3 Phase Voltage Sequence Relay 4 Wire Over Under Voltage Protection Relay AC 208V to 480V
Asin: B0B9ZFLLQG | Model: Hilitandvo8a62x3n56520 | PartNumber: Hilitandvo8a62x3n56520
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Standard Din Rail】 The Protector Is Standard Modular Structure, 35Mm Guide Rail Installation, With Ultra Wide Voltage Design, Universal For Worldwide. Dimension(Lxwxh): Approx.80X43x54mm/3.1X1.7X2.1In..
【Multi Usage】 The Under Voltage Relay Can Be Widely Used In Machine Tool, Crane, Control Cabinet, Compressor, Cutting Machine, Elevator, Air Conditioner, Elevator, Freezer, Water Pump, Charging Pile, Motor, Etc..
【Multi Protection】 Real Time Monitoring, The Protector Has Protections Of Overvoltage, Undervoltage, Voltage Unbalance, Phase Error, Phase Loss, Zero Line Disconnection..
【2 Reset Methods】 Led Display, This Digital Voltage Relay Can Be Reset Automatically Or Manually, Choose According To Different Situations. Low Power Consumption And Long Mechanical Life..
Features
- Value Adjustable The overvoltage, undervoltage, unbalance values can be adjusted, and each action time can also be adjusted.
- 2 Reset Methods LED display, this digital voltage relay can be reset automatically or manually, choose according to different situations. Low power consumption and long mechanical life.
- Standard DIN rail The protector is standard modular structure, 35mm guide rail installation, with ultra wide voltage design, universal for worldwide. Dimension(LxWxH): Approx.80x43x54mm/3.1x1.7x2.1in.
- Multi Protection Real time monitoring, the protector has protections of overvoltage, undervoltage, voltage unbalance, phase error, phase loss, zero line disconnection.
- Multi Usage The under voltage relay can be widely used in machine tool, crane, control cabinet, compressor, cutting machine, elevator, air conditioner, elevator, freezer, water pump, charging pile, motor, etc.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon Similar To 3 Phase Voltage Sequence Relay
#1
ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
Asin: B01D8KOZF4 | Model: EL-KIT-003 | PartNumber: EL-KIT-003 | Ean: 0746591610623 | UPC: 746591610623
Lcd1602 Module With Pin Header (Not Need To Be Soldered By Yourself).
High Quality Kit With Uno Board, Compatible With Arduino Uno R3, Mega 2560 R3, Nano..
This Is The Upgraded Starter Kits With Power Supply Module, 9V Battery With Dc.
The Most Economical Kit Based On Arduino Platform To Starting Learning Electronics For Those Beginners Who Are Interested..
Features
- Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
- The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested.
- Lcd1602 module with pin header (not need to be soldered by yourself)
- This is the upgraded starter kits with power supply module, 9V battery with dc
- High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO.
- See more on Amazon...
First Available: 10/31/2018
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 1.97 x 8.30 x 5.50 inches | Weight: 1.20 Pounds
Warranty: CHOKING HAZARD -- Small parts. Not for children under 3 yrs.
See On Amazon #2
irhapsody 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Asin: B074FSZWVT | Model: 13 | PartNumber: 13
Be Careful When Inserting The Relay Into The Socket. If You Force It, You Will Bend The Female Connectors.
Nominal Coil Voltage: 12 V Dc; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V Dc; Must Release Voltage: 0.6~3.6 V Dc; Maximum Applied Voltage: 15.6 V Dc.
Primary Leads Use 12 A.W.G Tinned Copper Wire. Coil Leads Use 16 A.W.G.
12-Volt 5-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 ; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 1.70 x 7.85 x 1.60 inches | Weight: 1.25 pounds
Warranty: ONE YEAR WARRANTY
See On Amazon #3
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
Iot Relay - Enclosed High-Power Power Relay for Arduino, Raspberry Pi, PIC or WiFi, Relay Shield
Asin: B00WV7GMA2 | Model: IoT | PartNumber: IoT | Ean: 5269692770683, 0705020645490 | UPC: 705020645490
Wires To Your Arduino, Raspberry Pi, Pic, Or Other Micro.
