0810065200280 | UPC: 810065200280
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Meets Or Exceeds Industry Standard Asme / Ansi Specifications.
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
Compatible With All Ls Series Engines 1997-2014 Ls1, Ls2, Ls3, Ls6, Ls7, Ls9, Gm Vortec 4.8L 5.3L 6.0L 6.2L With Oem Exhaust Manifolds & Aftermarket Headers. Also Fits Lsx Lm7 Lr4 Lq4 Lq9 L33 Lh6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines.
Features
- Set of 12 Hardened 304 (18-8) Stainless Steel Bolts. These will not Rust or Corrode.
- Compatible with all LS Series Engines 1997-2014 LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8L 5.3L 6.0L 6.2L with OEM Exhaust Manifolds & Aftermarket Headers. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- Meets or Exceeds Industry Standard ASME / ANSI Specifications
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
See On Amazon #8
LS HEADER STUD KIT BOLTS STAINLESS STEEL LSX LS2 LS3 LS6 LS7 4.8 5.3 6.0 6.2L
Asin: B0B1PFWCS7
Fits Gen Iii, Iv Lsx (4.8 5.3 6.0 6.2L Vortec) Truck Engines..
(12) M8 Studs (Polished); (12) M8 Hex Locking Flange Nuts.
Hardened 304 Stainless Steel.
Fits Gen Iii, Iv Lsx (Ls1 Ls2 Ls3 Ls6 Ls7) Chevy V8 Engines..
Features
- LS HEADER STUD KIT BOLTS STAINLESS STEEL LSX LS2 LS3 LS6 LS7 4.8 5.3 6.0 6.2L
- Fits GEN III, IV LSX (LS1 LS2 LS3 LS6 LS7) Chevy V8 Engines.
- Fits GEN III, IV LSX (4.8 5.3 6.0 6.2L Vortec) Truck Engines.
- Hardened 304 Stainless Steel
- (12) M8 Studs (polished); (12) M8 Hex Locking Flange Nuts
- See more on Amazon...
Brand: 269 Motorsports | Manufacturer: 269 Motorsports
See On Amazon #9
Michigan Motorsports LS MLS Exhaust Header Manifold Gasket Pair with Bolts 4.8 5.3 5.7 6.0 6.2
Asin: B0CB773WB7
Includes 2 Mls Header/Manifold Gaskets And 12 Bolts -Enough For Both Heads.
Fits Gen Iii/Gen Iv 12617944 12600530.
Multilayer Steel (Mls) Gaskets Like Gm 12617944. Flanged Grade 10.9 Bolts M8 X 1.25 Thread 25Mm Underhead Length Fits Factory Exhaust Manifolds And Aftermarket Headers. Torque Spec For M8 Exhaust Bolts Is 18 Ft-Lb.
Fits All 1997-2013 Gen 3/4 Ls Based V8 Engines Including: Ls1 Ls2 Ls3 Ls6 Lq4 Lq9 Lm7 4.8 5.3 5.7 6.0 6.2.
Features
- LS Multi Layer Steel Exhaust Manifold Header Gasket Pair with 12pc Bolt Set
- Fits all 1997-2013 Gen 3/4 LS Based V8 Engines Including: LS1 LS2 LS3 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0 6.2
- Includes 2 MLS header/manifold gaskets and 12 bolts -Enough for both heads
- Multilayer Steel (MLS) Gaskets Like GM 12617944. Flanged Grade 10.9 Bolts M8 x 1.25 thread 25mm Underhead Length Fits Factory Exhaust Manifolds and Aftermarket Headers. Torque Spec for M8 exhaust bolts is 18 ft-lb
- Fits Gen III/Gen IV 12617944 12600530
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Dimensions: 0.50 x 17.50 x 3.50 inches
See On Amazon #10
3mirrors Engine Exhaust Manifold Bolt Repair Kit Compatible with Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Trucks
Asin: B087NCBLRB | Ean: 7790262221673
Brackets Are Constructed From 1/4" Thick Premium Steel Sheet, Stamped And Gusseted. It Is Attached To The Cylinder Head Using Pre-Drilled Holes In The Side Of The Cylinder Head. Durability And Long Life..
