LUTIFIX Exhaust Back Pressure Tester/Gauge, Automotive Replacement Exhaust Cat-Back Systems with 6-Foot Hose Automotive Back Pressure Tester
Asin: B0BDFD13DX | Model: LUTIFIX-MMT2118460 | PartNumber: LUTIFIX-MMT2118460 | Ean: 0793869153764 | UPC: 793869153764
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Scope Of Diagnosis Of Problems】The Exhaust Pressure Gauge Allows You To See If The Catalytic Converter Is Clogged Or The Muffler Is Clogged; The Back Pressure Gauge Helps You Diagnose The Problem So You Know What To Do Next..
【Easy To Use】Just Disconnect The Sensor Wire And Remove The Sensor. Install The Sensor Adapter. Then Push The End Of The Hose Onto The Adapter And Do A Pressure Test. Adapters With Exhaust Back Pressure Gauges Are M12 And M18. Start The Car, Read The Data, A 6Ft Hose With Gauge Tester Allows The User To Test From The Driver's Seat..
【Complete Accessories】Special 2.5" Gauge With Rubber Boot Has Two Multi-Colored Bands And Pressure Is Displayed In Psi And Bar. The Adapter Has M12 And M18 Threads, Allowing Technicians To Test Exhaust Gas Without Back Pressure Through The Adapter All Kinds Of Models Are Fully Equipped..
【Accurate Gauge】The Automotive Back Pressure Tester’S 2.5" Inch Gauge Has Easy-To-Read Psi And Bar Markings. 3 Colors Indicate Good Or Bad Status, And The Highly Visible Markings Greatly Help Users Read The Data Directly..
Features
- Professional Exhaust Diagnostic Tool Catalytic Converter Tester allows you to diagnose problem areas of exhaust system back pressure. Help you to diagnose problem areas in your exhaust system back pressure and then help you take next steps. The exhaust pressure tester is tested at idle and 2500rpm. Pressure should be less than 1.25psi at idle and less than 3psi at 2500rpm.
- Accurate Gauge The Automotive Back Pressure Tester s 2.5 inch gauge has easy-to-read psi and bar markings. 3 colors indicate good or bad status, and the highly visible markings greatly help users read the data directly.
- Scope of Diagnosis of Problems The exhaust pressure gauge allows you to see if the catalytic converter is clogged or the muffler is clogged; the back pressure gauge helps you diagnose the problem so you know what to do next.
- Complete Accessories Special 2.5 gauge with rubber boot has two multi-colored bands and pressure is displayed in psi and bar. The adapter has M12 and M18 threads, allowing technicians to test exhaust gas without back pressure through the adapter All kinds of models are fully equipped.
- Easy to use Just disconnect the sensor wire and remove the sensor. Install the sensor adapter. Then push the end of the hose onto the adapter and do a pressure test. Adapters with exhaust back pressure gauges are M12 and M18. Start the car, read the data, a 6ft hose with gauge tester allows the user to test from the driver's seat.
- See more on Amazon...
Brand: LUTIFIX | Manufacturer: LUTIFIX
Warranty: 1 YEAR
See On Amazon Similar To LUTIFIX Exhaust Back Pressure Tester
#1
CMTOOL Exhaust Back Pressure Tester with 6-Foot Hose, Exhaust Back Pressure Gauge Kit, Car Exhaust Pressure Tester, Automotive Exhaust Back Pressure Tester Kit with Adapter (M12&M18)
Asin: B09CCWDKR6 | Ean: 0758358922382 | UPC: 758358922382
3.【2 Pressure Units & 3 Color Bands】The Exhaust Pressure Tester Has 2 Pressure Units (Psi And Bar) And 3 Colors To Indicate Good Or Bad Status, Highly Visible Markings Greatly Help Users To Read The Data Directly. The Exhaust Pressure Gauge Is Tested At Idle And 2500Rpm. The Pressure Should Be Lower Than 1.25Psi At Idle, And Lower Than 3Psi At 2500Rpms..
5.【24-Hour Service And 3-Year Warranty】We Offer 24-Hour Friendly Customer Service And A 36-Month Free Warranty For This Exhaust Back Pressure Gauge Kit To Ensure Your Shopping Experience. If You Have Any Questions About This Exhaust Pressure Tester Tool, Please Feel Free To Contact Us!.
6.【Important Hint】The Gauge Has Been Checked And Calibrated To Ensure Accurate Test Results. If The Gauge Pointer Is Not In The Initial State "0", It May Be That The Gauge Has Been Impacted During Transportation. In This Case, You Can Disassemble The Cover And Adjust The Pointer To "0", Without Affecting The Test Results..
4.【High Temperature Resistant 6Ft Hose】The Hose Is Made Of Special Thickened Silicone Material, Which Is Not Only Wear-Resistant But Also High Temperature Resistant About 300°C, Fully Meeting Your Needs. The 6Ft Hose Allows The User To Test From The Driver's Seat, Making Your Repairs Easier And Saving You Time And Energy..
2.【2.5-Inch Hd Gauge & Rubber Vibration Cover】The Adapter For Exhaust Pressure Test Is M12 And M18 Thread, Also Comes With A 2.5 Inch Easy-To-Read Gauge. The Gauge Head Is Equipped With A Shockproof Rubber Protective Cover, Which Is Feels Comfortable, Drop-Resistant And Durable, And Long-Term Protection..
Features
- 1. Professional Exhaust Back Pressure Tester The diagnostic function of the back pressure tester can help you quickly and accurately determine the condition of the vehicle's exhaust system, which can prevent sluggish engine performance, reduced acceleration, and excessive heat. Whether you are an auto expert or a DIY mechanic, the exhaust back pressure tester kit can bring you a satisfying experience.
- 2. 2.5-Inch HD Gauge & Rubber Vibration Cover The adapter for exhaust pressure test is M12 and M18 thread, also comes with a 2.5 inch easy-to-read gauge. The gauge head is equipped with a shockproof rubber protective cover, which is feels comfortable, drop-resistant and durable, and long-term protection.
