DC Current Switch,Current Sensing Relay DC Current Sensing Switch 0-300A Amp Sensor Monitoring Relay D366
Asin: B09YNB2GZS | Model: Lelukee05040203 | PartNumber: Lelukee05040203 | Ean: 0795932814640 | UPC: 795932814640
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Indicator Light: The Indicator Light Is Off When There Is No Current, The Green Light Is On When The Current Is Lower Than The Threshold, And The Red Light Is On When The Current Is Higher Than The Threshold.
Detection Range: 0-50A, 6A@240V Ac/Dc Contact Capacity.
Delay Adjustment: Power-Off Delay Can Be Set From 0 To 99 Seconds, Clockwise To Increase And Counter-Clockwise To Decrease.
Set Threshold: Set The Threshold When The Perforation Current Exceeds The Threshold, The Relay Will Work, And When The Perforation Current Is Lower Than The Threshold, The Relay Will Reset.
Features
- Basic Function:When the piercing current exceeds the set value, the output switch will act Automatically reset when the piercing current is less than the set value.
- Set threshold: set the threshold when the perforation current exceeds the threshold, the relay will work, and when the perforation current is lower than the threshold, the relay will reset
- Indicator light: the indicator light is off when there is no current, the green light is on when the current is lower than the threshold, and the red light is on when the current is higher than the threshold
- Delay adjustment: power-off delay can be set from 0 to 99 seconds, clockwise to increase and counter-clockwise to decrease
- Detection range: 0-50A, 6A@240V AC/DC contact capacity
- See more on Amazon...
Brand: Lelukee | Manufacturer: Lelukee
See On Amazon Similar To DC Current SwitchCurrent Sensing Relay
#1
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #2
Timer Delay Relay DC 5V 12V 24V On Off Timer Module Trigger Cycle Dual MOS Delay Control Board with Digital Tube Display and Protective Shell for Smart Home, Automatic Control
Asin: B07T3KCQZB | Ean: 0608651949381 | UPC: 608651949381
★One Key Emergency Stop Function：The Module With One Key Emergency Stop Function (Stop Key), With Reverse Connection Protection, Reverse Connection Will Not Burn. And It Supports Sleep Mode. After Enabling, The Display Will Automatically Turn Off If Without Any Operation Within 5 Minutes. Press Any Button To Wake Up.
★Dual Mos Output: This Mos Tube Pulse Generator Uses Dual Mos Parallel Active Output, Lower Internal Resistance, Higher Current, And Strong Power. 15A, 400W At Normal Temperature. For More Details, Please Read The User Manual.
★Unlimited Switching Times：This Time Delay Switch Circuit Can Realize The Circuit High Frequency Fast And Frequent On And Off, Unlimited Switching Times. No Noise Will Be Generated During The On-Off Process, No Electric Sparks, And No Electromagnetic Interference. The Service Life Is Longer Than That Of Common Electromagnetic Relays.
Different Parameters Can Be Set: Op、Cl、Lop These Parameters Can Be Set. Op-On Time, Cl-Off Time, Lop-Number Of Cycles (1—999 Times, "---" Means Infinite Cycles). These Parameters Are Independent Of Each Other And Saved Separately. All Set Parameters Are Automatically Saved After Power-Off.
Features
- Wide working voltage The trigger cycle timer delay controller module work voltage is DC 5V-36V. Meet the use of most equipment. Control Current is 30A(Max and need a heat sink! Normal temperature 15A 400W). Trigger signal source: High-level trigger (3.0V~24V)
- Different parameters can be set: OP CL LOP these parameters can be set. OP-on time, CL-off time, LOP-number of cycles (1 999 times, --- means infinite cycles). These parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off
- One key emergency stop function The module with One key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. And it supports sleep mode. After enabling, the display will automatically turn off if without any operation within 5 minutes. Press any button to wake up
- Unlimited switching times This time delay switch circuit can realize the circuit high frequency fast and frequent on and off, unlimited switching times. No noise will be generated during the on-off process, no electric sparks, and no electromagnetic interference. The service life is longer than that of common electromagnetic relays
- Dual MOS output: This MOS tube pulse generator uses dual MOS parallel active output, lower internal resistance, higher current, and strong power. 15A, 400W at normal temperature. For more details, please read the user manual
- See more on Amazon...