The Exhaust Manifold Bolt Repair Kit Compatible With L20, L31, L33, L59, L76, L77, L83, L86, L8t, L92, L94, L96, L98, L99, L9h, Lc9, Lfa, Lh6, Lh8, Lm4, Lm7, Lmg, Lq4, Lq9, Lr4, Ls1, Ls2, Ls3, Ls4, Ls6, Ls7, Ls9, Lsa, Lsx376, Lsx454, Lsx454r, Lt1, Lt2, Lt4, Lt5, Ly2, Ly5, Ly6, Lz1.(Fits These Gm Vehicles: Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
Full Kit Comes With Necessary Blocks, 2X Grade 8.8 Outer Hexagon Color-Zinc Bolts, Bolts, And 2X 1.5Mm Washers For Solid Repair. Direct Diy! Confidence To Buy, Any Product Problems, Direct Contact Us For A Free Replacement!.
This Kit Fits Egr Applications. The Exhaust Manifold Bolt Repair Bracket Will Eliminate Exhaust Noise And Repair The Exhaust Leak Without Having To Remove The Cylinder Head Or Drill Out And Replace The Broken End Bolts! Save Your Time And Money..
Features
- This Exhaust Manifold Repair Clamp Kit is used to repair Driver's Side Rear and Passenger Side Front. Compatible with 1999-Current 4.8 5.3 6.0 6.2L V8 GM Trucks, Sierra, Silverado, G-Series Vans, Pontiac G8, Envoy V8, Hummer, GM SUVs and more.
- This kit fits EGR applications. The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money.
- Brackets are constructed from 1/4 thick premium steel sheet, stamped and gusseted. It is attached to the cylinder head using pre-drilled holes in the side of the cylinder head. Durability and long life.
- Full Kit comes with necessary blocks, 2x Grade 8.8 Outer hexagon Color-Zinc Bolts, bolts, and 2x 1.5mm Washers for solid repair. Direct DIY! Confidence to buy, any product problems, direct contact us for a free replacement!
- The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T, L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4, LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4, LT5, LY2, LY5, LY6, LZ1.(Fits these GM Vehicles: Silverado, Sierra, Yukon, Denali, Escalade, Hummer )
- See more on Amazon...
Brand: 3mirrors | Manufacturer: 3mirrors
See On Amazon #11
ICT Billet USA Bolts KIT ONLY LS LT Exhaust Manifold/Header Flange Bolts LS1 LS3 LS2 LSX ICT LM7 LR4 LQ4 LS6 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 LT1 551696
Asin: B00NY4VCEW | Ean: 0656729842515 | UPC: 656729842515
Zinc Coated For Long Lasting Corrosion Protection And Prevents Threads From Seizing.
All Ict Billet Metric Flange Bolts Are Custom Made For Us, Right Here In The Usa!!.
No Washers Needed With These Flanged Headed Jis Spec Bolts.
Heavy Duty, High Strength, Grade 10.9 Bolts.
Features
- Made in the USA bolts
- Heavy duty, high strength, grade 10.9 bolts
- Zinc coated for long lasting corrosion protection and prevents threads from seizing
- No washers needed with these flanged headed JIS spec bolts
- All ICT Billet metric flange bolts are custom made for us, right here in the USA!!
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 3.00 x 3.00 inches
See On Amazon #12
BuliBoao LS MLS Exhaust Manifold Header Gasket Pair W/Bolts for Chevy GMC 4.8 5.3 6.0L 1998-2016 551696, 12617944
Asin: B0C2PV77NR
Made From Multi-Layer Steel (Mls) That Is Designed To Withstand High Temperatures And Provide A Reliable Seal..
Please Check The Model And Part Number Of The Item Fits For Your Vehicle Or Not Before Ordering..
Helps To Reduce Noise And Vibration For A Quieter, Smoother Ride..
Compatible For All Ls Series Engines (Except Ls7) Ls1 Lm7 Lr4 Lq4 Ls6 L59 Lq9 Lm4 L33 Ls2 Lh6 L92 L76 Ly2 Ly5 Ly6 Lc9 Lfa Lh8 Lmg Ls3 L98 L9h L20 L94 Lz1 L99 L96 Lc8 L77.
Features
- Manufacturer Part Number: 551696,12617944
- Compatible for all LS series engines (except LS7) LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77
- Made from multi-layer steel (MLS) that is designed to withstand high temperatures and provide a reliable seal.
