Happymodel 2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver Tiny ExpressLRS for Long Rang FPV Racing Drone (EP1DUAL TCXO)
Asin: B0BMFVZ6D9 | Model: EP1DUAL TCXO | PartNumber: EP1DUAL TCXO | Ean: 0755621857150 | UPC: 755621857150
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ep1 Dual Tcxo Receiver :Default Firmware Out Of Factory: Unified_Esp32_2400_Rx Could Upgrade To Happymodel Ep1 Dual 2400 Rx 3.0Fw.
Features
- EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply temperature compensated crystal oscillator , accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable.
- EP1 Dual TCXO Receiver :Default Firmware out of factory: Unified_ESP32_2400_RX Could upgrade to HappyModel EP1 Dual 2400 RX 3.0FW
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.00 x 6.00 x 5.00 inches
See On Amazon Similar To Happymodel 2.4G ELRS EP1 EP2
#1
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP2RX)
Asin: B092J1VP6S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165333 | UPC: 700512165333
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
The Pp Rx Is Designed By @Jye Smith From Expresslrs Development Team. Its Main Hardware Architecture Is Stm32l432kbu6 Mcu And Sx1280 Rf Chip. It Has A Built-In Ceramic Antenna, Which Is Super Light And Small In Size..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #2
HAPPYMODEL ELRS 2-4G ExpressLRS EPI/EP2 RX Nano Long Range Receiver SX1280 EXPRESSLRS for Racing Drone (EP1 RX)
Asin: B095JQ8F9J | Model: ELRS | PartNumber: ELRS | Ean: 0700512167825 | UPC: 700512167825
Peak-Gain Difference: Ep2 _Rx Is 3.7Db, While Ep1_Rx Is 2.23Db..
Elrs Receiver Comfortable With Racing, Long Range Dorne And Tinywhoop, As They Are Lightweight , Nano Size, And With Low-Latency And High-Refresh-Rate Rf Module..
Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6Mm, Sx1280imltrt Rf Module, Receive Refresh Rate: 25- 500, Type: Ism..
Mcu: Ep1 / Ep2_Rx With Esp8285 Mcu. Frequency Range: 2400 To 2500..
Features
- The Happymodel 2-4G ELRS nano series receiver is an open source program based on ExpressLRS, pre-loaded firmware are all beta versions.
- MCU: EP1 / EP2_RX with ESP8285 MCU. Frequency Range: 2400 to 2500.
- Peak-Gain Difference: EP2 _RX is 3.7dB, while EP1_RX is 2.23dB.
- Receiver Common Feature: Working Voltage 5V , Dimension 10*10*6mm, SX1280IMLTRT RF Module, Receive Refresh Rate: 25- 500, Type: ISM.
- ELRS Receiver Comfortable with racing, long range dorne and tinywhoop, as they are lightweight , Nano size, and with Low-latency and high-refresh-rate RF module.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #3
Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX)
Asin: B092J2QJ8S | Model: 2.4GHz RX SX1280 EXPRESSLRS | PartNumber: 2.4GHz RX SX1280 EXPRESSLRS | Ean: 0700512165326 | UPC: 700512165326
Brand: HAPPYMODEL | Manufacturer: Happymodel
See On Amazon #4
Happymodel 2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver Tiny ExpressLRS for Long Rang FPV Racing Drone (EP1 TCXO)
Asin: B0BMFSH7DT | Model: EP1 TCXO | PartNumber: EP1 TCXO | Ean: 0755621857099 | UPC: 755621857099
Ep2 Tcxo Receiver :Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version.
Ep1 Dual Tcxo Receiver :Default Firmware Out Of Factory: Unified_Esp32_2400_Rx Could Upgrade To Happymodel Ep1 Dual 2400 Rx 3.0Fw.
Ep1 Tcxo Receiver :Default Firmware Out Of Factory: Happymodel_Ep_2400_Rx V2.2 Version.
Features
- EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply temperature compensated crystal oscillator , accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable.
- EP1 TCXO Receiver :Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version
- EP2 TCXO Receiver :Default Firmware out of factory: HappyModel_EP_2400_RX V2.2 version
- EP1 Dual TCXO Receiver :Default Firmware out of factory: Unified_ESP32_2400_RX Could upgrade to HappyModel EP1 Dual 2400 RX 3.0FW
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.00 x 6.00 x 5.00 inches
See On Amazon #5
Happymodel ExpressLRS FPV Long Range Module ELRS ES900TX 915MHz Compatible for Radiomaster TX16S and Jumper T12 T16 T18 FPV Micro Mini Long Range Drones (ES900TX+ES900RX Combo Kit)
Asin: B0CKZ2F29V | Ean: 0755621759959 | UPC: 755621759959
The Elrs Es900tx Module Coming With A 2006 Fan, It Would Working Automatically When The Tx Power Is 250Mw..
Based On The Open Source Software Expresslrs, Es900tx And Es900rx Modules Are Characterized By Ultra-Long Range, Stable Operation And Low Latency..
As Expresslrs Firmware Is Constantly Being Improved And Updated, We Strongly Recommend That You Use The Expresslrs Configurator Update Firmware To Get The Best Experience..
Customized Heat Sink , And Also Reserve The Installation Position Of The 2006 Fan Which Can Help The Happymodel Transmitter Module To Operate Stably Under High Power Conditions..
