ENOMAKER Ender 3 Upgrade Linear Rail Guide Kit X Axis with Direct Drive Extruder Bracket, MGN12C Bearing Stainless Steel Guideway Slider Improve Speed for Creality Ender 3 Pro V2(300mm C-Type)
Asin: B0B3RSHW6D | Model: ENO-Upgrade-RailGuide | PartNumber: ENO-Upgrade-RailGuide | Ean: 0764481225528 | UPC: 764481225528
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【High Precision】High Strength, Low Noise, High Speed, Long Service Life..
Direct Drive Bracket Is Good At Printing Tpu Filament..
【Easy To Install】Together With Extruder Back Plate, T-Nuts And Screws, Hex Key For Easy Installation..
Smoother And Wearable Than The Pulley Wheels Structure..
【Rubber Stopper】With Rubber Plug On The Both Side Of Linear Rail To Prevent The Sliding Block From Falling Out..
【High Qaulity Linear Bearing】The Sliding Ball Is Made Of High Quality Steel, Wear Resistant, Low Noise, Smoother And Efficient Operation..
Features
- Linear Rail Guide with Direct Drive Extruder Bracket The X axis linear rail kit is special designed for Ender-3, Ender 3 Pro, Ender 3 V2.
- High Qaulity Linear Bearing the sliding ball is made of high quality steel, wear resistant, low noise, smoother and efficient operation.
- High Precision high strength, low noise, high speed, long service life.
- Rubber Stopper with rubber plug on the both side of linear rail to prevent the sliding block from falling out.
- Easy to Install Together with extruder back plate, T-nuts and screws, hex key for easy installation.
- Smoother and wearable than the pulley wheels structure.
- Direct Drive Bracket is good at printing TPU filament.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
Weight: 1.12 pounds
See On Amazon Similar To ENOMAKER Ender 3 Upgrade Linear
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 inches | Weight: 0.55 pounds
See On Amazon #2
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Creality Official 3D Printer Enclosure, Constant Temperature Protective Cover Fireproof Dustproof 480 * 600 * 720mm for Ender 3 V3 SE/Ender 3/Ender 3 V2/Ender 3 V2 Neo/Ender 3Pro/Ender 3Neo/Ender 3S
Asin: B0C89ZHH8N
【Fireproof, Waterproof And Dust-Proof】- Made Of Flame-Retardant Aluminum Foil Cloth Material, Creality 3D Printer Tent Has Fire-Resistant, High Temperature Resistant, Flame-Retardant And Corrosion-Resistant. The Special Shell Fabric Is Waterproof And Non-Leaking. The Enclosed Space Avoids Dust Affecting The Quality Of The Printed Work And Staining The Printer..
【Easy To Install】- Easy To Assemble And Disassemble, Easy To Use And Folded For Storage. According To The Instructions In The Installation Manual, The Assembly Can Be Completed In A Few Simple Steps Without Additional Tools. The Frame Made Of Glass Fiber Solid Rod, Which Are Strong And Reliable..
【Professional Support】- If You Have Any Problems About The Product, Please Do Not Hesitate To Contact Us Via "Ask A Question". We Will Provide Friendly And Fast Service To Solve Your Problem Within 24 Hours..
【Large Transparent Window】- The 3D Printer Enclosure Has A Large Transparent Viewing Window That Allows You To Observe The Printing Process At Any Time. Furthermore, There Is A Tool Bag On The Left Side For 3D Printer Tools And Accessories..
【Constant Temprature】- This 3D Printer Cover Keeps A Constant Temperature 3D Printing Environment, Reducing The Adverse Effects Of Low Temperature Weather On The Printed Model. Helps With Bed Adhesion At High Temperatures, Improving Printing Stability. Effectively Reduce Printing Works Warping, Uneven And Other Problems..
Features
- Large Space Wide Compatibility - Creality 3D printer enclosure size 18.9*23.6*28.4 inch (480*600*720mm). It is compatible with Ender-3, Ender-3S, Ender-3 Pro, Ender-3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender 2, Ender 2 Pro, CP-01, and other 3D printers.
