ENOMAKER PEI Spring Steel Magnetic Double Sided Bed Sheet Smooth and Textured Platform Removable Flexible Bed Sticker Build Surface for for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X,310x320mm
Asin: B0BDLF4XZQ | Model: ENO-Dual-PEI-310x320 | PartNumber: ENO-Dual-PEI-310x320 | Ean: 0764481225627 | UPC: 764481225627
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture + Smooth Pei Sheet】One Side Frosted, One Side Smooth, Two Kinds Of Surface To Meet Your Different Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR-10 V3/CR-10S Pro & V2/Ender 3 Max/CR-X etc.
- Double Sided Texture + Smooth PEI Sheet One side frosted, one side smooth, two kinds of surface to meet your different printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon Similar To ENOMAKER PEI Spring Steel Magnetic
#1
Comgrow PEI Sheet Magnetic Flexible Heated Bed, PEI Spring Steel 235x235mm for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/3 Neo/Ender 3 S1/3 S1 Pro
Asin: B07XBM24HN | Ean: 6973298330422
Easy Model Removal-The Pei Spring Steel 235X235 Is Easy To Adhere To The Printing Surface, Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Wide Application - The Pei Sheet 235X235 Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3V2/ Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High Ressistance-Our Ender 3 Pei Build Plate Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
All New Functionality - The Flexible Surface Of The Ender 3 Pro Pei Bed Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models.No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
Features
- WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.
- ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.
- EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.
- HIGH RESSISTANCE-Our Ender 3 PEI build plate is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- WIDE APPLICATION - The PEI sheet 235x235 is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Anycubic Kobra/Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.79 x 7.87 x 7.87 inches
See On Amazon #2
Double-Sided Textured PEI Sheet 3D Printer Bed 235mm*235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1-Pro/Ender 5-Pro/Ender 3 V3 KE/SE
Asin: B0C2D5NDX8 | Model: 1 | PartNumber: 1 | Ean: 0795847035253 | UPC: 795847035253
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 9.25 x 9.25 x 0.08 inches | Weight: 1.06 Pounds
See On Amazon #3
Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
Asin: B092ZVTJSK | Model: 001 | PartNumber: 001 | Ean: 0752004396282 | UPC: 752004396282
【Wide Application】The Pei Printing Surface Can Compatible With Pla, Petg, Peek, Abs And Any Other Filaments. Perfect Printing Size Works Well With Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To Be Compatible With Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ke Ender 3 V3 K1 K1c, Please Remove The Two Positioning Screws On The Hotbed First.).
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" To Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Simple Installation】Just Need To Place The Bottom 3M Adhesive Surface On Top Of The No-Heated Bed. The Steel Pei Plate Can Be Magnetically Bonded To The Magnetic Sticker. If It Fails To Adsorb, Please Rotate It 90 Degrees And Try Again..
【Easy Adhere And Remove】 Easy To Adhere The Filaments To The Printing Bed. No Need For Tape And Glue Which Release Your Printing Anxiety. Easy To Remove The Prints Just Take Out The Pei Sheet And Slightly Flex It Repeatedly To Pop Your Prints Right Off..
Features
- Quality security Creality 100% official, made of high-quality spring steel, the flexible Steel PEI Sheet won't kink or warp when flex. It can stick well to the magnetic base, can resistant to 200 C and high strength no deformation. The soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Easy Adhere And Remove Easy to adhere the filaments to the printing bed. No need for tape and glue which release your printing anxiety. Easy to remove the prints just take out the PEI sheet and slightly flex it repeatedly to pop your prints right off.
- Wide Application The PEI Printing Surface can compatible with PLA, PETG, PEEK, ABS and any other filaments. Perfect printing size works well with Creality Ender 3/ Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro. (To be compatible with Ender-3 S1/Ender-3 S1 Pro/Ender-5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/KE Ender 3 V3 K1 K1C, please remove the two positioning screws on the hotbed first.)
- Simple Installation Just need to place the bottom 3M adhesive surface on top of the no-heated bed. The steel PEI plate can be magnetically bonded to the magnetic sticker. If it fails to adsorb, please rotate it 90 degrees and try again.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question to find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #4
PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro/Voxelab Aquila 3D Printer
Asin: B0BRCRX6T9 | Model: PEI-1230 | PartNumber: PEI-1230 | Ean: 0783970029096 | UPC: 783970029096
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【More Affordable And Practical】 We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. This Means A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of 120°C，Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
【Easy Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
- Easy Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- More Affordable and Practical We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 12/30/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 8.27 x 8.27 x 4.33 inches
Warranty: 2 years
See On Amazon #5
Creality Ender 3 S1 Original Print Platform Kit Magnetic Flexible Removable Spring Steel Texture Surface Print Build Plate Sheet for Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1 Pro/Ender 3 V3 SE 235x235mm
Asin: B0B297V4Z5 | Model: 3D-AC-3S1-Bed | PartNumber: 3D-AC-3S1-Bed
✨【Great Adhesion】Print Molds Onto Pc Build Plate Frosted Texture Surface Directly. No Tape, No More Glue, Release Your Printing Anxiety..