Features
- This ELRS module compatible with most OpenTX remote controllers, especially suitable for Radiomaster TX16S and Jumper T12 T16 T18 series remote controllers, basically plug and play.
- Customized heat sink , and also reserve the installation position of the 2006 fan which can help the happymodel transmitter module to operate stably under high power conditions.
- The ELRS ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mW.
- As ExpressLRS firmware is constantly being improved and updated, we strongly recommend that you use the ExpressLRS configurator update firmware to get the best experience.
- Based on the open source software ExpressLRS, ES900TX and ES900RX modules are characterized by ultra-long range, stable operation and low latency.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: HAPPYMODEL
Dimensions: 1.00 x 5.00 x 4.00 Inches
See On Amazon #6
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP1 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5Z9FZGZ | Ean: 0755621760252 | UPC: 755621760252
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 Inches
See On Amazon #7
HAPPYMODEL ES24TX Pro ELRS Micro TX Module 2.4G 1000mW with Cooling Fan RGB LED for FPV Drones
Asin: B09M71SSTS | Model: ZZ45639 | PartNumber: ZZ45639 | Ean: 0768432292140 | UPC: 768432292140
Application: This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay..
Rf Output Power >30Dbm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V..
Customized Antenna: Happymodel 2.4Ghz Moxon Antenna, Antenna Gain 4.18Dbi..
Upgraded Part: Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module..
Features
- Upgraded Version?This ES24TX Pro Module is the upgraded version of ELRS Micro TX Module, it`s plug and play.
- Upgraded Part: Max output up to 1000mw, reserved Cooling Fan and RGB LED module.
- Application: This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay.
- Customized Antenna: Happymodel 2.4GHz Moxon antenna, Antenna gain 4.18dBi.
- RF Output Power >30dBm, Receiver Refresh Rate 25Hz - 500Hz, Power Supply Voltage 5V~10V.
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
Dimensions: 1.20 x 5.51 x 5.11 inches
See On Amazon #8
HAPPYMODEL 2.4G ExpressLRS ELR ES24TX Slim Pro TX Module Compatible with X-lite Tango2
Asin: B09FXXTHK6 | Model: Z44889 | PartNumber: Z44889
This Slim Pro Module Comes With An Aluminum Alloy Shell And Is Equipped With A Cooling Fan That Automatically Works When The Module Is Working At 250M-W. Antenna Gain: 1.87Dbi..
Can Updated By Expresslrs Configurator Or Update The Firmware Via Connecting The Wifi Hot Spot Of The ?Expresslrs Tx Module?, Visit "10.0.0.1" By Browser (Password:Expresslrs)..
Open Source Expresslrs; Long Range, Low Latency And High Re-Flashed Rates; Telemetry Data Transmission Supported..
Supports Up To 1000M-W Rf Power (T-Lite Radio And Tango2 Radio Need External Power Supply) , Very Useful For Long Range Fpv..
Features
- The ES24TX Slim Pro Module Pre-load the ExpressLRS firmware and it?s plug and play, compatible with Frsky X-lite/X-lite pro/X9 Lite , TBS Tango2.
- Supports up to 1000m-W RF power (T-lite radio and Tango2 radio need external power supply) , very useful for Long Range FPV.
- This Slim Pro module comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250m-W. Antenna gain: 1.87dBi.
- Open source ExpressLRS; Long range, Low latency and High re-flashed Rates; Telemetry data transmission supported.
- Can updated by ExpressLRS configurator or update the firmware via connecting the Wifi hot spot of the ?ExpressLRS TX Module?, visit 10.0.0.1 by browser (password:expresslrs).
- See more on Amazon...
Brand: HAPPYMODEL | Manufacturer: HAPPYMODEL
See On Amazon #9
HappyModel Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX+EP2RX)
Asin: B0B689YL5F | Ean: 0755621760191 | UPC: 755621760191
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple ..
Features
- The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple .
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 inches
See On Amazon #10
HappyModel ES24TX Pro 1000mW 2.4G ExpressLRS ELRS Micro TX Module + EP2 RX ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver for FPV Drones
Asin: B0B5ZXDQZN | Ean: 0755621760221 | UPC: 755621760221
On The Basis Of Pp Rx, We Have Developed The Nano 2.4Ghz Rx Of Esp8285 Version Named Ep1 And Ep2. The Rf Module Of Ep1/Ep2 Is The Same Like Pp Rx And Use Esp8285 Mcu . So You Can Upgrade Firmware By Wifi , That's Too Simple.
Due To The Low-Latency And High-Refresh-Rate Rf Module, They Are Very Comfortable For Fpv Race And Long Range Fpv. And Very Suitable For Tiny Whoop Because Of The Ultra Light And Nano Size..
Max Output Up To 1000Mw, Reserved Cooling Fan And Rgb Led Module. This Micro Tx Module Support Most Of The Opentx Radio Transmitter That With Micro Jr Bay. And This Time The Es24tx Pro Module Comes Completely Assembled Before Out Of Factory..
Features
- The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
- Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of factory.
- On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple
- Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
- See more on Amazon...
Brand: LIBOQIAO | Manufacturer: Happymodel
Dimensions: 1.53 x 9.44 x 7.87 Inches
See On Amazon
Looking For Something Else?
Search