- Constant Temprature - This 3D printer cover keeps a constant temperature 3D printing environment, reducing the adverse effects of low temperature weather on the printed model. Helps with bed adhesion at high temperatures, improving printing stability. Effectively reduce printing works warping, uneven and other problems.
- Fireproof, Waterproof and Dust-proof - Made of flame-retardant aluminum foil cloth material, Creality 3D printer tent has fire-resistant, high temperature resistant, flame-retardant and corrosion-resistant. The special shell fabric is waterproof and non-leaking. The enclosed space avoids dust affecting the quality of the printed work and staining the printer.
- Large Transparent Window - The 3D printer enclosure has a large transparent viewing window that allows you to observe the printing process at any time. Furthermore, There is a tool bag on the left side for 3D printer tools and accessories.
- Easy to Install - Easy to assemble and disassemble, easy to use and folded for storage. According to the instructions in the installation manual, the assembly can be completed in a few simple steps without additional tools. The frame made of glass fiber solid rod, which are strong and reliable.
- Professional Support - If you have any problems about the product, please do not hesitate to contact us via ask a question. We will provide friendly and fast service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 23.62 x 27.56 x 18.90 inches
See On Amazon #4
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 inches | Weight: 0.26 pounds
See On Amazon #5
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #6
Creality Ender 3 V3 SE 3D Printer, 250mm/s Printing Speed FDM 3D Printers with CR Touch Auto Leveling, Sprite Direct Extruder Auto-Load Filament Dual Z-axis & Y-axis, Printing Size 8.66*8.66*9.84 inch
Asin: B07D18L9K6 | Model: Ender 3 V3 SE | PartNumber: Ender 3 V3 SE | Ean: 0649910290448 | UPC: 649910290448
Capable "Sprite" Direct Extruder: The "Sprite" Direct Extruder Of Ender 3 V3 Se Enables Smooth Feeding Of Various Filaments, Including Pla, Petg, And Tpu. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
32-Bit Silent Mainboard&More: This Printer Equips A 32-Bit Silent Mainboard With An Advanced Stepper Motor Drive To Control All Axes More Precisely For Less Operation Noise. The Pc Spring Steel Build Plate Is Sticky And Flexible, Making It Easy To Remove The Printed Models By Bending It Slightly. Moreover, Ender 3 V3 Se Equips The Auto Filament Loading And Uploading, One Tap To Load The Filament, And One Tap To Unload It. Warning: Please Make Sure The Side Of The Power Supply Is Chosen At 115V Before Power On..
“Dual” Stable Structure: Creality Ender 3 V3 Se, Dual Z-Axis Synced By A Quality Timing Belt, Ensuring High Print Quality. The Rigid Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Which Underpins A Steady And Accurate Motion Of The Build Platform For A Lasting Time..
Easily Start To Print: Creality Ender 3 V3 Se 3D Printer Is Easy To Put Together In 3 Steps Within About 20 Minutes Only. It Equips Cr Touch For Auto Leveling And Strain Sensor For Auto Z Offset. It Is Easy To Get A Perfect First Layer. Leveling Is The Important Process Before Printing, It Usually Make Customers In Trouble. This Printer Can Save Your Time In Leveling, And Easily Start To Print. Which Is Friendly To All Of Customers Including The Beginners..
Features
- FASTER AND LIVELY PRINTING EXPERIENCE: Ender 3 V3 SE 3d printer can print at up to 250mm/s speed with 2500mm/s acceleration, faster than most of printers on the market. You can complete models efficiently, saving time to wait for print jobs. Moreover, it can keep good printing quality at the same time. The Optimized UI uses motion graphics to display the leveling process and other parameters, so you will know how the printer is doing at a glance, providing you a perfect printing experience.
- EASILY START TO PRINT: Creality Ender 3 V3 SE 3D printer is easy to put together in 3 steps within about 20 minutes only. It equips CR Touch for auto leveling and strain sensor for auto Z offset. It is easy to get a perfect first layer. Leveling is the important process before printing, it usually make customers in trouble. This printer can save your time in leveling, and easily start to print. Which is friendly to all of customers including the beginners.
