Twotrees Double PEI Sheet 220x220mm/8.67x 8.67 inch Flexible Spring Steel Magnetic Build Plate Textured/Smooth Double Sided for Anet A8 Wanhao Duplicator i3 Monoprice Maker 3D Printers.
Asin: B09YM99HDX | Model: Twotrees220 | PartNumber: Twotrees220 | Ean: 0760606089822 | UPC: 760606089822
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【High Quality】: Made Of High Quality Stainless Steel And Strong Magnetic Base, Tear Off The Backing Paper And Stick It To The Bed, Stick The Magnetic Base To Your Build Plate, Then Put The Steel Plate On The Magnetic Plate. Please Remove The Protective Film On The Surface Before Printing. Flexible, Detachable, High Strength, Heat-Resistant, Four-Layer Design, Thicker And More Durable. Easily Handles Temperatures Up To 130°C. Great For Pla/Petg/Peek/Abs And Other Filaments..
【 Notice】: There Is A Transparent Protective Film On The Surface Of The Smooth Pei Sheet Spring Steel Build Plate, Which Needs To Be Torn Off Before Use. If There Are Bubbles On The Film, It Is Not A Quality Problem, Just Tear It Off, It Will Not Affect The Use.If You Have Any Questions About Product Quality And Suggestions, Please Feel Free To Contact Us And We Will Reply Within 24 Hours..
【Wide Application】: Three Sizes Are Available: 220Mm, 235Mm, 310Mm. Magnetic Pei Sheets Are Compatible With Ender 3 / Ender 3X / Ender 3 Pro / V2 / 3 Ender 3 Prox / Ender 5 / Ender 5 Pro, Cr-20, Cr-20 Pro, Etc..
【Easy To Use And Long Life】:No Glue, No Tape, Pei Printed Bed With Authentic 3M Has Strong Adhesion; No Scraping, Easy To Remove The Printed Matter From The Bed By Bending. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New. After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
Features
- Special Design : Excellent double-sided PEI magnetic build plate design. The smooth surface and matte texture can meet your needs at the same time. Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200 with no deformation.Higher cost performance and One multi-purpose.
- Easy to Use and Long life :No glue, No tape, PEI printed bed with authentic 3M has strong adhesion; No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new. After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- High Quality : Made of high quality stainless steel and strong magnetic base, tear off the backing paper and stick it to the bed, stick the magnetic base to your build plate, then put the steel plate on the magnetic plate. Please remove the protective film on the surface before printing. Flexible, detachable, high strength, heat-resistant, four-layer design, thicker and more durable. Easily handles temperatures up to 130 C. Great for PLA/PETG/PEEK/ABS and other filaments.
- Wide application : Three sizes are available: 220mm, 235mm, 310mm. Magnetic PEI sheets are compatible with Ender 3 / Ender 3X / Ender 3 Pro / V2 / 3 Ender 3 Prox / Ender 5 / Ender 5 Pro, CR-20, CR-20 Pro, etc.
- Notice : There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a quality problem, just tear it off, it will not affect the use.If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
See On Amazon Similar To Twotrees Double PEI Sheet 220x220mm
#1
IdeaFormer-3D Double Sided PEI Sheet 220x220mm, Flexible PEI Build Plate with Magnetic Plate for Artillery Genius for Anycubic Mega Pro/Mega S/Anet A6/A8/Wanhao Duplicator i3/Duplicator 6/Tronxy X2
Asin: B09C5P5CFN | Model: PEI-DBS | PartNumber: PEI-DBS
【Excellent Adhesion】It Can Achieve Good Adhesive When The Temperature Of The Heated Bed Is Around 60℃, Without Using Any Tools To Hel The Model Stick To The Plate. (Please Note The Max Temperature Is 260℃.).
【Compatible 3D Printers】The Size Of Ideaformer-3D Pei Build Plate Is 220X220mm. It's Suitable For Artillery Genius, Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao Duplicator I3, Voxelab Aquila, Maker Select Plus, Geetech A10, Tev Tornad, Anycubic Mega Pro, For Anycubic Mega S, Tronxy X2, Tronxy P802m, Cocoon 3D Printer, Ultimaker 1..
【Recommended Filaments Of Temperature】Pei Sheet Support Variety Filaments Such As Pla, Petg, Abs, Tpu, Asa, Pva, Pet, Pa, Pc Etc. For The Most Popular Filaments, We Suggested The Temperature As Follows: Pla/Tpu: 50-60℃; Petg: 70-80℃; Abs: 80-100℃..