- 3. 2 Pressure Units & 3 Color Bands The exhaust pressure tester has 2 pressure units (PSI and Bar) and 3 colors to indicate good or bad status, highly visible markings greatly help users to read the data directly. The exhaust pressure gauge is tested at idle and 2500rpm. The pressure should be lower than 1.25psi at idle, and lower than 3psi at 2500rpms.
- 4. High Temperature Resistant 6ft Hose The hose is made of special thickened silicone material, which is not only wear-resistant but also high temperature resistant about 300 C, fully meeting your needs. The 6ft hose allows the user to test from the driver's seat, making your repairs easier and saving you time and energy.
- 5. 24-Hour Service and 3-Year Warranty We offer 24-hour friendly customer service and a 36-month free warranty for this exhaust back pressure gauge kit to ensure your shopping experience. If you have any questions about this exhaust pressure tester tool, please feel free to contact us!
- 6. Important Hint The gauge has been checked and calibrated to ensure accurate test results. If the gauge pointer is not in the initial state 0, it may be that the gauge has been impacted during transportation. In this case, you can disassemble the cover and adjust the pointer to 0, without affecting the test results.
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Dimensions: 2.80 x 12.95 x 5.16 inches | Weight: 1.30 Pounds
Warranty: 3 year
See On Amazon #2
DKwoeshg Automotive Exhaust Back Pressure Tester Gauge Kit
Asin: B0CQ1RY31W
Large 2.5" Dial With Dual Pressure Scales In Psi And Kg/Cm2.
Highly Accurate Exhaust Backpressure Readings.
Quickly Determine If You Need Exhaust Repairs Or Replacements.
Pinpoint Exhaust Restrictions Fast To Diagnose Issues.
Compatible With Any Gas Or Diesel Powered Vehicle.
41" Hose Reaches Even Rear Exhaust Ports With Ease.
Universal Fit - Includes 12Mm And 18Mm Adapters To Fit Most Domestic And Foreign Vehicles.
Features
- Instantly tests for clogged or blocked catalytic converters and mufflers
- Universal fit - includes 12mm and 18mm adapters to fit most domestic and foreign vehicles
- Large 2.5 dial with dual pressure scales in PSI and kg/cm2
- 41 hose reaches even rear exhaust ports with ease
- Pinpoint exhaust restrictions fast to diagnose issues
- Compatible with any gas or diesel powered vehicle
- Highly accurate exhaust backpressure readings
- Quickly determine if you need exhaust repairs or replacements
- See more on Amazon...
Brand: DKwoeshg | Manufacturer: NINGBO ZHENHAI TOPTOOL CO.,LTD.
Dimensions: 3.00 x 8.00 x 17.99 inches | Weight: 2.00 Pounds
See On Amazon #3
JRangelp Exhaust Back Pressure Tester Car Catalytic Converter Clog Tester Exhaust Back Pressure Gauge Kit Automotive Exhaust Back Pressure Tester Kit with 6-Foot Hose & Adapter (M12&M18) & Carry Box
Asin: B09PGJHZRG | Model: JR-MG074 | PartNumber: JR-MG074
✉2.5-Inch Pressure Gauge✉ With A 2.5'' Pressure Dial With Easy-To-Read Markings In Psi And Bar; Three Color-Free Color Bars Clearly Indicate Quality(Bad Or Good); High-Visibility Markings On The Gauge For Easy Reading. You Can Easily Read The Final Measurement Result..
✉Convenient To Carry✉ Come With A Tool Box, You Can Store All Accessories In This Box, Which Is Convenient For Carrying And Storage, So That The Accessories Will Not Be Lost..
✉High Efficiency✉ This Exhaust Pressure Tester Should Be Tested At Idle And 2500Rpm. Note That The Pressure Should Be Less Than 1.25Psi At Idle And Less Than 3Psi At 2500 Rpm..
✉Comprehensive Tool Set✉ Equipped With An Adapter, M12 And M18, You Can Connect The Exhaust Back Pressure Gauge To The Port Of The Exhaust System. In Addition, A 6Ft Hose With Gauge Tester Allows The User To Test From The Driver's Seat. Come With A Tool Box, You Can Store All Accessories In This Box, Which Is Convenient For Carrying And Storage, So That The Accessories Will Not Be Lost..
Features
- Professional Tool This exhaust back pressure gauge is a professional tool dedicated to diagnosing problem areas in exhaust system back pressure, you can use the exhaust gauge to understand the actual condition of your vehicle's exhaust system; prevent engine performance degradation.
- Comprehensive Tool Set Equipped with an adapter, M12 and M18, you can connect the exhaust back pressure gauge to the port of the exhaust system. In addition, a 6ft hose with gauge tester allows the user to test from the driver's seat. Come with a tool box, you can store all accessories in this box, which is convenient for carrying and storage, so that the accessories will not be lost.
- 2.5-INCH Pressure Gauge With a 2.5'' pressure dial with easy-to-read markings in PSI and bar; three color-free color bars clearly indicate quality(bad or good); high-visibility markings on the gauge for easy reading. You can easily read the final measurement result.
- High Efficiency This exhaust pressure tester should be tested at idle and 2500rpm. Note that the pressure should be less than 1.25psi at idle and less than 3psi at 2500 rpm.
- Convenient to Carry Come with a tool box, you can store all accessories in this box, which is convenient for carrying and storage, so that the accessories will not be lost.
- See more on Amazon...
Brand: JRangelp | Manufacturer: JRangelp
Dimensions: 7.80 x 2.30 x 11.80 inches | Weight: 1.76 Pounds
See On Amazon #4
ATP Engine Oil Pressure Test Kit 0-140 PSI Automotive Engine Compression Tester Kit Exhaust Back Pressure Tester Low Oil Warning Devices Gauge Fuel Pressure Test Kit for Cars ATVs Trucks Use
Asin: B07GH5WGX8 | Model: A0094 | PartNumber: A0094 | Ean: 0681385609233 | UPC: 681385609233
Great Function: The Engine Compression Tester Kit Is Used To Diagnose And Test The Engine Oil Pressure Value, To Check Whether It Is Normal, Test Oil Pump Pressure And Also Low Oil Warning Devices. The Measured Value Can Be Used To Judge The Operation Of Fuel System Components Such As Electric Gasoline Pump And Oil Pressure Regulator. With This Best In Class Oil Pressure Test Tools, You Can Get A Definite Pressure Value Well Without Relying On The Dashboard Light..