👑【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🎁【Easy Take Mold】Easy To Remove The Prints Just Take Out The Build Plate Surface And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
🎈【Wide Application】Compatible With Pla/ Petg/ Peek/ Abs And Any Other Filaments. 235*235Mm Spring Steel Sheet 3D Printer Bed Works Well With Ender 3/Ender 3 Neo/ Ender 3 S1/ Ender 3 S1 Pro/ Ender 3 V2/ Ender 3 V2 Neo/ Ender 5/ Ender 5 S1/ Ender 3 V3 Se/Ender 3 V3 Ke/Cr 10 Se K1/K1c And Other Same Sized Beds..
Features
- Quality Assurance Made of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The Soft Magnetic Sticker can withstand a long time of work with the heated bed at a high temperature of 70 C.
- Wide Application Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 235*235mm spring steel sheet 3d printer bed works well with Ender 3/Ender 3 Neo/ Ender 3 S1/ Ender 3 S1 Pro/ Ender 3 V2/ Ender 3 V2 Neo/ Ender 5/ Ender 5 S1/ Ender 3 V3 SE/Ender 3 V3 KE/CR 10 SE K1/K1C and other same sized beds.
- Great Adhesion Print molds onto PC build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.
- Easy Take Mold Easy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
ENOMAKER Magnetic PEI Bed Plate for Bambu Lab P1P P1S X1 Carbon 3D Printer Spring Steel Flex Sheet Upgrade Double Sided Smooth/Textured Hotbed Sticker Removable Build Surface Platform Mat 257x257mm
Asin: B0BYSQ3FCL | Ean: 0764481226020 | UPC: 764481226020
【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture + Smooth Pei Sheet】One Side Frosted, One Side Smooth, Two Kinds Of Surface To Meet Your Different Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Bambu Lab P1P, P1S, X1 Carbon, X1 Carbon Combo.
- Double Sided Texture + Smooth PEI Sheet One side frosted, one side smooth, two kinds of surface to meet your different printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #7
Creality Official Double Sided PEI Sheet and Magnetic Sticker 235*235mm, Golden PEI Smooth + Textured Spring Flexible Build Plate for 3D Printer Ender-3/3 S1/3 S1 Pro/5S1 Ender-3 Neo/3 V2 Neo/3 V3 SE
Asin: B0BCGFLJHD | Model: 3D-Double-PEI-G | PartNumber: 3D-Double-PEI-G
【More Stable Molding】The High-Strength Spring Steel Plate Is Only 0.4Mm Thick, And The Strong Magnetic Stickers Can Maintain High Magnetic Properties Under High Temperature, Which Reduces The Inertia Of The Platform Movement During Printing And Help The 3D Printer Run Smoothly..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Easy To Remove】With A Magnetic Printing Pei Sheet Plate, You Only Need To Remove It From The Bed And Bend It, Then The Model Can Be Removed. When You Let Go, They Just Return Back To Shape And Will Not Break Easily. No Need To Scratch, Pry And Damage Your Prints!.
【Double Sided】Two Different Build Surfaces Meet Different Printing Needs. One Side Is Pel Film With Smooth Surface, And Has A Good Effect On The Model Bottom Surface; Another Side Is The Golden Textured Pei Has High Adhesion, And The Model Is Not Easy To Warp. The Double-Sided Build Plate Combines The Advantages Of The Textured/Smooth Pel And Can Be Switched Freely..
Features
- Quality assurance 100% Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Gold PEI surface is of strong high temperature stability, flame retardant, heat resistance, high strength, wear resistance and good printing stability.The spring steel plate not only has high flatness but also has good elasticity, it is not deformed after repeated bending.
- Double Sided Two different build surfaces meet different printing needs. One side is PEl film with smooth surface, and has a good effect on the model bottom surface; Another side is the golden textured PEI has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEl and can be switched freely.