Brand: PEMENOL
Dimensions: 1.54 x 2.36 x 0.55 Inches
See On Amazon #3
UCTRONICS DC 12V Programmable Multifunction Time Delay Relay Module with Segment LEDs Display for Smart Home, Automatic Control
Asin: B07BT32T1M | Model: U6030 | PartNumber: U6030
Auto Power Saving Function, User Could Set Up On Their Own.
Paper Instructions.
All Options Setting Could Be Saved Automatically, The Content Will Not Be Lost Even Power Down.
Reverse Protection, Avoid Burning Down The Module As Connecting The Wrong Terminals.
Features
- Programmable 18 delay modes, to meet the switch control of all kinds of occasions
- Reverse protection, avoid burning down the module as connecting the wrong terminals
- Auto power saving function, user could set up on their own
- All options setting could be saved automatically, the content will not be lost even power down
- Paper instructions
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.09 pounds
See On Amazon #4
Yeeco 30A High Current 12V Contactor Relay Switch Power Switch DC Power Switching Control Board Control Module Electrical Relay Switches for Cooler Heater Refit Water Heater Control
Asin: B00MKWACVI | Model: 1300199 | PartNumber: 1300199 | Ean: 0701203237612 | UPC: 701203237612
30A High Current 12V Contactor Relay Switch Dc Power Switching Control Board.
It Can Be Used To Cooler Control ,Heater Control ,Refit Water Heater Control.
30A Single Channel Relay Of 4 Terminal Shunt.
Control Voltage: 250V Max.
Features
- Input: 12V DC (relay powered)
- Control voltage: 250V Max
- 30A High Current 12V Contactor relay Switch DC power Switching Control Board
- 30A single channel relay of 4 terminal shunt
- It can be used to cooler control ,heater control ,refit water heater control
- See more on Amazon...
Brand: Yeeco | Manufacturer: Yeeco
Dimensions: 0.70 x 7.00 x 5.00 Inches | Weight: 0.02 pounds
See On Amazon #5
PEMENOL Delay Relay Module, DC 12V 24V Time Delay Relay Controller Board LCD Display Digital Timer Switch Trigger Cycle Timer Module Power On-Off Controller Support XH2.54-3P Connector
Asin: B081N5NG8Q | Model: 13339 | PartNumber: 13339
★With Reverse Connection Protection: This Trigger Delay Cycle Timing Circuit Switch Has A Key Pause Function, With Reverse Connection Protection, The Reverse Connection Does Not Burn.
★Automatic Sleep Function: In The Running Interface (P0~P7 Mode), Long-Press The Pause Button To Start Or Close The Automatic Sleep Function (L-P Selects On To Start The Sleep Function, About Five Minutes, Without Any Operation, The Lcd Backlight Automatically Turns Off, The System Normal Operation, Press Any Button To Wake Up; Press The Off Button To Turn Off The Sleep Function).
★Support Uart Data Upload And Parameter Setting: You Can Set Different Op, Cl, Lop Parameters, These Parameters Are Independent Of Each Other And Saved Separately. All Set Parameters Are Automatically Saved After Power-Off. For More Details, Please Read The User Manual.
★Support Button Trigger Control: The Relay Module Delay Power Off And Trigger Delay Cycle Timing Circuit Switch Support Button Trigger Control, High And Low Level Trigger, Switch Control, Suitable For Most Occasions.
Features
- LCD Display Shows a Variety of Parameters: The current mode and parameters are clear at a glance, very clear, simple and practical. In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system. In P4 ~ P7 mode, short press the DOWN key to switch the display content (running time/cycle number)
- Support Button Trigger Control: The relay module delay power off and trigger delay cycle timing circuit switch Support button trigger control, high and low level trigger, switch control, suitable for most occasions
- With Reverse Connection Protection: This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn
- Support UART Data Upload and Parameter Setting: You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off. For more details, please read the user manual
- Automatic Sleep Function: In the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function (L-P selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off, the system Normal operation, press any button to wake up; press the off button to turn off the sleep function)
- See more on Amazon...