Includes Surge Supression, Debounce, Safety Breaker.
Takes The Place Of A Relay Board. Fully Assembled And Ready To Use..
One Circuit, 4 Outlets, 2X Nc, 2X No.
Features
- Safe, Reliable Power Control
- One circuit, 4 outlets, 2x NC, 2x NO
- Wires to your Arduino, Raspberry Pi, PIC, or other micro
- Takes the place of a relay board. Fully assembled and ready to use.
- Includes surge supression, debounce, safety breaker
- See more on Amazon...
Brand: DLI 705020645490 | Manufacturer: Digital Loggers
See On Amazon #5
Tnisesm 2PCS Power Relay AC120V Coil, 30A SPDT(1NO 1NC) 120 VAC with Flange Mounting and 10 Quick Connect Terminals Wires Mini Relay NT90-AC120V-10X
Asin: B087G6D24G | Model: NT90-AC120V-10X | PartNumber: NT90-AC120V-10X
Easy To Use: Attached With Crimping Terminals Wires For Worry-Free Installation..
Package Content : 2 X Power Relay, 10 Terminal Wires.
Epoxy Sealed Versions Available.
Coil Voltage : Ac 120V; 30A Spdt 240Vac.
Features
- Product Type: Power Relay with Terminal Wires; SPDT(1NO 1NC)
- Coil Voltage : AC 120V; 30A SPDT 240VAC
- Easy to use: Attached with crimping terminals wires for worry-free installation.
- Epoxy sealed versions available
- Package Content : 2 x Power Relay, 10 Terminal Wires
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #6
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 inches | Weight: 0.09 pounds
See On Amazon #7
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load：The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 Pounds
Warranty: no
See On Amazon #8
AEDIKO 4pcs DC 5V Relay Module 1 Channel Relay Switch Relay Board with Optocoupler Isolation Support High or Low Level Trigger
Asin: B095YD3732 | Ean: 0701715480582 | UPC: 701715480582
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 5V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 inches
See On Amazon #9
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #10
irhapsody 120amp 12v Continuous Duty Relay, 4-pin Spst High-Current Starter Relay
Asin: B0BJ9RQFWX | Model: AutoRelaySet-12V120A | PartNumber: AutoRelaySet-12V120A
Ideal For Split Charging Or Any Vehicle Needing A High-Power Relay.
The Size Of The Round Stud Terminals: M6/6Mm.
Never Go Beyond Its Capabilities; Try To Stay 10 To 15% Below What The Rate Is For.
Large Capacity, High Current Carrying Capacity, Heavy-Duty Make/Break Relay.
Features
- Coil power: 1.8w, and coil resistance is 80 ohms. It is more reliable than 2.4w((60 ohms) and 4.8w(30 ohms) relays on the market
- Large capacity, high current carrying capacity, heavy-duty make/break relay
- Ideal for split charging or any vehicle needing a high-power relay
- Never go beyond its capabilities; try to stay 10 to 15% below what the rate is for
- The size of the round stud terminals: M6/6mm
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 3.00 x 1.70 x 1.70 inches
Warranty: one-year warranty
See On Amazon #11
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #12
TWTADE/JQX-62F-2Z Coil Voltage AC 110V 80A DPDT Electronmagnetic Relay,High Power Relay AC 110V
Asin: B07FCJFGL9 | Model: JQX-62F-2Z DC 48V | PartNumber: JQX-62F-2Z DC 48V | Ean: 0673257216540 | UPC: 673257216540
Contact Type : Dpdt 2No+2Nc;Terminals: 8.
Weight : 320G ;Package Content: 1 X High Power Relay + 8 X Terminals.
Size (Approx.): 85 X 65 X 65Mm/ 3.3" X 2.5" X 2.5"(L*W*H).
Coil: Ac 110V; Load : 80A 28V Dc /250V Ac.