【Double Sided Pei Coating Design】The Pei Surface Plate Is Frosted, Presenting The Frosted Sticker Surface A Distinctive Frosted Touch, Provides Greater Adherence To The Model And Prints Without Warping..
Features
- Package Included 1pcs x double sided textured PEI sheet; 1pcs x magnetic build plate.
- Double Sided PEI Coating Design The PEI surface plate is frosted, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
- Excellent Adhesion It can achieve good adhesive when the temperature of the heated bed is around 60 , without using any tools to hel the model stick to the plate. (PLEASE NOTE THE MAX TEMPERATURE IS 260 .)
- Recommended Filaments of Temperature PEI sheet support variety filaments such as PLA, PETG, ABS, TPU, ASA, PVA, PET, PA, PC etc. For the most popular filaments, we suggested the temperature as follows: PLA/TPU: 50-60 ; PETG: 70-80 ; ABS: 80-100 .
- Compatible 3D Printers The size of IdeaFormer-3D PEI build plate is 220x220mm. It's suitable for Artillery Genius, Anet A8 A6, Robo R2, Wanhao Duplicator6, Wanhao Duplicator i3, Voxelab Aquila, Maker Select Plus, Geetech A10, Tev Tornad, Anycubic Mega Pro, for Anycubic Mega S, Tronxy X2, Tronxy P802M, Cocoon 3D Printer, Ultimaker 1.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #2
Gizmo Dorks PEI Sheet 3D Printer Build Surface 300mm x 300mm (11.8" x 11.8") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVL1SYF | Model: GD-PEI3M-300MM | PartNumber: GD-PEI3M-300MM | Ean: 0887503182125 | UPC: 887503182125
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 300Mm X 300Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 300mm x 300mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 11.80 x 11.80 inches
See On Amazon #3
Gizmo Dorks PEI Sheet 3D Printer Build Surface 235mm x 235mm (9.3" x 9.3") with Preapplied Laminated 3M 468MP Adhesive for Creality Ender 3 or CR 20 | Made in The USA
Asin: B07GSJSDWR | Model: GD-PEI3M-235MM | PartNumber: GD-PEI3M-235MM | Ean: 0887503182606 | UPC: 887503182606
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 235 X 235Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches) / Fits The Creality Ender 3 Or Creality Cr 20 Perfectly!.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 235 x 235mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches) / Fits the Creality Ender 3 or Creality CR 20 perfectly!
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 9.25 x 9.25 inches | Weight: 0.13 pounds
See On Amazon #4
IdeaFormer-3D 3pcs Magnetic Build Surface (220 X 220mm) Flexible Removable Print Bed (2 pcs Print Surface + 1 pcs Base) for 3D Printer Hotbed(220x220), not Suitable for Ender 3 235mm Hotbed
Asin: B09B71PSJL | Model: HBD-MSK | PartNumber: HBD-MSK
Material: We Are Pc Material, Long-Term 80 Degrees. More Than 80℃ Of Magnetic Performance Will Weaken But Not Lose Magnetism, So Can Be Applied To Polylactic Acid And Other Filaments. Pc Material Flame Retardant, Wear-Resistant..
Please Do Not Allow The Heated Nozzle To Come Into Direct Contact With The A-Plate! For Ease Of Operation, The Desktop Is Heated To 50 Degrees C When The Model Is Taken, And Then The Model Is Taken..
Specification: Aab Three Sides In The Package, A Side Is Greater Than B Side (Actual Size Is B Side) Dimensions: 150X150/200X200/214X214/220X220/235X235/310X310mm..
Easy To Use: Can Be Installed On Hot Beds And Glass Platforms. Printing Is Not Warping. No Glue Is Required. Can Be Printed On A Cold Bed. The A-Plate Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model..
Features
- Features: The product includes three pieces of stickers(2pcs A plate and 1pcs B plate). It s surprising that our product is more 1pcs A plate than other brands. It can be reused and means that replacing the new A side is more time-saving. (The A plate is 5mm wider than the B plate)Kindly Tips:Our magnetic platform A and B must be used in pairs.
- Easy to use: Can be installed on hot beds and glass platforms. Printing is not warping. No glue is required. Can be printed on a cold bed. The A-plate is flexible and magnetic, making it easy to move off the platform and take away the printing model.