- More Stable Molding The high-strength spring steel plate is only 0.4mm thick, and the strong magnetic stickers can maintain high magnetic properties under high temperature, which reduces the inertia of the platform movement during printing and help the 3D printer run smoothly.
- Easy to remove With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the model can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Creality Ender 3 Removable PEI Magnetic Flexible Spring Steel Plate Heated Bed 235x235mm for Ender 3 S1/Ender 3 V2/Ender 3 V2 Neo/Ender 3/Ender 3 Pro/Ender 5/Voxelab Aquila C2 3D Printer
Asin: B08B84QSQG | Model: CR-PEI-235 | PartNumber: CR-PEI-235 | Ean: 0738627014222 | UPC: 738627014222
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety.
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Compatible With Pla、Petg、Peek、Abs And Any Other Filaments..
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance
- Compatible with PLA PETG PEEK ABS and any other filaments.
- No more tape, no more glue, no more shovel, and release your printing anxiety
- Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 1.57 pounds
See On Amazon #9
ENOMAKER Ender 3 PEI Sheet Magnetic Build Plate Flexible Spring Steel Mat Upgrades 3D Printer Bed Double Sided Texture Surface for Creality Ender 3 Pro,Ender 3 V2/Neo, Ender 3 S1/Pro,Ender 5/Pro/S1
Asin: B0C6QLF95J | Ean: 0764481226075 | UPC: 764481226075
【Bend To Remove Models】No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
【Bends Thousands Of Times Without Deformation】The Flex Spring Steel Pei Bed Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
【Double Sided Texture】Two Side Frosted Surface To Meet Your Printing Needs！Good Adhesion To The Pei Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
Features
- Magnetic, Flexible, Removable Steel Flex PEI Plate It can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3/ Ender 3X/Ender 3 Neo/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender-3 S1/Ender-3 S1 Pro/Ender 5/Ender 5 Pro,CR20/pro,CP-01,Creality K1 etc.
- Double Sided Texture Two side frosted surface to meet your printing needs Good Adhesion to the PEI surface, easy to remove the prints, flex slightly to pop your print right off.
- Bend to Remove Models No more tape, no more glue, no more shovel, and release your printing anxiety.
- Bends thousands of Times without Deformation The flex spring steel PEI bed is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAEKR
See On Amazon #10
SUNLU 3D Printer Bed,PEI Magnetic Build Textured Surface, Gold Frosted PEI Sheet for 3D Printers, 9.25x9.25inchs (235x235mm), 2 PCS PEI Sheet Black+Gold +1 PC Base Sticker Sheet
Asin: B0BWXGHC4K
③【Durability Easy To Clean 】Sunlu Pei Magnetic Build Plate Has Long Service Life Of Stainless Steel.Sunlu Pei 3D Printer Bed Adhesive Use A Soft Cloth To Clean The Dust. Gently Wipe The Stain With Low Concentration Of Alcohol..
⑤【Super Easy Print Removal】 Sunlu 3D Printer Platforms Pei Is Flexible And Magnetic, Making It Easy To Move Off The Platform And Take Away The Printing Model. The Prints Are Pretty Easy To Remove Once You're Done Printing..
④【Stronger Magnetic Ddhesion】Sunlu Pei 3D Printer Bed More Flexible And Resistant To Bending.Great First-Layer Adhesion,Make Sure The Model Can Be Firmly Attached To The Surface Of The Print Platform.Sunlu Magnetic 3D Printer Bed Platforms Had Solid Adhesion And The Print Went Well..
②【Frosted Surface】Sunlu Pei Magnetic Sheet Printing Board Has Smooth Surface, Which Will Not Leave Any Trace On The Bottom Of The Printed Material. There Is A Good Combination Of Hot Melt Material And Printing Layer, Which Can Reduce The Deformation Caused By Shrinkage And Avoid Warping..
Features
- Packing List (3PCS) SUNLU 3D printer PEI magnetic build plate size 235*235mm 9.25*9.25inch . 3 pieces sheet in total: 2 pieces of PEI Print Surface Sheet Gold+Black and 1 piece of sticker base sheet.
- Frosted Surface SUNLU PEI magnetic sheet printing board has smooth surface, which will not leave any trace on the bottom of the printed material. There is a good combination of hot melt material and printing layer, which can reduce the deformation caused by shrinkage and avoid warping.
- Durability Easy to Clean SUNLU PEI magnetic build plate has long service life of stainless steel.SUNLU PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.
- Stronger Magnetic Ddhesion SUNLU PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.SUNLU magnetic 3D printer bed platforms had solid adhesion and the print went well.
