DC Current Switch,Current Sensing Relay DC Current Sensing Switch 0-50A Amp Sensor Monitoring Relay D360
Asin: B09YN9Q9YP | Model: Lelukee22050402 | PartNumber: Lelukee22050402 | Ean: 0795932814657 | UPC: 795932814657
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Indicator Light: The Indicator Light Is Off When There Is No Current, The Green Light Is On When The Current Is Lower Than The Threshold, And The Red Light Is On When The Current Is Higher Than The Threshold.
Detection Range: 0-50A, 6A@240V Ac/Dc Contact Capacity.
D366 Support Delay Adjustment: Power-Off Delay Can Be Set From 0 To 99 Seconds, Clockwise To Increase And Counter-Clockwise To Decrease.
Set Threshold: Set The Threshold When The Perforation Current Exceeds The Threshold, The Relay Will Work, And When The Perforation Current Is Lower Than The Threshold, The Relay Will Reset.
Features
- Basic Function:When the piercing current exceeds the set value, the output switch will act Automatically reset when the piercing current is less than the set value.
- Set threshold: set the threshold when the perforation current exceeds the threshold, the relay will work, and when the perforation current is lower than the threshold, the relay will reset
- Indicator light: the indicator light is off when there is no current, the green light is on when the current is lower than the threshold, and the red light is on when the current is higher than the threshold
- D366 support Delay adjustment: power-off delay can be set from 0 to 99 seconds, clockwise to increase and counter-clockwise to decrease
- Detection range: 0-50A, 6A@240V AC/DC contact capacity
- See more on Amazon...
Brand: Lelukee | Manufacturer: Lelukee
Dimensions: 1.97 x 2.76 x 1.18 inches
See On Amazon Similar To DC Current SwitchCurrent Sensing Relay
#1
UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Asin: B07BT25J52 | Model: U6031 | PartNumber: U6031
Self Protection: Built With Protection Against Reversal Diode, Supports Anti-Reverse Protection. Note: Please Remove The Jumper Cap Of S5 When Controlling Ac Current Or Dc Current Voltages Other Than 12V, Otherwise The Module Will Be Burned Or Will Not Work Properly..
Applications: This Module Works As A Switch With Time Delay On And Off Function, Highly Recommended For Automotive Circuit Modification, And Led Lights, Dc Motors, Pump And Smart Home Control System..
Functions: Supports On Delay And Off Delay Modes, The Delay Time Can Be Adjusted From 0.1S To 1H, The Delay Mode And Delay Time Can Be Set By Shorting Or Opening The Jumper Pins And Rotating The Potentiometer..
Features
- Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
- Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
- Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
- Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.04 pounds
See On Amazon #2
AC100V-250V 30A High Power 2-Channel Relay High Current DC5V High-Low Level Trigger Switch Module for Arduino
Asin: B077W1NVLM | Model: Walfrontbg8atmgd7x | PartNumber: Walfrontbg8atmgd7x | Ean: 0663862470437 | UPC: 663862470437
Easy To Use, Designed With Screw Terminals For Convenient Connection.
Four Mounting Holes Are Great For Installation.
High Or Low Level Trigger Can Be Selected By Jumper.
Large Load Capacity, The Relay Can Connect To Maximum 30A, 250V Loads.
Features
- This is a high-low level trigger 2-channel relay module that can control two loads
- Large load capacity, the relay can connect to maximum 30A, 250V loads
- Easy to use, designed with screw terminals for convenient connection
- High or low level trigger can be selected by jumper
- Four mounting holes are great for installation
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.22 pounds
See On Amazon #3
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
DROK Delay Relay Module, DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with LCD Display Switch Button Case
Asin: B07VLXR7Z1
Independent Parameter --- Able To Set Different Op, Cl, Lop Parameters Which Are Independent And Saved Separately; Support Viewing Currently Set Parameters Without Affecting System Operation..
Note --- No Trigger Cable Or Connector Included, Need To Be Purchased Separately..
Other Features --- Clear Lcd Display; Support Uart Data Uploading And Parameter Setting; With Pause Button, Support One-Button Pause; With Automatically Sleep Mode; With Input Reverse Connection Protection; With Power-Off Auto Storage Function..
Trigger --- Support High Level Support, Low Level Trigger, Button Trigger Control, Switching Value Control, Available For Most Applications..
Features
- SPECIFICATION --- working voltage DC 6-30V; timing range 0.01s-9999mins continuously adjustable.