- Material: We are PC material, long-term 80 degrees. More than 80 of magnetic performance will weaken but not lose magnetism, so can be applied to polylactic acid and other filaments. PC material flame retardant, wear-resistant.
- Specification: AAB three sides in the package, A side is greater than B side (actual size is B side) dimensions: 150x150/200x200/214x214/220x220/235x235/310x310mm.
- Please do not allow the heated nozzle to come into direct contact with the A-plate! For ease of operation, the desktop is heated to 50 degrees C when the model is taken, and then the model is taken.
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
Dimensions: 0.00 x 0.01 x 0.01 inches | Weight: 0.91 pounds
See On Amazon #5
Double Sided Textured PEI Sheet,3D Printer Parts Printing Plate Frosted PEI Surface 220x220 mm for Anet A8 A6 Robo R2 Wanhao Duplicator6, Wanhao i3 3D Printer(Without Magnetic Bottom Sheet)
Asin: B09YY3VX9Y | Model: MY001 | PartNumber: MY001 | Ean: 0705548422542 | UPC: 705548422542
【High Temperature Resistance】:Genuine Pei Powder Coating Is Heat Resistant Which Temperature Resistance Can Be Up To 200℃ With No Deformation.
【Easy To Use】Pei Spring Steel Easy To Remove The Plastic Parts By Bending And Popping It Off When Cooling, Easy To Print, Easy To Maintain.
【Textured Surface】:The Textured Side Makes The Bottom Of The Prints Show A Matte Texture And Retain The Frosted Feeling.And Perfect For Pla/Abs/Tpu/Pefg/Nylon..
【Double-Sided】】:Pei Magnetic Flexible Bed Has Double-Sided Pei Coating, Both Sides Can Be Used..
Features
- Upgrade PEI Sheet :It is applicable with Lulzbot Taz 6 / Lulzbot Taz 5 / Tevo Tornado / Hictop Prusa i3 DIY / Anet A8 / Cocoon 3D Printer / Wanhao Duplicator i3 V1 / Plus and other same sized machines (Please measure your hot bed and make sure it is the right size for you
- Double-sided :PEI magnetic Flexible bed has double-sided PEI coating, both sides can be used.
- High Temperature Resistance :Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200 with no deformation
- Textured Surface :The textured side makes the bottom of the prints show a matte texture and retain the frosted feeling.And perfect for PLA/ABS/TPU/PEFG/Nylon.
- Easy to use PEI Spring steel Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain
- See more on Amazon...
Brand: MYOSOTIS | Manufacturer: China
See On Amazon #6
HzdaDeve 220X220MM Double-Sided Textured PEI PEO Bed Plate Build Surface Platform for Anets A8/A6, Wanhao Duplicator I3/Duplicator 6/Tronxy X2, Mega Pro/Mega S,Monoprices Maker, MK2/MK2A 3D Printer
Asin: B0CNCRVBT6
Compatible Printer: The Pei And Peo Sheet Is For Anets A8/A6, Wanhao Duplicator I3/Duplicator 6/Tronxy X2, Mega Pro/Mega S,Monoprices Maker, Mk2/Mk2a 3D Printer..
Easy For Removal: Peel Up The Top Part From The Heat Bed And Bend It To Take Off Models Easily As It’S Flexible..
Special Material: Made Of Polyethylene Which Is Inherently Flame Resistant And Low In Smoke Production, High Strength And Heat Resistance..
Excellent Flatness: It Provides The Most Flat Build Surface In The Market, Ensuring High Flatness For The Bottom Of Print, To Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform..
Excellent Adhesion With One Side Textured Spray Pei And One Side Smooth Surface Peo Spring Steel Plate, It Has Strong Adhesion To Adhere The Model In A Better Way. You Can Use Either Side..
Package Includes: 1 Kit 220X220 Mm Pei Peo Build Bed (Not Include Magnetic Base)..
Features
- Note: This 220x220mm build plate is not suitale for Ender 3 V3 SE printer. Please confirm your printer before placing the order.
- Package includes: 1 kit 220x220 mm PEI PEO build bed (Not include magnetic base).
- Compatible Printer: The PEI and PEO sheet is for Anets A8/A6, Wanhao Duplicator I3/Duplicator 6/Tronxy X2, Mega Pro/Mega S,Monoprices Maker, MK2/MK2A 3D Printer.
- Excellent adhesion with one side textured spray PEI and one side smooth surface PEO spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
- Special Material: made of Polyethylene which is inherently flame resistant and low in smoke production, high strength and heat resistance.
- Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
- Easy for removal: Peel up the top part from the heat bed and bend it to take off models easily as it s flexible.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve
See On Amazon #7
Gizmo Dorks PEI Sheet 3D Printer Build Surface 220mm x 220mm (8.6" x 8.6") with Laminated 3M 468MP Adhesive, Made in The USA
Asin: B07FVQJ7QK | Model: GD-PEI3M-220MM | PartNumber: GD-PEI3M-220MM | Ean: 0887503182132 | UPC: 887503182132
Build Surface - Pei Is The Perfect No Prep Build Surface Which Is Endlessly Reusable For Multiple Prints; Clean With Isopropypl Alcohol Between Prints (Or With Acetone On A Cold Bed).
Dimensions: 220 X 220Mm / Pei Thickness: 0.56Mm (0.022 Inches) / Laminated 3M 468Mp Adhesive Thickness: 0.13Mm (0.005 Inches).
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
Bubble Free Application - The 3M 468Mp Adhesive Is Already Preapplied To The Pei; Simply Peel Back The Tape Liner For Quick Adhesion To The Bed.
Features
- Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
- Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
- Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Dimensions: 220 x 220mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.03 x 8.60 x 8.60 Inches | Weight: 0.10 Pounds
See On Amazon #8
POJECITY Textured Steel Spring Metal PEI Sheet with Double Sided Flex Steel Bed 220 x 220mm
Asin: B09QYRZFKL | Model: MR1 | PartNumber: MR1 | Ean: 0746197528247 | UPC: 746197528247
When Printing Is Complete, Let The Plate Cool Down Enough (To Around 40C), Then Easily Remove The Prints. If The Print Is Still Stuck, Just Gently Bend The Steel Plate And Pop It Off! After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
Easy To Install: Made Of High Quality Stainless Steel And Strong Magnetic Base, Stick The Magnetic Base To Your Build Plate By Peeling Off The Backing Paper And Sticking It To Your Bed, Then Place The Steel Plate Onto The Magnetic Sheet. Keep The Side With Pei Facing Up To Print On. Please Peel Off The Protective Film On The Surface Before Printing..
The Size Of Pei Sheet Is 220*220Mm,Only 220*220Mm,Be Careful.
Double-Sided Pei: Pei Sheet Has Dual-Sided Pei Coating, Both Sides Can Be Used..
Features
- The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120 on the bed.I It is 220*220,not for 235 machine.It is not for Ender 3.
- Double-sided PEI: PEI Sheet has Dual-sided PEI coating, both sides can be used.
- When printing is complete, let the plate cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- The size of PEI Sheet is 220*220mm,Only 220*220mm,be careful
- Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- See more on Amazon...
Brand: POJECITY | Manufacturer: tongtuo003
Dimensions: 0.01 x 8.66 x 8.66 inches
See On Amazon #9
RETUXEP Smooth PEO+Textured PEI Spring Steel Build Plate 220x220mm (with Magnetic Base) for Artillery Genius/Pro/MK2/MK2A/Anet A8/Anet A6, PEO PEI Spring Steel Flexible Build Plate PEI Sheet
Asin: B0CKSWPYH7
【High Temperature Resistant】The Pei Bed Can Be Resistant To 260°C For The Nozzle Without Deformation. The Peo Surface Can Work At A High Temperature Of 120°C.
【Flexible And Easy To Remove】The Pei+Peo Spring Steel Sheet Is Flexible. Prints Can Be Easily Removed By Hand Once The Build Surface Has Cooled, Or Bend The Build Plate And Remove The Prints. The Print Mat Won’T Be Out Of Shape..
【Upgraded Double Sided Printing】Double-Sided Peo+Pei Spring Steel Plate , One Side Is Smooth Diamond Type Print Surface--Upgraded Peo Film. The Other Side Is Pei Frosted Surface, Presenting The Frosted Sticker Surface A Distinctive Frosted Touch, Provides Greater Adherence To The Model And Prints Without Warping..
【Package Included】 Pei Peo Sheet (With Adhesive Magnetic Sticker), The Build Plate Size Is 220X220mm..
Features
- Compatible Printer 220x220mm PEI surface +PEO surface spring steel sheet , compatible with Artillery Genius/Pro/MK2/MK2A/Anet A8/Anet A6.
- Package Included PEI PEO sheet (with adhesive magnetic sticker), the build plate size is 220x220mm.