- CAPABLE SPRITE DIRECT EXTRUDER: The Sprite Direct Extruder of Ender 3 V3 SE enables smooth feeding of various filaments, including PLA, PETG, and TPU. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- DUAL STABLE STRUCTURE: Creality Ender 3 V3 SE, Dual Z-axis synced by a quality timing belt, ensuring high print quality. The rigid dual Z-axis lead screws reduce Z wobbling effectively. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, which underpins a steady and accurate motion of the build platform for a lasting time.
- 32-BIT SILENT MAINBOARD&MORE: This printer equips a 32-bit silent mainboard with an advanced stepper motor drive to control all axes more precisely for less operation noise. The PC spring steel build plate is sticky and flexible, making it easy to remove the printed models by bending it slightly. Moreover, Ender 3 V3 SE equips the auto filament loading and uploading, one tap to load the filament, and one tap to unload it. Warning: Please make sure the side of the power supply is chosen at 115V before power on.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 19.30 x 14.33 x 13.74 inches | Weight: 15.60 pounds
Warranty: 1 year
See On Amazon #7
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder, Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer
Asin: B09ZQT9DJY
High-Quality Stepping Motor: With Low Power, Stable Speed And Performance, Low Noise, And No Step Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
After-Sales Service: If You Have Any Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Low Noise & High Precision: It Fits Perfectly With The High-Strength Synchronous Wheel And Synchronous Gear, Which Ensures Its High Precision, Reduces Vibration And Noise During Work, And Provides You With A Relatively Quiet Printing Environment..
Parameter: 1.8-Degree Step Angle, 0.4 N.M Holding Torque, With 1A Rated Current Per Phase. (The Connecting Cable Is Not Included.).
Features
- Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
- Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
- High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
- After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 2.36 x 1.65 x 1.65 inches
See On Amazon #9
Creality Ender 3 V3 SE 3D Printer, 250mm/s Faster Printing Speed CR Touch Auto Leveling Sprite Direct Extruder Dual Z-Axis Auto Filament Loading Ender 3D Printer Print Size 8.66x8.66x9.84 inch
Asin: B0CNWFDBZ6 | Model: Upgrade Creality Ender-3 V3 SE | PartNumber: Upgrade Creality Ender-3 V3 SE
【Worry-Free Cr Touch Auto Leveling & Strain Sensor】Ender-3 V3 Se 3D Printer Features A Cr Touch Sensor For Auto Leveling And A Strain Sensor For Auto Z-Offset. Just Lay Back And Enjoy The Print Success, There Is No Need To Participate Manually Throughout The Process, Making Leveling Much Easier..
【Auto Filament Loading & Unloading】Ender 3 V3 Se Supports Automatic Loading And Unloading Filament Function. Tap "Extrude", And The Filament Will Flow Out Of The Nozzle Smoothly. Tap "Retract", And The Filament Will Exit Quickly. So, It Is Effortless To Replace The Filament..
【Creality Official Support Service】Creality Provides 12-Month After-Sales Service For The Creality Ender-3 V3 Se 3D Printers. If You Have Any Question Or Need Support About The Product, Please Contact Me Via Amazon, We Will Respond With 24 Hours..
【Quick Assembly & Easy To Use】Preassembly Has Solved Those Hassles And Worries Of Parts Assembly, It Only Takes 3 Steps To Complete The Assemble The Ender-3 V3 Se 3D Printer, It Only Takes 20 Minutes From The Unpacking To The First Printing..
【Stable Dual Z-Axis & Y-Axis Linear Shafts】High-Precision Dual Z-Axis Lead Screws Reduce Z Wobbling Effectively, Avoid Printing Deviation In Single-Axis Printing. The Y-Axis Features Two 8Mm Linear Shafts Made Of Strong And Wear-Proof Steel, Ensuring Printing Stability And Higher Printing Accuracy Over A Long-Lasting Time..