Storage Case: The Oil Pressure Tester Kit Is Packed In A Heavy-Duty Storage Case With Precision-Sized Compartments For Every Piece - Great For Storage And Transport While Lengthening The Life Of The Tool Set..
Universal Tool: The Fuel Pressure Test Kit Fitted With Quick Coupling Adaptors And 1200Mm Of Hose, Including 90 Degree Coupling Adaptor For Limited Access Applications. This Oil Pressure Test Tool Kit Contains A Wide Assortment Of Durable Adapters Designed To Fit Mot Import/Domestic Engines..
Specification: The Compression Tester Automotive Use 3" Big Dial With Clear Dual Scale Range 0 To 140 Psi And 0 To 10 Bar. Compare To A Large Range, This Oil Pressure Gauge Is Easy To Read About 1-2 Bar With A Short Range. There Are A Straight Quick Coupler And A Elbow One In The Case, You Can Choose It According To The Location Of The Engine Oil Pressure Test Port..
Features
- Premium Quality: The oil pressure gauge kit is made of high quality copper, rubber, ABS plastic, iron, and aluminum, and the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
- Specification: The compression tester automotive use 3 big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
- Great Function: The engine compression tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal, test oil pump pressure and also low oil warning devices. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. With this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light.
- Universal Tool: The fuel pressure test kit fitted with quick coupling adaptors and 1200mm of hose, including 90 degree coupling adaptor for limited access applications. This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines.
- Storage Case: The oil pressure tester kit is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
- See more on Amazon...
Brand: ATP | Manufacturer: ATP Technic
Dimensions: 2.01 x 12.99 x 9.84 inches | Weight: 0.00 pounds
See On Amazon #5
Auto Car Truck Wire Piercing Cord Voltage Circuit Tester DC 6V/12V/24V Hook Probe Test Light Pencil with Light Indicator 1pc
Asin: B07X7LW72T | Model: VKALTUL | PartNumber: VKALTUL | Ean: 0613464653103 | UPC: 613464653103
【Flexible And Efficient】The Hook Probe Test Light Pencil Is Made Of Plastic, Small In Size, Good Extensibility, Flexible And Convenient, Can Better Hold The Body, Efficient And Safe, And Flexible To Use And Carry.The Cable Of Hook Probe Is Spring Wire.It Increases Flexibility, Range, And Freedom When Testing..
【Indicator Light And Retractable Handle】This Electrical Tester Has An Indicator Light, Which Allows The User To Clearly Know The Result Of The Test.This Circuit Breaker Tester Is Equipped With A Retractable Handle, Which Is Mainly Used To Make The Probe Protrude From The Top Of The Hook To Test The On-Off Function..
【Convenient Operation】The Low Voltage Tester Is Easy To Operate, You Only Need To Directly Probe The Test Without Stripping, Without Disconnecting The Insulated Wires, And Can Be Operated With One Hand, Which Is Convenient And Fast, And Avoids The Dangers Of Traditional Detection Methods..
【Hook Probe Design】The Hook Circuit Tester Has A Unique Hook Probe Design. Just Gently Pull The Handle, You Can Use The Probe To Pierce The Insulation And Touch The Copper Wire. This Makes The Detection More Convenient And Faster..
Features
- Mainly Used VKALTUL car truck wire piercing cord voltage circuit tester is mainly used for low-voltage circuit fault detection and maintenance. The circuit tester range of this circuit tester is mainly low voltage of 6V 12V 24V. It is mainly used for testing of automotive circuits, not household circuits.
- Hook Probe Design The hook circuit tester has a unique hook probe design. Just gently pull the handle, you can use the probe to pierce the insulation and touch the copper wire. This makes the detection more convenient and faster.
- Flexible and Efficient The hook probe test Light pencil is made of plastic, small in size, good extensibility, flexible and convenient, can better hold the body, efficient and safe, and flexible to use and carry.The cable of hook probe is spring wire.It increases flexibility, range, and freedom when testing.
- Convenient Operation The low voltage tester is easy to operate, you only need to directly probe the test without stripping, without disconnecting the insulated wires, and can be operated with one hand, which is convenient and fast, and avoids the dangers of traditional detection methods.
- Indicator Light and Retractable Handle This electrical tester has an indicator light, which allows the user to clearly know the result of the test.This circuit breaker tester is equipped with a retractable handle, which is mainly used to make the probe protrude from the top of the hook to test the on-off function.
- See more on Amazon...
Brand: VKALTUL | Manufacturer: MRCARTOOL
See On Amazon #6
Fuel Injector Cleaner, C100 Automotive Non-dismantle Fuel Injector Cleaner Kit,1000ML 150PSI Fuel Injector Tester and Cleaner Fuel System Tool Set Machine for Petrol Cars
Asin: B071NJJS1C | Model: AUTOOL C100 | PartNumber: AUTOOL C100 | Ean: 0602860600224 | UPC: 602860600224
【Working Pressure Adjustment】The Non-Dismantle Cleaner Autool C100 Has A Special Handling One-Way Valves To Seal Up Gas And Durable Pressure Regulating Valves. Adjustable Pressure Gauge Up To 150Psi.The Fuel Injector Cleaner Tool Kit Is Equipped With A Cleaning Canister With A Capacity Of 1,000 Ml, Made Of High-Pressure, High-Quality Stainless Steel, Resistant To Corrosion And Abrasion..
【Storage And Note】The Fuel System Cleaner Kit Is Equipped With A Heavy Blow Molded Plastic Box,Which Can Protect Products For Easy Transportation.Note:This Automotive Fuel Injector Cleaning Kit Is Only Suitable For Gasoline Engines, Not For Diesel Fuel Injectors And This Kit Does Not Contain Any Cleaning Fluid..