- Super Easy Print Removal SUNLU 3d printer platforms PEI is flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
See On Amazon #11
HICTOP Double Sided PEI Sheet Smooth/Textured PEI bed and Magnetic build plate with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2 Ender-3 3D printers
Asin: B08PFJKW5J | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Bed Is 235*235Mm（9.25*9.25Inch）, It Is Applicable With Creality 3D Printer Such As Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，Cr-20, Cr-20 Pro And Similarly Sized Machines..
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Hictop Textured Pei And The Smooth Pei Sheet Are Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 120℃ On The Bed..
Features
- 1 The HICTOP double sided PEI sheet is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The HICTOP textured PEI and the smooth PEI sheet are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP PEI bed is 235*235mm 9.25*9.25inch , it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2 Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro CR-20, CR-20 Pro and similarly sized machines.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #12
ENOMAKER Ender 3 S1 Plus PEI Spring Steel Magnetic Bed Plate Powder Painted Textured PEI Removable Flexible Mat Build Surface for CR-10 Smart Pro, Ender 3 MAX,CR-10/S, K1 MAX(310X315mm)
Asin: B0BV6FHQ34 | Model: ENO-Single-Painted-PEI-315 | PartNumber: ENO-Single-Painted-PEI-315 | Ean: 0764481225955 | UPC: 764481225955
No More Tape, No More Glue, No More Shovel, And Release Your Printing Anxiety..
When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Frosted Glossy Pei Coated Surface, Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off..
The Flex Spring Steel Pei Sheet Is Made Of High Quality Spring Steel That Won't Kink Or Warp When You Flex Them, They Just Return Back To Shape!.
Features
- Flexible, removable, can stick to magnetics very well. High strength and heat resistance.The size is 310*315mm(12.2*12.4inch), perfectly suitable for Ender 3 S1 Plus, CR-10 Smart,CR-10 Smart Pro, K1 MAX, also compatible for CR-10, CR-10S, Ender 3 MAX,,MP Maker Pro Long LK1/ PRO LK5 PRO, Hicto CR-10/Hero d3,A5 and A5x, Artilery Sidewinde X1,Tech FT-5,Elf CoreXY, SaiSmart CoreXY,Wahao D9 (300), Tenlog D3 PRO, Sulu S8,LK1/ PRO LK5 PRO or other similar size build plate, not the printing area.
- The flex spring steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
- No more tape, no more glue, no more shovel, and release your printing anxiety.
- Frosted glossy PEI coated surface, easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
- When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3d print bed goes through from print to print.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #13
POJECITY 3D Printer Textured PEI Spring Steel Sheet with Flexible Magnetic Sticker 235x235mm Surface for Aquila Ender 3, Pro, V2, S1, Ender 5, KP5M
Asin: B09MK7RHGW | Model: Y3 | PartNumber: Y3 | Ean: 0798107660202 | UPC: 798107660202
Easy To Install: Pei Spring Steel Sheet Made Of High Quality Stainless Steel And Strong Magnetic Base, Stick The Magnetic Base To Your Build Plate By Peeling Off The Backing Paper And Sticking It To Your Bed, Then Place The Steel Plate Onto The Magnetic Sheet. Keep The Side With Pei Facing Up To Print On. Please Peel Off The Protective Film On The Surface Before Printing..
We Have Applied Pei Sheet On The Build Plate By Machine, So You Don't Need To Worry About The Performance. If You Receive The Package But Find The Air Bubbles Or Scratches, They Are Only On The Surface And Won’T Effect Printing Performance. The Pei Is Textured, So Scratches Over Time From Printing Will Not Show Up In Your Print. The Textured Surface Leaves An Eye Catching, Professional Finish To Your Print..
When Printing Is Complete, Let The Pei Sheet Cool Down Enough (To Around 40C), Then Easily Remove The Prints. If The Print Is Still Stuck, Just Gently Bend The Steel Plate And Pop It Off! After Many Times Printings, Lightly Scour The Surface Of The Pei With Some Mild Steel Wool With 400 Grit Will Have Great Adhesion Or Use Alcohol To Clear It And Let It Dry..
High Quality Build Plate: The Custom-Designed Textured Pei Material Let’S Your Prints Easily Adhere To The Flexible Print Bed..
Features
- Size: Magnetic plate 235mmx235mm/9.2x9.2 inch for Ender 3, Ender 3 Pro, Ender 3 v2, Ender 3 S1, Longer LK4, LK4 Pro, and most other 235mm 3D printers.Note: it is single side, one side is textured,there is a logo on the palte,please be care.