【Powerful"Sprite" Direct Extruder】Ender 3 V3 Se Is The Upgrade Of Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 3 S1, Ender 3 S1 Pro Etc 3D Printer, Comes With The New Upgraded "Sprite" Full Metal Dual-Geardirect Extruder, More Powerful Extruder Pushing Force And Lightweight, The Extruder Realizes Smooth Feeding And Discharging Of Flaments Without Slipping. Works Extremely Well In Printing Flaments Like Pla, Tpu, Petg, Etc. And The Extruder Is Market-Proven For Its Reliability, As Over 500,000 Units Have Been Shipped Worldwide..
Features
- 250mm/s High-speed Printing Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s acceleration.The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.
- PowerfulSprite Direct Extruder Ender 3 V3 SE is the upgrade of ender 3, ender 3 v2, ender 3 pro, ender 3 neo, ender 3 v2 neo, ender 3 s1, ender 3 s1 pro etc 3d printer, comes with the new upgraded Sprite full metal dual-geardirect extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc. And the extruder is market-proven for its reliability, as over 500,000 units have been shipped worldwide.
- Worry-free CR Touch Auto Leveling & Strain Sensor Ender-3 V3 SE 3d printer features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.
- Stable Dual Z-axis & Y-axis Linear Shafts High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.
- Creality Official Support Service Creality provides 12-month after-sales service for the creality ender-3 v3 se 3d printers. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.
- Quick Assembly & Easy to Use Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender-3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.
- Auto Filament Loading & Unloading Ender 3 V3 SE supports automatic loading and unloading filament function. Tap Extrude, and the filament will flow out of the nozzle smoothly. Tap Retract, and the filament will exit quickly. So, it is effortless to replace the filament.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 15.00 x 22.00 x 9.00 inches | Weight: 15.60 pounds
Warranty: 1 year warranty
See On Amazon #10
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #11
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 3 Neo/3 V2 Neo/3 Max Neo
Asin: B09NMJMPN1 | Model: Creality Ender 3 Mainboard | PartNumber: Creality Ender 3 Mainboard
【Driver】Tmc2225 Driver & V0.0.6 Firmware From Creality ( Based On Marlin 2.0.1) For V4.2.7 Board. The Bootloader Has Been Preinstalled..
【After Sale Service】Any Issues Or Questions About Our Product Please Feel Free To Contact Us At Any Time. We Have Professional Technical Team To Provide Technical Supports For You Within 24 Hours..
【Update Firmware Method】Please Copy The Correct Firmware File To A Formated Sd Card With No Other Files In It. Turn Off The Printer And Unplug The Power Cord. Insert The Sd Card & Power Cord, And Turn On The Printer. Wait 10S To Complete The Firmware Updating Process..
【Widely Application】Compatible With Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D Printers. Please Notice: It Only Plug And Play For Ender-3. If You Want To Install It On Other Machine, Please Flash The Relative Machine V4.2.7 Firmware. You Can Download Firmware From Official Website..
Features
- Super Quiet The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
- Widely Application Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 3 Neo,Ender 3 V2 Neo/Ender 3 Max Neo 3D printers. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
- Driver TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
- Update Firmware Method Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
- After Sale Service Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.26 pounds
See On Amazon #12
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #13
Creality Ender 3 Auto Bed Leveling Kit, Official CR Touch for Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard, 3D Printer Leveler Sensor Tool Kit Silicone Mounts
Asin: B0BXGCHZDL
More Professional Design: Compared With The Old Bl Touch, The New Cr Touch Uses A Combination Of Optical And Metal Probes, Which Increases The Service Life And Reduces Errors Caused By Magnetic Fields And Temperatures. 3D Automatic Bed Leveling Is Compatible With Pei, Stickers, Glass, Metal Platform. The Number Of Detections Has Reached A Revolutionary 100,000 Times, And The Positioning Accuracy Is ≤0.04Mm..