【3 Years Warranty】For Damage Caused By Non-Human Factors,Autool Promise To Resend Parts For Free Within 3 Years. For Any Needs,You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【 Efi-Electrenic Fuel Injection System】There Two Types Of Electronic Fuel Injection System, Throttle Or Electronic Injection. One Engine With Fuel-Return Pipe, Another One Engine Without Fuel-Return Pipe.Throttle Model: The Way Of Connection Is The Same As Efi System, Just Adjust The Pressure Of The Air Source 1-5Psi..
【Multi -Adapter & Widely Application】The Fuel System Cleaner Tool Is Equipped With A Wide Range Of Adapters For Almost All Cars And Light Trucks In The Eu, Asia And The U.S.A. The Fuel Injector Cleaner Kit Is Of High Quality, The Main Parts And Fittings Are Made Of Brass, The Connecting Hose Is Made Of High-Quality Rubber Material, Which Is Tough, Corrosion-Resistant And Non-Leakage, And The Tubing Is Suitable For All Cleaning Fluids..
Features
- Upgraded Fuel Injector Cleaner Kit AUTOOL Fuel Injector Cleaner Kit with High and Low Pressure Cleaning Functions,It can non-disassembly cleaning of the fuel system. The Non-dismantle injector cleaning kit is suitable for cleaning fuel injectors, air intake system and three-way catalytic converter, which can quickly remove carbon deposits. This automotive injector cleaning kit is for gasoline engines only, not for diesel injectors.
- Multi -adapter & Widely application The fuel system cleaner tool is equipped with a wide range of adapters for almost all cars and light trucks in the EU, Asia and the U.S.A. The Fuel Injector Cleaner Kit is of high quality, the main parts and fittings are made of brass, the connecting hose is made of high-quality rubber material, which is tough, corrosion-resistant and non-leakage, and the tubing is suitable for all cleaning fluids.
- Working Pressure Adjustment The non-dismantle cleaner Autool C100 has a special handling one-way valves to seal up gas and durable pressure regulating valves. Adjustable pressure gauge up to 150PSI.The Fuel Injector Cleaner Tool Kit is equipped with a cleaning canister with a capacity of 1,000 ml, made of high-pressure, high-quality stainless steel, resistant to corrosion and abrasion.
- EFI-Electrenic Fuel Injection System There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI.
- Storage and Note The fuel system cleaner kit is equipped with a heavy blow molded plastic box,which can protect products for easy transportation.Note:This automotive fuel injector cleaning kit is only suitable for gasoline engines, not for diesel fuel injectors and this kit does not contain any cleaning fluid.
- 3 years Warranty For damage caused by non-human factors,AUTOOL promise to resend parts for free within 3 years. For any needs,you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
See On Amazon #7
Exhaust Back Pressure Tester,Exhaust Back Pressure Gauge,Fuel Pressure Test Kit
Asin: B09WTZRL8N | Model: 4759-XJPE | PartNumber: 4759-XJPE | Ean: 0728990661017 | UPC: 728990661017
【Back Pressure Gauge Exhaust With 6 Foot Hose】The 6-Foot Hose Allows Users To Test From The Driver's Seat, And The Exhaust Back Pressure Gauge Kit Makes Your Repairs Easier, Saving You Time And Energy.In Addition,Equipped With A Hose Clamp，It Can Help You Tighten The Interface, Not Leaking, To Ensure The Accuracy Of The Measurement..
【Quality Assurance & Excellent Service】Vkaltul’S Products Have Been Professionally Tested, Please Buy It With Confidence! If You Have Any Questions During The Purchase And Use, Please Feel Free To Contact Us, We Will Reply You Within 24 Hours..
【Fuel Pressure Test Kit With Adapter】Equipped With An Adapter, M12 And M18, You Can Connect The Exhaust Back Pressure Gauge To The Port Of The Exhaust System. This Exhaust Pressure Tester Should Be Tested At Idle And 2500Rpm. Note That The Pressure Should Be Less Than 1.25Psi At Idle And Less Than 3Psi At 2500 Rpm..
【2.5-Inch Pressure Gauge】The Back Pressure Tester Has A 2.5-Inch Gauge With Easy-To-Read Markings In Psi And Bar; Three Color-Free Color Bars Clearly Indicate Good Or Bad Status; High-Visibility Markings On The Gauge For Easy Reading. You Can Easily Read The Final Test Result.The Gauge Head Is Equipped With A Rubber Sheath To Prevent Damage..
Features
- Professional Test Tool The exhaust back pressure has an important influence on the power, economy and emission performance of the engine. The increase of exhaust back pressure will lead to the decrease of fuel combustion efficiency, economy, power and emission.The exhaust back pressure tester is a special tool for testing the exhaust back pressure of the engine.It helps you quickly and accurately determine the condition of the vehicle's exhaust system.
- 2.5-Inch Pressure Gauge The back pressure tester has a 2.5-inch gauge with easy-to-read markings in PSI and bar; three color-free color bars clearly indicate good or bad status; high-visibility markings on the gauge for easy reading. You can easily read the final test result.The gauge head is equipped with a rubber sheath to prevent damage.
- Back Pressure Gauge Exhaust with 6 Foot Hose The 6-foot hose allows users to test from the driver's seat, and the exhaust back pressure gauge kit makes your repairs easier, saving you time and energy.In addition,equipped with a hose clamp it can help you tighten the interface, not leaking, to ensure the accuracy of the measurement.
- Fuel Pressure Test Kit with Adapter Equipped with an adapter, M12 and M18, you can connect the exhaust back pressure gauge to the port of the exhaust system. This exhaust pressure tester should be tested at idle and 2500rpm. Note that the pressure should be less than 1.25psi at idle and less than 3psi at 2500 rpm.
- Quality Assurance & Excellent Service VKALTUL s products have been professionally tested, please buy it with confidence! If you have any questions during the purchase and use, please feel free to contact us, we will reply you within 24 hours.