- High quality build plate: The custom-designed textured PEI material let s your prints easily adhere to the flexible print bed.
- Easy to install: PEI spring steel sheet made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.
- When printing is complete, let the PEI Sheet cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
- We have applied PEI sheet on the build plate by machine, so you don't need to worry about the performance. If you receive the package but find the air bubbles or scratches, they are only on the surface and won t effect printing performance. The PEI is textured, so scratches over time from printing will not show up in your print. The textured surface leaves an eye catching, professional finish to your print.
- See more on Amazon...
Brand: POJECITY | Manufacturer: k1
See On Amazon #14
ENOMAKER Ender 3 S1 Plus PC Spring Steel Magnetic Bed Plate Removable Flexible Mat Build Surface for CR-10 Smart Pro,CR-10/S, Ender 3 MAX(310X315mm)
Asin: B0BV6DZ3HL | Model: ENO-PC-Magnetic-Steel-S315 | PartNumber: ENO-PC-Magnetic-Steel-S315 | Ean: 0764481225962 | UPC: 764481225962
【Good Ahesion】The Pc Texture Surface With Good Adhesion, The Model Can Be Firmly Attached To The Surface Of The Print Platform..
【Wide Compatibility】The Size Is 310*315Mm(12.2*12.4Inch), Perfectly Suitable For Ender 3 S1 Plus, Cr-10 Smart,Cr-10 Smart Pro,Also Compatible For Cr-10, Cr-10S, Ender 3 Max,,Mp Maker Pro Long Lk1/ Pro Lk5 Pro, Hicto Cr-10/Hero D3,A5 And A5x, Artilery Sidewinde X1,Tech Ft-5,Elf Corexy, Saismart Corexy,Wahao D9 (300), Tenlog D3 Pro, Sulu S8,Lk1/ Pro Lk5 Pro Or Other Similar Size Build Plate, Not The Printing Area..
【Durable】The Spring Steel Can Be Flexed And Bended Thousands Of Times Without Deformation..
【Easy To Remove Printed Models】The Printed Models Can Easily Be Removed By Bending The Spring Steel Sheet..
Features
- Magnetic & Removable The innovative platform included two plates, the top plate is spring steel plate with PC surface, the bottom plate is magnetic plate with sticker.The top plate very east to attach or remove from the magnetic bottom plate.
- Easy to Remove Printed Models The printed models can easily be removed by bending the spring steel sheet.
- Good Ahesion the PC texture surface with good adhesion, the model can be firmly attached to the surface of the print platform.
- Durable The spring steel can be flexed and bended thousands of times without deformation.
- Wide Compatibility The size is 310*315mm(12.2*12.4inch), perfectly suitable for Ender 3 S1 Plus, CR-10 Smart,CR-10 Smart Pro,also compatible for CR-10, CR-10S, Ender 3 MAX,,MP Maker Pro Long LK1/ PRO LK5 PRO, Hicto CR-10/Hero d3,A5 and A5x, Artilery Sidewinde X1,Tech FT-5,Elf CoreXY, SaiSmart CoreXY,Wahao D9 (300), Tenlog D3 PRO, Sulu S8,LK1/ PRO LK5 PRO or other similar size build plate, not the printing area.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #15
ENOMAKER Ender 3 S1 PC Spring Steel Magnetic Bed Plate Removable Sheet Flexible Mat Build Surface for Ender 3 /Pro/V2/S1/Neo Ender 5/Pro CR20 CP-01 K1
Asin: B09SQ6LP66 | Model: ENO-PC-Magnetic-Steel | PartNumber: ENO-PC-Magnetic-Steel | Ean: 0705300792210 | UPC: 705300792210
【Good Ahesion】The Pc Texture Surface With Good Adhesion, The Model Can Be Firmly Attached To The Surface Of The Print Platform..
【Wide Compatibility】The Size Is 235*235Mm(9.25*9.25Inch),Suitable For Ender 3, Ender 3 Neo, Ender 3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender3 S1, Ender3 S1 Pro, Ender 5, Ender-5 Pro,Cp-01, Cr-20, Cr20 Pro, Creality K1 And Similar Sized Bed,Artillery Genius,Voxelab Aquila,Geeetech A10 Series,Biqu-B1 Etc..
【Durable】The Spring Steel Can Be Flexed And Bended Thousands Of Times Without Deformation..