- Helps to reduce noise and vibration for a quieter, smoother ride.
- Please check the model and part number of the item fits for your vehicle or not before ordering.
- See more on Amazon...
Brand: BuliBoao | Manufacturer: BuliBoao
See On Amazon #13
Michigan Motorsports LS & LT Exhaust Manifold Header Bolts 12pc -Fits 1997-2021 LS1 LT1 4.8 5.3 5.7 6.0 6.2 7.0
Asin: B09HY3VR6G | Model: AD141 | PartNumber: AD141
Compatible With All Gm Ls & Lt Based Gen 3/4/5 Car And Truck Engines.
M8 X 1.25 Thread 25Mm Underhead Length Fits Factory Exhaust Manifolds And Aftermarket Headers.
Flanged Grade 10.9 Bolts Torque Spec For M8 Exhaust Bolts Is 18 Ft-Lb.
Fits All 1997-Newer Ls & Lt Based Gm V8 Car And Truck Engines.
Features
- Michigan Motorsports Exhaust Manifold & Header Bolt 12pc Set
- Fits all 1997-newer LS & LT Based GM V8 Car and Truck Engines
- Compatible with all GM LS & LT Based Gen 3/4/5 Car and Truck Engines
- Flanged Grade 10.9 Bolts Torque Spec for M8 exhaust bolts is 18 ft-lb
- M8 x 1.25 thread 25mm Underhead Length Fits Factory Exhaust Manifolds and Aftermarket Headers
- See more on Amazon...
Brand: Michigan Motorsports | Manufacturer: Michigan Motorsports
Warranty: 30 Days
See On Amazon #14
Conversion Swap Headers C10 LS LSX FOR Chevy GMC Chevrolet Camaro Caprice Silverado Pickup Truck LS1 LS2 LS3 LS6 LS7 4.8L 5.3L 5.7L
Asin: B07HSTX7L4 | Ean: 0792585100502 | UPC: 792585100502
Professionally Tigged Welds.
Works Well With Cars That Have A Center Crossmember Under The Engine.
Angled Spark Plug Boots Required For Clearance.
Features
- Note: "For LS series engine swaps only" These do not work on standard SBC or BBC
- Angled spark plug boots required for clearance
- Professionally Tigged Welds
- Works well with cars that have a center crossmember under the engine
- See more on Amazon...
Brand: Ispeedytech
See On Amazon #15
Exhaust Headers 1-3/4 in. Stainless Steel Polished Finish for 2003-2006 Silverado Sierra Suburban 1500 1500HD 2500 2500HD 6.0L V8
Asin: B09VD8J9ZV | Ean: 9339036834275
Fully Mandrel Bent Tubes Made Of 16-Gauge (1.5Mm Thickness) 304 Stainless Steel.
All Joints Tig Welded For Great Resistance Against Cracking And Wearing; Polished Surface For Extra Resistance Against Rusting.
Head Flange Laser-Cut From 3/8-Inch (9.5Mm) Thick Steel Plates And Flattened By Hydraulic Press; With Chrome Coating.
Most Efficient At Providing Horsepower Gain From Idle To Mid-Range Rpm.
Features
- Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes
- Most efficient at providing horsepower gain from idle to mid-range RPM
- Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel
- Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press; with chrome coating
- All joints TIG welded for great resistance against cracking and wearing; Polished surface for extra resistance against rusting
- See more on Amazon...
Brand: PG POWERGO MOTORSPORT | Manufacturer: PowerGo Motorsport
Dimensions: 6.00 x 22.00 x 15.00 inches | Weight: 19.00 Pounds
See On Amazon #16
LS Header Exhaust Manifold Bolts kit FOR all GM Chevy LS Series Engines LS1 LS3 LS2 LSX LM7 LR4 LQ4 LS6 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 5.3L 6.0L 6.2L
Asin: B0C58SYDB1
Heavy Duty, High Strength, Grade 8.8 Bolts,Zinc Coated For Long Lasting Corrosion Protection And Prevents..
Fits Ls1 Ls3 Ls2 Lsx Ict Lm7 Lr4 Lq4 Ls6 Lq9 L33 Lh6 L92 L76 L99 L96 L82 L83 L84 L86 L87.