Brand: PEMENOL | Manufacturer: PEMENOL
See On Amazon #6
Jadeshay AC Current Sensing Switch, SZC23-NO-AL-CH Adjustable 0.2-30A Normally Open Self-Powered Current Sensing Switch
Asin: B07Q2KDTHJ | Model: SZC23-NO-AL-CH | PartNumber: SZC23-NO-AL-CH | Ean: 0728614452915 | UPC: 728614452915
Intuitive Led Indicator: Integrated Led Indicator Provides A Convenient And Visual Display Of The Switch's Working Status, Allowing Users To Easily Monitor And Troubleshoot Any Issues..
Robust Design And Versatility: With Its Straight-Through Structure Design And Isolation Withstand Voltage Of Up To 2000V, Szc23 Current Sensing Switch Can Withstand Demanding Industrial Environments. It Is Suitable For A Wide Range Of Applications, Including Ac Current Measurement And Monitoring, Ac Motor Overload Protection, And Electronic Switch Control Systems..
High-Performance Switching: Equipped With A High-Power Mos Tube Electronic Switch, Szc23 Current Sensing Switch Ensures Efficient And Contactless Switching Operations. It Can Handle Numerous Opening And Closing Cycles Without Any Performance Degradation And Boasts A Rapid Reaction Speed In The Millisecond Range..
Self-Powered And Reliable: Unlike Other Current Sensing Switches On The Market, Current Sensing Switch Does Not Require An External Power Supply. This Ensures Reliable Operation Without The Need For Additional Wiring Or Power Sources..
Features
- Accurate and Adjustable Sensing: SZC23 series AC current sensing switch allows for easy and precise monitoring of AC currents ranging from 0.2A to 30A. With a built-in potentiometer, users can easily set the desired action current.
- Self-Powered and Reliable: Unlike other current sensing switches on the market, current sensing switch does not require an external power supply. This ensures reliable operation without the need for additional wiring or power sources.
- Intuitive LED Indicator: Integrated LED indicator provides a convenient and visual display of the switch's working status, allowing users to easily monitor and troubleshoot any issues.
- High-Performance Switching: Equipped with a high-power MOS tube electronic switch, SZC23 current sensing switch ensures efficient and contactless switching operations. It can handle numerous opening and closing cycles without any performance degradation and boasts a rapid reaction speed in the millisecond range.
- Robust Design and Versatility: With its straight-through structure design and isolation withstand voltage of up to 2000V, SZC23 current sensing switch can withstand demanding industrial environments. It is suitable for a wide range of applications, including AC current measurement and monitoring, AC motor overload protection, and electronic switch control systems.
- See more on Amazon...
Brand: Jadeshay | Manufacturer: jadeshay
Dimensions: 1.18 x 2.76 x 2.17 inches | Weight: 0.12 pounds
See On Amazon #7
HiLetgo NE555 DC 12V Delay Timer Switch Adjustable Module 0 to 10 Second
Asin: B01DK8NJNI | Model: 4350281287 | PartNumber: 4350281287
The Potentiometer To Adjust The Output Frequency..
Can Be Controlled Ac 250V/10A /Dc 0~30V/Max. 10A Equipment. (Maximum Control Equipment 2000W)..
With Input Power Indicator, With The Relay Is Energized Light..
The Delay Time Is Adjustable (0-10 Seconds), Delay Turn On..
Features
- Main Chip:NE555; Operating voltage: 12V DC.
- The delay time is adjustable (0-10 seconds), delay turn on.
- The potentiometer to adjust the output frequency.
- With input power indicator, with the relay is energized light.
- Can be controlled AC 250V/10A /DC 0~30V/max. 10A equipment. (Maximum control equipment 2000W).
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 pounds
See On Amazon #8
HiLetgo 3pcs ZMCT103C 5A AC Current Sensor Current Transformer Module Single Phase Active Analog Signal Output with OP Amp
Asin: B0CDWWYLMQ | Model: 3-01-1817 | PartNumber: 3-01-1817
On-Board Micro-Precision Current Transformer And Sampling Resistor.
Single Phase Active Analog Signal Output With Op Amp.
5A Can Be Measured Within An Alternating Current, The Analog Output Corresponding To 5A/5Ma.