Features
- Product Name: Relay; Model : JQX-62F-2Z AC 110V
- Coil: AC 110V; Load : 80A 28V DC /250V AC
- Contact Type : DPDT 2NO+2NC;Terminals: 8
- Size (Approx.): 85 x 65 x 65mm/ 3.3 x 2.5 x 2.5(L*W*H)
- Weight : 320g ;Package Content: 1 x High Power Relay + 8 x Terminals
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon #13
Electromagnetic Power Relay, 8-Pin 10 AMP 110V/120V AC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ 2PCS [Applicable for DIN Rail System]
Asin: B0BND2FPZ3
Coil Voltage: 110V/120V Ac; Contact Capacity: 10A 240Vac With Din Rail And Self-Tapping Screws..
Led Signal Lamp : It Can Judge The Ac Or Dc Coil, And Judge Whether The Coil Is Energized.
Red Mechanical Indicatoe:It Can Intuitively Judge Whether The Relay Is Attracted.
Product Name: Electromagnetic Power Relay; Model: Yj2n-Ly Type: Dpdt; Number Of Terminals: 8.
Features
- Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc
- Product Name: Electromagnetic Power Relay; Model: YJ2N-LY Type: DPDT; number of terminals: 8
- Coil voltage: 110V/120V AC; Contact capacity: 10A 240VAC with din rail and self-tapping screws.
- Red mechanical indicatoe:It can intuitively judge whether the relay is attracted
- LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized
- See more on Amazon...
Brand: VAMRONE | Manufacturer: YYUAN
Dimensions: 2.50 x 3.00 x 0.90 inches
See On Amazon #14
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #15
mxuteuk 2pcs JQX-13FL AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay, with Base, with DIN Rail Slotted Aluminum
Asin: B07QXWZP3R | Model: 13 | PartNumber: 13 | Ean: 0741416011425 | UPC: 741416011425
Coil Voltage:Ac 110V; Contact Capacity: 10A 250Vac/10A 28Vdc;.
Package Content : 2 X Power Relay + 2 X Socket + 1 X Rail Slotted Aluminum + 2 X Screw.
Overall Size(Approx. ): 79 X 28 X 64Mm/3.1" X 1.1" X 2. 5"(L*W*H).
Mount Rail Type : 35Mm Din Rail; Din Rail Length : 100Mm/4"(L).
Features
- Product Name:Electromagnetic Power Relay; Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ; Socket Model : PTF08A-E
- Mount Rail Type : 35mm DIN Rail; DIN Rail length : 100mm/4(L)
- Coil Voltage:AC 110V; Contact Capacity: 10A 250VAC/10A 28VDC;
- Overall size(approx. ): 79 x 28 x 64mm/3.1 x 1.1 x 2. 5(L*w*h)
- Package Content : 2 x Power Relay + 2 x Socket + 1 x Rail Slotted Aluminum + 2 x Screw
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #16
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 12V
Asin: B00LW15F42 | Model: 3-01-0342 | PartNumber: 3-01-0342 | Ean: 0702082655962 | UPC: 702082655962
The Module Can Be High Or Low By A Jumper Setting Trigger;.
Fault-Tolerant Design , Even If The Control Line Is Broken , The Relay Will Not Operate ;.
Interface Design Humane, All Interfaces Can Be Connected Directly Via Terminal Wiring Leads , Very Convenient ;.
With Patch Optical Isolation, Strong Drive Ability And Stable Performance;.
Features
- Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
- With patch optical isolation, strong drive ability and stable performance;
- The module can be high or low by a jumper setting trigger;
- Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
- Fault-tolerant design , even if the control line is broken , the relay will not operate ;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.72 x 2.00 x 1.60 inches | Weight: 0.11 pounds
See On Amazon #17
HiLetgo 12V 4 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LW2GM84 | Model: 3-01-0371 | PartNumber: 3-01-0371 | Ean: 0702082656167 | UPC: 702082656167
High And Low Level Trigger.
Using Smd Optocoupler Isolation.