- High Temperature Resistant The PEI bed can be resistant to 260 C for the nozzle without deformation. The PEO surface can work at a high temperature of 120 C
- Upgraded Double Sided Printing Double-sided PEO+PEI spring steel plate , one side is smooth diamond type print surface--upgraded PEO film. The other side is PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
- Flexible and Easy to Remove The PEI+PEO spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or bend the build plate and remove the prints. The print mat won t be out of shape.
- See more on Amazon...
Brand: RETUXEP | Manufacturer: AIYANQI
See On Amazon #10
Comgrow PEI Double Sided Magnetic Heated Bed, PEI Spring Steel 235x235mm, Smooth and Textured PEI Sheet for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo
Asin: B09TVGDJYP
Wide Compatibility - If The Magnetic Sticker Is Stuck To The Bed, It Won't Be Easy To Remove. Therefore, Please Make Sure That Measure It Correctly First Before Removing The Adhesive And Stick To The 3D Printer Heated Bed. Suitable For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High-Quality Material - When The Pei Bed Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy Mode Lremoval - Easy To Adhere To The Printing Surface, The Ender 3 Pro Pei Bed Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off. The Flexible Surface Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models..
Wear Resistance - The Golden Yellow Matte Surface Of Pei Has Strong High-Temperature Stability And High Printing Stability. Our Pei Spring Steel 235X235mm Flame Retardant Has High-Temperature Resistance, High Strength, Wear Resistance, And Electrical Insulation Properties..
Features
- EXCELLENT FLATNESS - The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use).
- WEAR RESISTANCE - The golden yellow matte surface of PEI has strong high-temperature stability and high printing stability. Our PEI spring steel 235x235mm flame retardant has high-temperature resistance, high strength, wear resistance, and electrical insulation properties.
- WIDE COMPATIBILITY - If the magnetic sticker is stuck to the bed, it won't be easy to remove. Therefore, please make sure that measure it correctly first before removing the adhesive and stick to the 3d printer heated bed. Suitable for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- EASY MODE LREMOVAL - Easy to adhere to the printing surface, the ender 3 Pro PEI bed is easy to remove the prints and flex slightly to pop your print right off. The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.
- HIGH-QUALITY MATERIAL - When the pei bed is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #11
Double Side Textured PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3(NEO)/Ender 3 Pro/Ender 3 V2(NEO) /Ender 3 S1(Pro) /Ender 5 S1 /Ender 5 (pro) 3D Printer Bed
Asin: B0C3WNM9CD | Model: PEI-235 | PartNumber: PEI-235 | Ean: 0741365796176 | UPC: 741365796176
✅【Wide Application】Compatible With Printing Area Below 235Mm Size Printers As Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 Pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ Cr-20/ Cr-20 Pro/ Elegoo Neptune3 (Pro)/ Anycubic Kobra.,Etc.
✅【More Practical】We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. More Durable To Handle The Tough Conditions Of 24/7 Printing. Wear-Resistant And Scratch-Resistant, Easy To Clean,Also Anti-Scratch And Dustproof.
✅【100% Satisfaction Commitment】We Stand Behind The Quality Of Our Products. If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us. We Provide 90-Day Money Back And 1 Year Warranty. 100% Satisfaction Guarantee For Risk-Free Shopping!.
✅【Enhance Printing Effect】Textured Pei Coating Would Make The Bottom Of Your Prints Show A Matte Texture And Retain The Frosted Feeling.Helps To Stick On The Bed More Firmly.Works For Most Fdm Materials In The Market, Like Pla, Pla+, Petg, Abs, Tpu, Asa, Nylon.
✅【Excellent Adhesion】Pei Coating Textured Surface On Both Side.Which Performs Excellent In Print Adhesion.Surface Temp Resistant Up To 120℃,Which Could Meet 99% Filament Material Needs..
Features
- EASY REMOVAL Contains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints.
- EXCELLENT ADHESION PEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120 ,which could meet 99% filament material needs.
- WIDE APPLICATION Compatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ CR-20/ CR-20 Pro/ ELEGOO Neptune3 (Pro)/ Anycubic Kobra.,etc
- ENHANCE PRINTING EFFECT Textured PEI coating would make the bottom of your prints show a matte texture and retain the frosted feeling.helps to stick on the bed more firmly.works for most FDM materials in the market, like PLA, PLA+, PETG, ABS, TPU, ASA, Nylon
- MORE PRACTICAL We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. more durable to handle the tough conditions of 24/7 printing. Wear-Resistant and Scratch-Resistant, easy to clean,also anti-scratch and dustproof
- 100% SATISFACTION COMMITMENT We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 90-day money back and 1 YEAR warranty. 100% Satisfaction Guarantee for risk-free shopping!