- See more on Amazon...
Brand: VKALTUL | Manufacturer: VKALTUL
Dimensions: 2.36 x 7.87 x 3.94 inches
See On Amazon #8
OEMTOOLS 37263 Exhaust Back Pressure Tester Gauge, Catalytic Converter Test Kit, Exhaust Pressure Tester
Asin: B08XW1D7DC | Model: 37263 | PartNumber: 37263 | Ean: 0076812372635 | UPC: 076812372635
Accurate Gauge: The Exhaust Backpressure Tester's 2-1/2 Inch Gauge Has Easy-To-Read Markings In Psi And Bar; Multi-Color Bar Indicates Good Or Bad Status; Gauge Has High Visibility Markings For Easier Reading.
Transportable: The Back Pressure Test Tool Comes In A Sturdy And Solid Carrying Case For Easy Transportation; Exhaust Back Pressure Gauge's Case Is Perfect For The Mechanic On The Go; Case Protects From Damage.
Diagnose Probnlem Areas: The Exhaust Pressure Gauge Allows You To See If You Have A Clogged Catalytic Converter Or An Obstructed Muffler; Back Pressure Gauge Helps You Diagnose Problems So You Know The Next Steps To Take.
Easy To Use: The Exhaust Back Pressure Kit Connects To Exhaust System’S Oxygen Sensor; Oxygen Sensor Adapters With Exhaust Back Pressure Gauge Are M12 And M18; 6 Foot Hose With Pressure Gauge Tester Allows Users To Test From Driver’S Seat.
Features
- Safety First: The catalytic converter tester allows you diagnose problem areas in your exhaust system s back pressure; Get crucial knowledge of your vehicle s exhaust system with exhaust gauge; Prevents bad engine performance
- Easy To Use: The exhaust back pressure kit connects to exhaust system s oxygen sensor; Oxygen sensor adapters with exhaust back pressure gauge are M12 and M18; 6 foot hose with pressure gauge tester allows users to test from driver s seat
- Accurate Gauge: The exhaust backpressure tester's 2-1/2 inch gauge has easy-to-read markings in PSI and bar; Multi-color bar indicates good or bad status; Gauge has high visibility markings for easier reading
- Diagnose Probnlem Areas: The exhaust pressure gauge allows you to see if you have a clogged catalytic converter or an obstructed muffler; Back pressure gauge helps you diagnose problems so you know the next steps to take
- Transportable: The back pressure test tool comes in a sturdy and solid carrying case for easy transportation; Exhaust back pressure gauge's case is perfect for the mechanic on the go; Case protects from damage
- See more on Amazon...
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 2.13 x 10.00 x 9.00 inches | Weight: 1.70 Pounds
Warranty: Limited Lifetime
See On Amazon #9
DPTOOL Vacuum Gauge Tester Multifunction Fuel Pump Catalytic Converter Muffler Carburetor Exhaust Back Pressure Tester Digital Display Gauge with Adapters and Hose
Asin: B09N941LQ9
Check Manifold Vacuum: Use This Vacuum Gauge Measure The Manifold Vacuum Pressure, Helped You Troubleshoot The System And Find The Failed Component. Start The Engine And Warm Up The Engine Temperature To Between 75-85 Degrees, Turn Off The Engine, Connect Vacuum Gauge, Started Let The Engine Run In Idling Conditions, And Ensure The Speed Is Around 850R/Min, If Guage Read Less Than 53Kpa, Indicates That The System Has A Leak.
Complete Kit: This Kit Have 7Pc Different Brass Cone, And 4Pc Different Plastic Cone, And 2Pc Different Adapters, So You Can Connect Different Part, Make This Vacuum Gauge Multifunction, The Hose 48 Inches, All The Tools Put In A Plastic Case, Easy To Storage.
Digital Display Gauge: Our Vacuum Gauge Is Digital Display, The Unit Is Kpa And Mbar, You Can Switch Between Two Units, Digital Dial Will More Direct And Accurate Show Pressure Than Needle, And Rubber Cover Protect In Sueface, This Tool Not Come With Battery.
Check Fuel Pump Pressure: This Vacuum Gauge Could Checking Fuel Pump Delivery Pressure, Only Mechanical Fuel Pump Systems, Not To Be Used To Check Fuel Pressure On Electric Fuel Pump Systems, Verify Fuel Mixture Settings Were Correct, Found The Vacuum Leaks, Tuned The Carb, Got A Good Idle Speed.
Features
- Exhaust Back Pressure Test: This gauge easy to to test pre and post catalytic converter back pressures, check exhaust for clearance issues, helps identify restricted exhaust and melted cat converters. no guessing about plugged exhaust.Removed O2 sensor and screw gauge and adapter into sensor hole. Started truck, accelerate the engine to 2500r/min, if gauge read less than13.8 Kpa pressure, showing no blockage.if greater than 13.8 Kpa, means have blockage
- Check Fuel Pump Pressure: This vacuum gauge could checking fuel pump delivery pressure, only mechanical fuel pump systems, not to be used to check fuel pressure on electric fuel pump systems, verify fuel mixture settings were correct, found the vacuum leaks, tuned the carb, got a good idle speed
- Check Manifold Vacuum: Use this vacuum gauge measure the manifold vacuum pressure, helped you troubleshoot the system and find the failed component. Start the engine and warm up the engine temperature to between 75-85 degrees, turn off the engine, connect vacuum gauge, Started let the engine run in idling conditions, and ensure the speed is around 850r/min, if guage read less than 53Kpa, indicates that the system has a leak
- Digital Display Gauge: Our vacuum gauge is digital display, the unit is Kpa and mbar, you can switch between two units, digital dial will more direct and accurate show pressure than needle, and rubber cover protect in sueface, this tool not come with battery
- Complete Kit: This kit have 7pc different brass cone, and 4pc different plastic cone, and 2pc different adapters, so you can connect different part, make this vacuum gauge multifunction, the hose 48 inches, all the tools put in a plastic case, easy to storage
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Dimensions: 2.17 x 9.65 x 8.07 Inches | Weight: 1.41 pounds
See On Amazon #10
Exhaust Back Pressure Tester 2.5" HD Pressure Gauge Exhaust Back Pressure Gauge Kit with 6ft Hose Oil Pressure Gauge Shockproof Rubber Cover Exhaust Pressure Gauge,Car Exhaust Pressure Tester
Asin: B0CGCCQ2HS | Model: PQBY927 | PartNumber: PQBY927 | Ean: 0728990665848 | UPC: 728990665848
【Hd Dual Scale Pressure Gauge & Shockproof Rubber Cover】Equipped With A 2.5" Hd Pressure Gauge Designed With High Visibility Psi/Bar Pressure Units To Help Users Read Test Data Quickly And Accurately.In Addition,The Multi-Coloured Bars Are Designed To Help You Quickly Determine If There Is A Problem With The Exhaust System (Green Is A Good Condition,Red Is A Bad Condition) The Gauge Head Is Equipped With An Anti-Vibration Rubber Protective Cover For Real-Time Protection,Reducing Crash Damage..