【Easy To Remove Printed Models】The Printed Models Can Easily Be Removed By Bending The Spring Steel Sheet..
Features
- Magnetic & Removable The innovative platform included two plates, the top plate is spring steel plate with PC surface, the bottom plate is magnetic plate with sticker.The top plate very east to attach or remove from the magnetic bottom plate.
- Easy to Remove Printed Models The printed models can easily be removed by bending the spring steel sheet.
- Good Ahesion the PC texture surface with good adhesion, the model can be firmly attached to the surface of the print platform.
- Durable The spring steel can be flexed and bended thousands of times without deformation.
- Wide Compatibility the size is 235*235mm(9.25*9.25inch),suitable for Ender 3, Ender 3 Neo, Ender 3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender3 S1, Ender3 S1 Pro, Ender 5, Ender-5 Pro,CP-01, CR-20, CR20 Pro, Creality K1 and similar sized bed,Artillery Genius,Voxelab Aquila,Geeetech A10 series,BIQU-B1 etc.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #16
Comgrow PEI Double Sided Magnetic Heated Bed, PEI Spring Steel 235x235mm, Smooth and Textured PEI Sheet for ELEGOO Neptune 3 Pro/4/Anycubic Kobra/Creality Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo
Asin: B09TVGDJYP
Wide Compatibility - If The Magnetic Sticker Is Stuck To The Bed, It Won't Be Easy To Remove. Therefore, Please Make Sure That Measure It Correctly First Before Removing The Adhesive And Stick To The 3D Printer Heated Bed. Suitable For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
High-Quality Material - When The Pei Bed Is Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print..
Easy Mode Lremoval - Easy To Adhere To The Printing Surface, The Ender 3 Pro Pei Bed Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off. The Flexible Surface Can Easily Be Cut To Any Dimension Making It Perfect For All Build Sizes And All Fdm Printer Models..
Wear Resistance - The Golden Yellow Matte Surface Of Pei Has Strong High-Temperature Stability And High Printing Stability. Our Pei Spring Steel 235X235mm Flame Retardant Has High-Temperature Resistance, High Strength, Wear Resistance, And Electrical Insulation Properties..
Features
- EXCELLENT FLATNESS - The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use).
- WEAR RESISTANCE - The golden yellow matte surface of PEI has strong high-temperature stability and high printing stability. Our PEI spring steel 235x235mm flame retardant has high-temperature resistance, high strength, wear resistance, and electrical insulation properties.
- WIDE COMPATIBILITY - If the magnetic sticker is stuck to the bed, it won't be easy to remove. Therefore, please make sure that measure it correctly first before removing the adhesive and stick to the 3d printer heated bed. Suitable for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro 3D Printer. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- EASY MODE LREMOVAL - Easy to adhere to the printing surface, the ender 3 Pro PEI bed is easy to remove the prints and flex slightly to pop your print right off. The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.
- HIGH-QUALITY MATERIAL - When the pei bed is used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #17
IdeaFormer-3D Double Sided Textured PEI Spring Steel Plate 235x235mm, No Magnetic Build Plate Flexible PEI Sheet for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 5/Ender 5 Pro
Asin: B0BYD683TW | Model: DBS-235 | PartNumber: DBS-235
【High Durability】The Flexible Pei Spring Steel Plate Can Be Resistant To 200°C And Has High Strength With No Deformation..
【Easy Installation】Put Pei Build Plate On The Hot Bed Of Your 3D Printer, And It Is Ready To Use. (This Spring Steel Sheet Does Not Include Magnetic Plate.).
【Compatible 3D Printers 】Our Double-Sided Textured Pei Spring Steel Sheet Fits The Size Of 235 X 235Mm, Such As For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, Cr20, Cr20 Pro, Ender 5, Ender 5 Pro, Mega Pro, Mega Zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Odin-5 F3 Etc..
【Compatible Filaments】Pei Build Plate Fits Most Filaments Such As Pla / Abs / Petg / Tpu / Nylon Etc..
Features
- Textured PEI Sheet - No Magnetic Build Plate Double sided textured PEI build plate coating adopts high temperature spraying process, the coating of the print plate is not easy to fall off and scratch. It bends thousands of times without being out of shape. There is no magnetic plate.
- Compatible Filaments PEI build plate fits most filaments such as PLA / ABS / PETG / TPU / nylon etc.
- High Durability The flexible PEI spring steel plate can be resistant to 200 C and has high strength with no deformation.