Features
- ZMCT103C 5A AC Current Sensor Current Transformer Module
- 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA
- On-board micro-precision current transformer and sampling resistor
- Single Phase Active Analog Signal Output with OP Amp
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
NOYITO Voltage Relay Module Upper Lower Limit Detection Control Switch Off ON Over Voltage Protection Battery Charge Discharge Timing (12V)
Asin: B07DS33JVJ | Model: NOVRM12V | PartNumber: NOVRM12V | Ean: 0667797751043 | UPC: 667797751043
Module Working Current: Standby Average 16Ma/12V, Relay Pull-In 45Ma/12V, Digital Tube Off Standby Current 6Ma/12V;.
Relay Load: 10A / 277Vac 10A / 30 Dc Max Noyito Voltage Relay Module User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgu8pmkpoht52mmzc?E=Lg6z9b.
Relay Parameters: A Set Of Conversion (Normally Open Normally Closed Point), Contact Load: 10A/277Vac 10A/30 Dc (Note： The Maximum Dc Load 30V 10A) (Maximum Load Current Is 1A At 50V Dc Voltage)..
Module Working Voltage:: Dc 10-16V (12V Version) Dc18-28V (Dc24v Version) ("Note: The 24V Pulse Charger May Have More Than 30V Pulse Voltage And Cannot Be Used As The Power Supply For This Relay Board.")..
Features
- NOYITO Voltage Relay Module . Voltage detection display range: 0 - 99.9V; Voltage detection error: 0.1V;
- Module working voltage:: DC 10-16V (12V version) DC18-28V (DC24V version) (Note: The 24V pulse charger may have more than 30V pulse voltage and cannot be used as the power supply for this relay board.).
- Module working current: standby average 16mA/12V, relay pull-in 45mA/12V, digital tube off standby current 6mA/12V;
- Relay parameters: a set of conversion (normally open normally closed point), contact load: 10A/277VAC 10A/30 DC (NOTE the maximum DC load 30V 10A) (maximum load current is 1A at 50V DC voltage).
- Relay Load: 10A / 277VAC 10A / 30 DC Max NOYITO Voltage Relay Module User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgU8PmkPoht52mmzC?e=Lg6z9b
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.79 x 1.97 x 1.57 inches | Weight: 0.07 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #10
Dorhea 6PCS NE555 DC 5V Delay Timer Relay Switch Module Adjustable 0-10 Seconds Constant Current Regulator Timer Delay Converter for Automotive Control System Electrical Equipment
Asin: B08YYMF4M5 | Ean: 0701715461888 | UPC: 701715461888
Ne555 Delay Module, Which Consist Of High-Precision Potentiometer ( Adjust The Output Frequency.), High Frequency Filter Capacitor And With Input Power Indicator, With The Relay Is Energized Light .Vehicle Equipment-Delay To Prevent Car Ignition, Prevention Of High Sudden Current To Burn Components And Devices..
A Wide Range Of Applications: The Adjustable Timer Switch Relay Module Is Designed With Relay Module Continuous Current Flow Protection. This Module Is Perfect For Scm Learning, Electronic Competition, Product Development, Graduation Design And So On..
The Timer Switch Relay Module Can Be Adjustable Timer Delay(Default Setting:0-10S) And Counter Clockwise Adjustment Of Potentiometer To Increase Delay Time. Useful For Applications In Equipment-Delay To Prevent Sudden High Current Which Can Burn Components And Devices..
5V Module, The Output Can Be Connected To Ac 250V 10A And Dc 0-30V/Max.10A Equipment, And The Max Control Equipment Is Up To 2200W..
Features
- The timer delay is made of electronic accessories, inner conductor is pure copper. it is long lasting and durable for you to use.
- 5V module, the output can be connected to AC 250V 10A and DC 0-30V/max.10A equipment, and the max control equipment is up to 2200W.
- NE555 delay module, which consist of high-precision potentiometer ( adjust the output frequency.), high frequency filter capacitor and with input power indicator, with the relay is energized light .Vehicle equipment-delay to prevent car ignition, prevention of high sudden current to burn components and devices.
- The timer switch relay module can be adjustable timer delay(default setting:0-10s) and counter clockwise adjustment of potentiometer to increase delay time. Useful for applications in equipment-delay to prevent sudden high current which can burn components and devices.
- A wide range of applications: The adjustable timer switch relay module is designed with relay module continuous current flow protection. This module is perfect for SCM learning, electronic competition, product development, graduation design and so on.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon
Looking For Something Else?
Search