Compatible With All Gm Ls & Lt (Gen 5) Series Engines 1997-Up.
No Washers Needed With The Flanged Headed Jis Spec Bolts.
Features
- 12PCS M8*1.25-25MM LS LT Exhaust Manifold/Header Flange Bolts
- No washers needed with the Flanged headed JIS spec bolts
- Heavy duty, high strength, grade 8.8 bolts,Zinc coated for long lasting corrosion protection and prevents.
- Compatible With All Gm Ls & Lt (Gen 5) Series Engines 1997-Up
- FITS LS1 LS3 LS2 LSX ICT LM7 LR4 LQ4 LS6 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87
- See more on Amazon...
Brand: Larlansz | Manufacturer: Larlan
See On Amazon #17
Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8
Asin: B09VD1YJVS | Ean: 9339036834954
Fully Mandrel Bent Tubes Made Of 16-Gauge (1.5Mm Thickness) Cold Roll Flash Mild Steel.
All Joints Tig Welded For Great Resistance Against Cracking And Wearing; Hi-Temp Paint That Holds Up To 500C Or 932F.
Head Flange Laser-Cut From 3/8-Inch (9.5Mm) Thick Steel Plates And Flattened By Hydraulic Press.
Most Efficient At Providing Horsepower Gain From Idle To Mid-Range Rpm.
Features
- Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes
- Most efficient at providing horsepower gain from idle to mid-range RPM
- Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel
- Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press
- All joints TIG welded for great resistance against cracking and wearing; Hi-temp paint that holds up to 500C or 932F
- See more on Amazon...
Brand: PG POWERGO MOTORSPORT | Manufacturer: PowerGo Motorsport
Dimensions: 7.00 x 22.00 x 15.00 inches | Weight: 19.00 Pounds
See On Amazon #18
GM LS Swap Cast Iron Exhaust Manifold LS1 LS2 LS3 4.8L 5.3L 6.0L Street Rod (DM-3303)
Asin: B09Z6LJH2H | Model: DM-3303 | PartNumber: DM-3303 | Ean: 0619222466282 | UPC: 619222466282
They Are Cast From High Silicon Moly Ductile Iron To Provide Durability, Leak Free Performance And Less Under The Hood Noise Than Conventional Headers..
They Also Feature 304 Stainless Steel Mating Flanges To Help Provide A Leak-Free Installation, And A Two Bolt Exit Flange Which Can Be Used With Oem Style Gaskets And Fasteners For An Excellent Seal..
The Ls Cast Iron Exhaust Manifolds Are Recommended For Strong Performance On Engines Up To 500 Horsepower And Are Available In Plain As Cast Finish Or With Ceramic Coatings For Reduced Engine Temperatures And Improved Corrosion Resistance..
Their Contoured Design Aims The Exhaust Directly At The Exit Port For Greatly Improved Flow..
Features
- These LS cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement engine swap applications.
- Their contoured design aims the exhaust directly at the exit port for greatly improved flow.
- They are cast from high silicon moly ductile iron to provide durability, leak free performance and less under the hood noise than conventional headers.
- The LS cast iron exhaust manifolds are recommended for strong performance on engines up to 500 horsepower and are available in plain as cast finish or with ceramic coatings for reduced engine temperatures and improved corrosion resistance.
- They also feature 304 stainless steel mating flanges to help provide a leak-free installation, and a two bolt exit flange which can be used with OEM style gaskets and fasteners for an excellent seal.
- See more on Amazon...
Brand: N\D | Manufacturer: N\D
See On Amazon #19
ZONFANT Exhaust Manifold Header Gaskets with Bolts Compatible with Chevy GMC Cadillac Pontiac Vehicle LS MLS LS1 LS2 LS3 LS6 LQ4 LQ9 LM7 4.8L 5.3L 5.7L 6.0L 6.2L, Replace#12617944 551696
Asin: B0D2PYMRCD
【High Performance】 - Exhaust Manifold Gasket With Bolts Made Of Multi-Layer Steel That Are Able To Withstand High Temperatures. Its Equivalent Parts Fully Comply With The Original Manufacturer's Specifications And Functions..