- Compatible 3D Printers Our double-sided textured PEI spring steel sheet fits the size of 235 x 235mm, such as for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Neo, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Mega Pro, mega zero, Kobra, Aquila, Aquila C2, Aquila S2, Aquila X2, Neptune 2, Neptune 2S, Neptune X, Odin-5 F3 etc.
- Easy Installation Put PEI build plate on the hot bed of your 3D printer, and it is ready to use. (This spring steel sheet does not include magnetic plate.)
- See more on Amazon...
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #18
Double Side Textured PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive for Creality Ender 3(NEO)/Ender 3 Pro/Ender 3 V2(NEO) /Ender 3 S1(Pro) /Ender 5 S1 /Ender 5 (pro) 3D Printer Bed
Asin: B0C3WNM9CD | Model: PEI-235 | PartNumber: PEI-235 | Ean: 0741365796176 | UPC: 741365796176
✅【Wide Application】Compatible With Printing Area Below 235Mm Size Printers As Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 Pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ Cr-20/ Cr-20 Pro/ Elegoo Neptune3 (Pro)/ Anycubic Kobra.,Etc.
✅【More Practical】We Use 75% Thicker Pei And 25% Thicker Spring Steel Than Our Leading Competitors. More Durable To Handle The Tough Conditions Of 24/7 Printing. Wear-Resistant And Scratch-Resistant, Easy To Clean,Also Anti-Scratch And Dustproof.
✅【100% Satisfaction Commitment】We Stand Behind The Quality Of Our Products. If For Any Reason You Are Not Satisfied With Your Purchase, Please Contact Us. We Provide 90-Day Money Back And 1 Year Warranty. 100% Satisfaction Guarantee For Risk-Free Shopping!.
✅【Enhance Printing Effect】Textured Pei Coating Would Make The Bottom Of Your Prints Show A Matte Texture And Retain The Frosted Feeling.Helps To Stick On The Bed More Firmly.Works For Most Fdm Materials In The Market, Like Pla, Pla+, Petg, Abs, Tpu, Asa, Nylon.
✅【Excellent Adhesion】Pei Coating Textured Surface On Both Side.Which Performs Excellent In Print Adhesion.Surface Temp Resistant Up To 120℃,Which Could Meet 99% Filament Material Needs..
Features
- EASY REMOVAL Contains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints.
- EXCELLENT ADHESION PEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120 ,which could meet 99% filament material needs.
- WIDE APPLICATION Compatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ CR-20/ CR-20 Pro/ ELEGOO Neptune3 (Pro)/ Anycubic Kobra.,etc
- ENHANCE PRINTING EFFECT Textured PEI coating would make the bottom of your prints show a matte texture and retain the frosted feeling.helps to stick on the bed more firmly.works for most FDM materials in the market, like PLA, PLA+, PETG, ABS, TPU, ASA, Nylon
- MORE PRACTICAL We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. more durable to handle the tough conditions of 24/7 printing. Wear-Resistant and Scratch-Resistant, easy to clean,also anti-scratch and dustproof
- 100% SATISFACTION COMMITMENT We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 90-day money back and 1 YEAR warranty. 100% Satisfaction Guarantee for risk-free shopping!
- See more on Amazon...
First Available: 08/08/2023
Brand: FugaCity | Manufacturer: Fugacity LLC
Dimensions: 0.39 x 9.25 x 9.25 Inches | Weight: 1.01 pounds
Warranty: 180D Warranty & Free Return from date purchased
See On Amazon #19
BIQU Upgrade SSS Spring Steel Sheet with Magnetic Sticker, 235X235MM Ultra-Flexible Removable Surface Heated Bed Platform 3D Printer Parts Printing Build Plate for Ender 3/Ender3 Pro/Ender 5/B1
Asin: B08G1BN1BK | Model: BIQU SSS | PartNumber: BIQU SSS | Ean: 0779303890228 | UPC: 779303890228
❤【Easy To Use And Flexible】The Sss Heated Bed Surface Has Certain Flexibility And Can Be Bent. After Cooling, The Model Is Loose And Easy To Take..
❤【12 Months Longer Warranty】Package Include: 1X Sss Spring Steel Sheet. 1X Magnetic Sticker. Strict Testing For All Components Before Delivery.Thank You Very Much For Your Choice And Trust. If You Have Any Questions About The Product, Can You Contact Us First? Give Us The Opportunity To Understand Your Needs, And We Will Do Our Best To Answer Questions And Solve Problems For You..