- See more on Amazon...
First Available: 08/08/2023
Brand: FugaCity | Manufacturer: Fugacity LLC
Dimensions: 0.39 x 9.25 x 9.25 Inches | Weight: 1.01 pounds
Warranty: 180D Warranty & Free Return from date purchased
See On Amazon #12
Befenybay Hot Professional Flexible Removable Magnetic Build Surface 220x220mm (A+B) for 3D Printer Heated Bed (220x220mm)
Asin: B07RQDZHQH | Model: BE015 | PartNumber: BE015 | Ean: 0824007228096 | UPC: 824007228096
Easy Clean: It Is Capable To Work At 70ºc.Can Be Used Repeatedly,Resistance, Strong Magnetic,Easy Clean With Alcohol.
Widely Used For Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds.
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower Adhesive Surface On Top Of Normal Build Plate.
More Flat For Precision: Super Flatness. Fast And Uniform Heating. More Precise On Printing, Especially The Bottom Of The Prints.
Features
- SIZE: 220mm x 220mm, thickness 1.7MM/0.07 inch
- More Flat for Precision: Super Flatness. Fast and uniform heating. More precise on printing, especially the bottom of the prints
- Easy clean: It is capable to work at 70 C.Can be used repeatedly,resistance, Strong magnetic,Easy clean with alcohol
- Simple Installation: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate
- Widely used for FDM printer models, and all heated and non-heated 3D printer beds
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
Weight: 0.49 pounds
See On Amazon #13
HICTOP 250 * 250mm Double Sided Textured Pei and Magnetic Build Plate PEI Bed with Adhesive for AnkerMake M5 3D Printers
Asin: B0BXWKBQRD | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 250*250Mm（9.84*9.84Inch）, It Is Applicable With Ankermake M5 3D Printers With A 250*250Mm Hotbed, Please Measure Yours Before Placing The Order..
4 Prints Come Off 250*250Mm Pei Sheet Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Ankermake M5 Pei Bed Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Features
- 1 The HICTOP double sided pei is combined with 2 parts, a flexible steel platform coated with textured PEI surface on both sides and a magnetic bottom sheet with adhesive on the back.
- 2 The AnkerMake M5 PEI bed is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off 250*250mm pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 250*250mm 9.84*9.84inch , it is applicable with AnkerMake M5 3D printers with a 250*250mm hotbed, please measure yours before placing the order.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #14
IdeaFormer 220x220mm Double Sided Printing Texured PEI Surface Sheet Flexible Spring Steel Build Plate Heated Bed for Anet A8/Wanhao Duplicator i3/Monoprice Maker (with Magnetic Base)
Asin: B0BY1N1DSY
【Compatible Filaments】Almost All Filaments Of Pei Are Compatible, Work Well With Pla/Abs/Petg/Tpu/Nylon And Many Other Filaments, Petg Can Print Well, But The Bed Temperature Needs To Be At 80 Around -85°C, The Highest Temperature Can Reach 120°C..
【Quality Service】If You Have Any Questions About The Product Or Need Technical Support, Please Leave Us A Message And We Will Reply Within 24 Hours..
【Compatible Filaments】Almost All Filaments Of Pei Are Compatible, Work Well With Pla/Abs/Petg/Tpu/Nylon And Many Other Filaments, Petg Can Print Well, But The Bed Temperature Needs To Be At 80 Around -85°C, The Highest Temperature Can Reach 120°C..
【High Durability】The Pei Heated Bed Can Withstand The Countless Thermal Cycles That The 3D Printing Bed Goes Through From Print To Print. The Magnetic Sticker Can Withstand The High Temperature Of 80°C, And The Pei Coating Can Withstand The High Temperature Of 260°C..
Features
- Double-sided textured PEI+Magnetic printing base plate Made of high-quality spring steel and powder-coated PEI, double-sided PEI coating, both front and back can be printed; PEI surface increases hardness, the coating is not easy to fall off and does not produce air bubbles; print when using Works well and removes the model easily by bending or popping.
- High Durability The PEI heated bed can withstand the countless thermal cycles that the 3D printing bed goes through from print to print. The magnetic sticker can withstand the high temperature of 80 C, and the PEI coating can withstand the high temperature of 260 C.