Features
- HiLetgo 12V 4 Channel Relay Module
- Using SMD OPTOCOUPLER isolation
- High and Low Level Trigger
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
Supco 90340 General Purpose Switching Relay, 24 V Coil Voltage, Double Pole Double Throw Contacts
Asin: B004XS1ZT0 | Model: 90340 | PartNumber: 90340 | Ean: 0687152066810 | UPC: 687152066810
Ul Recognized For Safety, And Csa Certified For Quality Assurance.
Suitable For Use In Hvac/R, Vending Machines, Fan Controls And Business Machine Applications.
Dpdt For Simple Changeover Switching.
Features
- Switching relay for receiving and controlling electric signals
- DPDT for simple changeover switching
- UL recognized for safety, and CSA certified for quality assurance
- Suitable for use in HVAC/R, vending machines, fan controls and business machine applications
- See more on Amazon...
Brand: Supco | Manufacturer: Supco
Weight: 0.34 pounds
See On Amazon #19
Fastronix 40/60A Waterproof Relay 6 Pack
Asin: B016XDDMSE | Model: 900-001 | PartNumber: 900-001 | Ean: 0635414975103 | UPC: 635414975103
Features Negative Spike Suppression.
Standard Bosch Style Relay.
Can Be Used For Controlling Any 12V Device.
Includes 6 Waterproof Relays With Mounting Tabs For 1/4" Fastener.
Features
- 40/60 Amp Automotive Relay with 1/4" Leads
- Includes 6 Waterproof Relays with Mounting Tabs for 1/4 Fastener
- Features Negative Spike Suppression
- Can Be Used for Controlling Any 12V Device
- Standard Bosch Style Relay
- See more on Amazon...
Brand: Fastronix Solutions
Weight: 0.31 Pounds
See On Amazon #20
TWTADE/AC 110V 10A Coil Electromagnetic Power Relay 8 Pins 2DPT 2NO+2NC with Indicator Light and Socket Base -YJ2N-LY
Asin: B07C78PHS2 | Model: 03-IHKP-2BIF | PartNumber: 03-IHKP-2BIF | Ean: 0634759527787 | UPC: 634759527787
Relay Size: 2.6 X 2 X 3.5Cm / 1" X 0.8" X 1.4" (L*W*H); Socket Size: 7.7 X 2.4 X 2.7Cm /3.03" X 0.94" X 1" (L*W*H);Total Height: 6.5Cm / 2.5".
Package Content: 1 X Electromagnetic Relay + 1 X Socket + 1 X Base Hook.
Net Weight: 81G;Main Color: Black, Clear;Indicator Light: Ac Coil: Red Lamp,Dc Coil: Green Lamp;Indicator Light: It Can Be Seen Whether The Coil Is Energized..
Coil Voltage: Ac 110V;Contact Capacity: 10A 240Vac /28Vdc Type: Dpdt(2No 2Nc); Pin: 8 Pins;Mount Type: 35Mm Din Rail.
Features
- Product Name: Electromagnetic Relay;Model No. : YJ2N-LY;Socket Model No. : YJTF08A-E;Wiring description For example: 1,3,5 This contact, 3 and 5 are normally open, 1 and 5 are normally closed.
- Coil Voltage: AC 110V;Contact Capacity: 10A 240VAC /28VDC Type: DPDT(2NO 2NC); Pin: 8 Pins;Mount Type: 35mm DIN Rail
- Relay Size: 2.6 x 2 x 3.5cm / 1 x 0.8 x 1.4 (L*W*H); Socket Size: 7.7 x 2.4 x 2.7cm /3.03 x 0.94 x 1 (L*W*H);Total Height: 6.5cm / 2.5
- Net Weight: 81g;Main Color: Black, Clear;Indicator light: AC Coil: Red lamp,DC Coil: Green lamp;Indicator light: It can be seen whether the coil is energized.
- Package Content: 1 x Electromagnetic Relay + 1 x Socket + 1 x Base hook
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon
Looking For Something Else?
Search