【3 Years Warranty&Warm Tips】Instrument Is Provided With 3 Years Free Warranty,If You Have Any Questions During The Use,Please Feel Free To Contact Us,We Will Definitely Reply You In Time.To Ensure Accurate Test Results,The Pressure Gauge Has Been Checked And Calibrated.If The Pressure Gauge Pointer Is Not At The Initial State "0",It May Have Been Affected During Transportation.You Can Manually Remove The Cover And Adjust The Pointer To "0",This Will Not Affect The Accuracy Of The Test Results..
【6Ft Abrasion/Heat Resistant Hose & M12 And M18 Thread Adapters】Exhaust Back Pressure Tester Hose Length Is Made Of High Quality Silicone Material With Good Abrasion And High Temperature Resistance (≤300°C) And The 6Ft Hose Length Allows The User To Test Directly From The Driver's Seat, Making It Easy And Fast.In Addition,Complete With M12 And M18 Thread Adapters,You Can Connect The Exhaust Pressure Gauge Tester To The Exhaust System Port..
【Simple And Practical Exhaust Back Pressure Gauge Kit】Exhaust Pressure Tester Is Tested At Idle Speed And 2500 Rpm.At Idle,Read The Lower Scale On The Gauge.It Should Not Over 1.25Psi (0.09Bar),Or Be In The Red Zone.If It Is,Stop The Engine And Find The Location Of The Blockage And Repair And Unblock It.If The Reading At Idle Is Not Red Zone On The Lower Scale,Rev-Up The Engine To 2500 Rpm.If The Reading Is In Red Zone 3Psi,(.21Bar) There Is Is A Blockage In The Exhaust System..
Features
- Professional Diagnosis of Exhaust Blockage Fault Exhaust back pressure gauge tester is designed to diagnose where back pressure problems in the exhaust system lie,easily helping you diagnose whether your converter or muffler is clogged,preventing engine sluggish performance,reduced acceleration and overheating,providing you with a smooth and safe drive.Exhaust back pressure tester provides an effective way for car experts,car dealers or DIY mechanics to determine faults accurately and quickly.
- Simple And Practical Exhaust Back Pressure Gauge Kit Exhaust pressure tester is tested at idle speed and 2500 rpm.At idle,read the lower scale on the gauge.It should not over 1.25PSI (0.09bar),or be in the red zone.If it is,stop the engine and find the location of the blockage and repair and unblock it.If the reading at idle is not red zone on the lower scale,rev-up the engine to 2500 RPM.If the reading is in red zone 3PSI,(.21bar) there is is a blockage in the exhaust system.
- HD Dual Scale Pressure Gauge & Shockproof rubber Cover Equipped with a 2.5 HD pressure gauge designed with high visibility PSI/Bar pressure units to help users read test data quickly and accurately.In addition,the multi-coloured bars are designed to help you quickly determine if there is a problem with the exhaust system (green is a good condition,red is a bad condition) The gauge head is equipped with an anti-vibration rubber protective cover for real-time protection,reducing crash damage.
- 6ft abrasion/heat resistant hose & M12 and M18 thread adapters Exhaust back pressure tester hose length is made of high quality silicone material with good abrasion and high temperature resistance ( 300 C) and the 6ft hose length allows the user to test directly from the driver's seat, making it easy and fast.In addition,complete with M12 and M18 thread adapters,you can connect the exhaust pressure gauge tester to the exhaust system port.
- 3 years warranty&Warm Tips Instrument is provided with 3 years free warranty,if you have any questions during the use,please feel free to contact us,we will definitely reply you in time.To ensure accurate test results,the pressure gauge has been checked and calibrated.If the pressure gauge pointer is not at the initial state 0,it may have been affected during transportation.You can manually remove the cover and adjust the pointer to 0,this will not affect the accuracy of the test results.
- See more on Amazon...
Brand: DUOYI | Manufacturer: DUOYI
Warranty: 2 years
See On Amazon #11
Exhaust Back Pressure Tester - Angchun Exhaust Back Pressure Gauge with 6FT Hose 2.5" Gauge and Rubber Protector Two Multi-Colored Bands Catalytic Converter Test Kit with Adapter (M12 & M18)
Asin: B0CD2M51S6 | Model: fpt-01 | PartNumber: fpt-01
👍👍👍【Easy To Use】Just Disconnect The Sensor Wires And Remove The Sensor. Install The Sensor Adapter. And Then Push The Hose End Onto The Adapter And Make The Pressure Test. The Adapter With Exhaust Back Pressure Gauge Are M12 And M18. Start Car, Read Data, 6Ft Hose With Gauge Tester Allows User To Test From Driver Seat..
👍👍👍【Warmly Reminder】The Pressure Gauge Is Checked And Calibrated To Ensure Accurate Test Results. If The Meter Pointer Is Not In The Initial State "0", The Meter May Have Been Affected During Transportation. You Can Remove The Case And Adjust The Pointer To "0", This Will Not Affect The Test Results..