- TRIGGER --- support high level support, low level trigger, button trigger control, switching value control, available for most applications.
- INDEPENDENT PARAMETER --- able to set different OP, CL, LOP parameters which are independent and saved separately; support viewing currently set parameters without affecting system operation.
- OTHER FEATURES --- clear LCD display; support UART data uploading and parameter setting; with pause button, support one-button pause; with automatically sleep mode; with input reverse connection protection; with power-off auto storage function.
- NOTE --- no trigger cable or connector included, need to be purchased separately.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #6
CrocSee Miniature Current Switch, CS-TS0, Normally Open Amp Sensor Monitoring Relay, AC 1-50A Detectable
Asin: B086YT49H7 | Model: 4A420 | PartNumber: 4A420 | Ean: 0689749968811 | UPC: 689749968811
Accurate & Dependable: Offers A Sensing Range Of 1 To 50 Amps And Universal, Solid-State Outputs; Accuracy: 1%.
Note: If You Want To Test The Operation Of The Sensor Switch, A Load Must Be Applied Across The No Contacts; Otherwise, It Will Not Work..
Faster Response Time: Once Current Flow Is Detected, It Closes A Set Of Contacts Immidiately; Response Time: ≤200Ms.
Self-Powered, No External Power Supply Required.
Features
- N.O. Universal Outputs: 2.5A @ 120 VAC/240VAC; In 240V circuit, only one 120V hot line is connected.
- Self-powered, no external power supply required
- Accurate & Dependable: Offers a sensing range of 1 to 50 amps and universal, solid-state outputs; Accuracy: 1%
- Faster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms
- NOTE: If you want to test the operation of the sensor switch, a load must be applied across the NO contacts; otherwise, it will not work.
- See more on Amazon...
Brand: CrocSee | Manufacturer: CrocSee
See On Amazon #7
DROK Timer Relay, Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply
Asin: B07DFT2WDS | Model: 200350 | PartNumber: 200350
Lcd Display: The Time Delay Relay Module Is Designed With Lcd Display, Can Clearly And Directly Show The Current Mode And Parameters.
Auto Save: All Setting Parameters Are Automatically Saved By Power-Fail.
Features
- Independent Parameters: OP/CL/LOP parameters can be modified and saved, and they are individual
- Auto Save: All setting parameters are automatically saved by power-fail
- LCD Display: the time delay relay module is designed with LCD display, can clearly and directly show the current mode and parameters
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #8
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #9
DROK 12 Volt Timer Relay, 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display
Asin: B071XNY72Q | Model: 300473 | PartNumber: 300473
Features
- 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #10
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage
Asin: B089Q6KLPQ | Model: F-1022 Series | PartNumber: F-1022 Series | Ean: 6954525591007
Compact Plastic Case And Wires Connects For Easy Mount. Led Indication For Relay Action..
This Is A Simple And Practical Passive Relay Module, Which Is Very Convenient To Use. It Can Support Both Normally Open And Normally Close. Two Screw Mounting Holes Are Convenient For You To Fix It On The Wall Or Wooden Board. Of Course, You Can Also Choose Not To Lock The Screw..
Output Switch Dpst 1No 1Nc(Double Pole Single Throw, 1X Normally Open And 1X Normally Close ), Rated Current 8A/250Vac Or 8A/30Vdc (One Switch)..
Features
- Input control signal: Voltage AC or DC 12V, Current 33mA.
- Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch).
- Compact plastic case and wires connects for easy mount. LED indication for relay action.
- This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #11
Yeeco 30A High Current 12V Contactor Relay Switch Power Switch DC Power Switching Control Board Control Module Electrical Relay Switches for Cooler Heater Refit Water Heater Control
Asin: B00MKWACVI | Model: 1300199 | PartNumber: 1300199 | Ean: 0701203237612 | UPC: 701203237612
30A High Current 12V Contactor Relay Switch Dc Power Switching Control Board.
It Can Be Used To Cooler Control ,Heater Control ,Refit Water Heater Control.
30A Single Channel Relay Of 4 Terminal Shunt.
Control Voltage: 250V Max.
Features
- Input: 12V DC (relay powered)
- Control voltage: 250V Max
- 30A High Current 12V Contactor relay Switch DC power Switching Control Board
- 30A single channel relay of 4 terminal shunt
- It can be used to cooler control ,heater control ,refit water heater control
- See more on Amazon...