- Compatible Filaments Almost all filaments of PEI are compatible, work well with PLA/ABS/PETG/TPU/Nylon and many other filaments, PETG can print well, but the bed temperature needs to be at 80 Around -85 C, the highest temperature can reach 120 C.
- Compatible Filaments Almost all filaments of PEI are compatible, work well with PLA/ABS/PETG/TPU/Nylon and many other filaments, PETG can print well, but the bed temperature needs to be at 80 Around -85 C, the highest temperature can reach 120 C.
- Quality Service If you have any questions about the product or need technical support, please leave us a message and we will reply within 24 hours.
- See more on Amazon...
Brand: IdeaFormer IR3 | Manufacturer: Bell Tech
See On Amazon #15
FYSETC 3D Printing Buildplate Steel Spring Sheet Bed 220x220mm/ 8.6x8.6 inch Preapplied PEI with Soft Mounting Base for Ant A8 Wanhao Duplicator i3 Monprice Make-r Geeeteh i3
Asin: B082WTTD1D
Specially-Coated Flexplates Are Resistant To Rust And Work On Both Heated And Non-Heated Print Beds. The Flexplate Is Engineered To Maintain Shape Over Time..
Kindly Tips: We Have Helped You Stick Pei On The Steel Plate, Use Machine, So You Don't Need To Worry About Bubbles. If You Received Package But Found The Air Bubbles Or Scratches, Please Don't Worry, They Are The Surface Layer, Pei Will Not Be Affected..
Before Using, Please Remove The Protect Film Which Stick On The Pei Surface, Attach To Your Print Bed Via The Soft Mounting Base, Perform A One-Time Z-Height Adjustment, And Begin Printing. (After Installing, How To Auto-Leveler: Turn The Metal Part Upside Down So The Uncoatd Metal Is Facing Up. Apprently The Auto-Leveler Uses Electric Current To Do It's Thing. The Pei Side Is Not So Good.) When Printing Is Complete, Simply Remove The Flexplate, Flex, And Pop Your Prints Off!.
Complete Flexplate Build Surface System: Include A Flexplate Sticking With Pei Sheet, A Magletic Mounting Base.(If Just Need The Steel Plate With Pei, Please Search Asin:B08s2zbbzy).
Features
- Upgrade 3d printer bed mat 220x220 Replacement Spring Steel Sheet with Magletic Sticker for Wanhao Monprice 220 hotbed: Cut corner to fit well, flexible, removable.
- Complete FlexPlate build surface System: Include a FlexPlate sticking with pei sheet, a magletic mounting base.(If just need the steel plate with PEI, please search ASIN:B08S2ZBBZY)
- Specially-coated FlexPlates are resistant to rust and work on both heated and non-heated print beds. The FlexPlate is engineered to maintain shape over time.
- Before using, please remove the protect film which stick on the PEI surface, attach to your print bed via the Soft Mounting Base, perform a one-time z-height adjustment, and begin printing. (After installing, how to auto-leveler: turn the metal part upside down so the uncoatd metal is facing up. Apprently the auto-leveler uses electric current to do it's thing. The PEI side is not so good.) When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
- Kindly Tips: We have helped you stick PEI on the steel plate, use machine, so you don't need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don't worry, they are the surface layer, PEI will not be affected.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #16
Twotrees PEI Sheet Double Side Textured Smooth 310x310mm PEI Bed for CR10 CR10 S Smart Mega X Sidewinder X1 X2 S8 Pro S8 Plus KP5L SP-5 X40V2 Tornado Flexible Magnetic Spring Steel Print Bed Plate
Asin: B09Y1X3HLH | Model: 200204028-CA | PartNumber: 200204028-CA | Ean: 0772985318608 | UPC: 772985318608
【Easy To Use】For Most Filaments, No Need For Stick Glue, Tape Or Other Adhesive. Good Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is Around 60°C. When The Pei Building Surface Has Cooled, The Print Can Be Easily Removed By Hand By Simply Bending The Spring Steel Pei Slightly. The Maximum Printing Temperature Of Pei Is 120°C, It Is Compatible With Most Of Filament, Such As: Pla/ Asa/ Pla+/ Abs Etc..
【Outstanding Service】If There Is A Issues With The Product You Received, Send Us A Message And We Will Help You Out. If The Product Is Damaged During Use, We Will Replace It With A New One For You. Thanks..