👍👍👍【Complete Accessories】The Special 2.5" Gauge With Rubber Protector Has Two Multi-Colored Bands, With Pressure Shown In Psi And Bar. And The Adapter Has M12 And M18 Threads, Allowing The Technician To Test The Exhaust Gas Without Back Pressure Through The Adapter. Fully Equipped For A Variety Of Models..
👍👍👍【Accurate Gauge】The Exhaust Back Pressure Tester's 2.5" Inch Gauge Has Easy-To-Read Markings In Psi And Bar. 3 Colors To Indicate The Good Or Bad Status, The Highly Visible Mark Greatly Helps Users To Directly Read The Data. The Exhaust Pressure Tester Is Tested At Idle And 2500Rpm. Pressure Should Be Less Than 1.25Psi At Idle And Less Than 3Psi At 2500Rpm..
Features
- Professional Diagnostic Tool The catalytic converter tester is designed to help you quickly and accurately understand the condition of your vehicle's exhaust system, allowing you to diagnose problem areas in your exhaust system back pressure so you can take your next steps. Use this exhaust gauge to gain vital knowledge about your vehicle's exhaust system and prevent poor engine performance.
- Accurate Gauge The exhaust back pressure tester's 2.5 inch gauge has easy-to-read markings in psi and bar. 3 colors to indicate the good or bad status, the highly visible mark greatly helps users to directly read the data. The exhaust pressure tester is tested at idle and 2500rpm. Pressure should be less than 1.25psi at idle and less than 3psi at 2500rpm.
- Easy to Use Just disconnect the sensor wires and remove the sensor. Install the sensor adapter. And then push the hose end onto the adapter and make the pressure test. The adapter with exhaust back pressure gauge are M12 and M18. Start car, read data, 6ft hose with gauge tester allows user to test from driver seat.
- Complete Accessories The special 2.5 gauge with rubber protector has two multi-colored bands, with pressure shown in psi and bar. And the adapter has M12 and M18 threads, allowing the technician to test the exhaust gas without back pressure through the adapter. Fully equipped for a variety of models.
- Warmly Reminder The pressure gauge is checked and calibrated to ensure accurate test results. If the meter pointer is not in the initial state 0, the meter may have been affected during transportation. You can remove the case and adjust the pointer to 0, this will not affect the test results.
- See more on Amazon...
Brand: Angchun | Manufacturer: Angchun
Dimensions: 2.00 x 10.00 x 12.00 inches | Weight: 2.00 pounds
Warranty: 1 year
See On Amazon #12
Star Products STATU24APB Three Way Exhaust Back Pressure Kit, One Size
Asin: B000I19F2K | Model: STATU24APB | PartNumber: STATU24APB | Ean: 0763279024008 | UPC: 763279024008
Furnished With Rubber Boot To Protect Gauge.
Hose Is 6', Enough Length For The Technician To Test From The Driver's Seat.
The 2-1/4" Special Gauge Has Two Multicolored Bands For Measuring At Idle And 2500 Rpm; The Scale Ranges Are In Psi And Bar.
Features
- Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc.
- The 2-1/4 special gauge has two multicolored bands for measuring at Idle and 2500 RPM; the scale ranges are in PSI and BAR
- Furnished with rubber boot to protect gauge
- Hose is 6', enough length for the Technician to test from the driver's seat
- See more on Amazon...
Brand: Star Products | Manufacturer: Star Products
Dimensions: 2.30 x 11.80 x 8.00 inches | Weight: 2.60 Pounds
Warranty: Repair Only
See On Amazon #13
LINXINO Exhaust Back Pressure Tester, Automotive Exhaust Back Pressure Gauge Kit with 6ft Hose & Adapter M12/M18, Fuel Pressure Test Kit, Car Exhaust Pressure Tester
Asin: B09FXL2FNF | Model: M822 | PartNumber: M822
【Easy To Use】The Exhaust Back Pressure Tester Is Equipped With A 6-Foot Hose, Allowing Users To Test On The Driver's Seat.The Adapter For Exhaust Pressure Gauge Kit Is M12 And M18 Thread. The Pressure Shall Be Less Than 1.25 Psi At Idle Speed And Less Than 3 Psi At 2500 Rpm..
【24-Hour Service】The Exhaust Back Pressure Test Kit Has Been Professionally Tested. Please Feel Free To Purchase It! Your Satisfaction Is Very Important To Us. If You Have Any Questions, Please Contact Us, And We Will Reply You Within 24 Hours..
【High Quality】The Meter Head Of The Exhaust Back Pressure Tester Is Equipped With A Rubber Sheath To Prevent Damage And Facilitate Carrying. Equipped With Hose Clamp To Help You Tighten The Interface To Ensure The Accuracy Of Measurement..
【Precise Reading】The Dial Size Of The Exhaust Back Pressure Tester Is 2.5 Inches. It Has Two Pressure Units, Psi And Bar. Three Colors Indicate The Status. The Visible Mark Of The Exhaust Back Pressure Test Height Greatly Helps The User To Read The Data Directly..
Features
- PROFESSIONAL DIAGNOSTIC TOOL The exhaust back pressure tester is a special tool for testing the exhaust back pressure of the engine, which helps you quickly and accurately understand the condition of the vehicle's exhaust system so that you can take the next step.
- PRECISE READING The dial size of the exhaust back pressure tester is 2.5 inches. It has two pressure units, PSI and bar. Three colors indicate the status. The visible mark of the exhaust back pressure test height greatly helps the user to read the data directly.
- EASY TO USE The exhaust back pressure tester is equipped with a 6-foot hose, allowing users to test on the driver's seat.The adapter for exhaust pressure gauge kit is M12 and M18 thread. The pressure shall be less than 1.25 psi at idle speed and less than 3 psi at 2500 rpm.
- HIGH QUALITY The meter head of the exhaust back pressure tester is equipped with a rubber sheath to prevent damage and facilitate carrying. Equipped with hose clamp to help you tighten the interface to ensure the accuracy of measurement.