Brand: Yeeco | Manufacturer: Yeeco
Dimensions: 0.70 x 7.00 x 5.00 inches | Weight: 0.02 pounds
See On Amazon #12
HiLetgo 2pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level Trigger
Asin: B00LW2H5GC | Model: 3-01-0375 | PartNumber: 3-01-0375 | Ean: 0702082656204 | UPC: 702082656204
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
Timer Delay Relay DC 5V 12V 24V On Off Timer Module Trigger Cycle Dual MOS Delay Control Board with Digital Tube Display and Protective Shell for Smart Home, Automatic Control
Asin: B07T3KCQZB | Ean: 0608651949381 | UPC: 608651949381
★One Key Emergency Stop Function：The Module With One Key Emergency Stop Function (Stop Key), With Reverse Connection Protection, Reverse Connection Will Not Burn. And It Supports Sleep Mode. After Enabling, The Display Will Automatically Turn Off If Without Any Operation Within 5 Minutes. Press Any Button To Wake Up.
★Dual Mos Output: This Mos Tube Pulse Generator Uses Dual Mos Parallel Active Output, Lower Internal Resistance, Higher Current, And Strong Power. 15A, 400W At Normal Temperature. For More Details, Please Read The User Manual.
★Unlimited Switching Times：This Time Delay Switch Circuit Can Realize The Circuit High Frequency Fast And Frequent On And Off, Unlimited Switching Times. No Noise Will Be Generated During The On-Off Process, No Electric Sparks, And No Electromagnetic Interference. The Service Life Is Longer Than That Of Common Electromagnetic Relays.
Different Parameters Can Be Set: Op、Cl、Lop These Parameters Can Be Set. Op-On Time, Cl-Off Time, Lop-Number Of Cycles (1—999 Times, "---" Means Infinite Cycles). These Parameters Are Independent Of Each Other And Saved Separately. All Set Parameters Are Automatically Saved After Power-Off.
Features
- Wide working voltage The trigger cycle timer delay controller module work voltage is DC 5V-36V. Meet the use of most equipment. Control Current is 30A(Max and need a heat sink! Normal temperature 15A 400W). Trigger signal source: High-level trigger (3.0V~24V)
- Different parameters can be set: OP CL LOP these parameters can be set. OP-on time, CL-off time, LOP-number of cycles (1 999 times, --- means infinite cycles). These parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off
- One key emergency stop function The module with One key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. And it supports sleep mode. After enabling, the display will automatically turn off if without any operation within 5 minutes. Press any button to wake up
- Unlimited switching times This time delay switch circuit can realize the circuit high frequency fast and frequent on and off, unlimited switching times. No noise will be generated during the on-off process, no electric sparks, and no electromagnetic interference. The service life is longer than that of common electromagnetic relays
- Dual MOS output: This MOS tube pulse generator uses dual MOS parallel active output, lower internal resistance, higher current, and strong power. 15A, 400W at normal temperature. For more details, please read the user manual
- See more on Amazon...
Brand: PEMENOL
Dimensions: 1.54 x 2.36 x 0.55 Inches
See On Amazon #14
HiLetgo 2pcs DC 5V Trigger Time Delay Switch Relay Module Adjustable Time Delay Control Swtich Trigger Delay Conduction Relay Switch Module Wide Voltage Delay Relay DC 5V-30V Micro USB Power
Asin: B0832MW9L4
Adjusting The Potentiometer Can Set The Length Of Time..
Anti-Interference Ability, The Relay At Various Interference Will Not Misoperation, Suitable For Industrial Control..
Microusb 5.0V Power Supply With An Input Port, Easy To Use, 5 ~ 30V Wide Supply Voltage..
Features
- Trigger Time Delay Switch Relay Module Adjustable Time Delay Control Swtich
- MicroUSB 5.0V power supply with an input port, easy to use, 5 ~ 30V wide supply voltage.
- Adjusting the potentiometer can set the length of time.
- Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #15
Jadeshay AC Current Sensing Switch, SZC23-NO-AL-CH Adjustable 0.2-30A Normally Open Self-Powered Current Sensing Switch
Asin: B07Q2KDTHJ | Model: SZC23-NO-AL-CH | PartNumber: SZC23-NO-AL-CH | Ean: 0728614452915 | UPC: 728614452915
Intuitive Led Indicator: Integrated Led Indicator Provides A Convenient And Visual Display Of The Switch's Working Status, Allowing Users To Easily Monitor And Troubleshoot Any Issues..