【After-Sales Service】 - We Have 1 Year Warranty, Worry-Free Return And Refund Policy. Please Buy With Confidence! If You Have Any Questions About Our Product, Please Contact Us, We Will Deal With It As Soon As Possible!.
【Direct Fit & Easy To Install】 - This Mls Exhaust Manifold Gasket Is Easy To Install And Directly To Replace The Old One. Saving Your Time And Money By Replacing It Yourself. ( Package Include : 2 X Mls Header, 12 X Bolt. ).
【Compatible Vehicle】 - The Engine Exhaust Manifold Header Gasket Set Compatible With All Ls Series Engines (Except Ls7) Ls1 Lm7 Lr4 Lq4 Ls6 L59 Lq9 Lm4 L33 Ls2 Lh6 L92 L76 Ly2 Ly5 Ly6 Lc9 Lfa Lh8 Lmg Ls3 L98 L9h L20 L94 Lz1 L99 L96 Lc8 L77..
Features
- Replacement Part Number - 12617944, 551696. Before ordering, please confirm compatibility and weather are suitable for your vehicle!
- Compatible Vehicle - The engine exhaust manifold header gasket set compatible with all LS series engines (except LS7) LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77.
- High Performance - Exhaust manifold gasket with bolts made of multi-layer steel that are able to withstand high temperatures. Its equivalent parts fully comply with the original manufacturer's specifications and functions.
- Direct Fit & Easy To Install - This MLS exhaust manifold gasket is easy to install and directly to replace the old one. Saving your time and money by replacing it yourself. ( Package Include : 2 x MLS Header, 12 x Bolt. )
- After-Sales Service - We have 1 year warranty, Worry-free Return and Refund Policy. Please Buy With Confidence! If you have any questions about our product, please contact us, we will deal with it as soon as possible!
- See more on Amazon...
Brand: ZONFANT | Manufacturer: ZONFANT AUTO PARTS
See On Amazon #20
Chromoly Header Bolt Kits Compatible with Chevy Gen III, Chevy LS Series with 4.8, 5.3, 6.0, 6.2 litres, 3/8 Wide, Set of 12 Replace # 134-1202
Asin: B0BVBHM2KC
【Fits】Compatible With Chevy Gen Iii, Chevy Ls Series And Other Vehicles Which Engine With 4.8, 5.3, 6.0, 6.2 Litres, Please Make Sure That Your Header Flange Is 3/8"..
【12-Month Warranty】 If For Any Reason At All, You Are Not Fully Satisfied With The Ls Engine Header Bolts , Simply Contact Us Through Amazon Message At Any Time. We Will Provide Comprehensive Quality Assurance For Our Product..
【Stronger】The Gen Iii Header Bolts Are Rated At 170,000 Psi, They're Much Stronger Than Original Parts, And Will Last Under Even The Most Severe Conditions. 100% Rigorously Tested Before Shipping..
【Premium Quality】Long Life-Span Matters, That Is Why Our Exhaust Manifold Bolt Kits Are Composed Of High-Quality Chromoly Steel, Which Can Effectively Prevent Corrosion And Rust, Greatly Increase The Service Life Even In Humid Environment..
Features
- NEEDS As time goes on, your manifold developed a problem where it leaks and makes noise. Beacause of the bolts are rust or breaking, which will affect the safety level, and the tightness will decline. Simply replace this header flange to make sure safe and eliminate strange sound.
- PREMIUM QUALITY Long life-span matters, that is why our exhaust manifold bolt kits are composed of high-quality chromoly steel, which can effectively prevent corrosion and rust, greatly increase the service life even in humid environment.
- FITS Compatible with Chevy Gen III, Chevy LS series and other vehicles which engine with 4.8, 5.3, 6.0, 6.2 Litres, Please make sure that your header flange is 3/8.
- STRONGER The Gen III header bolts are rated at 170,000 psi, they're much stronger than original parts, and will last under even the most severe conditions. 100% rigorously tested before shipping.
- 12-MONTH WARRANTY If for any reason at all, you are not fully satisfied with the LS engine header bolts , simply contact us through amazon message at any time. We will provide comprehensive quality assurance for our product.
- See more on Amazon...
Brand: Misakomo | Manufacturer: Misakomo
Weight: 0.55 Pounds
See On Amazon
Looking For Something Else?
Search