- 24-HOUR SERVICE The exhaust back pressure test kit has been professionally tested. Please feel free to purchase it! Your satisfaction is very important to us. If you have any questions, please contact us, and we will reply you within 24 hours.
- See more on Amazon...
Brand: LINXINO | Manufacturer: LINXINO
Dimensions: 3.94 x 7.87 x 2.36 inches
Warranty: If you have any question please contact us, we will reply within 24 hours.
See On Amazon #14
Scicalife Exhaust Back Pressure Tester Gauge Catalytic Converter Test Kit Exhaust Pressure Tester Automobile Emission Detector
Asin: B09S6JMRW9 | Model: PP12510176Y63VH | PartNumber: PP12510176Y63VH | Ean: 3691807812261
Reasonable Structure, Simple Operation, Convenient Application, Can Help You Test Quickly And Accurately..
Fine Workmanship, Excellent Texture, Simple And Practical, It Can Test The Front Pressure Of The Catalytic Converter To Determine Whether The Exhaust Is Blocked..
Fast And Accurate, Time- Saving, Precise And Efficient, It Will Be Your Best Choice For Testing Tools..
This Is A Very Professional And Durable Automotive Exhaust Back Pressure Tester Suitable For Most Vehicle Applications On The Market..
Features
- The tester can complete your test work well and help you better understand your car information.
- This is a very professional and durable automotive exhaust back pressure tester suitable for most vehicle applications on the market.
- Reasonable structure, simple operation, convenient application, can help you test quickly and accurately.
- Fast and accurate, time- saving, precise and efficient, it will be your best choice for testing tools.
- Fine workmanship, excellent texture, simple and practical, it can test the front pressure of the catalytic converter to determine whether the exhaust is blocked.
- See more on Amazon...
Brand: Scicalife | Manufacturer: Scicalife
Dimensions: 1.18 x 23.62 x 2.36 inches
See On Amazon #15
OTC 7215 Exhaust Back Pressure Gauge
Asin: B0002SQWVQ | Model: 7215 | PartNumber: 7215 | Ean: 0731413010286 | UPC: 731413010286
Specially Designed Tip Provides More Accurate Pressure Reading While Stainless Steel Braided Tube Withstands High-Heat Engine Conditions.
For Use On Gm, Ford, Chrysler And Imported Vehicles.
A Universal Adapter Is Also Included For Vehicles With Thermactor Systems.
Large, Easy-To-Read Gauge Clearly Shows Pressure From 0-8 Psi.
Features
- Simply insert the 7215 into the oxygen sensor hole
- Large, easy-to-read gauge clearly shows pressure from 0-8 PSI
- Specially designed tip provides more accurate pressure reading while stainless steel braided tube withstands high-heat engine conditions
- A universal adapter is also included for vehicles with thermactor systems
- For use on GM, Ford, Chrysler and imported vehicles
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.80 x 4.60 x 3.30 inches | Weight: 1.01 Pounds
Warranty: Limited lifetime warranty
See On Amazon #16
Zcargel Exhaust Back Pressure Tester, Exhaust Tester Three Way Catalytic Converter Test Kit Pressure Tester Tool for All Cars
Asin: B09BFQ54XP
Brand: Zcargel
See On Amazon #17
Tool Aid 33600 Exhaust Back Pressure Tester
Asin: B0002SQW9S | Model: 33600 | PartNumber: 33600 | Ean: 7241870724983, 0028893727910, 0638570336009, 0641125344114, 0785533890136, 0956260483513 | UPC: 638570336009, 956260483513, 785533890136, 641125344114, 028893727910
Item Package Weight:0.544 Kg.
Item Package Quantity:1.
Item Package Dimension:4.318 Cm L X 14.478 Cm W X 41.91 Cm H.
Features
- Product Type:Tools
- Item Package Dimension:4.318 cm L X 14.478 cm W X 41.91 cm H
- Item Package Weight:0.544 kg
- Item Package Quantity:1
- See more on Amazon...
Brand: Tool Aid | Manufacturer: Tool Aid
Dimensions: 1.63 x 16.88 x 5.75 Inches | Weight: 1.20 pounds
See On Amazon #18
Replacement Car Exhaust Back Pressure Tester Gauge Meter DiagnosticTool Catalytic Converter Clog Test Gauge Kit
Asin: B08QZC2LDM | Ean: 0750081930450 | UPC: 750081930450
Gauge Adapter Threads Into Oxygen Sensor Ports (Both 12Mm And 18Mm). Test At Idle And At2500 Rpm's. Pressure Should Be Below 1.25Psi At Idle And Below 3Psi At 2500Rpms..
Package Including 1 Set Of Car Exhaust System Back Pressure.
Higher Readings Indicate A Restriction Which Should Be Corrected..
Adaptor Fits Into Oxygen Sensor Hole Enabling Back Pressure Of Mufflers And Catalytic Converters.
Features
- Car Exhaust System Back Pressure Tester Meter Diagnostic Tool Exhaust System Diagnostic Tool Exhaust Back Pressure Tester
- Adaptor fits into oxygen sensor hole enabling back pressure of mufflers and catalytic converters
- Gauge adapter threads into oxygen sensor ports (both 12mm and 18mm). Test at idle and at2500 rpm's. Pressure should be below 1.25psi at idle and below 3psi at 2500rpms.
- Higher readings indicate a restriction which should be corrected.
- Package including 1 SET OF Car Exhaust System Back Pressure
- See more on Amazon...
Brand: Stone-tech | Manufacturer: Stone-tech
See On Amazon #19
Tool Aid (TA 33600) Exhaust Back Pressure Tester
Asin: B07CSDRR54 | Model: 33600 | PartNumber: 33600 | Ean: 0638570336009 | UPC: 638570336009
Brand: Tool Aid | Manufacturer: SG Tool Aid
Dimensions: 1.70 x 16.90 x 5.80 inches | Weight: 1.20 Pounds
See On Amazon
Looking For Something Else?
Search