Robust Design And Versatility: With Its Straight-Through Structure Design And Isolation Withstand Voltage Of Up To 2000V, Szc23 Current Sensing Switch Can Withstand Demanding Industrial Environments. It Is Suitable For A Wide Range Of Applications, Including Ac Current Measurement And Monitoring, Ac Motor Overload Protection, And Electronic Switch Control Systems..
High-Performance Switching: Equipped With A High-Power Mos Tube Electronic Switch, Szc23 Current Sensing Switch Ensures Efficient And Contactless Switching Operations. It Can Handle Numerous Opening And Closing Cycles Without Any Performance Degradation And Boasts A Rapid Reaction Speed In The Millisecond Range..
Self-Powered And Reliable: Unlike Other Current Sensing Switches On The Market, Current Sensing Switch Does Not Require An External Power Supply. This Ensures Reliable Operation Without The Need For Additional Wiring Or Power Sources..
Features
- Accurate and Adjustable Sensing: SZC23 series AC current sensing switch allows for easy and precise monitoring of AC currents ranging from 0.2A to 30A. With a built-in potentiometer, users can easily set the desired action current.
- Self-Powered and Reliable: Unlike other current sensing switches on the market, current sensing switch does not require an external power supply. This ensures reliable operation without the need for additional wiring or power sources.
- Intuitive LED Indicator: Integrated LED indicator provides a convenient and visual display of the switch's working status, allowing users to easily monitor and troubleshoot any issues.
- High-Performance Switching: Equipped with a high-power MOS tube electronic switch, SZC23 current sensing switch ensures efficient and contactless switching operations. It can handle numerous opening and closing cycles without any performance degradation and boasts a rapid reaction speed in the millisecond range.
- Robust Design and Versatility: With its straight-through structure design and isolation withstand voltage of up to 2000V, SZC23 current sensing switch can withstand demanding industrial environments. It is suitable for a wide range of applications, including AC current measurement and monitoring, AC motor overload protection, and electronic switch control systems.
- See more on Amazon...
Brand: Jadeshay | Manufacturer: jadeshay
Dimensions: 1.18 x 2.76 x 2.17 inches | Weight: 0.12 pounds
See On Amazon #16
HiLetgo 5V 1 Channel Self Locking Bistable One Button Start/Stop Self-Locking Relay Module Relay Switch for MCU Control
Asin: B00LW2VLS0 | Model: 3-01-0378 | PartNumber: 3-01-0378 | Ean: 0702082656235 | UPC: 702082656235
With Anti-Power Reverse Diode Protection, A Short Time Reverse Power Supply Without Any Damage To The Product;.
Triggering Can Also Be An External Trigger Switch, The Product Is Equipped With A Good Seat And Lead Wire, More Convenient To Use..
The Use Of Genuine Songle Relay Control Load, 250V 10A (Ac) And 30V 10A (Dc) Under The Load Can Withstand;.
With High-Power Regulator To Provide Adequate And Stable Voltage, And Have Enough Cooling Holes To Ensure Long-Term Stable And Reliable Products Work;.
Features
- Using double-panel design PCB; MCU control, stable and reliable performance, strong anti-interference, will not trigger by mistake, superior performance than CD4013;
- With high-power regulator to provide adequate and stable voltage, and have enough cooling holes to ensure long-term stable and reliable products work;
- With anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
- The use of genuine Songle relay control load, 250V 10A (AC) and 30V 10A (DC) under the load can withstand;
- Triggering can also be an external trigger switch, the product is equipped with a good seat and lead wire, more convenient to use.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
UCTRONICS DC 12V Programmable Multifunction Time Delay Relay Module with Segment LEDs Display for Smart Home, Automatic Control
Asin: B07BT32T1M | Model: U6030 | PartNumber: U6030
Auto Power Saving Function, User Could Set Up On Their Own.
Paper Instructions.
All Options Setting Could Be Saved Automatically, The Content Will Not Be Lost Even Power Down.
Reverse Protection, Avoid Burning Down The Module As Connecting The Wrong Terminals.