【Compatibility】The Size Of Pei Sheet Is 310*310Mm, Not Warped. It Is Compatible With Most Printers On The Market With A Build Size Of 300*300Mm. It Is Suitable For Cr10/Cr10s, X40 Idex/X40 V2, Kp5l, S8 Pro/Plus, Sidewinder X1 X2, Tl-D3 Pro, Twotrees Sp-5, Blu-5/ Bluer Plus And Other 3D Printers. If Your 3D Printer Has A 310X310mm Heat Bed Platform, This Pei Sheet Is Compatible With Your 3D Printer..
【Easy To Install】Stick The Soft Magnetic Base To The Heating Bed Of Your 3D Printer, Then Put The Stacked Pei Steel Foil Platform On Top And You Are Ready To Use. The Pei Surface Sticks To The Magnet Almost Too Well, It Makes It So Easy To Switch Between Smooth Bottom Surfaces And Textured Bottom Surfaces..
Features
- Kit Includes 1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
- Easy to install Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- Easy to use For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60 C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120 C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
- Compatibility The size of PEI sheet is 310*310mm, not warped. It is compatible with most printers on the market with a build size of 300*300mm. It is suitable for CR10/CR10S, X40 IDEX/X40 V2, KP5L, S8 Pro/Plus, Sidewinder X1 X2, TL-D3 Pro, Twotrees SP-5, BLU-5/ Bluer Plus and other 3D printers. If your 3D printer has a 310x310mm heat bed platform, This PEI sheet is compatible with your 3D printer.
- Outstanding service If there is a issues with the product you received, send us a message and we will help you out. If the product is damaged during use, we will replace it with a new one for you. Thanks.
- See more on Amazon...
Brand: OUYZGIA | Manufacturer: OUYZGIA
See On Amazon #17
Befenybay Flexible Removable Single-Sided Spraying PEI Metal Sheet Bed Magnetic Heated Bed Build Surface 220x220mm for 3D Printer (220x220mm)
Asin: B08NT76B75 | Model: BE101 | PartNumber: BE101 | Ean: 0191170847103 | UPC: 191170847103
【Easy To Adhere And Remove】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Offrepeatedly,Resistance.
【Reuse For Multiple Prints】Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
【Aplication】Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry.
【Flexible And Removable】Flexible, Removable, Can Stick To Magnetics Very Well. High Strength And Heat Resistance.
Features
- Size 220mm x 220mm,the overall thickness 2MM/0.08 inch
- Flexible and Removable Flexible, removable, can stick to magnetics very well. High strength and heat resistance
- Easy to Adhere and Remove Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right offrepeatedly,resistance
- Aplication ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
- Reuse for multiple prints Just wipe down with isopropyl alcohol between prints for best results
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon #18
Gizmo Dorks PEI Sheet 10" x 10" (254mm x 254mm) 1mm Thick 3D Printer Build Surface Ultem 1000, Made in The USA
Asin: B074XLCSX7 | Model: GD-POLYPEI-10x10 | PartNumber: GD-POLYPEI-10x10 | Ean: 0887503180701 | UPC: 887503180701
Remove Film From Both Sides Before Using: Blue Protective Film Guards Against Scratches During Shipping And Handling..
Sheet Can Be Easily Cut Down To Desired Size By Scoring With A Utility Knife.
Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results.
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
Features
- MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
- REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
- Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
- Sheet can be easily cut down to desired size by scoring with a utility knife
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.04 x 10.00 x 10.00 Inches | Weight: 0.19 pounds
See On Amazon #19
Gizmo Dorks PEI Sheet 4.7" x 4.7" (120mm x 120mm) 1mm Thick Build Surface for 3D Printer, Made in The USA
Asin: B077YBN62J | Model: GD-POLYPEI-4.7x4.7 | PartNumber: GD-POLYPEI-4.7x4.7 | Ean: 0887503181180 | UPC: 887503181180
Remove Film From Both Sides Before Using: Blue Protective Film Guards Against Scratches During Shipping And Handling..
Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results; Sheet Can Be Asily Cut Down To Desired Size By Scoring With A Utility Knife..
Abs And Pla Filaments (Along With Many Other Materials) Print Directly On To Pei Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
Features
- Single 1mm thick sheet, Ultem 1000 grade, installs quickly on top of existing flat build platforms (e.g. borosilicate glass).
- ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
- REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
- Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results; Sheet can be asily cut down to desired size by scoring with a utility knife.
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 0.04 x 4.70 x 4.70 inches | Weight: 0.05 Pounds
See On Amazon
Looking For Something Else?
Search