Package Includes: 1*Cr Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4M Power Cord, 3*Tie Straps, 4*Screws. Download The Firmware From The Official Website Of Creality And Copy It To The Blank Sd Card, Insert It Into The Card Slot Of The 3D Printer, Turn On The Power, And The Printer Will Read And Install The Firmware..
Strong Compatibility: Cr Touch Is An Automatic Leveler Specially Designed For Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/Cr-10 Models, Only Applicable To 32-Bit V4.2.2 And V4.2.7 Motherboards. The Included 3 Brackets Can Be Easily Installed On The Above Models..
Automatic Leveling: Cr Touch Conducts Multi-Point Detection On The Printing Platform, Records The Distance Of Each Point, And Constructs A Virtual Plane. Carry Out Distance Compensation Calculation When Printing, And Automatically Adjust The Nozzle Distance. Matched With The Silicone Leveling Column, It Can Be Leveled For A Long Time After One Leveling. Multiple Use Only Needs To Be Checked With Cr Touch..
Features
- After-sales Service: In order to let more 3D printing enthusiasts enjoy the comfort of CR Touch, we wholeheartedly provide you with 24-hour online after-sales service. Regardless of the various problems you encounter during the installation and use of CR Touch, please contact us in time, and our professional technical team will provide you with detailed solutions.
- Automatic Leveling: CR Touch conducts multi-point detection on the printing platform, records the distance of each point, and constructs a virtual plane. Carry out distance compensation calculation when printing, and automatically adjust the nozzle distance. Matched with the silicone leveling column, it can be leveled for a long time after one leveling. Multiple use only needs to be checked with CR Touch.
- More Professional Design: Compared with the old BL Touch, the new CR Touch uses a combination of optical and metal probes, which increases the service life and reduces errors caused by magnetic fields and temperatures. 3D automatic bed leveling is compatible with PEI, Stickers, Glass, Metal platform. The number of detections has reached a revolutionary 100,000 times, and the positioning accuracy is 0.04mm.
- Strong Compatibility: CR Touch is an automatic leveler specially designed for Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/CR-10 models, Only applicable to 32-bit V4.2.2 and V4.2.7 motherboards. The included 3 brackets can be easily installed on the above models.
- Package Includes: 1*CR Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4m Power Cord, 3*Tie Straps, 4*Screws. Download the firmware from the official website of Creality and copy it to the blank SD card, insert it into the card slot of the 3D printer, turn on the power, and the printer will read and install the firmware.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #14
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches | Weight: 0.66 Pounds
See On Amazon #15
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 Pounds
See On Amazon #16
Creality Ender-3 V3 KE 3D Printer, 500 mm/s High-Speed Printing with Auto-Leveling, Sprite Direct Extruder Supports 300 Printing, Smooth Detail, 220 220 250 mm Print Volume
Asin: B0CVVR6W27 | Model: Ender-3 V3 KE | PartNumber: Ender-3 V3 KE
Ultra-Smooth & Stable Motion: Ender-3 V3 Ke 3D Printer Robust Structure And Precision-Engineered Components Guarantee Smooth And Steady Movements. Upgraded The X-Axis Has A Carriage Slide Containing Ball Bearings, Yielding High-Quality Prints Every Time.
Hassle-Free Printing, User-Friendly: Creality 3D Printers Support Three Ways Of Printing, Phone Control, Wifi, And Usb Drive. Upgraded Easy To Install All-In-One Design, As Well As Filament Shift Sensor And Power Failure Recovery Function To To Save Time And Filament. Ideal 3D Printer Gift For Home, Beginners, Kids.
Precision-Focused Design: With Smart Algorithms Function, It Mitigates The Printer's Vibrations For Minimal Ringing Or Ghosting. Precise 0.1 Mm Printing Accuracy. Also Has Dual Fans For Fast Model Cooling, Making Your Prints Always In Good Shape.
Reliability & Versatile Printing: High Configuration Sprite Direct Extruder, 60W Ceramic Heater, Bi-Metal Heatbreak, And Copper Nozzle Enable 300℃ Printing And Smooth Feeding Of Various Filaments. Ender V3 Ke Can Handle Hyper Pla, Petg, Abs, Tpu(95A) And Asa Filaments.