Features
- Programmable 18 delay modes, to meet the switch control of all kinds of occasions
- Reverse protection, avoid burning down the module as connecting the wrong terminals
- Auto power saving function, user could set up on their own
- All options setting could be saved automatically, the content will not be lost even power down
- Paper instructions
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.09 pounds
See On Amazon #18
GAEYAELE Delay Off Time Relay 16A 1SPDT Electronic Adjustable Single Function Timer Delay Relay Din Rail Modular(GRT8-B1,AC/DC12V-240V)
Asin: B07CGB9XRD | Model: LE | PartNumber: LE | Ean: 0643845659301 | UPC: 643845659301
Time Scale 0.1S-10Days Divided Into 10Ranges.(0.1-1S,1-10S,6-60S,1-10Min,6-60Min,1-10Hr,0.1-1Day,1-10Day,Only On,Only Off)..
Ultra-Small Size,Only 18Mm Width,35Mm Rail Mounting.1-Module,Din Rail Mounting..
Wide Range Voltage: Ac/Dc12-240V Or Ac230v.Output Contact: 1Spdt(1No1nc) Or 2Spdt(2No2nc).Relay Status Is Indicated By Led..
High Cost Performance: Delay Can Be Set Directly Through The Panel Knob, Convenient And Intuitive..
Features
- Function Mode:It has two optional modes,A Delay ON or B Delay OFF.
- High Cost Performance: Delay can be set directly through the panel knob, convenient and intuitive.
- Time scale 0.1s-10days divided into 10ranges.(0.1-1s,1-10s,6-60s,1-10min,6-60min,1-10hr,0.1-1day,1-10day,only ON,only OFF).
- Wide range voltage: AC/DC12-240V or AC230V.Output contact: 1SPDT(1NO1NC) or 2SPDT(2NO2NC).Relay status is indicated by LED.
- Ultra-small size,only 18mm width,35mm rail mounting.1-MODULE,DIN rail mounting.
- See more on Amazon...
Brand: GAEYAELE | Manufacturer: ZHEJIANG GEYA ELECTRICAL CO.,LTD
Dimensions: 2.52 x 3.54 x 0.71 inches
See On Amazon #19
ACEIRMC Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-Off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply (2pcs)
Asin: B0897M956K | Ean: 0701715432116 | UPC: 701715432116
It Is A Multifunction Delay Relay Module.Lcd Display, Very Clear, Easy To Use, Powerful.It Can Be Widely Used At Smart Home,Industrial Control,Automatic Irrigation,Indoor Ventilation.Protection Equipment..
Auto Save: All Setting Parameters Are Automatically Saved By Power-Fail..
Independent Parameters: Op/Cl/Lop Parameters Can Be Modified And Saved, And They Are Individual..
Lcd Display: The Time Delay Relay Module Is Designed With Lcd Display, Can Clearly And Directly Show The Current Mode And Parameters..
Features
- timer relay operating voltage range is DC 6-30V, support micro USB 5.0 V power supply; support high level trigger 3.0v-34v and low level trigger 0v-0.2v; timing range is 0.01s~9999mins, can be continuously adjustable.
- LCD Display: the time delay relay module is designed with LCD display, can clearly and directly show the current mode and parameters.
- It is a multifunction delay relay module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home,Industrial control,Automatic irrigation,Indoor ventilation.Protection equipment.
- Independent Parameters: OP/CL/LOP parameters can be modified and saved, and they are individual.
- Auto Save: All setting parameters are automatically saved by power-fail.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #20
GAEYAELE 4 Channel Relay Module 1 SPDT DIN Rail Mount 24V DC/AC Interface Relay Module(FY-T734-24VACDC)
Asin: B07DYLKH74 | Ean: 0645249418713 | UPC: 645249418713
Switching Current Upto 10A At 250Vac Or 30Vdc..
Relay Status Indicator Led,Surge Suppression Protection And Overvoltage Protection Are Provided For Each Relay Channel..
Input Connections By Screw Terminal Block.Npn&Pnp In Common Use, Ac&Dc In Common Use..
Sub-Miniature Intermediate Power Relay,Approved Tuv,Ul And Rohs Compliant..
Features
- DIN Rail optional 1/2/4/8/16 channels relay interface modules.
- Sub-miniature intermediate power relay,approved TUV,UL and RoHS compliant.
- Switching current upto 10A at 250VAC or 30VDC.
- Input connections by screw terminal block.NPN&PNP in common use, AC&DC in common use.
- Relay status indicator LED,surge suppression protection and overvoltage protection are provided for each relay channel.
- See more on Amazon...
Brand: GAEYAELE | Manufacturer: ZHEJIANG GEYA ELECTRICAL CO.,LTD
Dimensions: 2.05 x 3.54 x 2.60 inches
See On Amazon
Looking For Something Else?
Search