❤【Strong Adhesion】After The Hot Bed Is Heated, The Model Is Stable On The Hot Bed,And Not Easy To Loose And Fall Off. The Surface Of The Build Plate Is Wear-Resistant, And The Coating Is Not Easy To Wear..
❤【Applicable Filaments Types】The Heated Bed Platform Can Print A Variety Of Filaments, Such As Pla, Petg, Tpu, Abs, Etc. The High-Temperature-Resistant Spring Steel Plate Can Withstand Temperatures Above 200°..
Features
- APPLICABLE PRINTER MODEL The size of the spring steel sheet is 235x235mm, which is suitable for any 3D printer with a printing platform size of 235*235mm. Such as Ender 3/Ender 3X /Ender 3 Pro/Ender 3 Prox/Ender 5 /Ender 5 Pro /BIQU B1 etc.
- APPLICABLE FILAMENTS TYPES The Heated Bed Platform can print a variety of filaments, such as PLA, PETG, TPU, ABS, etc. The high-temperature-resistant spring steel plate can withstand temperatures above 200 .
- EASY TO USE AND FLEXIBLE The SSS Heated bed Surface has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- STRONG ADHESION After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off. The surface of the build plate is wear-resistant, and the coating is not easy to wear.
- 12 MONTHS LONGER WARRANTY Package include: 1X SSS Spring Steel Sheet. 1X Magnetic sticker. Strict testing for all components before delivery.Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
Dimensions: 0.00 x 9.25 x 9.25 inches
See On Amazon #20
BIQU PEI Sheet Removable Flexible Heated Bed 235x235mm Spring Steel Plate Magnetic Sticker Build Surface 3D Printer Hotbed Parts for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Neptune 3
Asin: B0BRSJQZPR
⭐Easy To Stick And Remove: No Need For Other Tools, Upgraded Magnetic Build Surface Provides The Best Adhesion. Easy To Stick And Remove Prints, Just Bend It A Little And It Will Pop Up Immediately, Fully Eliminate Your Printing Anxiety.
⭐High Performance: Pei Coating Is Done By Machine, So You Don't Need To Worry About Performance. If You Receive Your Package And Find Air Bubbles Or Scratches, They Are Only On The Surface And Will Not Affect Printing Performance. If You Have Any Concerns, You Can Also Contact Our Technical Staff At Any Time. Pei Is Textured So Print Scratches Won't Show Up In Your Prints Over Time. The Textured Surface Leaves Your Prints With An Eye-Catching, Professional Finish..
⭐Easy To Install: Simply Stick The Magnetic Sheet To The Heated Bed And Place The Flexible Pei Build Plate Platform With Pei Surface On Top. The Surface Of The Magnetic Plate Holds The Flexible Base Very Tightly..
⭐High Compatibility: Pei Steel Plate Is Compatible With Pla/Petg/Peek/Abs And Any Other Filament, Size: 235X235x0.4Mm (9.25X9.25In), Widely Compatible With Ender 3/ Ender 3 S1/ Ender 3 V2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. Pei Sheets Can Withstand The Countless Thermal Cycles A 3D Printer Bed Goes Through From Print To Print..
Features
- High-Quality Materials: PEI sheet is made of high-quality spring steel, PEI surface, golden yellow matte surface has strong high temperature stability, high printing stability, flame retardant, high temperature resistance, high strength and other properties, flexible and removable, it is not easy to deform. adheres well
- High Compatibility: PEI steel plate is compatible with PLA/PETG/PEEK/ABS and any other filament, size: 235x235x0.4mm (9.25x9.25in), widely compatible with Ender 3/ Ender 3 S1/ Ender 3 v2/ Ender 3 Pro/ Ender 5/ Ender 5 Pro. PEI sheets can withstand the countless thermal cycles a 3D printer bed goes through from print to print.
- Easy to Stick and Remove: No need for other tools, upgraded magnetic build surface provides the best adhesion. easy to stick and remove prints, just bend it a little and it will pop up immediately, fully eliminate your printing anxiety
- Easy to Install: Simply stick the magnetic sheet to the heated bed and place the flexible PEI build plate platform with PEI surface on top. The surface of the magnetic plate holds the flexible base very tightly.
- High Performance: PEI coating is done by machine, so you don't need to worry about performance. If you receive your package and find air bubbles or scratches, they are only on the surface and will not affect printing performance. If you have any concerns, you can also contact our technical staff at any time. PEI is textured so print scratches won't show up in your prints over time. The textured surface leaves your prints with an eye-catching, professional finish.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon
Looking For Something Else?
Search