Features
- Enhanced Faster & Smarter: Creality Ender 3 V3 KE can print at up to 500mm/s speed with 8000mm/s acceleration, lessening your waiting time. The intuitive touch UI screen and real-time model preview make your printing process smoother. Also features a CR Touch sensor for auto leveling, ensures accurate leveling of the build platform
- Reliability & Versatile Printing: High configuration Sprite Direct Extruder, 60W ceramic heater, Bi-metal heatbreak, and copper nozzle enable 300 printing and smooth feeding of various filaments. Ender V3 KE can handle Hyper PLA, PETG, ABS, TPU(95A) and ASA filaments
- Ultra-Smooth & Stable Motion: Ender-3 V3 KE 3d printer robust structure and precision-engineered components guarantee smooth and steady movements. Upgraded the X-axis has a carriage slide containing ball bearings, yielding high-quality prints every time
- Precision-focused Design: With smart algorithms function, it mitigates the printer's vibrations for minimal ringing or ghosting. Precise 0.1 mm Printing Accuracy. Also has dual fans for fast model cooling, making your prints always in good shape
- Hassle-free Printing, User-friendly: Creality 3D printers support three ways of printing, phone control, WiFi, and USB drive. Upgraded easy to install all-in-one design, as well as filament shift sensor and power failure recovery function to to save time and filament. Ideal 3D printer gift for home, beginners, kids
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 9.84 x 8.66 x 8.66 inches | Weight: 17.20 pounds
Warranty: 1 Years
See On Amazon #17
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 Inches | Weight: 2.01 pounds
See On Amazon #18
3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium
Asin: B0CDXCTQP1 | Model: Enclosure-M | PartNumber: Enclosure-M | Ean: 0792105752396 | UPC: 792105752396
【Dustproof And Fireproof, Safe To Use】Protect Your 3D Printer And Reduce The Risk Of Accidents With Fire-Resistant Materials And A Sturdy Structure. Avoid Dust Particles From Entering And Negatively Impacting Print Quality, Ensuring Stable And Perfect Results Every Time. Effectively Prevent Accidental Touches From Children Or Pets..
【Isolate Noise And Enjoy Creation Quietly】 An Enclosed 3D Printer Cover With All Six Sides Effectively Blocks The Transmission Of Printing Noise, Effectively Reduce Noise And Enjoy The Silent Printing Process，.
【Wide Compatibility】Support Printer Size (Include Spool Holder Height) Is Smaller Than 28.7×25.6×21.6". Please Measure Your Printer Height Before Ordering. Compatible With Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6Se/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/Elegoo Naptune 3D Printer..
【Fast Installation And Long-Term Use】5 Minutes Easy Installation, Quick Start And Easily Disassembled For Moving Or Replacing. Its Robust Construction Ensures Stability During Operation, Minimizing Vibrations That Could Compromise Print Precision, And Can Support Your Long-Term Use And Is Not A Disposable Product..
【Improve Print Quality With Constant Temperature】Provides A Stable And Controlled Environment For Your Prints, Maintaining A Consistent Temperature During Printing Ensures That You Produce High-Quality Prints While Avoiding Print Failures And Material Wastage. Constant Temperature Reduces The Risk Of Material Clogs And Jams, Enhancing Your Printing Speed And Efficiency..
Features
- Enhanced Illumination For Your Printing Area Improve your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
- Improve Print Quality with Constant Temperature Provides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to Use Protect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use 5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process
- Wide Compatibility Support printer size (include spool holder height) is smaller than 28.7 25.6 21.6. Please measure your printer height before ordering. Compatible with Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6SE/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/ELEGOO Naptune 3D Printer.
- See more on Amazon...
First Available: 08/29/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 80.00 x 45.00 x 25.00 inches | Weight: 4.30 Pounds
Warranty: 180-Warranty
See On Amazon #19
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #20
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon
Looking For Something Else?
Search